Windows SMTP service - restrictions

Hi
I have installed a SMTP service under IIS 6.0 in windows 2008 R2
I would like to know if is possible to restrict the SMPT traffic to specific domains
Example: i only want that only relay traffic to google.com
Thanks in advance.

Hi,
Please refer to Don's suggestion in following thread and check if can help you.
restrict destination domain on SMTP service
In addition, for your current issue, I suggest that you should post it in
IIS forum. I believe we will get a better assistance there.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Exchange 2013 SMTP service delayed / slow acknowledgement

Hey Guys,
since we upgraded from Exchange 2010 to Exchange 2013 (SP1) any SMTP Receive Connector we create (including the default one) show the same strange behavior. When you send an email (no matter if internal or external) it sometimes takes
up to 30 seconds for the exchange server to acknowledge the message. Using the SMTP log I see the following entries:
2014-08-08T08:58:29.053Z,                       MAIL FROM:<[email protected]>,
2014-08-08T08:58:29.053Z,                       SMTPSubmit SMTPAcceptAnySender SMTPAcceptAuthoritativeDomainSender AcceptRoutingHeaders,Set
Session Permissions
2014-08-08T08:58:29.053Z,                       receiving message
2014-08-08T08:58:29.053Z,                       250 2.1.0 Sender OK,
2014-08-08T08:58:29.053Z,                       RCPT TO:<[email protected]>,
2014-08-08T08:58:29.053Z,                       250 2.1.5 Recipient OK,
2014-08-08T08:58:29.053Z,                       DATA,
2014-08-08T08:58:29.053Z,                       354 Start mail input; end with <CRLF>.<CRLF>,
2014-08-08T08:58:29.068Z,                       Proxy destination(s) obtained from OnProxyInboundMessage event
2014-08-08T08:58:40.960Z,                       "250 2.6.0 <5160cd2a-9160-4a35-9007-1f9c17761bc0@--------> [InternalId=17776869639170,
Hostname=-----------] Queued mail for delivery",
As you can see there’s a delay between 08:58:29 and 08:58:40 where nothing happens. The sending smtp service waits for the server to acknowledge the message – at least that’s what I guess. Since we use this kind of connector a lot for
internal mail traffic with non-Outlook clients it is essential to get rid of this issue. For example using Trac Ticket system or Subversion also leads to slow or delayed responses. Creating a ticket in Trac sometimes takes up to a Minute since several emails
are created and sent in background processes. We didn’t have this issue with Exchange 2010 and I actually couldn’t find much using google.
Since there's no error showing it's quite difficult to track down the issue. After I did some researching I tried configuring the receive connector to change this behavior but nothing helped. I tested the following options:
MaxAcknowledgementDelay 00:00:00
TarpitInterval 00:00:00
MessageRateSource None
MessageRateLimit unlimited
MaxInboundConnectionPercentagePerSource: 20
MaxInboundConnectionPerSource 100
I Also took a look at the Throttling Policies with no luck either.
Calling the Microsoft support simply led to the typical “we do not support 3<sup>rd</sup> party issues”. In fact this is NOT a third party issue but arguing didn't help. I tested every possible solution I found and after weeks
I simply dont' have the slightest idea any more, how to solve the problem.
Some information about our Exchange environment:
Exchange DAG with 2 servers
Windows Server 2012 (latest updates)
Exchange 2013 SP1 installed
Disabling DAG members also didn’t help and all the members show the same behavior no matter which connector I choose to use.
Any hint or idea would be very much appreciated.
Thanks,
Christoph

Hi Christoph,
From the SMTP session, the delay happened when processing data. This can be caused by several factors, such as the length of message content.
In Exchange 2013, we have the function called shadow redundancy, the transport server makes a redundant copy of any messages it receives before it acknowledges successfully receiving the message back to the sending server. This helps to ensure that all messages
in the Exchange 2013 transport pipeline are made redundant while they're in transit. If Exchange 2013 determines the original message was lost in transit, the redundant copy of the message is redelivered.
For more information about shadow redundancy, we can refer to the article:
Shadow redundancy
http://technet.microsoft.com/en-us/library/dd351027(v=exchg.150).aspx
By default, it is enabled, and if we want to disable it, we can use the command:
Set-TransportConfig –ShadowRedundancyEnabled $false
Best Regards,
Tracy Liang

Issues about smtp service of mail.app

Problem replicating:
1. Log in an email account, say Gmail in the system preference.
    --> You can receive and send email in the Mail.app normally.
2. Change password of the email account on website (Gmail).
     --> Fail to receive email in the Mail.app. (Of course...)
3. A window (from system preference) pop-up and tell me I need to enter the new password; and I did.
    --> Doesn't work! The window just keep warning me that the connection cannot be established and keep asking for new password. (Issue One)
4. Well, I delete the entire account in the preference setting; and then, do all the account setting again, using the new password.
   --> Account setting successfully. And the Mail.app seems work properly again (IMAP service function normally).
5. However, if you try to send an email via the Mail.app; it will warn you that the smtp service cannot be connected. (Issue Two)
6. After some research, it seems that the Mail.app still using the old password for smtp service, even I have deleted the entire account from the system!
I am using Yosemite 10.10.1, and all softwares are up-to-date (29.1.2015).

OK, so go into your email app, click on Mail, Preferences, Accounts. Find the account you're looking for and click on it to highlight it. Under "Account Information" the option for Outgoing Mail Server (SMTP) there will most likely be an SMTP account selected. Click on the up/down arrow next to it, then choose Edit SMTP server list. From there you can go 2 ways. You can either edit the current server, or delete it and start over and add the SMTP server that will allow you to send mail. You'll need the correct account information for that and the advanced settings, as well. Usually, it's an SSL connection with password as authentication. Your username will most likely be your gmail address and then whatever your password is to receive mail. Do not check the box to allow insecure authentication. Check the box next to "Use SSL."
That should clear it up for you. If you have more than one email account - gmail or otherwise - you'll need to set up a separate SMTP server for each account.
Hope this helps. Happy emailing!

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Windows Search Service Crashes on Windows Server 2012 R2

Hi,
I'm running Windows Search service on a Windows Server 2012 R2 (24GB RAM, 8-core proc). The index catalog has a little over 2 million items (files and folders indexed).
Every once in a while this service crashes, and either remains in limbo or automatically recovers and restarts the index from zero. I'm trying to find out information about what may be causing the crashes and about how to prevent them. Unfortunately, I don't
seem to be able to find much about the Windows Search service on Windows Server 2012 R2. So anyone who may have input on this, please chip in.
Additional info:
- As mentioned above, the server OS is Windows Server 2012 R2. This is a physical server with 24GB RAM, 8-core proc and over 2TB of storage.
- This server acts as a DC and as a File Server. In addition to this and Windows Search service, there are no other major services running here
- Symantec Endpoing protection is installed and running on this server, but I've made sure to exclude the Window Search database from SEP
Here are some of the errors that are generated when the issue happens:
The error below may show up in the event logs. If it shows up more than once, the indexing service has likely crashed and won't recover.
Log Name: System
Source: Service Control Manager
Date: 1/23/2015 3:32:15 PM
Event ID: 7011
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: myserver.mydomain.local
Description:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the WSearch service.
I attempted to stop the indexing service, but it didn't stop. I noticed though that the indexing GUI started responding as soon as the
the service stop command failed. The indexing service seems to have picked up where it was (~300K items) and continued indexing.
Logs sequence:
Log Name: Application
Source: ESENT
Date: 1/23/2015 3:57:01 PM
Event ID: 102
Task Category: General
Level: Information
Keywords: Classic
User: N/A
Computer:
myserver.mydomain.local
Description:
SearchIndexer (18232) Windows: The database engine (6.03.9600.0000) is starting a new instance (0).
====
Log Name: Application
Source: ESENT
Date: 1/23/2015 3:57:01 PM
Event ID: 300
Task Category: Logging/Recovery
Level: Information
Keywords: Classic
User: N/A
Computer:
myserver.mydomain.local
Description:
SearchIndexer (18232) Windows: The database engine is initiating recovery steps.
====
Log Name: Application
Source: ESENT
Date: 1/23/2015 3:57:01 PM
Event ID: 301
Task Category: Logging/Recovery
Level: Information
Keywords: Classic
User: N/A
Computer:
myserver.mydomain.local
Description:
SearchIndexer (18232) Windows: The database engine has begun replaying logfile X:\IndexingService\Search\Data\Applications\Windows\edb0053D.log.
====
Log Name: Application
Source: ESENT
Date: 1/23/2015 3:57:01 PM
Event ID: 301
Task Category: Logging/Recovery
Level: Information
Keywords: Classic
User: N/A
Computer:
myserver.mydomain.local
Description:
SearchIndexer (18232) Windows: The database engine has begun replaying logfile X:\IndexingService\Search\Data\Applications\Windows\edb0053E.log.
====
Log Name: Application
Source: ESENT
Date: 1/23/2015 3:57:02 PM
Event ID: 301
Task Category: Logging/Recovery
Level: Information
Keywords: Classic
User: N/A
Computer:
myserver.mydomain.local
Description:
SearchIndexer (18232) Windows: The database engine has begun replaying logfile X:\IndexingService\Search\Data\Applications\Windows\edb.log.
====
Log Name: Application
Source: ESENT
Date: 1/23/2015 3:57:02 PM
Event ID: 302
Task Category: Logging/Recovery
Level: Information
Keywords: Classic
User: N/A
Computer:
myserver.mydomain.local
Description:
SearchIndexer (18232) Windows: The database engine has successfully completed recovery steps.
====
Log Name: Application
Source: ESENT
Date: 1/23/2015 3:57:02 PM
Event ID: 105
Task Category: General
Level: Information
Keywords: Classic
User: N/A
Computer:
myserver.mydomain.local
Description:
SearchIndexer (18232) Windows: The database engine started a new instance (0). (Time=1 seconds)
Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.000, [4] 0.032, [5] 1.046, [6] 0.094, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000.
====
Log Name: Application
Source: ESENT
Date: 1/23/2015 3:57:02 PM
Event ID: 326
Task Category: General
Level: Information
Keywords: Classic
User: N/A
Computer:
myserver.mydomain.local
Description:
SearchIndexer (18232) Windows: The database engine attached a database (1, X:\IndexingService\Search\Data\Applications\Windows\Windows.edb).
(Time=0 seconds)
Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.016, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000, [11]
0.000, [12] 0.000.
Saved Cache: 1 0

Hi,
Thanks for your post.
To resolve this problem, use the Registry Editor to change the default timeout value for all services.
http://social.technet.microsoft.com/wiki/contents/articles/13765.event-id-7011-service-timeout.aspx
Please note before making changes to the registry, you should back up any valued data.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HP UFT 12.02 not installing on Windows 7 Service Pack 1

HP UFT 12.02 is not installing on Windows 7 Service Pack 1. But the Install Guide says it supports and recommends Windows 7 Service Pack 1 as the Operating System.

Hey Hello Dear,
   Please upgrade UR windows 7 Service pack to Service pack 2.
   from my knowledge for SQL SERVER 2012 it requires Windows 7 service pack.
   And before installing SQL server 2012 Plz activate .NET framework for that,
   Put UR windows 7 Format CD then,
   Run Command prompt as Administrator and paste following cmd in that
DISM.exe /online /enable-feature /featurename:NetFX3 /All /Source:c:\net35 /LimitAccess
it will take 2 min. after that restart your PC and try to install SQL server 2012.
Note: Before installing SQL SERVER again format UR PC/lapy once.
After this if it gives error while installation then plz change ur setup and try again.
This will be helpful.
Best of Luck
Regards,
Sandesh

Windows Firewall Service Crashes on Windows Server 2012

Hello Team,
I am facing issues with Windows Firewall Service in new Windows 2012 R2 deployments. when i try to start the Firewall service it wont start and it throws an error message to check the system event logs for information
The Windows Firewall service terminated with the following service-specific error:
The data is invalid.
I deployed this OS on a VM running with latest VM tools and HW version which is running on ESXi 5.1 U1
2 GB RAM, 1 vCPU
OS deployed through ISO downloaded from MS portal and License activated through KMS system, performed a couple of reboots as well.
any advise on this issue? i am sure some of you might have also faced the same issue

1. VMware support forum and knowledge base may give you more specific advice.
2. Windows services may be dependent on another service(s). Analyze these dependences. Do it after you understand implications of VMware firewall function.
3. More detailed info from Event log is needed for analysis (Event ID, etc)
4. Hope you have connectivity configured correctly.
5. For firewall in VMware read the following article(s):
http://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.vsphere.security.doc%2FGUID-52188148-C579-4F6A-8335-CFBCE0DD2167.html&__utma=207178772.2027713003.1393320147.1393320147.1393320147.1&__utmb=207178772.0.10.1393320147&__utmc=207178772&__utmx=-&__utmz=207178772.1393320147.1.1.utmcsr=google|utmccn=(organic)|utmcmd=organic|utmctr=(not%20provided)&__utmv=-&__utmk=174193441
Regards
Milos

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

Windows Search Service failing to install on Windows Server 2008 R2 Terminal Server

Hi,
I am unable to install the Windows Search Service on a Server 2008 R2 Terminal Server. I want to install this to enable indexing options within Outlook 2013 for all users.
Server Manager > Add Roles > File Services > Select only Windows Search Service > Install.
The error I receive: "Attempt to configure Windows Search Service failed with error code 0x80070057. The parameter is incorrect."
Thanks,
Bjorn

Hi,
I did the test and could install the Windows Search Service without problem.
Which role did you installed on the terminal server?
Did you try to install it on another windows server?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows Search Service Best Pratices on RDP Server with office 2013

high everybody,
i´m looking for guide how to configure the Windows Search Service on our Server 2012 RDS Servers. The Servers have Office 2013 installed so turning off the Search Service is not an Option. We are using User Profile disks and logoff was getting slower
as time goes by. Reading in another thread if have deleted the Subkeys under
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Search\CrawlScopeManager\Windows\SystemIndex\DefaultRules
and restarted the Search Service.
This Resulted in a lighning fast logoff ( less then 5 Seconds) before that logoff took up to 2 Minutes. Looking at the Reg Key´s i found that underneth the mentioned Key there was a subkey for each user that has EVER loged on to this Server. Normal load
should be about 30 Users and i found about 700 subkey´s. To it seems that this causes the Search Service searchindexer.exe to read thru all this key´s witch i think is not the Problem ( Internet Explorer does far more reads and writes) but what happens
with the Information.
Maybe it has to to with the fact, that we are using User Profile Disks ?
In the Search Service Policy i have excluded "C:","users homedrive" and the Share where the Users share theyr data, for the Search Service to exclude.
So does anybode have experience with Seach Service on RDS Servers with Office maybe with User Profile Disks ?
Thanks Reiner

Hi Reiner,
You can check the following article might helpful to resolve your case.
Incomplete search results may occur in Outlook when a PDF iFilter is installed
http://support.microsoft.com/kb/2925203/en-us
Also try uninstalling office 2013 application and then reinstall by running change user /install command in elevated command prompt on RDS server prior to install software's. Post software installation you need to run
change user /execute command on server
http://technet.microsoft.com/en-us/library/cc742815.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Is there a way to change the Windows Update service startup type on Windows Server 2012 R2?

We have a number of newly built 2012 R2 servers that we have HP Operations Manager agent running on that monitors the status of several services and reports if they are "stopped". One of these services is Windows Update. Every day we
get at least one alert saying:
"Service "Windows Update" is not started. Current state is stopped"
Checking the event logs shows that the Windows Update service stops, then a while later it just starts again. Not an error, just an information event.
In Windows 2012 R2 the Windows Update service is set to "Automatic (Trigger Start)", where in previous versions we run (2012/2008R2) it would be set to just "Automatic" or "Automatic (Delayed Start)"
I have come to understand that this behaviour is normal for Windows 2012 R2, and that Trigger Start services by design stop themselves after a period of inactivity. I was unable to find any info on how this works. Our client would like this to
be changed and the Windows Update service stay running all the time, understanding that this impacts performance.
Is there a way to change the Windows Update service in Server 2012 R2 to the old Automatic startup behaviour so that it stays running all the time instead of stopping and starting periodicall? There is no option to do this via the services mmc
gui.
So far I have tried:
Removing the Triggers using the command: sc triggerinfo wuauserv delete
This works temporarily, the service then shows as just Automatic in the services console, however if you restart the server or restart the service it goes right back to being Automatic (Trigger Start).
Any kind of help would be appreciated.

This one might help.
Allow configuration of Automatic Updates in Windows 8 and Windows Server 2012
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Error 1719. The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. Getting this error while installing the package in the windows 2012.

Getting below mentioned error while installing a package in the windows 2012 server remotely through psexec command
Error 1718. Windows Installer Service could not be accessed.
The same msi is getting installed local in through when we are doing through manually
Please help on the same

Hi Rahulan,
Would you please let us know current situation of this issue? If any update, please feel free to let us know.
Just addition, please refer to following threads and check if can help you.
The Windows Installer Service could not be accessed.
error 1719 windows installer service could not be accessed ....
Hope this helps.
Best regards,
Justin Gu

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.

This thread is pretty old, are you still having this issue?

Error encountered while signing: The Windows Cryptographic Service Provider reported an error: Access was denied because of a security violation. Error Code: 2148532330

Last night when i tried to sign a document i received the mesage below and after that it says this document can't be signed what can i do to fix this problem.
Error encountered while signing:
The Windows Cryptographic Service Provider reported an error:
Access was denied because of a security violation.
Error Code: 2148532330

I assume you are implying "biztax" application here, right?
I have contacted their program lead, with no result at all.
Past days I have been searching for a solution - reinstalls / new systems - no solution.
This issue appeared a week or two ago only.
I found http://forums.adobe.com/message/5338853 useful - but no positive results either.
http://test.eid.belgium.be/faq/faq_nl.htm obviously didnt help either.
If anyone finds a solution to this issue, please do let me know - any help is appreciated.
Biztax tells to use the "signature", not the "authentication" - but it is only Auth. that is showing up as option to sign (that works)
ps, did you fiddle with the Adobe Reader XI security settings and import that PKI etc as well? I hoped that would be the breaktrough. Sadly i'm still crying in my chair.
Oh, and dont forget: they claim nobody else got this issue. Maybe one or two people. (We got about 8 customers experiencing exactly the same symptoms at the same time )
> I noticed that when I try to open the pdf document that is 'signed' by the government it is not showing the filename in the title bar, but only " - Adobe Reader". every piece of info helps I guess.
Obviously last version of Reader 11.0.03

Getting 415 Unsupported Media Type error when calling a windows web service

I have a BPEL process that invokes a windows web service. This process is working currently on the production system. When trying to run the process in a new test clustered environment, I'm getting the error below (bolded).
We're using 10.1.3.3 Oracle Application Server and BPEL. Please advise on what config files might need to be tweaked to fix this.
InvokeWindowsLoggingWebService(faulted)
[2010/04/16 17:26:35] Faulted while invoking operation "WriteLog" on provider "WindowsLoggingWebService". less
-<messages>
-<input>
-<InvokeWindowsLoggingWebService_InputVariable>
-<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="parameters">
-<WriteLog xmlns="http://tempuri.org/">
<FileAbsolutePath>
R:\CV & RM\upload_from_test.log
</FileAbsolutePath>
<Content>
||*************************************************************************************|Append to log file 2010-04-16T16:57:08-04:00|*************************************************************************************||START DATE: 2010-04-16T16:57:08-04:00|END DATE: 2010-04-16T17:25:58-04:00|COUNT: 106|TRANSFER OF FILES TO TAS SUCCESSFUL
</Content>
<NewLineDelimiter>
|
</NewLineDelimiter>
</WriteLog>
</part>
</InvokeWindowsLoggingWebService_InputVariable>
</input>
-<fault>
-<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="summary">
<summary>
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 415 Unsupported Media Type
</summary>
</part>
</remoteFault>
</fault>
</messages>
[2010/04/16 17:26:35] "{http://schemas.oracle.com/bpel/extension}remoteFault" has been thrown. less
-<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="summary">
<summary>
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 415 Unsupported Media Type
</summary>
</part>
</remoteFault>

I generated a proxy service in jdev and used the same parms as was done on OAS...
<WriteLog xmlns="http://tempuri.org/">
<FileAbsolutePath>
R:\CV & RM\upload_from_test.log
</FileAbsolutePath>
<Content>
||*************************************************************************************|Append to log file 2010-04-16T16:57:08-04:00|*************************************************************************************||START DATE: 2010-04-16T16:57:08-04:00|END DATE: 2010-04-16T17:25:58-04:00|COUNT: 106|TRANSFER OF FILES TO TAS SUCCESSFUL
</Content>
<NewLineDelimiter>
|
</NewLineDelimiter>
</WriteLog>
and was able to call the service fine and it returned successful. Just seems to be an issue on the server when I execute it from there.

Windows SMTP service - restrictions

Similar Messages

Maybe you are looking for