Windows authentication fails from Mac browser when LB is in between

(1)     A new instance of Windows server 2008 R2 is taken and IIS server is installed.
On IIS server, ‘Windows Authentication’ is enabled and all the other authentication (anonymous, basic) is disabled.
(2)     From Safari browser on Mac, a IIS resource (protected by Windows Authentication) is accessed by directly accessing IIS server. The resource access is successful.
(3)     Now a Load Balancer is configured in front of IIS server.
(4)     From Safari browser on Mac, a IIS resource (protected by Windows Authentication) is accessed by accessing load balancer. Here IIS server prompts for username and password.
Seems that authentication negotiation is failing between Mac browser and IIS when LB is in between. Can somebody pls know the reason / resolution for this issue ?
Thanks

I was just helping someone with this same issue, and found this post searching for answers. I think it's a problem with your web hosting provider. It looks like whois is saying you both use readyhosting.net, is that right?
If you go into the developer options and override the User Agent string, you can make the issue start and stop. When the user agent string starts with "Mozilla/5.0 (Windows NT 6.1", then the page with show the error message. If it starts with anything else, then it works fine.
This, and the fact that you did not make any changes to your site makes it sound like your hosting provider changed something. You probably need to have them fix it somehow.

Similar Messages

AD FS Token issuance endpoints for Windows authentication fail to open

Hi,
I have had issue with AD FS and after turning tracing on, I realized that the AD FS endpoints to issue token based on windows authentication were all failing with an error like:
A WS-Trust endpoint that was configured could not be opened.
Additional Data
Address: https://adfsvm.dub01.local/adfs/services/trust/13/windowstransport
Mode: WindowsTransport
Error:
MSIS0006: A Service Principal Name is not registered for the AD FS service account.
I have tried to register an SPN for the AD FS service using the following command (I have found the AD FS Service Name in the Federation Service Properties as in the screenshot hereunder) but it fails with the following error.
setspn -a host/ADFSVM.dub01.local DUB01\ADFSService
Checking domain DC=dub01,DC=local
CN=ADFSVM,CN=Computers,DC=dub01,DC=local
WSMAN/ADFSVM
WSMAN/ADFSVM.dub01.local
TERMSRV/ADFSVM
TERMSRV/ADFSVM.dub01.local
RestrictedKrbHost/ADFSVM
HOST/ADFSVM
RestrictedKrbHost/ADFSVM.dub01.local
HOST/ADFSVM.dub01.local
Duplicate SPN found, aborting operation!
Now I have come to realise that the Federation Service name is the same as the computer name but:
I dont know if that is an issue
I don't recall having been offered to give a particular name when installing AD FS
This is the first time I install AD FS. Is there anyone who could give me a pointer?
Thanks.
Francois

the ADFS federation service FQDN should NOT be the same as the hostname. You will run into Kerberos issues because of duplicate SPNs as you have found
https://jorgequestforknowledge.wordpress.com/2013/09/06/duplicate-spn-breaks-trust-between-clientserver-and-active-directory/
When installing ADFS you should specify a federation service FQDN and a service account. When using the GUI to install ADFS, (if I'm not mistaken) the federation service FQDN is derived from the selected cert in the GUI. If that cert had a subject name being
the hostname, you get this scenario. Instead, install an SSL cert, a token signing cert and a token encryption cert BEFORE the installation and use powershell to install/configure ADFS as it gives you more control.
As an example see (ADFS v2):
https://jorgequestforknowledge.wordpress.com/2012/05/08/installing-and-configuring-adfs-v2-as-an-sts-server-part-1/
https://jorgequestforknowledge.wordpress.com/2012/05/09/installing-and-configuring-adfs-v2-as-an-sts-server-part-2/
https://jorgequestforknowledge.wordpress.com/2012/05/10/installing-and-configuring-adfs-v2-as-an-sts-server-part-3/
Install-ADFSFarm
https://technet.microsoft.com/en-us/library/dn479416.aspx
Cheers,
Jorge de Almeida Pinto
Principal Consultant | MVP Directory Services | IAM Technologies
COMMUNITY...:
DISCLAIMER: This post is provided "AS IS" with no warranties of any kind, either expressed or implied, and confers no rights! Always evaluate/test yourself before using/implementing this!

Export to LMS fails from Mac

I have a project publishing to ComplianceWire, a Scorm 1.2 compatible Windows-based LMS.
When published as Scorm 1.2 from Windows, it imports to the LMS and works fine. The same project published with the same settings from Mac fails to import, causing server IO errors with "bad characters in path" messages.
Our testing tells us it is not our assets, but Captivate's Mac publishing which is the problem.
We are a Mac shop, so obviously a serious blow to productivity, not to mention that it means I have to maintain a Captivate for Windows installation, which means that I can't have Creative Cloud on my MacBook. This is a bad deal all the way around.

Post Author: Ranjit
CA Forum: Exporting
Not sure if my problem was similar.
My problem was pdf report used to display 5 pages on end users comp and 2 pages on mine.
Problem was with Acrobat reders page size setting. I changed it through the reporting application and problem was solved. I dont know how and where to change settings in Acrobat reader.
Hope this directs your efforts
Ranjit

Misled by Diagnostic help from Mac OS when having an ethernet-problem

I just solved a nasty problem that took me almost a day and that was caused by a wrong message from OS (10.4.5).
What happened:
Along with the move of my mac mini to another room in the house, I had to redirect the ethernet-cable for my adsl.
After doing this I connected my computer and adsl worked fine. The next day however, my adsl-connection had gone! I assumed it were the cables or the connectors that had not been properly fixed and might have been set loose due to some moving of furniture after the initial fixing. I checked the fixings, replaced the R-45 connector and took off a piece of cable that looked (just a tiny bit) damaged. But after all this, the connection still wasn't there.
Now, there is a diagnostic help that appears in the Safari-browser when you don't have a connection. This diagnostic help issued the message that the 'ethernet-cable is not connected'. It stunned me, because all connections seemed well by now.
Then, I took my computer and hooked it onto another cable in the house that I knew was working well: same thing! No connection. After that I realised my OS had fooled me. It was not the cable, nor the connectors, it was a wrong message from diagnostic help! I ran network configuration assistant and the thing worked in 2 minutes. So I wasted hours on messing with cables and 13 euros on a connector, because of a faulty message.
Is there a moderator that can explain why this has happened as it did? maybe something to fix in an upgrade?
mac mini 1,42/1GB Mac OS X (10.4.5)

Sounds like a bad preference file. Move the com.apple.installer.plist file out of /username/Library/Preferences/ to your Desktop. Now, mount the image. If that works, problem solved. If not, create a new admin user account, log into it, and try to mount the image. If it works, then you'll have to resolve the conflict within the original account. Report back with the results.

Proxy authentication failed in MAc OS 10.8.3

I am using firefox 21.0 in Mac os 10.8.3.We are using proxy server for browsing.While browsing internet firefox prompts for proxy username and password,after entering the correct user name and password it shows proxy authentication failed,Another round of authentication required.The same user name and pssword in working fine in safari in the same mac book.
Plz Help

Hi There!
Please check the solution mentioned here:
http://kb.globalscape.com/KnowledgebaseArticle10522.aspx
I remember someone else also suggested setting this option '''network.automatic-ntlm-auth.allow-proxies''' to '''false '''as well.
Hope this helps!
Have a good one!
Dawid

Discussion Server Authentication Failed From Inside FMW App

Hi Community,
My Env:
Webcenter 11.1.1.3.0
Weblogic 10.3.3
The discussion server shipped with webcenter suite is Jive Forums Silver 5.5.20 .2-oracle.
I wired the discussion server to embedded LDAP server of my weblogic server, and deployed an app that utilize the discussion service.
But when accessing the app page, I got an exception "failure to authenticate the user pbrown, due to: Authentication Failed".
The users do exist in LDAP server and I can login to http://server:8890/owc_discussions page with that users, I also granted all privileges to the users in jive console, but it doesn't work inside the app.
My Jive server log:
[2010-09-05T23:21:22.816-07:00] [WLS_Services] [ERROR] [] [org.codehaus.xfire.handler.DefaultFaultHandler] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000If_hC7s5e_Vau1q2UH1CWBaI0000E_,0] [APP: owc_discussions#11.1.1.2.0] [dcid: bafcaeab2cd82008:-b3c6f44:12ad6d55fae:-8000-00000000000003c6] Fault occurred![[
com.jivesoftware.base.UnauthorizedException: Authentication Failed
at com.jivesoftware.forum.webservices.server.xfire.PermissionHandler.acquireAuthToken(PermissionHandler.java:194)
at com.jivesoftware.forum.webservices.server.xfire.PermissionHandler.invoke(PermissionHandler.java:98)
at org.codehaus.xfire.handler.HandlerPipeline.invoke(HandlerPipeline.java:131)
at org.codehaus.xfire.transport.DefaultEndpoint.onReceive(DefaultEndpoint.java:64)
at org.codehaus.xfire.transport.AbstractChannel.receive(AbstractChannel.java:39)
at org.codehaus.xfire.transport.http.XFireServletController.invoke(XFireServletController.java:287)
at org.codehaus.xfire.transport.http.XFireServletController.doService(XFireServletController.java:130)
at org.codehaus.xfire.transport.http.XFireServlet.doPost(XFireServlet.java:117)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at com.opensymphony.webwork.dispatcher.FilterDispatcher.doFilter(FilterDispatcher.java:189)
at com.jivesoftware.base.action.util.JiveFilterDispatcher.doFilter(JiveFilterDispatcher.java:69)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at com.jivesoftware.base.util.webwork.JiveActionContextCleanUp.doFilter(JiveActionContextCleanUp.java:38)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Log of the server that hosts the app:
[2010-09-05T23:21:08.184-07:00] [AdminServer] [WARNING] [] [oracle.adf.controller.internal.metadata.MetadataService] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000If_h8YC5e_Vau1q2UH1CWBIO0001Nc,0] [APP: StoreFrontModule#V2.0] [dcid: bafcaeab2cd82008:3873773a:12ad6c38b8a:-8000-0000000000001665] ADFc: /WEB-INF/adfc-config.xml:
[2010-09-05T23:21:08.185-07:00] [AdminServer] [WARNING] [ADFC-52024] [oracle.adf.controller.internal.metadata.MetadataService] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000If_h8YC5e_Vau1q2UH1CWBIO0001Nc,0] [APP: StoreFrontModule#V2.0] [dcid: bafcaeab2cd82008:3873773a:12ad6c38b8a:-8000-0000000000001665] [arg: shoppingCartBean] ADFc: Duplicate managed bean definition for 'shoppingCartBean' detected.
[2010-09-05T23:21:08.190-07:00] [AdminServer] [ERROR] [] [org.apache.myfaces.trinidadinternal.application.StateManagerImpl] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000If_h8YC5e_Vau1q2UH1CWBIO0001Nc,0] [APP: StoreFrontModule#V2.0] [dcid: bafcaeab2cd82008:3873773a:12ad6c38b8a:-8000-0000000000001665] Could not find saved view state for token uutg3hslp
[2010-09-05T23:21:11.851-07:00] [AdminServer] [WARNING] [] [oracle.adfinternal.view.faces.renderkit.rich.NavigationPaneRenderer] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: anonymous] [ecid: 0000If_h9SE5e_Vau1q2UH1CWBIO0001Ni,0] [APP: StoreFrontModule#V2.0] [dcid: bafcaeab2cd82008:3873773a:12ad6c38b8a:-8000-000000000000166f] Warning: There are no items to render for this level
[2010-09-05T23:21:22.821-07:00] [AdminServer] [WARNING] [WCS-04013] [oracle.webcenter.collab.forum.internal.view.backing] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: pbrown] [ecid: 0000If_hC765e_Vau1q2UH1CWBIO0001Nm,0] [APP: StoreFrontModule#V2.0] [dcid: bafcaeab2cd82008:3873773a:12ad6c38b8a:-8000-0000000000001673] [arg: pbrown] [arg: Authentication Failed] failure to authenticate the user pbrown, due to: Authentication Failed[[
oracle.webcenter.collab.share.LoginFailedException: failure to authenticate the user pbrown, due to: Authentication Failed
at oracle.webcenter.collab.forum.internal.jive.JiveAuthenticator.handleException(JiveAuthenticator.java:304)
at oracle.webcenter.collab.forum.internal.jive.JiveAuthenticator.login(JiveAuthenticator.java:247)
at oracle.webcenter.collab.forum.internal.jive.JiveForumSession.login(JiveForumSession.java:128)
at oracle.webcenter.collab.share.Session$1.call(Session.java:353)
at oracle.webcenter.collab.share.Session$1.call(Session.java:347)
at oracle.webcenter.concurrent.Submission$2.run(Submission.java:406)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.webcenter.concurrent.Submission.runAsPrivileged(Submission.java:420)
at oracle.webcenter.concurrent.Submission.run(Submission.java:347)
at oracle.webcenter.concurrent.Submission$SubmissionFutureTask.run(Submission.java:737)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:442)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:139)
at oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$Worker.runTask(ModifiedThreadPoolExecutor.java:657)
at oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$Worker.run(ModifiedThreadPoolExecutor.java:683)
at java.lang.Thread.run(Thread.java:619)
Caused by: Authentication Failed
Thanks,
Todd

I have same problem here. used weblogic admin but still doesnt works. Thats amazing or not?
oracle.webcenter.collab.share.LoginFailedException: failure to authenticate the user Weblogic, due to: Authentication Failed
Edited by: José Carlos on 06/09/2010 06:56

Officejet A909a prints from mac but when from windows "out of paper" message appears.

I have an older 8500 which has been very loyal to me and I have looking after it well, which is now pushing 4000 pages. However i went to print a file from my Windows 7 PC yesterday which is connected via usb, and it wouldnt print saying it was out of paper (which it wasn't) about half full . So i tried again no luck. UN-installed then reinstalled the printer still noting. went to my work laptop (windows 7) which is connected wirelessly through the network, same again "no paper" message appears. i thought this is strange turned it off back on still nothing even after disconnecting it from the mains for a few minutes, nothing the same message still appears.
However, my son has a mac book pro and he just printed his coursework off the printer effortlessly through my network. so i know the printer is fine especially as i have now printed self test pages off through the printer itself.
I have no idea what to do now, as i have tried uninstalling then installing, printing via usb and network. and when i say "out of paper" i mean the printer receives the print command from my computer as it tries to feed paper a few times but cant pick it up also i have tried with various paper levels in the printer (full, half, about 20 pages, 1 single page)
Please help.

Hello @Dangerous97,
I understand that when printing from your 2 Windows 7 computers you receive an 'out of paper' message after your HP Officejet Pro 8500 All-in-One Printer struggles and fails to pick up paper. However, you are able to print from a Mac computer. This is very unusual behaviour! I would like to assist you today with resolving this issue. Also, thank you for including that you are able to print self-test pages from the printer with no issues as well.
Generally, 'out of paper' messages are caused by a hardware issue with the printer itself. Because you are able to print standalone to your printer and from a Mac, there may be an issue with the documents that you're trying to print from your Windows 7 computer or a programming issue with your printer.
With that being said, to start I would like you to click here to download and install the latest programming Firmware Update on your printer. Once the website opens select the Download button on the top left. Once the download is complete, please follow any onscreen instructions to send the update to your printer.
Once the Firmware has been successfully updated, please test printing again.
Please respond to this post with the result of the Firmware Update. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Print to Windows Shared Printer from Mac on wireless network

My set up is: HP Deskjet 1050 410 USB to a WIndows 7 PC. The PC has 4 users, each password protected for login and public (not protected) folders. The Macbook is running OS X 10/6/8. I have downloaded the latest HP drivers.
I found the printer on the workgroup network and installed it as the only printer on the Macbook. When I send a job to print, I am prompted to either login as a guest or as a user with a password. Either way, I get an eror message "On Hold (Authentication required)" Under Job Info is the following message "NT_STATUS_INVALID_PARAMETER"
THis is an improvement over what was happening before when I could not find the printer in the list and had to manually use the IP address. Even then, I could not print, I would get a communication error.
The first time I installed the printer driver (an earlier driver and earlier release of OS X 10.6) I had no problems printing from the Macbook. It found the printer and printed without any password authentication. Nothing has changed on the PC, the printer is shared with all users on the network, but I can't seem to print.
I noticed many postings with similar issues but I did not see any resolution. Help! (Thanks!)

hey just want to say thanks to you guys... I just this week switched to Mac after 14 years of heavy PC use. Mac's been awesome except for that I couldn't print to my PC based printer... now I can... and I couldn't of done it with out this apple discussion thread about HPIJS.

Can't print to windows Vista printer from Mac OS 10.6.7

Hi All,
Proud new owner of iMac 27" and have successfully managed to set up file sharing between my new Mac and current Windows Vista machine. Windows is attached to a Belkin 54g wireless router. A Canon MP960 is attached to the Windows machine via USB. The Mac is working with the network via Airport.
Problem is that I can't see the printer from the Mac. I have tried manually setting up the printer to be shared with the Mac via:
Mac OS X v10.5 or later
Choose System Preferences from the Apple menu.
Choose Print & Fax from the View menu.
Click the + button to add a printer.
Press the Control key while clicking the "Default" icon (or any other icon on the toolbar), then choose Customize Toolbar from the contextual menu that appears.
Drag the Advanced (gear) icon to the toolbar.
Click Done.
Click the Advanced icon that was added to the toolbar.
Choose Windows from the Type pop-up menu.
In the URL field, type the printer's address in one of the following formats:
smb://workgroup/server/sharename
smb://server/sharename
Note: "workgroup" is the name of the Windows workgroup that the computer sharing the printer belongs to. "server" is the name of the computer sharing the printer (or its IP address). "sharename" is the shared Windows printer's share name. If the share name contains spaces, replace each space with "%20" (without quotation marks).
Tip: You don't need a "workgroup" when specifying the IP address of the computer (such as when the printer is on a different subnet), or if your Mac belongs to the same Windows (SMB) workgroup.
In the Name field, type the name you would like to use for this printer in Mac OS X.
Choose the appropriate PPD or printer driver from the "Print Using" pop-up menu.
Click Add
I have also allowed printer sharing on the windows machine. I still can't print!
Can anyone please help? Are there some settings I could have missed?

I have the same setup but with a Canon MX850. This did not fix my problem.

Windows Authentication Fails

We are running ACS 4.1.(4) Build 13 on a member server within a 2003 AD Domain.
We get the following errors in the CSAuth.log file:
AUTH 05/03/2008 17:21:15 E 0384 6180 0x24 External DB [NTAuthenDLL.dll]: NetUserGetLocalGroups failed with result [5]
AUTH 05/03/2008 17:21:15 E 2169 6180 0x24 External DB [NTAuthenDLL.dll]: nt_GetUsersNTGroups failed
AUTH 05/03/2008 17:21:15 E 0384 6180 0x24 External DB [NTAuthenDLL.dll]: NetUserGetLocalGroups failed with result [5]
AUTH 05/03/2008 17:21:15 E 2169 6180 0x24 External DB [NTAuthenDLL.dll]: nt_GetUsersNTGroups failed.
It appears that ACS cannot determine group membership of the AD account. I have setup the mappings of AD Groups to ACS Groups.
Any ideas?

Ensure that you have followed *all* the steps mentioned in this link,
Configuring for Member Server Authentication:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/installation/guide/windows/postin.html#wp1041304
Also, install Patch 6 for ACS version 4.1(4) Build 13 from,
http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des
- Acs-4.1.4.13.6-SW.zip
- Acs-4.1.4.13.6-SW-Readme.txt
Regards,
Prem

Which is best remote software to access Windows 2008 Server from Mac Air

Hi
Is anyone using, succesfully, remote software to log into a Windows Server 2008 network from a Mac. I use Wyse Pocket Cloud Pro on my iPhone but there doesn't seem to be an app for a Mac Air. Any suggestions or help appreciated?

Ummm... Microsoft's own RDC for Mac
http://www.microsoft.com/mac/remote-desktop-client

Export Windows native installer from MAC

Hello,
I am developing an desktop app that needs to be compiled into Native installer (because i'm using NativeProcess class).
The fact is that i am working on FB4.7 OSX and i'm only able to compile the Mac version of my app (into .dmg file), and not the windows one...
Is there a way to build that Win version from my mac ?
(it would be a shame not to be able to export both versions, or my conception of AIR is wrong...) ?
Thanks,
Arthy

After you downloaded the Windows Media Player, did you use the Stuffit expander to unpack the file? If not, go here http://www.allume.com/mac/index.html and download the free version of Stuffit. Once you have expanded the file you will see the install file for the Windows Media Player, click on that and it should install properly.
The player is compatible with Tiger.

Emails vanish from .mac account when deleting them from iphone!

The problem we are having is that on my wifes minimac when she deletes emails on her iphone they vanish from her desktop .mac mail programme.. not good!
But.... my email on my G5 .mac mail programme account is set to .Mac IMAP and my emails that come into my iphone dont get deleted from my desktop .mac mail programme.
How can i set up her account to not delete the mails from her minimac mail account?
Her email is an additional account - whereas my account is the master account!
can anyone help?

If you are accessing the account as an IMAP account with the email client on your computer as well as with the iPhone's email client, all server stored mailboxes are kept synchronized automatically between the email clients used to access the account. This cannot be changed. If you delete a message from the account's Inbox mailbox with the iPhone's email client, the message will no longer be available in the account's Inbox mailbox when checking the account with your computer's email client and vice-versa.
This is the nature of an IMAP account which cannot be changed.
If this is not the same for your account, this indicates you are accessing the account as a POP account with one or both email clients used to access the account.

MFA (Certificate) Authentication Failing from Extranet

Hi, we have set up ADFS3 and WAP. ADFS3 configured to require MFA (Certificate) from both Intranet and Extranet. We are using our own CA and the root CA is installed on the WAP in Trusted Root CA store. The certificate port of 49443 is open from the Internet
and also inward from the WAP to the ADFS3 server, as is 443.
When we test we can use MFA from the Intranet, but when we try the same from the Internet (Extranet) we get the Forms Logon page okay, enter our user details, select our user cert, and then we get a 403 error - The Website declined to show the web page.
The CRL is resolvable from the Internet, and can be reached okay...
Is there something we have missed please?
Thank you for any help.
Phil

Hi Steve,
Yes, I have restarted both ADFS and WAP Servers.
As a further update, I have even purchased an SSL cert from Comodo to check it this is a Public\Private CA issue, and I still get the same 403 error... I have even tried configuring the backend Web Site (SharePoint in this case) to allow Anonymous authentication,
just to see if I could get to the site via the WAP, but I still get the same 403 error... Its strange because the URL is still pointing to the Web Address of the ADFS server when I get the 403... Its difficult to see as there arent any IIS logs either now...
Thanks
Phil

How do I stop extra windows or programs from opening automatically when I access my Applications folder via Finder?

Each time I access my Applications folder via Finder, a bunch of ejectable windows or previously downloaded programs open up on the desktop. I have ejected each one or placed it in the trash, but it still happens. How do I stop this from happening?

I asked the same question on Yahoo! Answers, and I was advised to reinstall Firefox, which I have just done (with version 3.6.8). The problem seems to be solved. Prior to doing this, I attempted to uninstall my previous version, but Control Panel wouldn't let me do this, nor would Windows Explorer allow me to send the whole Mozilla Firefox folder to the Recycle Bin. I went to Plan C, which was to delete all the subfolders in the main folder, followed by the leftover files, and finally empty the Recycle bin. Then I used Internet Explorer to download the newer version of Firefox, and installed it. No more extra home pages, so far.

Windows authentication fails from Mac browser when LB is in between

Similar Messages

Maybe you are looking for