Windows device driver for third party io cards

hi
 now i am working with i/o cards ,in our lab we are having our own designed i/o cards ,,so when we are inserting to the pci slots and turn on the system its asking some device driver .....?ok ,,now i want to access the i/o cards using labveiw. i want to install the device driver ,or other wise can i able to talk directly with the  i/o cards ,
 thanks in advance
Indrajit
| [email protected] | [email protected] .

Hi jith,
Do you already have a driver developed for this PCI board?  You can access .dll's and call their functions from LabVIEW if you already have a .dll for this board developed.  Otherwise, I would recommend using the VISA Driver Development Wizard.  Hope this helps!
Regards,
Anna M.
National Instruments

Similar Messages

  • How to develop 64-bit Windows device driver for NI-6602?

    Due to the fact that NI-VISA doesn’t support 64 bit Windows, how can I do to develop a 64 bit Windows device driver for NI 6602 (Counter/timer) PCI card. The possible jobs include:
    Develop a Windows Kernel Mode Driver (“Device Driver”);
    Make it to comply with VISA in order to utilize “osiBus Generic IO Interface” and MH DDK.
    Could anyone please give me some advices as soon as possible?
    William Liao
    Message Edited by Wiliao on 07-22-2005 04:12 PM

    Hi All,
    I am currently working on getting the health parameters
    from the motherboard like voltage fan and temperature. I have already
    already done this using 32 bit winio driver but i am not able to work
    on 64 bit version. is there any driver availbale in 64 bit for
    obtaining this parametes or some one help me to get a 64 bit winio
    driver.
    Regards,
    Senthil prabu R

  • How to get the Windows Vista Driver for ATI Radeon 7500 card?

    How to get the Windows Vista Driver for ATI Radeon 7500 card?
    I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
    Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
    Thank you.
    regards,
    W. Thong

    wthong wrote:
    How to get the Windows Vista Driver for ATI Radeon 7500 card?
    The Radeon 9000 driver works for the Radeon 7500 card.  I have successfully used it on a T43 with Vista Ultimate x86
    wthong wrote:
    Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
    Unfortunately no.  The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
    Cheers,
    Bill
    I don't work for Lenovo

  • Windows 7 driver for GeForce 320m Graphic Card and Broadcom wireless card

    I just got my 11" MacAir (2011)and installed Windows 7 on it using Parallel software. Everything works fine except for the driver for the Broadcom BCM 43xx1.0 airport wireless card and for the GeForce 320m graphic card. Windows 7 cannot find the drivers. I have tried everything to find a solution: Downloaded the drivers from the Broadcom and NVIDIA websites, used the drivers that came with bootcamp and made changes to the nvao.inf file for the graphic card problems but nothing works. Does anyone know a solution to these problems? Many thanks.

    Hi,
    since Parallels is not an Apple product it would be better to use their own Support resources.
    However, Parallels does not use the native (real) hardware of your Mac but virtualizes certain hardware.
    The video adapter is a "VGA and SVGA with VESA 3.0 compatible Video Adapter" and the WiFi is mapped to a "Ethernet Virtual network card compatible with RTL8029".
    For these virtual devices Parallels brings all drivers with it and names them "Parallels Tools" which you have to install manually while in our Parallels Windows virtual machine.
    Refer to the Parallels User Guide http://download.parallels.com/desktop/v6/docs/en/ParallelsDesktop_UsersGuide/
    Regards
    Stefan

  • Recommendation for third party wireless card

    I have a client with a dual-core G5. They didn't purchase it with Airport but now they want wireless access.
    Unfortunately it looks like you can't install a Extreme card after the fact as you could with the previous PowerMacs. They would have to bring the Mac into an authorized service center to have them install it.
    Does anyone know of a PCI based solution? Am I going to have a problem since it uses PCI-express?
    Thanks,
    Mitch
    Dual-Core PowerMac G5   Mac OS X (10.4.3)  

    The link pulls up a 404 page...drats. When going through the front door on Virgin site, I found their Broadband2Go, but it’s not Mac compatible. Only PC (drats again).
    Like the OP, I’d love to find a “pay as you go” broadband solution for the MBP. I travel quite a bit for work, and most of the time can wrap the hotel’s internet charge into the client contract. Still, there are times the trips are on my dime, so it would be great to have a PAYG solution.

  • No driver for Airport Exteme WLAN card working in Windows Vista (32bit)

    Hello,
    Fairly recently I had an Airport Extreme card installed into my Mac Pro. Of course everything works on the Mac side and the card appears with the following info:
    Wireless Card Type: AirPort Extreme (0x14E4, 0x8E)
    Wireless Card Locale: USA
    Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (5.10.38.35)
    Current Wireless Network: XXX
    Wireless Channel: 1
    Under Windows Vista Ultimate (32bit) the card comes up with the following hardware ids:
    PCI\VEN14E4&DEV_432B&SUBSYS_008E106B&REV01
    PCI\VEN14E4&DEV_432B&SUBSYS008E106B
    PCI\VEN14E4&DEV_432B&CC028000
    PCI\VEN14E4&DEV_432B&CC0280
    The Leopard DVD does not seem to contain any compatible drivers for Windows using Bootcamp for this card. I am really struggling to find a driver that works. The card is listed as 43XX in OS X, and by the Windows hardware ids it seems to be a 432B? I've tried third party drivers for this Broadcom chipset range and nothing will work and even detect a compatible card installed.
    Surely there is a working Windows Vista driver for this Broadcom chipset? Does anyone have any suggestions?
    Thanks!

    thanks for replying..... I'm using the latest driver from the site X.0004 for the x-fi xtremegamer fatality pro. The Sound card is detected just fine. The card shows up correctly, but its just that there are no sound coming out from any of the line out. If I play an mp3 or a movie, I can see that the bar is moving under "Sound" in control panel. I've tested it using headphones etc. The card itself is fine because I tested it on windows xp, well the store where I bought it from did. So its not a hardware problem.

  • Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

    I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver  I have the message that it is already up to date.
    I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?

    Hi juigarashi,
    Microsofts automated troubleshooting service on the link below may help
    CD/DVD Repair
    Hope it works for you.
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Alarms for Third party devices on Cisco PI v 2.1

    Is it possible to receive alarms for third party devices in Cisco Prime Infrastructure 2.1? If so how do i configure PI to show the alarms?

    Hi,
    AFAIk, It is not possible to receive alarms for third party devices in Cisco Prime Infrastructure 2.1.
    we have very limited support of 3rd party devices in PI. third party devices only snmp polling, snmp traps and syslog will work
    Third-party support   
     ●  Ability to discover and monitor third-party (non-Cisco) switches that support RFC 1213 and wireless controllers/access points from Aruba Networks
    Thanks-
    Afroz
    ****Ratings Encourages Contributors ****

  • Equium - Windows can't load the device driver for USB dongle

    I have been using a dongle without problems for about a month, however now it is saying (in device manager ) "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
    what does this mean and how can i fix it?

    hi it's a vodafone 3gb cheap as chips dongle
    it's an equium a200 i think
    everything cam as one on the dongle, it uninstalled ok after initial problem, but now won't acknowledge it is in fact a dongle, just a 'usb mass filter' something or other?
    i know i sound completely stupid, but when it comes to technology i am!

  • Iphone bluetooth device driver for windows 7 os

    My laptop says it cannot connect via bluetooth because it doesn't have the the device driver for my windows 7 os - can someone point me to it as I am having difficulty finding it - thanks

    what are you trying to do?
    the only thing windows can use an iphone for bluetoothwise is
    teething it's internet connection (it being the iphone)

  • Firewire device driver for Windows XP

    I have connected my Mac and my Windows XP computers together using Firewire.
    The Windows XP computer reports it found a new device.
    However, Windows XP needs a device driver to be able to communicate with the Mac.
    Is there any device driver for the Windows XP computer that would allow it to see the Mac over the Firewire port?

    PCs do not support firewire target disk mode, so you will not be able use your Mac as hard drive on your PC. Your only option is to create a small network using TCP over firewire...which XP supports but Vista does not.

  • Where do I locate a device driver for my new Ipod  so I can upload to it for my windows 7 pctouch

    Where can I locate a device driver for my Ipod touch.  My PC doesn't recognize it.

    Try the troubleshooting steps in this support article:
    http://support.apple.com/kb/TS1538
    Hope it helps.
    Regards.

  • I use labview 8.0 and i can not run daqmx driver for pcmcia 6062e daq card

    i use labview 8.0 on window xp .when i installed a PCMCIA daq card 6062E, i could not run daqmx driver.It is fine to see that the traditional version is working well.When i install daq card sometimes it is working well with traditional driver  but mostly i see error on reading an analog input from PCMCIA daq device.An error called 'base adress' occures .I use last version of driver that is daqmx 8.0.1. and i have installed this correctly but again i could not  see any signal on the test panel for daq-mx driver.I don't know what is the problem.Also when i install PCMCIA daq card Please reply this message.I need your helps.
    Thanks

    Hello,
    Thanks for your reply.I will try to answer your questions.
    I have checked the Device Mananger and I have seen that the device is detected by Windows  XP.  For another question the card shows up under both NI-DAQmx Devices and Traditional NI-DAQ (Legacy) Devices consistently in the Measurement & Automation Explorer.I use a way that I reset the driver for traditional NI-DAQ in MAX,and then i reset the device for NI-DAQmx driver in MAX and again i tried to run the test panel of DAQmx driver but again i saw a wrong signal or noise signal on the test panel i could not see the sinusoidal signal that i connected. i do get the test panels to run with the card using the DAQmx driver,  But could not run the DAQ diagnostic utility.The error was as i specified below.
    03.05.2006 09:49:35
    Results saved to:  C:\Documents and Settings\serkan\Desktop\Diagnostic Results.txt
    Selected Device: Dev1
    Device Type: DAQCard-6062E
    Serial Number: 107509E
    Device Support: (PASS)
    NI-DAQmx Version: 8.0 (PASS)
    Device Reset: (FAIL)
    Error -50002 occurred at an unidentified location
    Possible reason(s):
    The specified device is not a valid device. The operation could not be completed as specified.
     ------ DIAGNOSTIC UTILITY ABORTED -----
    And for your last question i can say that i have used the DAQ card on other laptops.But the results were the same.İ hope to see your reply
    Thanks,
    Serkan Buhan
    Electrical-Elecronics Engineer
    Researcher
    TUBITAK-BILTEN

  • Third party Wireless Card on a Power Mac G5, bipro 1.8 GHz

    Does anyone has a definite answer whether or not a TrendNet 403 PI+ PCI card would work or not along with my G5 bipro 1.8 Ghz (beginning 05- OS 10.3.9) ?
    I have the same card installed on my B&W, which is recognized as an airport extreme card.
    Installed into the G5, it is recognized by the hardware :
    System Profiler says on Airport Card "Wireless Card Type : Third Party Wireless Card", but "Current Wireless Network : wireless network not available"
    I have the 5 bars on airport icon, but they are grey
    When I go to Other network and give the name of my network, it keep saying : "There was an error joining the Airport network".
    Any clue why it works into my W&B (G4- 400 Mhz) and not into the G5 ?
    Thank's for any advice
    Luc

    See Luc's new thread "AirPort Extreme Driver Update did not solve my problem".

  • Third party RAID card. . .

    Greetings. 3 questions (with by-questions added).
    1. I have "read" that you can't use third-party RAID cards with apple HDD or Apple RAID with third-party HDD because of formatting from Apple. Is this true?
    a) I've also "read" that there aren't any third-party RAID cards available for the "new" 2009> Mac Pros. Is this true
    b) If question 'a' is false and it IS possible to install or "adapt" a third-party RAID card to the Pro, how would one go about it?
    2. If I kept the OS running off of the 640GB HDD from apple, would I have to also add ONLY apple HDD?
    3. Is it true that software RAID can only do RAID0 and 1? I'm planning on adding 2x 500GB drives for my video editing needs, which should be plenty to start out with; the answer to the question will help allow me to plan for when I should start saving for a RAID card.
    Of course, I plan on playing and exploring the "RAID world" before actually working with it, but these questions still needed answering.
    Thanks. Links are welcome if they help me understand your answers to my questions!

    If you only want a Video editing striped RAID pair and a System drive:
    a) You do not need the frighteningly expensive RAID card with its 72-hour backup battery.
    b) Apple software RAID (built into Disk Utility) is perfectly adequate for most uses. There is other software you can buy, and it also works just fine.
    c) You can use whatever SATA drives please you, but "Green" drives are for economy, not performance.
    d) You do not need to keep that 640GB as your System Drive. You can replace it with a smaller drive and use the 640GB as half the RAID, if you wish.

Maybe you are looking for