Wine crashes on install

Everytime I Try to use wine to install (most notably starcraft) it will almost finish then the x server will die complaining about nearly everything losing its connection to the xserver
This happens on both a 64bit and a 32bit install.

It crashes when it reaches the "Scheduling Apple Updates"
That suggests we might be having trouble with Apple Software Update.
Can you check something for me, please? Try launching your Apple Software Update ("Start > All Programs > Apple Software Update"). Does it open correctly or do you get an error message?

Similar Messages

Lost all files in crash while install of at 7

lost all files in crash while install of at&t internet gateway

Thanks. I will try this. My previous machine was running Vista and I
rarely compacted folders. NEVER had a problem. Apparently
Win 8.1 is more sensitive to this.

Crash when installing Oracle9i on Windows

If you have a crash when installing oracle9i on Win 2000
(for example The instruction at "0x77fca30c" referenced memory blah blah blah), the problem could be your classpath.
Try the following in a command window:
cd Disk1 (or wherever you have unzipped oracle)
set CLASSPATH=
setup
I guess it is a bug in the installer. I didn't try to isolate it, my classpath is too big!

I just checked this again, at work, on my 2000 machine. I changed my locale to saudia arabia and that resulted in the alignment you mentioned earlier. I switched it back to its default english - united states and the alignment is no loner at the right.
In addition to that my nls_lang setting is :
AMERICAN_AMERICA.WE8MSWIN1252
Note though, that simply changing the locale did it for me, regardless of my nls_lang setting.

HP Pavilian m7050y & Monitor HP vs 19c keeps crashing after installing windows 7

Hi Forum Experts, hope all is well. Hopefully someone will be able to help me with this problem.
My HP Pavilian m7050y & Monitor HP vs 19c keeps crashing after installing windows 7.
I knew there was a problem when I first installed windows, because the windows logo was not centered on the monitor after intial startups. I did adjust it a little by pressing auto/select on my monitor, and that helped with the centering a bit but it is not perfectly centered.
The screen goes blue and this is the message I get when it crashes and restarts.
Problem has been detected and windows has been shut down to prevent damage
to your computer.
attempt to reset the display driver and recover from timeout failed.
if this is the first time you've seen this stop error screen,
restart your computer, if this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select safe mode.
Technical Information
*** STOP: OX00000116 (0X85E75330, 0X9303C5BC, OX00000000, 0X00000002)
*** atikmdag.sys - Address 9303C5BC base at 9302C000, DateStamp 49f1996c
Collecting data for crash dump ...
Initializing disk for crash dump ...
Beginning dump of physical memory.
Dumping physical memory to disk:
the message is also slightly of to the left it really reads like this.
Problem has been detected and windows has been shut down to prevent damage
o your computer.
ttempt to reset the display driver and recover from timeout failed.
f this is the first time you've seen this stop error screen,
estart your computer, if this screen appears again, follow
hese steps:
heck to make sure any new hardware or software is properly installed.
f this is a new installation, ask your hardware or software manufacturer
or any windows updates you might need.
f problems continue, disable or remove any newly installed hardware
r software. Disable BIOS memory options such as caching or shadowing.
f you need to use safe mode to remove or disable components, restart
our computer, press F8 to select Advanced Startup Options, and then
elect safe mode.
echnical Information
** STOP: OX00000116 (0X85E75330, 0X9303C5BC, OX00000000, 0X00000002)
** atikmdag.sys - Address 9303C5BC base at 9302C000, DateStamp 49f1996c
ollecting data for crash dump ...
nitializing disk for crash dump ...
eginning dump of physical memory.
umping physical memory to disk:
Once windows is fully rebooted all pages, and the display look ok, until it crashes again. I searched for updated drivers on the HP and Windows site but could not find any. The one that is currently installed is called (Generic Pnp Monitor).
Thanks in advance for your expert advice.
Juan.

Thank you for the additional information.
Did you run the Win 7 Upgrade Advisor to assure that your computer is compatible? There may be a problem with compatibility. Also, which version of Win 7 are you running; 32-bit or 64-bit?
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Counterstrike Source start = Wine Crash

Hi,
first: sorry for my bad english.
i'm new to linux but until now i solved each of my problems by reading wonderful wiki/forum threads, but now i dont know what i can do...
i want to play counterstrike source... installed steam (wiki)
if i double kick on counterstrike source wine crashes with the following error message:
----> steam startfixme:mixer:ALSA_MixerInit No master control found on HDA ATI HDMI, disabling mixer
fixme:process:SetProcessShutdownParameters (00000100, 00000000): partial stub.
CellID: Fetching server list from CSDS. . .
fixme:urlmon:CoInternetSetFeatureEnabled 5, 0x00000002, 1, stub
fixme:urlmon:CoInternetSetFeatureEnabled 10, 0x00000002, 1, stub
err:ntlm:SECUR32_initNTLMSP ntlm_auth was not found or is outdated. Make sure that ntlm_auth >= 3.0.25 is in your path.
err:ntlm:SECUR32_initNTLMSP Usually, you can find it in the winbind package of your distribution.
CellID: CSDS returned 171 servers.
CellID: Connecting to 65.113.241.34:27031. . .
CellID: Connect to 65.113.241.34:27031 took 194 MS
CellID: Nothing beat our old best time of 34 MS
fixme:wbemprox:wbem_locator_ConnectServer 0x2b558a8, L"ROOT\\CIMV2", (null), (null), (null), 0x00000080, (null), (nil), 0x388d3ec)
fixme:wbemprox:DllCanUnloadNow
---------> game start
fixme:shdocvw:ViewObject_SetAdvise (0x2b58130)->(1 00000002 0x167d4d8)
fixme:shdocvw:PersistStreamInit_InitNew (0x2b58130)
fixme:shdocvw:WebBrowser_put_RegisterAsBrowser (0x2b58130)->(ffffffff)
fixme:shdocvw:WebBrowser_put_RegisterAsDropTarget (0x2b58130)->(ffffffff)
fixme:shdocvw:ViewObject_SetAdvise (0x2b58d28)->(1 00000002 0x167d578)
fixme:shdocvw:PersistStreamInit_InitNew (0x2b58d28)
fixme:shdocvw:WebBrowser_put_RegisterAsBrowser (0x2b58d28)->(ffffffff)
fixme:shdocvw:WebBrowser_put_RegisterAsDropTarget (0x2b58d28)->(ffffffff)
fixme:win:RegisterDeviceNotificationA (hwnd=0x10092, filter=0x32de50,flags=0x00000004),
returns a fake device notification handle!
err:ole:CoGetClassObject class {9a5ea990-3034-4d6f-9128-01f3c61022bc} not registered
err:ole:CoGetClassObject no class object {9a5ea990-3034-4d6f-9128-01f3c61022bc} could be created for context 0x1
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 5 (X_GLXMakeCurrent)
Serial number of failed request: 3429
Current serial number in output stream: 3429
i looked in winehq wiki/known problems... found nothing similiar
what can i do?
PS: if u need a log file post it
i hope u find a solution, this is the last problem to solve
i use ati pr. driver on _64 arch.

i tried all i can (installing from dvd....aprupt error...no chance), installed different versions of wine,...,... now i installed up to date wine32 with lib32 of catalyst (with your pkg build)
steam installed with this error
[cjn@cjn ~]$ wine uninstaller
fixme:advapi:LookupAccountNameW (null) L"cjn" (nil) 0x33f7e4 (nil) 0x33f7e8 0x33f7dc - stub
fixme:advapi:LookupAccountNameW (null) L"cjn" 0x15f858 0x33f7e4 0x15fe58 0x33f7e8 0x33f7dc - stub
fixme:msi:ControlEvent_SpawnWaitDialog Doing Nothing
fixme:msi:ACTION_HandleStandardAction unhandled standard action L"SetODBCFolders"
fixme:msi:msi_unimplemented_action_stub RemoveRegistryValues -> 2 ignored L"RemoveRegistry" table values
fixme:msi:msi_unimplemented_action_stub RemoveShortcuts -> 3 ignored L"Shortcut" table values
fixme:msi:ITERATE_CreateShortcuts poorly handled shortcut format, advertised shortcut
fixme:msi:ITERATE_CreateShortcuts poorly handled shortcut format, advertised shortcut
fixme:msi:ITERATE_CreateShortcuts poorly handled shortcut format, advertised shortcut
fixme:shell:DllCanUnloadNow stub
fixme:mscoree:LoadLibraryShim (0x7ec051ec L"fusion.dll", (nil), (nil), 0x33f7ec): semi-stub
err:module:import_dll Library MSVCR70.dll (which is needed by L"Z:\\home\\cjn\\downloads\\fusion.dll") not found
err:msi:ITERATE_Actions Execution halted, action L"InstallFinalize" returned 1627
err:msi:ITERATE_Actions Execution halted, action L"ExecuteAction" returned 1627
fixme:shell:DllCanUnloadNow stub
fixme:shell:DllCanUnloadNow stub
fixme:shell:DllCanUnloadNow stub
i use the installer function of wine uninstaller to install SteamInstall.msi, missing dll i download and put in system folder
i downloaded MSVCR70.dll
steam started after installing gecko render engine
downloaded counterstrike source again
i can start game but if i klick on a link like looking for servers,options, it get minimiced
Last edited by replicatorx (2009-08-22 02:58:46)

My iPhoto keeps crashing after installing the latest update, can't do anything!

My iPhoto keeps crashing after installing the latest update, can't do anything! It used to crash when importing but now I'm at the point where I open the software and after 2 seconds it crashes (nothing connected either). What to do? Can't access any photos

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If you can create a new library and import some test photos then the problem lies with your original library.
If that's the case make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If iPhoto crashes while trying to create a new library then try this:
Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
If that fails to help a reinstall of iPhoto is indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iPhoto from the disk it came on originally and apply all relavant updaters.
P.S. If you're still running Tiger, 10.4.6, then the above may not apply. If you're running a newer system you should update your profile so we have a better idea of where you're at.
OT

How to remove win 8 and install win 7 in bootcamp

I want to completely remove win 8 and install win 7 in bootcamp. I followed the steps in bootcamp assistant and it appears to remove the win 8 partition. However when starting a new win 7 bootcamp partition and installation setup still thinks win 8 is being used. how do I get it to recognize the win 7 now being installed from the usb drive? This is on an iMac 27 late 2012 with OS x 10.10.1

Hi Janesdf,
Welcome to Lenovo Community!
As per the query we understood that you are looking for Windows downgrade on your Ideapad N580.
Before doing any changes in the system HDD partition or with Windows OS, I suggest you to create the system recovery media and then you can downgrade the OS. But you require Windows 7 recovery media.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Satellite Pro P100 (PSPA4E) - No Sound Following Win 7 Clean Install

Hello, A European friend really struggling and looking for help.
I have just clean installed Win 7 Home Premium (64 bit) on a Satellite Pro P100 (PSPA4E) which was purchased in November 2006. It was previously running XP and I never installed Vista though the laptop is badged Vista Capable) I followed the Win 7 bios/driver/software install order but I now have no sound at all. Everything that I have tried so far has failed to fix it.
The laptop has a Conexant based audio solution with harman kardon speakers. Win 7 has installed the following driver which reports the following info.
High Definition Audio Device (Microsoft Driver version 6.1.7601.17514 dated 11/19/2010) and Device status: This device cannot start. (Code 10)
Hardware IDs:
HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_1179FF31&REV_1000 HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_1179FF31
There is a second exclamation mark in Device Manager for a further unknown device / uninstalled driver (showing code 28) for a device with a Hardware ID of ACPI\SMCB000 but I do not know what this device is!
Does anyone have any suggestions on a fix for my sound issue?
Thanks!
Martyn

Any one have any thoughts on this issue?
I have failed to locate a working / compatible Windows 7 x64 driver for Conexant HD Audio!
Perhaps there isn't one?
Perhaps I need to try harder?!?
Perhaps the on board sound solution featuring Conexant HD Audio is simply ****** as on www.conexant.com they say manufacturers have TOLD them NOT to make drivers available (... to poor unfortunate users)!!!
I think that manufacturers need to step up to the plate and support / help their customers. I own 4 Satellite Pro laptops running Vista x32 and Windows 7 x64. This one cost me well over £1,200 so I don't want to hear or conclude that it is simply scrap! That would represent truly poor value for money - the kind of business case that would undermine my belief that Toshiba laptops are the best in the business.
Ditto Microsoft - the Windows 7 x64 Upgrade Advisor tool gave me the all clear to upgrade this system. All generally appears fine EXCEPT the lack of sound.
Having now been exposed to the experience of many other laptop owners set out in various forums etc, covering both Toshiba laptops and some other major brands, I have to conclude that the Windows 7 Upgrade Advisor is flawed and that a successful upgrade is somewhat hit and miss affair. Beware!
That said, still hopeful that someone out there will be able to help me fix this issue?
Regards
Martyn
P.S. I can be reached by any Toshiba or Microsoft technical support guru looking to make a difference and help me out.

Trying to get Win 7 64 installed, not working

I am trying to get Win 7 64 installed. I have my dvd (downloaded a authorized version from Microsoft partners group, legal copy, we use it for other installs all the time). I imaged it to a dvd, should be all set.
Both Mac and Win side see the DVD. I go to my bootcamp utility, and go through that process. I am setting it up on my solid state drive that I just put into my CD slot. The DVD drive is now in an external housing hooked up VIA USB.
I then tell it to continue to format my new HD, and start the instal. It restarts, my DVD drive spins up and starts running. Then a gray screen comes up with the Apple in the middle. It then flashes, every now and then.
Can any of you give me some ideas? I have spent hours on this so far.
Thanks,
John

If you use Apple Disk Utility to burn the ISO, it won't work properly unless burned at reduced slowest speed 2x. Common and what I would consider "well known" but not documented, not put in the PDF guide in writing.
Sometimes it even boots and installs but bad install and fails. So in a way you were lucky it wouldn't start.

Imac Intel freezin & crashing since installing lion

My late 2009 24" iMac has been freezin and crashing since installing lion. Sometimes red dots appear on the display and sometimes the image breaks up and then freezes. Happens in Safari, Photoshop, Word and other programs. Is it a NVIDIA driver issue? Is there a fix?

I don't know if this helps, but OS X Lion has to re-index all of the files (correct me if I'm wrong), therefore, if you have just installed OS X Lion, you need to give it some time untill it has indexed all the files again (which could take a while if you have loads of files), after this it should return to normal.
Otherwise, a clean install?
Tim

Creating a partition after Win server 20i12r2 install

Hi I wish to allocate a separate partition for my my win server 2012r2 (hp proliant gen 6 server.) The win 2012r2 was installed in a hurry without partitioning the HD raid4 … The ADS and home directories of users are in place and I wish to transfer the user
data (home folders) to the New Partition. How do I go about without doing a fresh install. pl help

Hi Journville,
Do you mean you have install a server 2012R2 but used up all your current disk and you want to migrate the current user profile data to another partition? It is not support
scenario.
User Profile folder relocation
Folder Redirection is partially supported by OS:
Correct functionality of redirected folder is delegated to third party applications and could generate problem after OS installation
The Directory Database can be moved to others partition, you can refer the following related KB:
Move the Directory Database and Log Files to a Local Drive
http://technet.microsoft.com/en-us/library/cc816720(v=ws.10).aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Oracle 9i Application server crashing on install

oracle application server (Oracle9iAS) v1.0.2.2 is crashing on install the java application is failing with the following errors has any one else come across this problem and or found a fix for it?
we are using suse 7.2 and oracle 8i as the dbms.
below i the error message
thanks
Nick
CSIGILL 4* illegal instruction
stackbase=0xbffff194, stackpointer=0xbfffef18
Full thread dump:
"TaskScheduler timer" (TID:0x43fa01b0, sys_thread_t:0x507f6e0c, state:CW) prio=5
java.lang.Object.wait(Object.java)
oracle.ewt.timer.Timer._waitTilScheduled(Unknown Source)
oracle.ewt.timer.Timer.run(Unknown Source)
java.lang.Thread.run(Thread.java)
"Thread-5" (TID:0x44035f70, sys_thread_t:0x50940e0c, state:CW) prio=10
oracle.sysman.oii.oiit.OiitLockHeartbeat$HeartBeatThread.run(OiitLockHeartbeat.java:108)
"CursorIdler" (TID:0x4402ed10, sys_thread_t:0x50982e0c, state:CW) prio=5
java.lang.Object.wait(Object.java)
oracle.ewt.timer.Timer._waitTilScheduled(Unknown Source)
oracle.ewt.timer.Timer.run(Unknown Source)
java.lang.Thread.run(Thread.java)
"AWT-Finalizer" (TID:0x44024770, sys_thread_t:0x50888e0c, state:CW) prio=9
java.lang.Object.wait(Object.java)
sun.awt.AWTFinalizer.run(AWTFinalizer.java:40)
"Screen Updater" (TID:0x440243c8, sys_thread_t:0x50867e0c, state:R) prio=4
sun.awt.ScreenUpdater.nextEntry(ScreenUpdater.java:73)
sun.awt.ScreenUpdater.run(ScreenUpdater.java:90)
"AWT-Motif" (TID:0x440119d8, sys_thread_t:0x507d5e0c, state:CW) prio=5
java.lang.Thread.run(Thread.java)
"AWT-Input" (TID:0x440119f8, sys_thread_t:0x507b4e0c, state:R) prio=5
"AWT-EventQueue-0" (TID:0x44011a10, sys_thread_t:0x50793e0c, state:CW) prio=5
java.lang.Object.wait(Object.java)
java.awt.EventQueue.getNextEvent(EventQueue.java:126)
java.awt.EventDispatchThread.run(EventDispatchThread.java:70)
"Finalizer thread" (TID:0x4400b210, sys_thread_t:0x5042de0c, state:R) prio=1 "Async Garbage Collector" (TID:0x4400b258, sys_thread_t:0x5040ce0c, state:R) prio=1
"Idle thread" (TID:0x4400b2a0, sys_thread_t:0x503ebe0c, state:R) prio=0
"Clock" (TID:0x4400b088, sys_thread_t:0x503cae0c, state:CW) prio=12
"main" (TID:0x4400b0b0, sys_thread_t:0x80bf980, state:R) prio=5 current thread
ssgetenvux.performQuery(ssgetenvux.java:36)
oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:1301)
CompVariables.display_getCalculatedValue(CompVariables.java:386)
CompVariables.getCalculatedValue(CompVariables.java:235)
CompContext.getCalculatedValue(CompContext.java:117)
oracle.sysman.oii.oiis.OiisVariable.getCalculatedValue(OiisVariable.java:515)
oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:984)
oracle.sysman.oii.oiis.OiisCompContext.doOperation(OiisCompContext.java:578)
oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:116)
oracle.sysman.oii.oiic.OiicCompsWizEngine.doOperation(OiicCompsWizEngine.java:117)
oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:116)
oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:689)
oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:140)
oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:511)
oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:111)
oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:116)
oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:307)
oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:468)
Monitor Cache Dump:
sun.awt.motif.MToolkit@1140923032/1141276672: <unowned>
Waiting to be notified:
"AWT-Motif" (0x507d5e0c)
java.awt.EventQueue@1140922976/1141276936: <unowned>
Waiting to be notified:
"AWT-EventQueue-0" (0x50793e0c)
oracle.ewt.timer.Timer@1140455080/1152053976: <unowned>
Waiting to be notified:
"TaskScheduler timer" (0x507f6e0c)
sun.awt.AWTFinalizer@1141000048/1141541480: <unowned>
Waiti ng to be notified:
"AWT-Finalizer"

This is the forum for Forms questions. There is a seperate forum for iAS questions.
But I know the answer to this one. All of the doco is free and can be found on OTN, in the iAS product area.
Regards,
Robin Zimmermann
Forms Product Management

Dead iPad 1 crashed when installing iOS 5.1

Hi
My iPad 1 64 /3G which has all the regular crashing abilities discussed on this forum has finally died
It crashed whilst installing iOS 5.1
It will not restart , the battery is showing critical low level despite 24hrs of charging
Can any body help ? I have tried holding both buttons several times, it starts then shuts down after showing the low battery symbol, despite being on its proper power mains supply
Does not respond at all when connected to iTunes.

I had the same problem and was ready to throw It in the trash. Last night I erased my iPad and set it up as new iPad instead of restoring. I didn't turn on iCloud until after I deleted my iCloud backup and turned off contact syncing with it. Since then it hasn't crashed and it has had about 4 hours of use. 5.0.1 didn't have an effect on it. Just happy I got my iPad back!

My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?

My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?

We'll need to know more to beable to help. Do you want to try to restore your photos from your iPhone to your Mac, or try to recover the photos from the old iPhoto Library on your Mac?
What is the situation of your Mac now? In hat way did it crash? A hardware problem with the drive? Does the system not start properly? Does iPhoto not launch? Do you still have the iPhoto Library on your mac or a backup, so we could try to rescue the photos there?
What versions of iPhoto are on your iPhone and your Mac?
however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?
On the iPhone you cannot access the "package contents" - IOS hides the file system from the users. To restore photos from your phone share all iPhoto photos to your Camera Roll, that are not already in the Camera Roll, and then connect the iPhone via USB and import the Camera Roll to iPhoto or Image Capture. Or use any of the other sharing methods described on thos manual page: see: Ways to share photos http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnk7d8f763e
To retrieve photos from a corruptrd iPhoto Library on your Mac we need to know the version number and more about the "crash" you experienced, the state of your mac, the system, the data. Please post back with more details.
-- Léonie

Is anybody else experiencing crashes when installing iTunes for Windows?

Is anybody else experiencing crashes when installing iTunes for Windows?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box (similar to those given above) are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Wine crashes on install

Similar Messages

Maybe you are looking for