Windows Server 2012 R2 eval refuses to install

I have downloaded Windows Server 2012 R2 evaluation ISO twice. I have tried installing it in VMWare Workstation 10, in VirtualBox 4.3.12 as well as on a Core2Duo E4200 test box w 4GB RAM. All 3 of these methods fail to install. They all result with the same
error:
There are no MD5Sums posted on the Eval page but both download attempts generate the same checksums:
File: 9600.17050.WINBLUE_REFRESH.140317-1640_X64FRE_SERVER_EVAL_EN-US-IR3_SSS_X64FREE_EN-US_DV9.ISO
CRC-32: 3221785b
MD4: 2abe3e1c6dfdcd8f6bdaa779baf011e3
MD5: b391a267949518ed6bb69f908f252076
SHA-1: 5e2ddcaecc91e80a8ce3ec7ae7838f8a3967ed7f
I am stumped. Can anyone at MS or those who were able to install this ISO properly can you verify these checksums? I have tried installing it on the Core2Duo box via USB key and DVD with same result.

That page is a link to the Datacenter version of Server 2012 R2 and the one I am attempting to install numerous times is the non data center version. Anyways I selected Datacenter ISO version, registered and then proceeded to the next page where I seen the
following error:
The webpage at http://care.dlservice.microsoft.com/dl/download/6/2/A/62A76ABB-9990-4EFC-A4FE-C7D698DAEB96/9600.17050.WINBLUE_REFRESH.140317-1640_X64FRE_SERVER_EVAL_EN-US-IR3_SSS_X64FREE_EN-US_DV9.I might
be temporarily down or it may have moved permanently to a new web address.
Can anyone who has successfully installed Server 2012 R2 (non DataCenter) version from ISO on to a temp system generate
a check sum of the ISO file?
I am going around in a circle here after attempting to install it on 2 systems as a standalone install and on two additional
systems in VirtualBox and VMWare Workstation on one system and VirtualBox on a second system all of which resulted in the all too familiar error.

Similar Messages

Upgrading Windows Server 2012 Essential Eval to Windows Server 2012 R2 Retail

I need to upgrade from Windows Server 2012 Essential Eval version to Windows Server 2012 R2 Retail. What would be the easiest way to upgrade if license $$ is not an issue? The Server is a DC. Would the following works:
1. Upgrade from Windows Server 2012 Essential Eval to Windows Server 2012 Essential Retail
2. Do a conversion from Windows Server 2012 Essential Retail to Windows Server 2012 Standard Retail (I suppose this just require several command line to enable the 2012 Standard)
3. Do an in-place upgrade from Windows Server 2012 Standard to Windows Server 2012 R2 Standard (there is no need to do migration, am I right?)
Thanks.

I just did a simulation using Hyper V. It seems that I'm able to do the upgrade sequence as described but I'm not sure whether there are any side effect that not yet surface out. Here is the details steps that I took:
1. Under Windows Server 2012 Essential Eval
convert the Windows Server Essential 2012 Eval to Windows Server Standard 2012 using the following command in an elevated command prompot
dism /online /set-edition:ServerStandard /productkey:xxxxx-xxxxx-xxxxx-xxxxx-xxxxx /accepteula
press "y" and return to restart as prompted
the productkey could be retail key or the KMS client keys (just for installation not for activiation)
2. After reboot, the system become Windows Server 2012 Standard
using admin account to login
add admin account to the Enterprise Admins group and Schema Admins group if not already done so, logout and login again
mount the Windows Server 2012 R2 Standard disk in, say, drive d:
in an elevated command prompt, go the following:
cd d:\support\adprep
.\adprep.exe /forestprep
.\adprep.exe /domainprep
double click on d: in explore to run the Windows Server 2012 R2 Standard setup
follow the instruction to complete the in-place upgrade from Windos Server 2012 to Windows Server 2012 R2
3. After reboot into Windows Server 2012 R2 Standard, go to the charms bar, select setting -> server info, it will mention the server is not activated, click on Activate Windows and key in the Windows Server 2012 R2 Standard retail key

Upgrade a Domain Controller running Windows Server 2012 Datacenter Eval

Hello,
because I couldn't wait for Server 2012 to show up on Dreamspark Premium I installed the Datacenter evaluation version after I found this blog
post telling me, I could simply enter my key when I get it to upgrade to the full version.
After entering the command I get notified that "Changing this Windows edition is not supported online for a domain controller.".
The TechNet article for upgrading evaluation versions states the following:
"If the server is a domain controller, see http://technet.microsoft.com/library/hh472160.aspx for important steps to follow before proceeding."
and taking me to an article for installing/uninstalling ADDS without further comments.
Simply typing "slui 3" and entering my key states that I have to enter an eval key.
My question is: Is there a painless way to upgrade my 2012 DC without losing my AD config?
Regards,
Hans

Hi,
Please refer to the following Microsoft TechNet article to confirm if the steps of converting to full retail version are correct.
Evaluation Versions and Upgrade Options for Windows Server 2012
http://technet.microsoft.com/en-us/library/jj574204.aspx
If the warning persists, it means Windows Server 2012 Domain Controller does not support such convert. If so, please install another Windows Server 2012 full retail version or
convert to full retail version and then promote it to an additional Domain Controller for this domain. After that, transfer FSMOs to this new Domain Controller and demote the original Domain Controller.
Regards,
Arthur Li
TechNet Community Support

Windows Server 2012 R2 (VM). KB3000850 installed successfully but then after reboot it couldn't complete update & uninstalls

Hi,
Every time we try to install KB3000850 on a Windows Server 2012 R2 (Virtual), it says it installs successfully, reboots, but then before the logon screen comes up it says "We couldn't complete the updates, undoing changes..." and it uninstalls
the update. Yet, when you look at installed updates, it shows KB3000850 yet it's still availabe when you look for new updates, and if you run the update again manually, it doesn't say that it's already installed. What gives? :)
(no hyper-v)
Thank you!

Hi,
Please refer to Dave’s suggestion and check if help you to solve this issue.
Just addition, please also refer to following KB and check if can help you.
"Failure configuring Windows updates. Reverting changes.
Do not turn off your computer" error when you try to install Windows updates
Meanwhile, please check Windowsupdate and CBS log files if fine more relevant clues.
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Fresh install of Exchange Server 2013 on Windows Server 2012 R2 Blank screen after install

Attempting to log in to the OWA I get a white screen immediately after entering credentials
When I open the Exchange Management Shell I get the error
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
Along with the above error it also says Access is denied
Im running the Exchange shell as admin
There were no errors during the install and I did everything according to the Exchange Server Deployment Assistant
At first when I attempted to log in it would say my credentials were incorrect
This is part of a active directory set up and I fulfilled all of the active directory piece.

Hi,
According your post, I understand that open EMS with error “AccessDenied,PSSessionOpenFailed” after fresh install Exchange 2013.
If I misunderstand your concern, please do not hesitate to let me know.
Please follow below steps for troubleshooting:
1. Reboot the server, usually fixes this error.
2. Make sure your authentication settings on your virtual directory for PowerShell is correct.
Internet Information Services (IIS) Manager, <Servername>, Sites, Default Web Site, PowerShell and in the right panel, scroll down to the Authentication module, then make sure that Anonymous access is disabled and Windows Authentication is
enabled.
3. Double check the configuration of HTTP binding on Default Web Site in Internet Information Services (IIS).
4. Run Get-User Identity | FL *power* to check whether the current logged in user has remote powershell enabled.
If the issue persists, please try to remove the PowerShell virtual directory and renew for testing.
Additional, I find an similar thread about your question, for your reference:
https://social.technet.microsoft.com/Forums/windows/en-US/29b3284a-36e1-43b0-87b8-63ee4500f265/exchange-2013-ems-throwing-access-denied-error-and-toolbox-giving-mmc-error?forum=exchangesvradmin
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

CF11 install problem on WIndows server 2012 R2

We have a new install windows server 2012 R2 with a new install CF11 standard installed on C drive. Everything is 64bit. The CF administrator site and login works fine. cfm files will not serve up in the default directory, but IIS shows htm files fine. CF administrator runs fine.
Web Server Config tool will only show "None" in the IIS Web Site box. The usual CGI, APS, etc have been installed on IIS. In fact IIS and CF11 have been reinstalled. wsconfig.exe manual run shows no errors.
The problem is that any call to a cfm template results in an error (html pages serve fine):
HTTP Error 500.0 - Internal Server Error
The page cannot be displayed because an internal server error has occurred.
Detailed Error Information:
Module       IsapiModule
Notification       ExecuteRequestHandler
Handler       cfmHandler
Error Code       0x8007007f
Requested URL       http://localhost:80/default.cfm
Physical Path       C:\inetpub\wwwroot\default.cfm
Can anybody give any suggestions for troubleshooting? No logs seem to show any information that helps.

Fixed the problem......... it is not a CF problem alone but and mostly an IIS problem ....
1) remove IIS completely...... including the inetpub directory..... remove .NET Extensibility from server manager under Application Development if inetpub in use error is present... inetpub has to be deleted.
2) reboot
3) reinstall IIS and enable all the usual stuff, ie, CGI, ISAPI, .NET, ASP , WebSocket Protocol, etc under Application Development
4) restart IIS and CF
5) Set Web Server Config to "All"
60 restart IIS and CF
The trick to completely reinstall IIS and that is only done if you can delete the inetpub folder under root drive.

Network Connection error when Trying to Install Windows Server 2012 R2 Essentials

Thank you to anyone who can help me out here. I have a brand new machine with known working wifi and wired ethernet adapters (works under Windows 8.1) I am attempting to install Windows Server 2012 Essentials R2. During the install process, the system connects
to the internet to download updates to help along the install. No problem here. Further down the road after restarting several times and now during the "Configuring Windows Server Essentials" step of the install, I am told "There is no network
connection. Please fix the connection issue and try again."
When troubleshooting the connection, I am told that the wifi adapter drivers may not be installed. I have a wireless card in the machine and have also tried disabling the wifi adapter and have been connected successfully via the ethernet port this whole
time.
Help, I'm stuck and have been to this point in the install 4-5 times already.
Thank you.

Is this a laptop? Can you remove the wifi? Disable it in BIOS?
Does the wifi have an IP and internet when it throws the error?
BTW, when the wizard ask about updates say no. Takes way too long and does not help anything
Change the binding order and put the wired on top.
The Steps?
Just open your Network and Sharing Center. (Change adapter settings)
Press an ALTkey on your keyboard to show the menu bar.
Click on the Advancedmenu
choose Advanced Settings option
Adjust your binding order for your NICs to ensure your wired ones are at the TOP
http://regularitguy.com/2012/12/06/how-to-change-nic-binding-order-in-windows-8-and-windows-server-2012/
Grey

How to install RDP CALs pack on Windows Server 2012 R2 (member of NT domain)

OS: Windows Server 2012R2 (64-bit), member of NT (Samba 3) domain.
Task: install RDP CAL pack, to allow connecting above its default 3 sessions limit.
Problem: when setting up RDP licensing/other required service, I came to a problem: RDP access broker service requires AD type of domain to be installed.
The server is part of NT (Samba 3) domain and we have no intention to change domain type only to satisfy an auxiliary service.
Is it possible to enable additional RDP CALs on Windows Server 2012 R2 without mandatory joining an AD? The license control available up to Windows Server 2008 has been removed from Windows Server 2012, I can't bypass installing broker and the rest of related
services.
Thank you for any information.

Hi,
you might find the dedicated TS/RDS forum is better suited to your question:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverTS
Some related information which may be helpful:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/cbffb2d4-ff9d-49ee-a9ce-a60db2262422/managing-server-2012-rds-in-a-workgroup?forum=winserverTS
http://support.microsoft.com/kb/2833839/en-au
http://ryanmangansitblog.com/2013/10/30/deploying-a-rdsh-server-in-a-workgroup-rds-2012-r2/
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Installing driver on windows server 2012 R2 in VAIO-VPCEH38FN model

Hi,
Q1. I'm using Windows server 2012 R2. How can I install ethernet driver,Wifi Driver, Bluetooth driver etc in my VAIO laptop. can i install or not?
Q2. can i install one Windows 7 and another Windows server OS in same drive?
Please reply soon.. Thank you!
Rajnikant

Hi Rajnikant,
>>>Question1
As Dave have mentioned above, we may need to consult with the manufacturer of the laptop.
>>>Question2
If you want to create a multi-boot system, please refer to the link below,
http://technet.microsoft.com/en-us/library/ee829686(v=WS.10).aspx
Best Regards.
Steven Lee
TechNet Community Support

SCORM (flash Player Content) not working on Windows Server 2012 R2 which has IE11 integrated installed on it.

Hi Everyone,
I have website which contains SCORM package, installed on Windows Server 2012 R2 which has IE11 installed on it.
Flash Player is also embedded with IE.
IE Version: 11.0.9600.17278.
Updated Version: 11.0.12 (KB2977629)
When I launch SCORM (flash Player Content) from my application, it is not working. It just displays a blank page however the Title of IE is set to the text from the SCORM content.
However if I access the same URL from any other machine which has previous version of Windows OS (i.e. previous to Windows 8 OS), it is working as expected on IE9, IE10 and IE11.
While trying to find out the cause, I came across some forum which says we have to install the “Desktop Experience” on the server to enable the inbuilt flash player. After doing that also, My SCORM contents are not getting displayed.
To find out more details, I have uploaded the SCORM Package on SCORM Cloud to check if it is working there. Here again the same problem, it doesn’t work and displays
error message saying that “Member is not found” and when I tried to find out the location of the error then it is coming at
Windows.document.myFlash.setVariable(…) method on the Windows Server 2012 R2 with IE11.
When I performed “Addwatch”, it is saying that Windows.document.myFlash doesn’t have setVariable(…) method.
However if access the same cloud URL from other machine (Having OS previous to Windows 8 OS), it is working as expected.
I have attached the screenshot of the error.
Any help would be appreciated.
Thanks

Hello,
I'd ask the SCORM package provider or in Microsoft's ASP.Net forums:
http://forums.asp.net/
As Microsoft's ASP.Net forums are on a different platform, we cannot move the question for you.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Which windows Server 2012 IOS can be install on Virtualbox 4.3.6

I download window server 2012 database IOS evaluation to install on Virtual Box 4.3.6, and it NOT installed fine.
However, when I try to install on my laptop, it INSTALL fine. IOS evaluation and VHD evaluation, which of this two can work with virtualbox 4.3.6 ?

For compatibility there is this webpage
http://www.windowsservercatalog.com/
HTH
Milos

DirectAccess Client not connecting without error code on Windows Server 2012 R2 and Windows 8.1

Hello,
we are currently migrating from Windows Server 2012 to 2012 R2 and are not able to get the new Direct Access Service up and running. Our goal is to establish DirectAccess connection for a handful of clients using the IPHTTPS-adapter on the default port 443.
Errors:
There is actually no error showing up. It seems the infrastructure tunnel cannot be created but none of the IPv6-transition adapters is connecting (teredo and 6-to-4 are down) and the IPHTTPs adapter gives no informations about a problem:
>Get-DAConnectionStatus
Status : Error
Substatus : CouldNotContactDirectAccessServer
>Get-NetIPHttpsState
LastErrorCode : 0x0
InterfaceStatus : Failed to connect to the IPHTTPS server; waiting to reconnect
Setup:
Our setup is a virtualized Windows Server 2012 R2 Standard running on Hyper-V. It is located behind a NAT having the Port 443 mapped to the server. The only role installed after the basic install is RRAS including DirectAccess and VPN. The assistants completed
successfully (running the configuration for DirectAccess and VPN). Operation Status says everything is green und working (for multiple days in the meanwhile). A previous direct access installation (on a different machine running Windows Server 2012) has
been removed before installing the new server. The new installation is using a different router, so this might also be the cause of a problem.
The client is a Windows 8.1 notebook located outside the company network accessing the internet through another NAT-device. The client has been able to connect to the previous DirectAccess setup but has never been able to establish a connection after the
setup of the new Direct Access server. The device has no outbound constraints concerning the NAT-device and is only running the integrated Windows Firewall.
Diagnosis:
So far I've done some basic DNS and connectivity checks. The DNS-name can be resolved correctly and the router even responds to pings. The port forward is working and HTTPs connections are generally possible (temporarily routed the port to
access the NLS-Website located on the server, which worked fine).
Network monitor shows that both computers are communicating, traffic on the expected Port 443 is incoming on the server and responses from the server reach the client.
Opening the IPHTTPs-url and in an endless page load. Sometime the browser page closes but I've never seen any result. Using telnet on the port shows that the server is accepting connections. I've even build a small test application that does a GET-Request
on the URL returning HTTP-200 and no content.
I'm currently running out of ideas what to do and since no error occurs this is kind of a bit frustrating. Any help appreciated.
Regards
Matthias

Hi,
In addition, have you disabled the DA client components on the DA client? If no, please also check
the settings on the Name Resolution Policy Table.
More information:
DirectAccess
Client Location Awareness – NRPT Name Resolution
In addition, error 0x4C9 means the remote computer refused the network connection. It may be due to the invalid
registry or corrupt drivers. For more detailed information, please refer to the link below:
Error 1225 - Error Code 0x4C9
Note:
Microsoft is providing this information as a convenience to you. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Susie

Windows Media Player on Windows Server 2012 R2 Datacenter Edition

I have a server with Windows Server 2012 R2 Datacenter edition installed. This server is being used as a terminal server and I needed to have Windows Media Player installed in order to use a certain feature of a program running on the terminal server. After
researching online I found that all I should need to do is install the Desktop Experience feature and Windows Media Player was included in that. After installing the Desktop Experience feature and restarting the server, I was not able to find Windows
Media Player anywhere. I tried the same process on another server running Windows Server 2012 R2 Datacenter with the same results.
I was curious as to if this was a Datacenter thing where it was specifically not included with Datacenter edition. I was not able to find any documentation stating that WMP was not included in Datacenter, and everything that I found stated that the feature
sets for Standard and Datacenter were the same, it was just the licensing for them was different.
Curious to see if it would get installed with Desktop Experience on Standard, I spun up a Windows Server 2012 R2 Standard VM and installed Desktop Experience and sure enough WMP was installed as well. I then upgraded the Standard VM to Datacenter with a
Datacenter product key and after a restart WMP was still present.
I have also tried this exact same process with Windows Server 2012 (non R2) Datacenter edition and WMP was installed as expected, so it appears that this is only a problem with R2.
My question is, I this "works as designed" and I was just not able to find the documentation to support it or is this a bug?
Update: After doing some more playing around I noticed that if I did a clean install of Windows Server 2012 R2 Datacenter and then installed the Desktop Experience feature and WMP does get installed. Then I remembered that on the servers that I was trying to
install WMP on and it wasn't working were upgraded from 2012 to 2012 R2. So I created a brand new VM and installed Server 2012 Datacenter (non R2), then upgraded to Server 2012 R2 Datacenter and installed Desktop Experience and sure enough, WMP did not
install. So now I really think it is a bug and it is related to the 2012 to 2012 R2 upgrade process.

Hi Caleb CSG,
Thanks for your feedback.
I'll feedback a report to Microsoft, and I also recommend you can post this bug in Microsoft connect.
https://connect.microsoft.com/WindowsServer/feedback/CreateFeedbackForm.aspx?FeedbackFormConfigurationID=5352&FeedbackType=1
Best Regards,
Anna
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Office 2013 + Terminal Server Environment + Windows Server 2012 R2

- Problems with Office 2013 (excel & Word) when use Roaming Profile (By Citrix) and folder redirection.
Environment:
2 x Windows Server 2012 R2 with Terminal Services installed and Office 2013 Professional Plus. Also this server are memeber of environment of Citrix XenDesktop 7.1
Problem:
In two servers I have installed Office 2013 Proffesional Plus and I have try to access to excel by Citrix.
When I open excel with roaming profile (by citrix) activated, when I began to write I get a pop-up with the message:
"Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space"
And when I try to save the document I get the same message, and excel "crash" and closed.
If I stop the roaming profile service. All works properly.
The tests that I had made were:
- Change DCOM config with correct permission.
- Repair Office 2013 Installation.
- Disable Protected Mode.
Anybody could help me???
Thanks in advance !!!

Just searched a littler bit on this, below links might be helpful:
http://howtoconfig.org/windows/excel-not-enough-available-memory-or-disk-space-available/
http://social.technet.microsoft.com/Forums/office/en-US/2c753037-4600-4a4f-abd7-d228e2f20a38/2146827284microsoft-excel-cannot-open-or-save-any-more-documents-because-there-is-not-enough?forum=officesetupdeployprevious
http://kb.jetreports.com/article/AA-00914/0/Microsoft-Excel-cannot-open-or-save-any-more-documents.html
Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders and modify the key Cache with a valid path (ie: C:\Windows\Temp ).
Hope this helps.

Windows Server 2012 Used: Error Message from Windows 7 PC: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator.

We are using Windows Server 2012 Standard installed in VMWare / Virtual machine and to access this we use vSphere client and Remote Desktop Connection / service was already enabled and was working fine with User PCs / laptops remote desktop into the server
2012, until it gave an error message of: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator. whilst logging into the server.
We DON'T use Active Directory nor and we don't use domain and not looking to use it any-time soon.
I checked the RD Licensing Diagnoser and it says the grace period has expired and the licensing mode for the remote desktop session host server is not configured. I have checked the Remote Desktop Gateway has been stopped and I tried to start it and it
resumed to stop, here I assume its where the licensing part comes in to re-enabled this.
I have been trying to follow these articles online: http://ryanmangansitblog.com/2013/03/27/deploying-remote-desktop-gateway-rds-2012/ and http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install the overview part that I cannot get into,
because I think we have to be is AD DS for this which we don't. Is there a way around this for non domain / just standalone set-up? Is it a must / requirement we need to be in a domain in order for Remote Desktop Connection to work?
Also, we have a Windows Server 2012 RDS CALs - 10 (software and licence key), will the licence key work for the Windows 2012 Server Standard? We do not want to install the other Server mentioned which comes with CAL / licence key as its time consuming
to reinstall other programs. I have installed Server role service of Remote Desktop Licencing and automatically installed other associated services needed. in the RD Licencing Manager, the Server had a red cross and I "Activate Server"
where I followed: http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install in Install Licences section and I have used the licence key of CAL - 10 mentioned above; it stated I have successfully completed the install licences wizard and displayed:
10 Windows Server 2012 - RDS Per User CAL installed, and in the RD Licensing Manager the server turned into a green tick and added the licence.
I then tested the Remote desktop connection from my PC and the same error message was there and checked the RD Licensing Diagnoser and the same error messages was there. I haven't restart the services of Remote Gateway / the server itself; do I really
need to reboot server?
Any advice / guidance would be very much appreciated and this is a urgent matter.
Thank you for your time.

Hotfix Released here:
http://support.microsoft.com/kb/2916846

Windows Server 2012 R2 eval refuses to install

Similar Messages

Maybe you are looking for