Winetricks in x86_64
So I finally got winetricks to work in my x86_64 arch install and I launched it by:
WINEARCH=win32 winetricks
Now I ran into another problem, it gives the error:
wine cmd.exe /c echo '%ProgramFiles%' returned empty string
winecfg:
I simply need to install d3dx9 and a few other things...
thestinger wrote:
infested999 wrote:
skunktrader wrote:
Did you create a new 32bit wine installation? You need to rename or delete your existing ~/.wine (hopefully you don't have anything important installed) and then run
WINEARCH=win32 winecfg
https://wiki.archlinux.org/index.php/Wi … g_WINEARCH
Ahh that clarifies allot! I never had a x64 CPU before so I don't really understand how this works. I can install any 32-bit application I want with this wine install now?
You can run 32-bit programs in a 64-bit wine prefix too, the same way 32-bit programs run on Windows (WoW64). However, winetricks doesn't work with a 64-bit wine prefix yet.
Hmm, does this cause a performance decrease in gaming since DirectX and .NET is only 32-bit?
Similar Messages
-
Problem with Fresh Install of OEL 6.3 x86_64 over old OEL 6.0 x32
Dear Experts,
After selecting packages for fresh installation of OEL 6.3 x86_64 over old OEL 6.0 32-bit, it gives me the following warning
Some of the packages you have selected for install are missing dependencies. You can exit the installation, go back and change your package selections, or continue installing these packages without their dependencies.
Details
lvm2-2.02.83-3.el6.i686 requires lvm2-libs = 2.02.83-3.el6
kernel-uek-2,6,39-200.24.1.el6uek.x86_64 requires kernel-uek-firmware = 2.6.39-200.24.1.el6uek
lvm2-3.02.72-8.el6.i686 requires lvm2-libs = 2.03.72-8.el6
gdb conflicts with elfutilsHow to avoid this warning?
Best Regards
MahmoudHi Dude,
Thank you for your response.
I didn't choose upgrade. I chose Fresh Installation.
Sorry for not giving background about the problem
The OEL 6.0 x32 was installed on a server with 64bit architecture, so the power of the server is not utilized well.
I want to completely replace the OEL 6.0 (32 bit) system with OEL 6.3 (64 bit)
Just I choose the mount point of /root and /boot and leave the all partitions with no formatting to save the old data
The above warning in the first post appears. How to avoid it?
Regards
Mahmoud -
Migrating an SAP 4.7x110 system on W2003 32-bit to a 64-bit host (x86_64)
We want to migrate an SAP 4.7x110 system on Windows Server 2003 32-bit to a 64-bit host (x86_64). Afterwards we want to upgrade the system to ECC 6.0.
According to PAM, 4.7x110 is not supported on Windows 64-bit.
According to note 960769,
"After the migration to the 64-bit hardware, your SAP system may have a status that is not supported by SAP for productive use (see Note 814834). You may need to upgrade to a new SAP release. In this exceptional circumstance, SAP offers support for the duration of the upgrade. Note that SAP does not support a longer, more productive use of such a system for the period after the migration and before the upgrade....
...We generally recommend to use SQL Server 2005 (64-bit) for the productive use on x86_64. However, the 32-bit operation of SQL Server 2000 on Windows x86_64 64-Bit (supported by Microsoft) is also supported by SAP...
...The following table illustrates which OS/DB combination supports each SAP release in the target system.
Source System Target System (Kernel, DB Software) Support Comment
3.1I 3.1I 32-bit, MSSQL 2000 32-bit only for upgrade (a,c)
4.0B 4.0B 32-bit, MSSQL 2000 32-bit only for upgrade (c)
4.5B 4.5B 32-bit, MSSQL 2000 32-bit only for upgrade (c)
4.6C 4.6D 32-bit, MSSQL 2005 64-bit productive (b)
620 640 64-bit, MSSQL 2005 64-bit productive (b)
640 640 64-bit, MSSQL 2005 64-bit productive (b)
700 700 64-bit, MSSQL 2005 64-bit productive (b) "
According to note 814834,
"SAP supports the x86_64 platform on Windows 2003 Server SP1 x64 for kernel 4.6D and kernel 6.40 and higher. ... For product versions based on kernel 6.40 and higher, only 64-bit operation is supported."
According to note 905634, about SQL Server 2005 support (where a mention to R3E 4.7 x110 is missing)
"Supported SAP products based on SAP_BASIS 6.20 and SAP_BASIS 6.40
Product Windows platforms
BW 3.10 x86, IA-64
SCM 4.0 x86, IA-64
EBP/CRM 4.0 x86, IA-64
ECC 5.0 SR1 x86, IA-64, x64
NetWeaver'04 SR1 x86, IA-64, x64
SCM 4.1 x86, IA-64, x64
SRM 4.0 SR1 x86, IA-64, x64
CRM 4.0 SR1 x86, IA-64, x64
R3E 4.7 x200 SR1 x86, IA-64, x64
SolMan 3.2 SR1 x86, IA-64, x64 "
+//////////////////////+//
According to all this information, may I move our 4.7x110 system onto a Windows Server 2003 SP1 64-bit, SQL Server 2005 64-bit, and after that we would upgrade to ECC 6.0?
Thanks !!!
Eva
Edited by: Eva Verdaguer on Jul 25, 2008 12:41 PMSorry, I forgot posting the SAP answer, which is also "Yes":
30.07.2008 - 16:19:00 CET - Respuesta by SAP
Dear Eva,
Yes, you can move to the 64 bit platform with SQL Server 2005 according
to note 960769.
Information in note 905634 means there is no installation DVD for
release 47x110 for SQL Server 2005. So it is not possible to do a fresh
installation of 47x110 except if you follow the workaround of note
899111 (for x64).
Best Regards,
Manuel García Guardiola
SAP Active Global Support - Netweaver Web Application Server
****************************************************************+
Thanks very much for your message, anyway.
Regards !!
Eva -
Problem with installation of Oracle Grid Infrastructure failed on Oracle Linux 6.4 x86_64
Hello!
I try install Oracle Grid Infrastructure 11.2.0.1. OS - OEL 6.4 x86_64
But running script "/u01/app/oracle/product/11.2.0/grid/root.sh" failed:
[root@localhost grid]# /u01/app/oracle/product/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /u01/app/oracle/product/11.2.0/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2013-07-03 01:27:08: Checking for super user privileges
2013-07-03 01:27:08: User has super user privileges
2013-07-03 01:27:08: Parsing the host name
Using configuration parameter file: /u01/app/oracle/product/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'grid', privgrp 'oinstall'..
Operation successful.
CRS-4664: Node localhost successfully pinned.
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start: Inappropriate ioctl for device at /u01/app/oracle/product/11.2.0/grid/crs/install/roothas.pl line 296.
/u01/app/oracle/product/11.2.0/grid/cfgtoollogs/crsconfig/roothas.log:
2013-07-03 01:27:08: The configuration parameter file /u01/app/oracle/product/11.2.0/grid/crs/install/crsconfig_params is valid
2013-07-03 01:27:08: Checking for super user privileges
2013-07-03 01:27:08: User has super user privileges
2013-07-03 01:27:08: ### Printing the configuration values from files:
2013-07-03 01:27:08: /u01/app/oracle/product/11.2.0/grid/crs/install/crsconfig_params
2013-07-03 01:27:08: /u01/app/oracle/product/11.2.0/grid/crs/install/s_crsconfig_defs
2013-07-03 01:27:08: ASM_DISCOVERY_STRING=
2013-07-03 01:27:08: ASM_DISKS=ORCL:ASMDATA01,ORCL:ASMDATA02,ORCL:ASMDATA03,ORCL:ASMDATA04
2013-07-03 01:27:08: ASM_DISK_GROUP=DATA
2013-07-03 01:27:08: ASM_REDUNDANCY=NORMAL
2013-07-03 01:27:08: ASM_SPFILE=
2013-07-03 01:27:08: ASM_UPGRADE=false
2013-07-03 01:27:08: CLSCFG_MISSCOUNT=
2013-07-03 01:27:08: CLUSTER_GUID=
2013-07-03 01:27:08: CLUSTER_NAME=
2013-07-03 01:27:08: CRS_NODEVIPS=
2013-07-03 01:27:08: CRS_STORAGE_OPTION=0
2013-07-03 01:27:08: CSS_LEASEDURATION=400
2013-07-03 01:27:08: DIRPREFIX=
2013-07-03 01:27:08: DISABLE_OPROCD=0
2013-07-03 01:27:08: EMBASEJAR_NAME=oemlt.jar
2013-07-03 01:27:08: EWTJAR_NAME=ewt3.jar
2013-07-03 01:27:08: EXTERNAL_ORACLE_BIN=/opt/oracle/bin
2013-07-03 01:27:08: GNS_ADDR_LIST=
2013-07-03 01:27:08: GNS_ALLOW_NET_LIST=
2013-07-03 01:27:08: GNS_CONF=false
2013-07-03 01:27:08: GNS_DENY_ITF_LIST=
2013-07-03 01:27:08: GNS_DENY_NET_LIST=
2013-07-03 01:27:08: GNS_DOMAIN_LIST=
2013-07-03 01:27:08: GPNPCONFIGDIR=/u01/app/oracle/product/11.2.0/grid
2013-07-03 01:27:08: GPNPGCONFIGDIR=/u01/app/oracle/product/11.2.0/grid
2013-07-03 01:27:08: GPNP_PA=
2013-07-03 01:27:08: HELPJAR_NAME=help4.jar
2013-07-03 01:27:08: HOST_NAME_LIST=
2013-07-03 01:27:08: ID=/etc/init.d
2013-07-03 01:27:08: INIT=/sbin/init
2013-07-03 01:27:08: IT=/etc/inittab
2013-07-03 01:27:08: JEWTJAR_NAME=jewt4.jar
2013-07-03 01:27:08: JLIBDIR=/u01/app/oracle/product/11.2.0/grid/jlib
2013-07-03 01:27:08: JREDIR=/u01/app/oracle/product/11.2.0/grid/jdk/jre/
2013-07-03 01:27:08: LANGUAGE_ID=AMERICAN_AMERICA.AL32UTF8
2013-07-03 01:27:08: MSGFILE=/var/adm/messages
2013-07-03 01:27:08: NETCFGJAR_NAME=netcfg.jar
2013-07-03 01:27:08: NETWORKS=
2013-07-03 01:27:08: NEW_HOST_NAME_LIST=
2013-07-03 01:27:08: NEW_NODEVIPS=
2013-07-03 01:27:08: NEW_NODE_NAME_LIST=
2013-07-03 01:27:08: NEW_PRIVATE_NAME_LIST=
2013-07-03 01:27:08: NODELIST=
2013-07-03 01:27:08: NODE_NAME_LIST=
2013-07-03 01:27:08: OCFS_CONFIG=
2013-07-03 01:27:08: OCRCONFIG=/etc/oracle/ocr.loc
2013-07-03 01:27:08: OCRCONFIGDIR=/etc/oracle
2013-07-03 01:27:08: OCRID=
2013-07-03 01:27:08: OCRLOC=ocr.loc
2013-07-03 01:27:08: OCR_LOCATIONS=
2013-07-03 01:27:08: OLASTGASPDIR=/etc/oracle/lastgasp
2013-07-03 01:27:08: OLRCONFIG=/etc/oracle/olr.loc
2013-07-03 01:27:08: OLRCONFIGDIR=/etc/oracle
2013-07-03 01:27:08: OLRLOC=olr.loc
2013-07-03 01:27:08: OPROCDCHECKDIR=/etc/oracle/oprocd/check
2013-07-03 01:27:08: OPROCDDIR=/etc/oracle/oprocd
2013-07-03 01:27:08: OPROCDFATALDIR=/etc/oracle/oprocd/fatal
2013-07-03 01:27:08: OPROCDSTOPDIR=/etc/oracle/oprocd/stop
2013-07-03 01:27:08: ORACLE_BASE=/u01/app/oracle
2013-07-03 01:27:08: ORACLE_HOME=/u01/app/oracle/product/11.2.0/grid
2013-07-03 01:27:08: ORACLE_OWNER=grid
2013-07-03 01:27:08: ORA_ASM_GROUP=asmadmin
2013-07-03 01:27:08: ORA_DBA_GROUP=oinstall
2013-07-03 01:27:08: PRIVATE_NAME_LIST=
2013-07-03 01:27:08: RCALLDIR=/etc/rc.d/rc0.d /etc/rc.d/rc1.d /etc/rc.d/rc2.d /etc/rc.d/rc3.d /etc/rc.d/rc4.d /etc/rc.d/rc5.d /etc/rc.d/rc6.d
2013-07-03 01:27:08: RCKDIR=/etc/rc.d/rc0.d /etc/rc.d/rc1.d /etc/rc.d/rc2.d /etc/rc.d/rc4.d /etc/rc.d/rc6.d
2013-07-03 01:27:08: RCSDIR=/etc/rc.d/rc3.d /etc/rc.d/rc5.d
2013-07-03 01:27:08: RC_KILL=K19
2013-07-03 01:27:08: RC_KILL_OLD=K96
2013-07-03 01:27:08: RC_START=S96
2013-07-03 01:27:08: SCAN_NAME=
2013-07-03 01:27:08: SCAN_PORT=0
2013-07-03 01:27:08: SCRBASE=/etc/oracle/scls_scr
2013-07-03 01:27:08: SHAREJAR_NAME=share.jar
2013-07-03 01:27:08: SILENT=false
2013-07-03 01:27:08: SO_EXT=so
2013-07-03 01:27:08: SRVCFGLOC=srvConfig.loc
2013-07-03 01:27:08: SRVCONFIG=/var/opt/oracle/srvConfig.loc
2013-07-03 01:27:08: SRVCONFIGDIR=/var/opt/oracle
2013-07-03 01:27:08: VNDR_CLUSTER=false
2013-07-03 01:27:08: VOTING_DISKS=
2013-07-03 01:27:08: ### Printing other configuration values ###
2013-07-03 01:27:08: CLSCFG_EXTRA_PARMS=
2013-07-03 01:27:08: CRSDelete=0
2013-07-03 01:27:08: HAPatch=0
2013-07-03 01:27:08: HAS_GROUP=oinstall
2013-07-03 01:27:08: HAS_USER=grid
2013-07-03 01:27:08: HOST=localhost
2013-07-03 01:27:08: IS_SIHA=1
2013-07-03 01:27:08: OLR_DIRECTORY=/u01/app/oracle/product/11.2.0/grid/cdata/localhost
2013-07-03 01:27:08: OLR_LOCATION=/u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr
2013-07-03 01:27:08: ORA_CRS_HOME=/u01/app/oracle/product/11.2.0/grid
2013-07-03 01:27:08: SUPERUSER=root
2013-07-03 01:27:08: UPGRADE=
2013-07-03 01:27:08: crscfg_trace=1
2013-07-03 01:27:08: crscfg_trace_file=/u01/app/oracle/product/11.2.0/grid/cfgtoollogs/crsconfig/roothas.log
2013-07-03 01:27:08: hahome=
2013-07-03 01:27:08: hosts=
2013-07-03 01:27:08: osdfile=/u01/app/oracle/product/11.2.0/grid/crs/install/s_crsconfig_defs
2013-07-03 01:27:08: parameters_valid=1
2013-07-03 01:27:08: paramfile=/u01/app/oracle/product/11.2.0/grid/crs/install/crsconfig_params
2013-07-03 01:27:08: platform_family=unix
2013-07-03 01:27:08: srvctl_trc_suff=0
2013-07-03 01:27:08: user_is_superuser=1
2013-07-03 01:27:08: ### Printing of configuration values complete ###
2013-07-03 01:27:08: Oracle CRS stack is not configured yet
2013-07-03 01:27:08: CRS is not yet configured. Hence, will proceed to configure CRS
2013-07-03 01:27:10: OLR location = /u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr
2013-07-03 01:27:10: Oracle CRS Home = /u01/app/oracle/product/11.2.0/grid
2013-07-03 01:27:10: Validating /etc/oracle/olr.loc file for OLR location /u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr
2013-07-03 01:27:10: /etc/oracle/olr.loc already exists. Backing up /etc/oracle/olr.loc to /etc/oracle/olr.loc.orig
2013-07-03 01:27:10: Opening file OCRCONFIG
2013-07-03 01:27:10: Opening file OCRCONFIG
2013-07-03 01:27:10: create Local Only OCR...
2013-07-03 01:27:10: create Local Only OCR on Linux...
2013-07-03 01:27:10: OCR locations = /u01/app/oracle/product/11.2.0/grid/cdata/localhost/local.ocr
2013-07-03 01:27:10: Validating OCR locations in /etc/oracle/ocr.loc
2013-07-03 01:27:10: Checking for existence of /etc/oracle/ocr.loc
2013-07-03 01:27:10: Backing up /etc/oracle/ocr.loc to /etc/oracle/ocr.loc.orig
2013-07-03 01:27:10: Setting ocr location /u01/app/oracle/product/11.2.0/grid/cdata/localhost/local.ocr
2013-07-03 01:27:10: Creating or upgrading Oracle Local Registry (OLR)
2013-07-03 01:27:10: Running as user grid: /u01/app/oracle/product/11.2.0/grid/bin/ocrconfig -local -upgrade
2013-07-03 01:27:10: Invoking "/u01/app/oracle/product/11.2.0/grid/bin/ocrconfig -local -upgrade" as user "grid"
2013-07-03 01:27:11: OLR successfully created or upgraded
2013-07-03 01:27:11: /u01/app/oracle/product/11.2.0/grid/bin/clscfg -localadd
2013-07-03 01:27:11: Running as user grid: /u01/app/oracle/product/11.2.0/grid/bin/clscfg -localadd
2013-07-03 01:27:11: Invoking "/u01/app/oracle/product/11.2.0/grid/bin/clscfg -localadd" as user "grid"
2013-07-03 01:27:11: Keys created in the OLR successfully
2013-07-03 01:27:12: Creating local-only OCR (/u01/app/oracle/product/11.2.0/grid/bin/crsctl pin css -n localhost) ... succeeded
2013-07-03 01:27:12: Registering ohasd
2013-07-03 01:27:12: init file = /u01/app/oracle/product/11.2.0/grid/crs/init/init.ohasd
2013-07-03 01:27:12: Copying file /u01/app/oracle/product/11.2.0/grid/crs/init/init.ohasd to /etc/init.d directory
2013-07-03 01:27:12: Setting init.ohasd permission in /etc/init.d directory
2013-07-03 01:27:12: init file = /u01/app/oracle/product/11.2.0/grid/crs/init/ohasd
2013-07-03 01:27:12: Copying file /u01/app/oracle/product/11.2.0/grid/crs/init/ohasd to /etc/init.d directory
2013-07-03 01:27:12: Setting ohasd permission in /etc/init.d directory
2013-07-03 01:27:12: Removing "/etc/rc.d/rc3.d/S96ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc3.d/S96ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc3.d/S96ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc3.d/S96ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc5.d/S96ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc5.d/S96ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc5.d/S96ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc5.d/S96ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc0.d/K19ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc0.d/K19ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc0.d/K19ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc0.d/K19ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc1.d/K19ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc1.d/K19ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc1.d/K19ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc1.d/K19ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc2.d/K19ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc2.d/K19ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc2.d/K19ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc2.d/K19ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc4.d/K19ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc4.d/K19ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc4.d/K19ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc4.d/K19ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: Removing "/etc/rc.d/rc6.d/K19ohasd"
2013-07-03 01:27:12: Removing file /etc/rc.d/rc6.d/K19ohasd
2013-07-03 01:27:12: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd
2013-07-03 01:27:12: Failed to remove file:
2013-07-03 01:27:12: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd
2013-07-03 01:27:12: The file ohasd has been successfully linked to the RC directories
2013-07-03 01:27:12: Starting ohasd
2013-07-03 01:27:12: itab entries=
2013-07-03 01:27:18: Created backup /etc/inittab.no_crs
2013-07-03 01:27:18: Appending to /etc/inittab.tmp:
2013-07-03 01:27:18: h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/null
2013-07-03 01:27:18: Done updating /etc/inittab.tmp
2013-07-03 01:27:18: Saved /etc/inittab.crs
2013-07-03 01:27:18: Installed new /etc/inittab
2013-07-03 01:29:18: ohasd failed to start: Inappropriate ioctl for device
2013-07-03 01:29:18: ###### Begin DIE Stack Trace ######
2013-07-03 01:29:18: Package File Line Calling
2013-07-03 01:29:18: --------------- -------------------- ---- ----------
2013-07-03 01:29:18: 1: main roothas.pl 166 crsconfig_lib::dietrap
2013-07-03 01:29:18: 2: main roothas.pl 296 main::__ANON__
2013-07-03 01:29:18: ####### End DIE Stack Trace #######
selinux and firewall is disabled.Hi,
Refer the below metalink note :- OHASD Failed to Start: Inappropriate ioctl for device [ID 1069182.1]
Thanks -
Problem with R3 4.6C Installation on RHEL4 x86_64
Hello Experts,
We currently have the 4.6C system on Solaris (64 Bit) and the plan is to migrate to RHEL4 x86_64. I am trying to do a vanilla install of 4.6C SR2 (4.6D EXT kernel) with Oracle 10.2.0.2 on the Linux box as the first step.
I have gone through notes 946141 and 816145 and adapted the changes mentioned there. The installation has progressed smoothly until the database creation step.
What I've completed so far:
SAP Binaries extracted successfully
Oracle Database Software installed successfully
Oracle 10.2.0.2 Patchset installed successfully
I then continue the installation with R3setup and it creates the database successfully BUT I've noticed that its creating an older version of the tablespace which causes my installation to fail at the ORADBUSR_IND_ORA phase.
I have replaced the oradbusr.sql file from the one in note 573042. I have also confirmed that the DBSIZE.TPL and DDLORA.TPL in the installation directory are copied from the Export CD and have the latest tablespace names.
The last couple of lines from the oradbusr.log are:
. Oracle Version: 10.2.0.2.0
. Parametervalue os_authent_prefix: OPS$
. Schema Id: R3
. Database User (Schema): SAPR3
. SAP R/3 Administrator: OPS$DW1ADM
unable to assign default tablespace to user: SAPR3
begin
ERROR at line 1:
ORA-00959: tablespace 'PSAPUSER1D' does not exist
ORA-06512: at line 90
The tablespaces created in the database so far are:
SQL> select tablespace_name from dba_tablespaces;
TABLESPACE_NAME
SYSTEM
PSAPUNDO
SYSAUX
PSAPTEMP
PSAPR3
PSAPR346C
PSAPR3USR
The last three tablespaces (PSAPR3*) are really old and do not exist in my current environment.
Any ideas on how I could get over this problem? I could create the PSAPUSER1D manually but would prefer not to do it this way.
Thanks,
ChengWe currently have the 4.6C system on Solaris (64 Bit) and the plan is to migrate to RHEL4 x86_64. I am trying to do a vanilla install of 4.6C SR2 (4.6D EXT kernel) with Oracle 10.2.0.2 on the Linux box as the first step.
To do a migration you need to export your source system using R3load and import that exported system (heterogeneous migration). You can´s use backup/restore method due to endianess differences and you need a certified migration consultant on-site to assist you in the migration (http://service.sap.com/osdbmigration).
I have replaced the oradbusr.sql file from the one in note 573042. I have also confirmed that the DBSIZE.TPL and DDLORA.TPL in the installation directory are copied from the Export CD and have the latest tablespace names.
This is really strange - it should use the one you copied to the installation directory. Can you check if it´s using the correct one? Not that R3setup is re-copying it from the installation CD again...
Markus -
Problem when installing Oracle 11g R2 x64 on rhel 5.8 x86_64
Hi All,
I’m trying to install oracle 11g software only to upgrade my database from 10g to 11g and i install all required packages listed in installation prerequisites but the below error appeared
error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile
$tail -15 $ORACLE_HOME/install/make.log
/oradata/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk:52: warning: ignoring old commands for target `nmosudo' make -f /oradata/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk relink_exe EXENAME=nmo make[1]: Entering directory `/oradata/db/tech_st/11.2.0/sysman/lib' /oradata/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk:113: warning: overriding commands for target `nmosudo' /oradata/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk:52: warning: ignoring old commands for target `nmosudo' gcc -o /oradata/db/tech_st/11.2.0/sysman/lib/nmo -L/oradata/db/tech_st/11.2.0/lib/ -L/oradata/db/tech_st/11.2.0/sysman/lib/ `cat /oradata/db/tech_st/11.2.0/lib/sysliblist` -lm `cat /oradata/db/tech_st/11.2.0/lib/sysliblist` -ldl -lm -L/oradata/db/tech_st/11.2.0/lib /oradata/db/tech_st/11.2.0/sysman/lib/s0nmo.o /oradata/db/tech_st/11.2.0/sysman/lib/libnmo.a -lcrypt -ldl `cat /oradata/db/tech_st/11.2.0/lib/sysliblist` -ldl -lm /bin/sh: cat: command not found /bin/sh: cat: command not found /bin/sh: cat: command not found /oradata/db/tech_st/11.2.0/sysman/lib/s0nmo.o: In function `main': s0nmo.c:(.text+0x1b): undefined reference to `__intel_new_proc_init' make[1]: Leaving directory `/oradata/db/tech_st/11.2.0/sysman/lib' collect2: ld returned 1 exit status make[1]: *** [/oradata/db/tech_st/11.2.0/sysman/lib/nmo] Error 1 make: *** [nmo] Error 2 EBS :12.0.4
Please help me in this issue. Thanks in advanceSeems you are trying to Install 32-bit 11g R2 on Linux RHEL 5 (64-bit) server fails with relinking errors - 'Mkldflags ntcontab.o nnfgt.o'
Please check following MOS Notes.
Install/Clone 32-bit 11GR2 Client On Linux x86_64 Fails With Error In Invoking Target 'Mkldflags ntcontab.o nnfgt.o' Of Makefile ins_net_client.mk (Doc ID 1473421.1) -
I have an installation problem with CentOS-4.2-x86_64 on my Compaq computer. I get an error during installation which means I do get the local-disk driver bundled up with the this release of the OS for my Compaq PC. Here is the error message:
An error has occurred; no valid devices were found on which to create new file systems. Please check your hardware for the cause of this problem.
BTW, I don't have this problem when I install Centos4.4 as the drive gets recognized and partitioning gets underway; but I must use Centos4.2 for firewire driver reasons, which Cenots4.4 does not have... so, it's a catch-22 problem...
Any help or suggestions will be greatly appreciated!
VilHi Jer:
I am not sure how to make a driver disk. Where would be my source for drivers, what would the driver be called, and how would I install the driver?
I have all four iso images that I burned into a CD and that's all I have (CentOS 4.2 64 bit).
I know for a fact that because my hardware is brand new and came with a serial hard drive (ATA), and, apparently, VenOS 4.2 supports/has drivers for IDE drives (older drive technology) alone. The question is where to get and incorporate driver for ATA drives
into 4.2 -- Centos 4.4 has the driver, and I must stick to 4.2.
Thx,
Vil -
Installation NetWeaver 7.02 on Linux x86_64 Oracle 11.2. - Problem JLoad
Hi,
i hope this is the right forum.
I'm trying to install a NW7.02 on a Linux x86_64 host.
The installation gets an error while the JLoad:
J2EE_CONFIGENTRY deleted
Importing data into table J2EE_CONFIGENTRY
Rows to insert: 25448
Executing batch. Rows inserted : 3619, lob size : 54419183
Importing table J2EE_CONFIGENTRY : 14% complete (3619 rows)
Executing batch. Rows inserted : 1059, lob size : 56551411
Importing table J2EE_CONFIGENTRY : 18% complete (4678 rows)
Executing batch. Rows inserted : 1538, lob size : 53686144
Importing table J2EE_CONFIGENTRY : 24% complete (6216 rows)
Executing batch. Rows inserted : 723, lob size : 57000744
Importing table J2EE_CONFIGENTRY : 27% complete (6939 rows)
Executing batch. Rows inserted : 2875, lob size : 87695271
Importing table J2EE_CONFIGENTRY : 38% complete (9814 rows)
Executing batch. Rows inserted : 4051, lob size : 52459838
Importing table J2EE_CONFIGENTRY : 54% complete (13865 rows)
Executing batch. Rows inserted : 5000, lob size : 52170089
Importing table J2EE_CONFIGENTRY : 74% complete (18865 rows)
java.io.IOException: Permission denied
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(File.java:1355)
at java.io.File.createTempFile(File.java:1444)
at java.io.File.createTempFile(File.java:1481)
at com.sap.inst.jload.db.BlobFileInputStream.<init>(BitHandler.java:278)
at com.sap.inst.jload.db.BlobHandler.setValue(BitHandler.java:158)
at com.sap.inst.jload.db.DBTable.load(DBTable.java:255)
at com.sap.inst.jload.executor.JobExecutor.dbImport(JobExecutor.java:431)
at com.sap.inst.jload.executor.JobExecutor.executeJob(JobExecutor.java:766)
at com.sap.inst.jload.Jload.main(Jload.java:273)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
An error occured during execution. Please consult SAP note 942766 for first steps on troubleshooting the problem.
ERROR 2011-03-17 16:04:37.664
CJS-30049 <html> <head> </head> <body> Execution of <font face="Monospaced">JLoad</font> tool '/usr/lib64/jvm/java/bin/java -classpath /sapmnt/AJT/tmp/sapinst_instdir/NW702/AS-JAVA/ORA/CENTRAL/install/sharedlib/launcher.jar -showversion -Xmx1024m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload /sapmnt/AJT/tmp/sapinst_instdir/NW702/AS-JAVA/ORA/CENTRAL/install/lib/iaik_jce.jar:/sapmnt/AJT/tmp/sapinst_instdir/NW702/AS-JAVA/ORA/CENTRAL/install/sharedlib:/oracle/client/10x_64/instantclient/ojdbc14.jar -sec AJT,jdbc/pool/AJT,/usr/sap/AJT/SYS/global/security/data/SecStore.properties,/usr/sap/AJT/SYS/global/security/data/SecStore.key -dataDir /sapcd/SAP/NW7.02_Java_Base_Components/DATA_UNITS/JAVA_EXPORT_JDMP -job /sapmnt/AJT/tmp/sapinst_instdir/NW702/AS-JAVA/ORA/CENTRAL/IMPORT.XML -log jload.log' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and '/sapmnt/AJT/tmp/sapinst_instdir/NW702/AS-JAVA/ORA/CENTRAL/jload.java.log' for more information. </body></html>
Strange thing. The Insert works until 74% and suddenly a permission problem...
I checked the note mentioned, i check the other logs, i couldn't find a hint.
Anyone a idea?Hi,
> Importing table J2EE_CONFIGENTRY : 38% complete (9814 rows)
> Executing batch. Rows inserted : 4051, lob size : 52459838
> Importing table J2EE_CONFIGENTRY : 54% complete (13865 rows)
> Executing batch. Rows inserted : 5000, lob size : 52170089
> Importing table J2EE_CONFIGENTRY : 74% complete (18865 rows)
> java.io.IOException: Permission denied
> at java.io.UnixFileSystem.createFileExclusively(Native Method)
> at java.io.File.checkAndCreate(File.java:1355)
> at java.io.File.createTempFile(File.java:1444)
> at java.io.File.createTempFile(File.java:1481)
As per the error log, it is giving permission denied error. Please check installation directory should have 777 permission.
Thanks
Sunny -
Solution Manager on Linux x86_64 installation problem
I try to install Solution Manager 4.0 on Linux X86_64 platform. Unfortunately i receive error "the JDK installed in directory /usr/lib/java does not support the 64 bit data model". And there is no J2SDK for Suse linux x86_64 (or at least i can't find it. Please help!!!
OK. I solved the problem by using IBM Java. Also there is an SUSE version of SUN Java 1.4.2 for 64 bit systems.
-
[SOLVED] Problem with Vuze and Java RE x86_64
Hello all !
First of all, sorry if this issue was posted before, but find no related issue similar to mine.
Using pacman, I successfully installed JRE (version 6u16-1-x86_64) and Vuze (version 4.2.0.8-1, former Azureus), but Vuze doesn't want to start.
Running the Vuze's executable in the gnome-terminal, I notice messages from vuze informing it can't find Java executable ("Java exec not found in PATH, starting auto-search..." AND "OOPS, unable to locate java exec in /usr/java/latest /usr/java /usr/lib/jvm/latest /usr/lib/jvm hierarchy") and therefore cannot start the Vuze UI. I also tried but failed in verify the version of Java with the command "java -version" due to command not found.
What is the best approach to fix this problem with Java 64 bits?
Thanks in advance
Last edited by josephg (2009-09-28 18:55:56)peart wrote:Just log out and back in, most likely. There are scripts in /etc/profile.d/ that need to be run to set up your java environment. They get run automatically when you log in.
Yep, perfect answer - issue solved. Thanks a lot! -
Canon PIXMA MP640 WiFi on Arch Linux x86_64
I have a Canon PIXMA MP640 series multifunctional device connected wirelessly to my home router. On Windows Vista the device works flawlessly, I can print or scan without any problems. Now I decided to configure at least the printer part on my Arch Linux x86_64, which I dual-boot with Vista on the same laptop.
I went through the Wiki entry for CUPS and SAMBA. I did install all the necessary packages, that is:
1) cups (ver. 1.4.6), ghostscript (ver. 9.01), gsfonts (ver. 1.0.7pre44) - for CUPS
2) cnijfilter-mp640 (ver. 3.20) and its dependencies: cnijfilter-common (ver. 3.00), lib32-libcups, lib32-popt - drivers for this particular model
3) samba (ver. 3.5.6) and gamin (ver. 0.1.10) – for SAMBA
Then I added cups and samba to DAEMONS section of the /etc/rc.conf file
DAEMONS=(@syslog-ng !network @netfs @crond hal alsa wicd bluetooth laptop-mode !openntpd @cups @samba)
copied Samba configuration file
cp /etc/samba/smb.conf.default /etc/samba/smb.conf
in which I changed only one entry – name of my workgroup, and then I restarted my system.
In System Settings as root I went to Sharing→Samba and checked if everything seems fine – see print screen below.
http://img854.imageshack.us/img854/300/samba1.png
Then in Printer Configuration I chosed New network printer and I tried to fill all the boxes with information I have about my printer – see below. I also pointed to the specific .ppd file - /usr/share/cups/model/canonmp640.ppd.
http://img5.imageshack.us/img5/6650/samba2.png
The printer name and it's localization I got from my router – see below.
http://img840.imageshack.us/img840/3982/samba3.png
As you all see on print screen No 2 I'm getting “Bad URI – need printer name” error from CUPS. I “googled” about it, but still haven't been able to solve this issue. What am I doing wrong?
Last edited by Zibi1981 (2011-03-07 18:13:31)No hints??? I believe it's related to Samba. I don't know how to configure it properly, so it can find my WiFi printer.
-
2.3.11 and 2.4.13 fail tests on OpenSuse 10.3 x86_64
I am trying to get php and perl API of BDBXML 2.3.11 and 2.4.13 running on OpenSuse 10.3 x86_64
when using --enable-perl the perl tests fail so i tried to run the test suite and compare it against 32bit builds.
2.3.11
after changing dbxml/dist/configure.ac like this:
367c367
< LIBTSO_MODSUFFIX=@MODSUFFIX@
LIBTSO_MODSUFFIX=$MODSUFFIX'make test' in dbxml/build_unix produces a ALL.OUT
using:
grep "^FAIL" -A 1 -B 1 dbxml-2.3.11/dbxml/build_unix/ALL.OUTstill produces lots of output. Since the 32bit version is working I compared the output produced on a 32bit ubuntu 07.10 with 64bit OpenSuse 10.3 which showed that following errors only occured on the 64bit system:
Xml003.3.1c: Put/get on both DB's
FAIL:10:16:44 (00:00:00) dbxml_dump/dbxml_load(3.3.1.dbxml:unexpected hexadecimal value ' '
load 3.3.1.dbxml-dumpload: Error: Invalid argument): expected 0, got 1
FAIL:10:16:44 (00:00:00) Dump/load of 3.3.1.dbxml failed.
8.8: Query timeout
FAIL: should not have gotten here
FAIL:10:17:04 (00:00:00) 8.8.8 returned error value 1
FAIL:10:17:04 (00:00:00) 8.8.8: expected "1", got "0"
8.8: Container not found
12.4.1: update with duplicate index entries
FAIL:10:21:41 (00:00:00) dbxml_dump/dbxml_load(12.4.1.dbxml:unexpected hexadecimal value ' '
load 12.4.1.dbxml-dumpload: Error: Invalid argument): expected 0, got 1
FAIL:10:21:41 (00:00:00) Dump/load of 12.4.1.dbxml failed.there are more errors but they are not unique to the 64bit system. The shown messages repeat for different test settings(wholedoc/node - storage ...)
the errors occurring in 3.3.1c and 12.4.1 can also be reproduced using dbxml,dbxml_dump and dbxml_load:
./dbxml -h /tmp
dbxml>createcon test.dbxml
dbxml>putdoc phone1 '<phone/>'
dbxml>quit
./dbxml_dump -h /tmp/ -f /tmp/dbxml_2.3.11_test.dbxml.dump test.dbxml
./dbxml_load -h /tmp/ -f /tmp/dbxml_2.3.11_test.dbxml.dump test2.dbxml
2.4.13
The documentation states that the test should be run from within the tclsh, but I think make test should be supported too. (make test only works after adapting pathes to new location in dbxml/test/tcl/)
similar procedure as above shows that the bug responsible for failing 3.3.1c and 12.4.1 is fixed
and 8.8.8 still fails.
Having a look at 8.8.8 my assumption is that the test fails simply because the machine is too fast (2.13Ghz Core2Duo) and executes the test query before the set timeout is triggered.
Now back to perl:
2.3.11 tests fail with:
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, '../blib/lib', '../blib/arch')" t/XmlManager.t
t/XmlManager....ok 43/89BDB XML: unexpected hexadecimal value ' '
failed
Error: Invalid argument in t/XmlManager.t, line 350
# Looks like you planned 89 tests but only ran 51.
t/XmlManager....dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 52-89
Failed 38/89 tests, 57.30% okay
Failed Test Stat Wstat Total Fail Failed List of Failed
t/XmlManager.t 255 65280 89 76 85.39% 52-89
Failed 1/1 test scripts, 0.00% okay. 38/89 subtests failed, 57.30% okay.after wrapping the call to loadContainer in test 51 in eval {} catch{}
the output looks like this (no further failures)
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, '../blib/lib', '../blib/arch')" t/XmlManager.t
t/XmlManager....ok 1/89BDB XML: unexpected hexadecimal value ' '
failed with std exception:Error: Invalid argument in t/XmlManager.t, line 350
# Failed test 'dump and load failed'
# in t/XmlManager.t at line 363.
t/XmlManager....ok 53/89# Looks like you failed 1 test of 89.
t/XmlManager....dubious
Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 52
Failed 1/89 tests, 98.88% okay
Failed Test Stat Wstat Total Fail Failed List of Failed
t/XmlManager.t 1 256 89 1 1.12% 52
Failed 1/1 test scripts, 0.00% okay. 1/89 subtests failed, 98.88% okay.luckily this is the only test that fails:
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
Failed Test Stat Wstat Total Fail Failed List of Failed
t/XmlManager.t 1 256 89 1 1.12% 522.4.13 tests fail with:
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
Failed Test Stat Wstat Total Fail Failed List of Failed
t/XmlManager.t 1 256 89 1 1.12% 43
t/XmlQueryContext.t 255 65280 33 62 187.88% 3-33
t/XmlValue.t 1 256 248 1 0.40% 245
looking at XmlManager test shows that it is not the same as above but something else
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, '../blib/lib', '../blib/arch')" t/XmlManager.t
t/XmlManager....ok 32/89
# Failed test 'getIndexNodes'
# in t/XmlManager.t at line 275.
t/XmlManager....ok 52/89# Looks like you failed 1 test of 89.
t/XmlManager....dubious
Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 43
Failed 1/89 tests, 98.88% okay
Failed Test Stat Wstat Total Fail Failed List of Failed
t/XmlManager.t 1 256 89 1 1.12% 43
Failed 1/1 test scripts, 0.00% okay. 1/89 subtests failed, 98.88% okay.The other two tests seem to fail because the tests are not correct, but i haven't had the time to look at them yet. Here is the output:
t/XmlQueryContext..........ok 1/33Bareword "XmlQueryContext::DeadValues" not allowed while "strict subs" in use at t/XmlQueryContext.t line 194, <DATA> line 225.
Bareword "XmlQueryContext::DeadValues" not allowed while "strict subs" in use at t/XmlQueryContext.t line 195, <DATA> line 225.
Execution of t/XmlQueryContext.t aborted due to compilation errors.
# Looks like you planned 33 tests but only ran 2.
# Looks like your test died just after 2.
t/XmlQueryContext..........dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 3-33
Failed 31/33 tests, 6.06% okay
t/XmlValue.................ok 1/248
# Failed test 'getLocalName'
# in t/XmlValue.t at line 410.
# got: ''
# expected: '#document'
t/XmlValue.................NOK 245# Looks like you failed 1 test of 248.
t/XmlValue.................dubious
Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 245
Failed 1/248 tests, 99.60% okaySo my questions are:
1. can and will the fix for dump/load be back ported to 2.3.11
2. is my assumption about 8.8.8 correct
3. is there a patch underway for perl on 2.4.13?
4. were there other issues in 2.3.11 that have been fixed in 2.4.13 but not back ported. especially regarding perl and php APIs on 64bit platforms.
I noticed that at least the patch provided in: PHP / BDB XML works fine on Red Hat Fedora 5, not on SuSE 10.2/Athlon 64 by djimenez was not incorporated into 2.3.11 (2.4.13 seems to be fixed)
5. since there seems to be no publicly available php test suite yet, will there be one in the near future?
all comments welcome,
thanks
Gordonfor anyone interested this is a patch for 2.3.11 that backports 64bit php fixes from 2.4.13. It also contains some other changes:
-additional php possibly wrong usage of long instead of int on 64 bit in db-4.5.20
-perl see: Re: perl script segfaults on putDocument
-dbxml tcl test: configure.ac LIBTSO_MODSUFFIX and setting the default tcl test to "run_all" instead of "run_xml"
Please note: The code looks a bit strange because the [ i ] access into an array is interpreted by the forum software and converted to <i>. So you cannot directly copy the patch from browser but need to copy the raw html and modify it (e.g. pass it through sed).
you'll need the <pre> </pre> part from this post and exchange <i> for [ i ] (without spaces) and <br> for '\n'. Maybe it will work. :-)
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/db-4.5.20/php_db4/db4.cpp dbxml-2.3.11-64/db-4.5.20/php_db4/db4.cpp
--- dbxml-2.3.11.orig/db-4.5.20/php_db4/db4.cpp 2006-09-16 03:20:58.000000000 +0200
+++ dbxml-2.3.11-64/db-4.5.20/php_db4/db4.cpp 2008-05-30 18:35:43.000000000 +0200
@@ -1203,7 +1203,7 @@
DB_TXN *dbtxn = NULL;
zval *dbtxn_obj = NULL;
char file = NULL, database = NULL;
- long filelen = 0, databaselen = 0;
+ int filelen = 0, databaselen = 0;
DBTYPE type = DB_BTREE;
u_int32_t flags = DB_CREATE;
int mode = 0;
@@ -2015,7 +2015,7 @@
DbEnv *dbe;
zval *self;
char *home;
- long homelen;
+ int homelen;
u_int32_t flags = 0;
self = getThis();
getDbEnvFromThis(dbenv);
@@ -2035,7 +2035,7 @@
DB_ENV *dbenv;
zval *self;
char *dir;
- long dirlen;
+ int dirlen;
self = getThis();
getDbEnvFromThis(dbenv);
if(zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "s", &dir, &dirlen) == FAILURE)
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/dist/configure.ac dbxml-2.3.11-64/dbxml/dist/configure.ac
--- dbxml-2.3.11.orig/dbxml/dist/configure.ac 2007-01-19 16:52:44.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/dist/configure.ac 2008-06-02 18:30:41.000000000 +0200
@@ -364,7 +364,7 @@
LIBJSO_LN_INSTALL="test -f \$(libjso_base)-\$(SOVERSION).dylib && \$(ln) -f -s \$(libjso_base)-\$(SOVERSION).dylib \$(libjso_base)-\$(SOVERSION).jnilib";;
LIBTSO_MODULE="-module"
- LIBTSO_MODSUFFIX=@MODSUFFIX@
+ LIBTSO_MODSUFFIX=$MODSUFFIX
LIBJSO_LN_BUILD=""
LIBJSO_LN_INSTALL="";;
esac
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/dbxml/db_rdbt.c dbxml-2.3.11-64/dbxml/src/dbxml/db_rdbt.c
--- dbxml-2.3.11.orig/dbxml/src/dbxml/db_rdbt.c 2008-04-16 17:46:53.000000000 +0200
+++ dbxml-2.3.11-64/dbxml/src/dbxml/db_rdbt.c 2008-06-04 18:01:55.000000000 +0200
@@ -206,7 +206,7 @@
break;
buf[linelen++] = '\0';
} else
- linelen = strlen(buf) + 1;
+ linelen = (int) strlen(buf) + 1;
start += linelen;
if (name != NULL) {
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/dbxml/DbWrapper.cpp dbxml-2.3.11-64/dbxml/src/dbxml/DbWrapper.cpp
--- dbxml-2.3.11.orig/dbxml/src/dbxml/DbWrapper.cpp 2008-04-16 17:46:53.000000000 +0200
+++ dbxml-2.3.11-64/dbxml/src/dbxml/DbWrapper.cpp 2008-06-04 20:33:18.000000000 +0200
@@ -219,7 +219,7 @@
int version, ret, t_ret;
DBTYPE dbtype;
char *subdb;
- u_int32_t read_flags;
+ u_int32_t read_flags, tflags;
Dbt key, data;
db_recno_t recno, datarecno;
DB_ENV *dbenv = environment_ ? environment_->get_DB_ENV() : 0;
@@ -252,11 +252,14 @@
db_.err(ENOMEM, NULL);
goto err;
+
+ // work around gcc optimizer issue that seems to modify
+ // read_flags (4.1.1 on 64-bit linux)
+ tflags = read_flags;
/* Get each key/data pair and add them to the database. */
for (recno = 1;; ++recno) {
if ((ret = __db_rdbt(dbenv, key.get_DBT(), data.get_DBT(),
- read_flags, read_callback, in, lineno)) != 0) {
+ tflags, read_callback, in, lineno)) != 0) {
if (ret == EOF)
ret = 0;
break;
@@ -267,7 +270,7 @@
break;
case DB_KEYEXIST:
db_.errx("line %d: key already exists, not loaded:", *lineno);
- dbenv->prdbt(key.get_DBT(), read_flags & DB_READ_PRINTABLE,
+ dbenv->prdbt(key.get_DBT(), tflags & DB_READ_PRINTABLE,
0, &std::cerr, pr_callback, 0);
break;
default:
@@ -602,9 +605,9 @@
// but if incrementing the last byte results in a carry
// (value overflows and goes back to zero), then we have
// to increment the last-but-one byte - and so on.
- char maxPtr = (char )dbt.get_data();
+ unsigned char maxPtr = (unsigned char )dbt.get_data();
u_int32_t maxSize = dbt.get_size();
- char *pos = maxPtr + maxSize;
+ unsigned char *pos = maxPtr + maxSize;
for(--pos; pos >= maxPtr; --pos) {
++(*pos);
if(*pos != 0) break;
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/perl/DbXml/DbXml.xs dbxml-2.3.11-64/dbxml/src/perl/DbXml/DbXml.xs
--- dbxml-2.3.11.orig/dbxml/src/perl/DbXml/DbXml.xs 2006-11-22 23:56:13.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/perl/DbXml/DbXml.xs 2008-06-06 17:35:46.000000000 +0200
@@ -1313,20 +1313,20 @@
else if (sv_derived_from(contents, "XmlInputStream"))
XmlInputStream *s = GetObjPointer(contents, XmlInputStream);
+ ClearObjPointer(contents);
if (txn)
RETVAL = THIS->putDocument(*txn, name, s, *context, flags);
else
RETVAL = THIS->putDocument(name, s, *context, flags);
- ClearObjPointer(contents);
else if (sv_derived_from(contents, "XmlEventReader"))
XmlEventReader *s = GetObjPointer(contents, XmlEventReader);
+ ClearObjPointer(contents);
if (txn)
RETVAL = THIS->putDocument(*txn, name, s, context, flags);
else
RETVAL = THIS->putDocument(name, s, context, flags);
- ClearObjPointer(contents);
else
croak("putDocument parameter 2 should be an XmlInputStream, XmlEventReader or a string");
@@ -1560,7 +1560,7 @@
INIT:
MY_TRY
CLEANUP:
- ClearObjPointer(ST(1));
+ ClearObjPointer(ST(1));
MY_CATCH
string
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/perl/DbXml/t/XmlManager.t dbxml-2.3.11-64/dbxml/src/perl/DbXml/t/XmlManager.t
--- dbxml-2.3.11.orig/dbxml/src/perl/DbXml/t/XmlManager.t 2006-11-22 17:02:31.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/perl/DbXml/t/XmlManager.t 2008-06-06 17:31:39.000000000 +0200
@@ -346,14 +346,28 @@
ok -e "$tmp_dir/cont", "dumped content exists";
my $new_container_name = "$tmp_dir/new";
+ eval {
$mgr->loadContainer($new_container_name, "$tmp_dir/cont");
+
my $c1 = $mgr->openContainer($new_container_name);
my $doc = $c1->getDocument('x') ;
+
my $cont = $doc->getContent();
+
is $cont, $content, "getContent ok" ;
+ };
+ if (my $e = catch std::exception)
+ {
+ warn "failed with std exception:" . $e->what() . "\n";
+ ok 0, "dump and load failed with std::exception"
+ }
+ elsif ($@)
+ {
+ warn "failed\n";
+ warn $@ . "\n";
+ ok 0, "dump and load failed"
+ }
unlink "$tmp_dir/cont";
if (my $e = catch std::exception)
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_container.cpp dbxml-2.3.11-64/dbxml/src/php/php_dbxml_container.cpp
--- dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_container.cpp 2006-10-30 18:46:02.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/php/php_dbxml_container.cpp 2008-06-04 13:35:09.000000000 +0200
@@ -36,7 +36,7 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
std::string buffer = This.getName();
- RETURN_STRINGL((char *)buffer.data(), buffer.length(), 1);
+ DBXML_RETURN_STRINGL((char *)buffer.data(), buffer.length(), 1);
PHP_DBXML_METHOD_END()
@@ -97,7 +97,7 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
zval zctx = NULL, ztxn = NULL;
char uri, name, *index;
- long urilen, namelen, indexlen;
+ int urilen, namelen, indexlen;
if(SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "sss|O",
&uri, &urilen, &name, &namelen, &index, &indexlen,
&zctx, php_dbxml_XmlUpdateContext_ce)) {
@@ -125,7 +125,7 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
zval zctx = NULL, ztxn = NULL;
char uri, name, *index;
- long urilen, namelen, indexlen;
+ int urilen, namelen, indexlen;
if(SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "sss|O",
&uri, &urilen, &name, &namelen, &index, &indexlen,
&zctx, php_dbxml_XmlUpdateContext_ce)) {
@@ -153,7 +153,7 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
zval zctx = NULL, ztxn = NULL;
char uri, name, *index;
- long urilen, namelen, indexlen;
+ int urilen, namelen, indexlen;
if(SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "sss|O",
&uri, &urilen, &name, &namelen, &index, &indexlen,
&zctx, php_dbxml_XmlUpdateContext_ce)) {
@@ -180,8 +180,8 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
zval zctx = NULL, ztxn = NULL;
- char uri, name, *index;
- long urilen, namelen, indexlen;
+ char *index;
+ int indexlen;
if(SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "s|O",
&index, &indexlen,
&zctx, php_dbxml_XmlUpdateContext_ce)) {
@@ -208,8 +208,8 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
zval zctx = NULL, ztxn = NULL;
- char uri, name, *index;
- long urilen, namelen, indexlen;
+ char *index;
+ int indexlen;
if(SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "s|O",
&index, &indexlen,
&zctx, php_dbxml_XmlUpdateContext_ce)) {
@@ -236,8 +236,8 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
zval zctx = NULL, ztxn = NULL;
- char uri, name, *index;
- long urilen, namelen, indexlen;
+ char *index;
+ int indexlen;
if(SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "s|O",
&index, &indexlen,
&zctx, php_dbxml_XmlUpdateContext_ce)) {
@@ -270,7 +270,7 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
zval *ztxn = NULL;
char *name;
- long namelen;
+ int namelen;
long flags = 0;
if(SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "s|l",
&name, &namelen, &flags)) {
@@ -299,7 +299,7 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
zval *ztxn = NULL;
char *handle;
- long handleLen;
+ int handleLen;
long flags = 0;
if(SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "s|l",
&handle, &handleLen, &flags)) {
@@ -325,7 +325,8 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
zval ztxn = NULL, zdoc = NULL, zstream = NULL, zctx = NULL;
char name, contents;
- long namelen, contentslen, flags = 0;
+ int namelen, contentslen;
+ long flags = 0;
/* XmlDocument */
if(SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "O|Ol",
&zdoc, php_dbxml_XmlDocument_ce,
@@ -389,8 +390,7 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
zval ztxn = NULL, zdoc = NULL, zstream = NULL, zctx = NULL;
- char name, contents;
- long namelen, contentslen, flags = 0;
+ long flags = 0;
/* XmlDocument */
if(SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "O|Ol",
&zdoc, php_dbxml_XmlDocument_ce,
@@ -421,7 +421,7 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
zval ztxn = NULL, zdoc = NULL, *zctx = NULL;
char *name;
- long namelen, contentslen;
+ int namelen;
if(SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "O|O",
&zdoc, php_dbxml_XmlDocument_ce,
&zctx, php_dbxml_XmlUpdateContext_ce)) {
@@ -462,8 +462,6 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
zval ztxn = NULL, zdoc = NULL, *zctx = NULL;
- char *name;
- long namelen, contentslen;
if(SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "O|O",
&zdoc, php_dbxml_XmlDocument_ce,
&zctx, php_dbxml_XmlUpdateContext_ce)) {
@@ -489,9 +487,9 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
zval ztxn = NULL, zctx = NULL, *zvl = NULL;
char uri, name, *index;
- long urilen, namelen, indexlen;
- char puri, pname, *pindex;
- long purilen, pnamelen, pindexlen;
+ int urilen, namelen, indexlen;
+ char puri, pname;
+ int purilen, pnamelen;
long flags = 0;
if(SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "Osss|Ol",
&zctx, php_dbxml_XmlQueryContext_ce,
@@ -582,9 +580,9 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
zval ztxn = NULL, zctx = NULL, *zvl = NULL;
char uri, name, *index;
- long urilen, namelen, indexlen;
- char puri, pname, *pindex;
- long purilen, pnamelen, pindexlen;
+ int urilen, namelen, indexlen;
+ char puri, pname;
+ int purilen, pnamelen;
if(SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "sss|O",
&uri, &urilen, &name, &namelen, &index, &indexlen,
&zvl, php_dbxml_XmlValue_ce))
@@ -660,7 +658,7 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
char *name;
- long namelen;
+ int namelen;
if(FAILURE == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "s", &name, &namelen)) {
return;
@@ -672,7 +670,7 @@
PHP_DBXML_STUFFED_THIS(XmlContainer);
char *name;
- long namelen;
+ int namelen;
if(FAILURE == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "s", &name, &namelen)) {
return;
@@ -712,9 +710,9 @@
if(ztxn) {
XmlTransaction txn = php_dbxml_get_XmlTransaction_object_pointer(ztxn TSRMLS_CC);
- RETURN_LONG(This.getNumDocuments(txn));
+ DBXML_RETURN_LONG(This.getNumDocuments(txn));
} else {
- RETURN_LONG(This.getNumDocuments());
+ DBXML_RETURN_LONG(This.getNumDocuments());
PHP_DBXML_METHOD_END()
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/php/php_dbxml.cpp dbxml-2.3.11-64/dbxml/src/php/php_dbxml.cpp
--- dbxml-2.3.11.orig/dbxml/src/php/php_dbxml.cpp 2006-11-22 17:45:05.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/php/php_dbxml.cpp 2008-06-04 14:52:22.000000000 +0200
@@ -50,7 +50,7 @@
return;
- RETVAL_STRING((char*)dbxml_version(&M, &m, &p), 1);
+ RETVAL_STRING((char*)dbxml_version(&M, &m, &p), (int)1);
if (ZEND_NUM_ARGS()) {
convert_to_long(maj);
@@ -70,7 +70,7 @@
return;
- DbXml::setLogLevel((DbXml::LogLevel)level, on);
+ DbXml::setLogLevel((DbXml::LogLevel)level, (on != 0));
static PHP_FUNCTION(dbxml_set_log_category)
@@ -81,7 +81,7 @@
return;
- DbXml::setLogCategory((DbXml::LogCategory)level, on);
+ DbXml::setLogCategory((DbXml::LogCategory)level, (on != 0));
function_entry dbxml_functions[] = {
@@ -96,7 +96,7 @@
zend_class_entry ce;
#ifdef PHP_DBXML_EXCEPTIONS
- php_dbxml_init_exceptions();
+ php_dbxml_init_exceptions(TSRMLS_C);
#endif
PHP_DBXML_REGISTER_CLASS(XmlData, php_dbxml_XmlData_dtor);
PHP_DBXML_REGISTER_CLASS(XmlValue, php_dbxml_XmlValue_dtor);
@@ -108,6 +108,7 @@
PHP_DBXML_REGISTER_CLASS(XmlEventReader, php_dbxml_XmlEventReader_dtor);
PHP_DBXML_REGISTER_CLASS(XmlEventReaderToWriter, php_dbxml_XmlEventReaderToWriter_dtor);
PHP_DBXML_REGISTER_CLASS(XmlEventWriter, php_dbxml_XmlEventWriter_dtor);
+ PHP_DBXML_REGISTER_CLASS(XmlIndexLookup, php_dbxml_XmlIndexLookup_dtor);
PHP_DBXML_REGISTER_CLASS(XmlIndexSpecification, php_dbxml_XmlIndexSpecification_dtor);
PHP_DBXML_REGISTER_CLASS(XmlModify, php_dbxml_XmlModify_dtor);
PHP_DBXML_REGISTER_CLASS(XmlQueryContext, php_dbxml_XmlQueryContext_dtor);
@@ -141,9 +142,14 @@
REGISTER_LONG_CONSTANT( "DBXML_ENCRYPT", DBXML_ENCRYPT, CONST_CS | CONST_PERSISTENT);
REGISTER_LONG_CONSTANT( "DBXML_GEN_NAME", DBXML_GEN_NAME, CONST_CS | CONST_PERSISTENT);
REGISTER_LONG_CONSTANT( "DBXML_LAZY_DOCS", DBXML_LAZY_DOCS, CONST_CS | CONST_PERSISTENT);
+ //REGISTER_LONG_CONSTANT( "DBXML_DOCUMENT_PROJECTION", DBXML_DOCUMENT_PROJECTION, CONST_CS | CONST_PERSISTENT);
+ //REGISTER_LONG_CONSTANT( "DBXML_NO_AUTO_COMMIT", DBXML_NO_AUTO_COMMIT, CONST_CS | CONST_PERSISTENT);
REGISTER_LONG_CONSTANT( "DBXML_CACHE_DOCUMENTS", DBXML_CACHE_DOCUMENTS, CONST_CS | CONST_PERSISTENT);
REGISTER_LONG_CONSTANT( "DBXML_NO_INDEX_NODES", DBXML_NO_INDEX_NODES, CONST_CS | CONST_PERSISTENT);
REGISTER_LONG_CONSTANT( "DBXML_INDEX_NODES", DBXML_INDEX_NODES, CONST_CS | CONST_PERSISTENT);
+ //REGISTER_LONG_CONSTANT( "DBXML_NO_STATISTICS", DBXML_NO_STATISTICS, CONST_CS | CONST_PERSISTENT);
+ //REGISTER_LONG_CONSTANT( "DBXML_STATISTICS", DBXML_STATISTICS, CONST_CS | CONST_PERSISTENT);
+ REGISTER_LONG_CONSTANT( "DBXML_WELL_FORMED_ONLY", DBXML_WELL_FORMED_ONLY, CONST_CS | CONST_PERSISTENT);
REGISTER_LONG_CONSTANT( "LEVEL_NONE", LEVEL_NONE, CONST_CS | CONST_PERSISTENT);
REGISTER_LONG_CONSTANT( "LEVEL_DEBUG", LEVEL_DEBUG, CONST_CS | CONST_PERSISTENT);
REGISTER_LONG_CONSTANT( "LEVEL_INFO", LEVEL_INFO, CONST_CS | CONST_PERSISTENT);
@@ -237,6 +243,8 @@
REGISTER_LONG_CONSTANT("XmlException_NULL_POINTER", XmlException::NULL_POINTER, CONST_CS | CONST_PERSISTENT);
REGISTER_LONG_CONSTANT("XmlException_INDEXER_PARSER_ERROR", XmlException::INDEXER_PARSER_ERROR, CONST_CS | CONST_PERSISTENT);
REGISTER_LONG_CONSTANT("XmlException_DATABASE_ERROR", XmlException::DATABASE_ERROR, CONST_CS | CONST_PERSISTENT);
+ //REGISTER_LONG_CONSTANT("XmlException_QUERY_PARSER_ERROR", XmlException::QUERY_PARSER_ERROR, CONST_CS | CONST_PERSISTENT);
+ //REGISTER_LONG_CONSTANT("XmlException_QUERY_EVALUATION_ERROR", XmlException::QUERY_EVALUATION_ERROR, CONST_CS | CONST_PERSISTENT);
REGISTER_LONG_CONSTANT("XmlException_XPATH_PARSER_ERROR", XmlException::XPATH_PARSER_ERROR, CONST_CS | CONST_PERSISTENT);
REGISTER_LONG_CONSTANT("XmlException_DOM_PARSER_ERROR", XmlException::DOM_PARSER_ERROR, CONST_CS | CONST_PERSISTENT);
REGISTER_LONG_CONSTANT("XmlException_XPATH_EVALUATION_ERROR", XmlException::XPATH_EVALUATION_ERROR, CONST_CS | CONST_PERSISTENT);
@@ -302,6 +310,9 @@
#if COMPILE_DL_DBXML
+#ifdef PHP_WIN32
+#include "zend_arg_defs.c"
+#endif
BEGIN_EXTERN_C()
ZEND_GET_MODULE(dbxml)
END_EXTERN_C()
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_data.cpp dbxml-2.3.11-64/dbxml/src/php/php_dbxml_data.cpp
--- dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_data.cpp 2006-10-30 18:46:02.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/php/php_dbxml_data.cpp 2008-06-04 14:58:27.000000000 +0200
@@ -39,7 +39,7 @@
WRONG_PARAM_COUNT;
- RETURN_STRINGL((char*)This.get_data(), This.get_size(), 1);
+ DBXML_RETURN_STRINGL((char*)This.get_data(), This.get_size(), 1);
} PHP_DBXML_METHOD_END()
PHP_DBXML_METHOD_BEGIN(XmlData, set_data)
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_document.cpp dbxml-2.3.11-64/dbxml/src/php/php_dbxml_document.cpp
--- dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_document.cpp 2006-10-30 18:46:02.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/php/php_dbxml_document.cpp 2008-06-04 15:00:30.000000000 +0200
@@ -32,24 +32,6 @@
RETURN_BOOL(This == other);
} PHP_DBXML_METHOD_END()
-PHP_DBXML_METHOD_BEGIN(XmlDocument, getName)
- PHP_DBXML_STUFFED_THIS(XmlDocument);
- std::string buffer = This.getName();
- RETURN_STRINGL((char *)buffer.data(), buffer.length(), 1);
-} PHP_DBXML_METHOD_END()
-PHP_DBXML_METHOD_BEGIN(XmlDocument, setName)
- PHP_DBXML_STUFFED_THIS(XmlDocument);
- char *name;
- long namelen;
- if(FAILURE == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "s", &name, &namelen)) {
- return;
- This.setName(std::string(name, namelen));
-} PHP_DBXML_METHOD_END()
PHP_DBXML_METHOD_BEGIN(XmlDocument, getContent)
PHP_DBXML_STUFFED_THIS(XmlDocument);
@@ -62,7 +44,7 @@
PHP_DBXML_STUFFED_THIS(XmlDocument);
std::string buffer;
This.getContent(buffer);
- RETURN_STRINGL((char *)buffer.data(), buffer.length(), 1);
+ DBXML_RETURN_STRINGL((char *)buffer.data(), buffer.length(), 1);
} PHP_DBXML_METHOD_END()
PHP_DBXML_METHOD_BEGIN(XmlDocument, getContentAsEventReader)
@@ -77,7 +59,7 @@
PHP_DBXML_STUFFED_THIS(XmlDocument);
zval *zv = NULL;
if (SUCCESS == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "O", &zv, php_dbxml_XmlEventWriter_ce)) {
- XmlEventWriter &writer = php_dbxml_get_XmlEventWriter_object_pointer(zv TSRMLS_DC);
+ XmlEventWriter &writer = php_dbxml_get_XmlEventWriter_object_ref(zv TSRMLS_CC);
This.getContentAsEventWriter(writer);
} PHP_DBXML_METHOD_END()
@@ -87,7 +69,7 @@
PHP_DBXML_STUFFED_THIS(XmlDocument);
zval zstr = NULL, zdat = NULL;
char *content;
- long contentlen;
+ int contentlen;
if(SUCCESS == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "s", &content, &contentlen)) {
This.setContent(std::string(content, contentlen));
@@ -100,7 +82,7 @@
This.setContentAsXmlInputStream(str);
else if(SUCCESS == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "O", &zstr, php_dbxml_XmlEventReader_ce)) {
- XmlEventReader &reader = php_dbxml_get_XmlEventReader_object_pointer(zstr TSRMLS_DC);
+ XmlEventReader &reader = php_dbxml_get_XmlEventReader_object_ref(zstr TSRMLS_CC);
This.setContentAsEventReader(reader);
else {
@@ -123,7 +105,7 @@
PHP_DBXML_STUFFED_THIS(XmlDocument);
zval zvl = NULL, zdat = NULL;
char uri, name;
- long urilen, namelen;
+ int urilen, namelen;
if(SUCCESS == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "ss",
&uri, &urilen, &name, &namelen)) {
XmlValue vl;
@@ -140,7 +122,7 @@
PHP_DBXML_STUFFED_THIS(XmlDocument);
zval zvl = NULL, zdat = NULL;
char uri, name;
- long urilen, namelen;
+ int urilen, namelen;
if(SUCCESS == zend_parse_parameters(
ZEND_NUM_ARGS() TSRMLS_CC, "ssO",
&uri, &urilen, &name, &namelen,&zvl, php_dbxml_XmlValue_ce)) {
@@ -150,11 +132,11 @@
} PHP_DBXML_METHOD_END()
+PHP_DBXML_STRING_GETTER_AND_SETTER(XmlDocument, Name);
+
function_entry php_dbxml_XmlDocument_methods[] = {
PHP_ME(XmlDocument, XmlDocument, NULL, 0)
-PHP_ME(XmlDocument, getName, NULL, 0)
PHP_ME(XmlDocument, equals, NULL, 0)
-PHP_ME(XmlDocument, setName, NULL, 0)
PHP_ME(XmlDocument, getContent, NULL, 0)
PHP_ME(XmlDocument, getContentAsString, NULL, 0)
PHP_ME(XmlDocument, getContentAsEventReader, NULL, 0)
@@ -163,6 +145,7 @@
PHP_ME(XmlDocument, fetchAllData, NULL, 0)
PHP_ME(XmlDocument, getMetaData, NULL, 0)
PHP_ME(XmlDocument, setMetaData, NULL, 0)
+PHP_DBXML_ME_GETTER_AND_SETTER(XmlDocument, Name)
{NULL, NULL, NULL}
/* vim: set sts=2 ts=2 expandtab ai bs=2 : */
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_eventreader.cpp dbxml-2.3.11-64/dbxml/src/php/php_dbxml_eventreader.cpp
--- dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_eventreader.cpp 2006-11-15 17:53:11.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/php/php_dbxml_eventreader.cpp 2008-06-04 15:01:44.000000000 +0200
@@ -59,15 +59,15 @@
PHP_DBXML_STUFFED_REF(XmlEventReader);
int len;
const unsigned char *val = This.getValue(len);
- RETURN_STRINGL((char *)val, len, 1);
+ DBXML_RETURN_STRINGL((char *)val, len, 1);
} PHP_DBXML_METHOD_END()
PHP_DBXML_METHOD_BEGIN(XmlEventReader, getValueLen)
PHP_DBXML_STUFFED_REF(XmlEventReader);
- int len;
+ int len;
(void) This.getValue(len);
- RETURN_LONG(len);
+ DBXML_RETURN_LONG(len);
} PHP_DBXML_METHOD_END()
PHP_DBXML_METHOD_BEGIN(XmlEventReader, isAttributeSpecified)
@@ -86,7 +86,7 @@
if (FAILURE == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "l", &index)) {
RETURN_FALSE;
- RETURN_STRING((char *)This.getAttributeLocalName(index), 1);
+ DBXML_RETURN_STRING((char *)This.getAttributeLocalName(index), 1);
} PHP_DBXML_METHOD_END()
PHP_DBXML_METHOD_BEGIN(XmlEventReader, getAttributeNamespaceURI)
@@ -96,7 +96,7 @@
if (FAILURE == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "l", &index)) {
RETURN_FALSE;
- RETURN_STRING((char *)This.getAttributeNamespaceURI(index), 1);
+ DBXML_RETURN_STRING((char *)This.getAttributeNamespaceURI(index), 1);
} PHP_DBXML_METHOD_END()
PHP_DBXML_METHOD_BEGIN(XmlEventReader, getAttributePrefix)
@@ -106,7 +106,7 @@
if (FAILURE == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "l", &index)) {
RETURN_FALSE;
- RETURN_STRING((char *)This.getAttributePrefix(index), 1);
+ DBXML_RETURN_STRING((char *)This.getAttributePrefix(index), 1);
} PHP_DBXML_METHOD_END()
PHP_DBXML_METHOD_BEGIN(XmlEventReader, getAttributeValue)
@@ -116,7 +116,7 @@
if (FAILURE == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "l", &index)) {
RETURN_FALSE;
- RETURN_STRING((char *)This.getAttributeValue(index), 1);
+ DBXML_RETURN_STRING((char *)This.getAttributeValue(index), 1);
} PHP_DBXML_METHOD_END()
PHP_DBXML_METHOD_BEGIN(XmlEventReader, needsEntityEscape)
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_eventreadertowriter.cpp dbxml-2.3.11-64/dbxml/src/php/php_dbxml_eventreadertowriter.cpp
--- dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_eventreadertowriter.cpp 2006-10-30 18:46:03.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/php/php_dbxml_eventreadertowriter.cpp 2008-06-03 18:02:40.000000000 +0200
@@ -24,9 +24,9 @@
&wval, php_dbxml_XmlEventWriter_ce,
&ownsReader)) {
XmlEventReader &reader =
- php_dbxml_get_XmlEventReader_object_pointer(rval TSRMLS_DC);
+ php_dbxml_get_XmlEventReader_object_ref(rval TSRMLS_CC);
XmlEventWriter &writer =
- php_dbxml_get_XmlEventWriter_object_pointer(wval TSRMLS_DC);
+ php_dbxml_get_XmlEventWriter_object_ref(wval TSRMLS_CC);
XmlEventReaderToWriter r2w(reader, writer, ownsReader);
php_dbxml_set_XmlEventReaderToWriter_object_factory(
getThis(), r2w TSRMLS_CC);
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_eventwriter.cpp dbxml-2.3.11-64/dbxml/src/php/php_dbxml_eventwriter.cpp
--- dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_eventwriter.cpp 2006-11-15 17:53:11.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/php/php_dbxml_eventwriter.cpp 2008-06-03 18:06:06.000000000 +0200
@@ -29,7 +29,7 @@
PHP_DBXML_STUFFED_REF(XmlEventWriter);
char lname, prefix, uri, value;
- long lLen, pLen, uLen, vLen;
+ int lLen, pLen, uLen, vLen;
bool specified = true; // optional in PHP interface
if (SUCCESS ==
zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "ssss|b",
@@ -46,10 +46,10 @@
PHP_DBXML_METHOD_BEGIN(XmlEventWriter, writeText)
PHP_DBXML_STUFFED_REF(XmlEventWriter);
- long type;
+ int type;
char *text;
- long unused; // length is ignored if passed to PHP's writeText
- long tLen;
+ int unused; // length is ignored if passed to PHP's writeText
+ int tLen;
if (SUCCESS ==
zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "ls|l", &type,
&text, &tLen, &unused))
@@ -61,7 +61,7 @@
PHP_DBXML_STUFFED_REF(XmlEventWriter);
char target, data;
- long tLen, dLen;
+ int tLen, dLen;
if (SUCCESS ==
zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "ss", &target,
&tLen, &data, &dLen))
@@ -73,7 +73,7 @@
PHP_DBXML_STUFFED_REF(XmlEventWriter);
char lname, prefix, *uri;
- long lLen, pLen, uLen, nattrs;
+ int lLen, pLen, uLen, nattrs;
bool empty = false; // default in PHP
if (SUCCESS ==
zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "sssl|b",
@@ -90,7 +90,7 @@
PHP_DBXML_STUFFED_REF(XmlEventWriter);
char lname, prefix, *uri;
- long lLen, pLen, uLen;
+ int lLen, pLen, uLen;
if (SUCCESS ==
zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "sss",
&lname, &lLen, &prefix, &pLen, &uri, &uLen)) {
@@ -104,8 +104,8 @@
PHP_DBXML_STUFFED_REF(XmlEventWriter);
char *text;
- long unused; // length is ignored if passed
- long tLen;
+ int unused; // length is ignored if passed
+ int tLen;
if (SUCCESS ==
zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "s|l",
&text, &tLen, &unused))
@@ -119,7 +119,7 @@
char *version = 0;
char *encoding = 0;
char *standalone = 0;
- long vLen, eLen, sLen;
+ int vLen, eLen, sLen;
if (SUCCESS ==
zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "|sss",
&version, &vLen, &encoding, &eLen,
@@ -140,7 +140,7 @@
PHP_DBXML_STUFFED_REF(XmlEventWriter);
char *name;
- long tLen;
+ int tLen;
bool expandedInfoFollows = true; // default this
if (SUCCESS ==
zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "s|b",
@@ -153,7 +153,7 @@
PHP_DBXML_STUFFED_REF(XmlEventWriter);
char *name;
- long tLen;
+ int tLen;
if (SUCCESS ==
zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "s",
&name, &tLen))
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_exception.cpp dbxml-2.3.11-64/dbxml/src/php/php_dbxml_exception.cpp
--- dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_exception.cpp 2006-11-15 18:21:45.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/php/php_dbxml_exception.cpp 2008-06-04 15:03:30.000000000 +0200
@@ -19,10 +19,14 @@
PHP_DBXML_DECLARE_CLASS(XmlException);
-void php_dbxml_init_exceptions()
+void php_dbxml_init_exceptions(TSRMLS_D)
zend_class_entry ce;
+#if (PHP_MAJOR_VERSION == 5) && (PHP_MINOR_VERSION < 2)
PHP_DBXML_REGISTER_CLASS_WITH_PARENT(XmlException, zend_exception_get_default(), php_dbxml_XmlException_dtor);
+#else
+ PHP_DBXML_REGISTER_CLASS_WITH_PARENT(XmlException, zend_exception_get_default(TSRMLS_C), php_dbxml_XmlException_dtor);
+#endif
zend_declare_property_long(php_dbxml_XmlException_ce, "code",
sizeof("code")-1, 0,
ZEND_ACC_PROTECTED TSRMLS_CC);
@@ -43,7 +47,7 @@
ZEND_ACC_PROTECTED TSRMLS_CC);
-void php_dbxml_throw_exception(const XmlException &xe)
+void php_dbxml_throw_exception(const XmlException &xe TSRMLS_DC)
zval *xml_ex;
MAKE_STD_ZVAL(xml_ex);
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/php/php_dbxml.h dbxml-2.3.11-64/dbxml/src/php/php_dbxml.h
--- dbxml-2.3.11.orig/dbxml/src/php/php_dbxml.h 2006-11-15 17:53:11.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/php/php_dbxml.h 2008-06-04 15:04:22.000000000 +0200
@@ -20,7 +20,6 @@
#ifndef PHP_DBXML_H
#define PHP_DBXML_H
extern zend_module_entry dbxml_module_entry;
#define phpext_dbxml_ptr &dbxml_module_entry
@@ -39,9 +38,7 @@
#endif
#ifdef PHP_DBXML_EXCEPTIONS
-extern "C" {
#include "zend_exceptions.h"
#endif
PHP_MINIT_FUNCTION(dbxml);
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_indexlookup.cpp dbxml-2.3.11-64/dbxml/src/php/php_dbxml_indexlookup.cpp
--- dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_indexlookup.cpp 2006-10-30 18:46:03.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/php/php_dbxml_indexlookup.cpp 2008-06-04 15:08:05.000000000 +0200
@@ -34,7 +34,7 @@
index = This.getIndex();
- RETURN_STRINGL((char*)index.data(), index.length(), 1);
+ DBXML_RETURN_STRINGL((char*)index.data(), index.length(), 1);
} PHP_DBXML_METHOD_END()
@@ -65,7 +65,7 @@
index = This.getNodeURI();
- RETURN_STRINGL((char*)index.data(), index.length(), 1);
+ DBXML_RETURN_STRINGL((char*)index.data(), index.length(), 1);
} PHP_DBXML_METHOD_END()
@@ -81,7 +81,7 @@
index = This.getNodeName();
- RETURN_STRINGL((char*)index.data(), index.length(), 1);
+ DBXML_RETURN_STRINGL((char*)index.data(), index.length(), 1);
} PHP_DBXML_METHOD_END()
@@ -112,7 +112,7 @@
index = This.getParentURI();
- RETURN_STRINGL((char*)index.data(), index.length(), 1);
+ DBXML_RETURN_STRINGL((char*)index.data(), index.length(), 1);
} PHP_DBXML_METHOD_END()
@@ -143,7 +143,7 @@
index = This.getParentName();
- RETURN_STRINGL((char*)index.data(), index.length(), 1);
+ DBXML_RETURN_STRINGL((char*)index.data(), index.length(), 1);
} PHP_DBXML_METHOD_END()
@@ -183,7 +183,7 @@
zval *zv;
long op;
PHP_DBXML_STUFFED_THIS(XmlIndexLookup);
- if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "Ol", &zv, php_dbxml_XmlValue_ce, &op))
+ if (FAILURE == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "Ol", &zv, php_dbxml_XmlValue_ce, &op))
WRONG_PARAM_COUNT;
@@ -228,7 +228,7 @@
zval *zv;
long op;
PHP_DBXML_STUFFED_THIS(XmlIndexLookup);
- if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "Ol", &zv, php_dbxml_XmlValue_ce, &op))
+ if (FAILURE == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "Ol", &zv, php_dbxml_XmlValue_ce, &op))
WRONG_PARAM_COUNT;
@@ -257,9 +257,8 @@
PHP_DBXML_METHOD_BEGIN(XmlIndexLookup, setContainer)
zval *zv;
- long op;
PHP_DBXML_STUFFED_THIS(XmlIndexLookup);
- if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "O", &zv, php_dbxml_XmlContainer_ce))
+ if (FAILURE == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "O", &zv, php_dbxml_XmlContainer_ce))
WRONG_PARAM_COUNT;
@@ -276,19 +275,22 @@
long flags = 0;
PHP_DBXML_STUFFED_THIS(XmlIndexLookup);
+#define SET_PTR(expr) \
+ XmlQueryContext c = php_dbxml_get_XmlQueryContext_object_pointer(zqc TSRMLS_CC); \
+ XmlResults r = expr; \
+ object_init_ex(return_value, php_dbxml_XmlResults_ce); \
+ php_dbxml_set_XmlResults_object_pointer(return_value, r TSRMLS_CC);
+
if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC,
"O|l", &zqc, php_dbxml_XmlQueryContext_ce, &flags)) {
- XmlQueryContext c = php_dbxml_get_XmlQueryContext_object_pointer(zqc TSRMLS_CC);
- XmlResults r = This.execute(c, flags);
+ SET_PTR(This.execute(c, flags));
php_dbxml_set_XmlResults_object_pointer(return_value, r TSRMLS_CC);
} else if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC,
"OO", &zt, php_dbxml_XmlTransaction_ce, &zqc, php_dbxml_XmlQueryContext_ce, &flags)) {
XmlTransaction t = php_dbxml_get_XmlTransaction_object_pointer(zt TSRMLS_CC);
- XmlQueryContext c = php_dbxml_get_XmlQueryContext_object_pointer(zqc TSRMLS_CC);
- XmlResults r = This.execute(t,c,flags);
- php_dbxml_set_XmlResults_object_pointer(return_value, r TSRMLS_CC);
+ SET_PTR(This.execute(t, c, flags));
} else {
WRONG_PARAM_COUNT;
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_indexspecification.cpp dbxml-2.3.11-64/dbxml/src/php/php_dbxml_indexspecification.cpp
--- dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_indexspecification.cpp 2006-10-30 18:46:03.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/php/php_dbxml_indexspecification.cpp 2008-06-04 15:08:49.000000000 +0200
@@ -156,7 +156,7 @@
if (This.find(std::string(uri, uri_len), std::string(name, name_len), index)) {
- RETURN_STRINGL((char*)index.data(), index.length(), 1);
+ DBXML_RETURN_STRINGL((char*)index.data(), index.length(), 1);
} else {
RETURN_FALSE;
@@ -175,7 +175,7 @@
index = This.getDefaultIndex();
- RETURN_STRINGL((char*)index.data(), index.length(), 1);
+ DBXML_RETURN_STRINGL((char*)index.data(), index.length(), 1);
} PHP_DBXML_METHOD_END()
@@ -191,9 +191,9 @@
zval *el;
MAKE_STD_ZVAL(el);
array_init(el);
- add_assoc_stringl(el, "uri", (char *) uri.data(), uri.length(), 1);
- add_assoc_stringl(el, "name", (char *) name.data(), name.length(), 1);
- add_assoc_stringl(el, "index", (char *) index.data(), index.length(), 1);
+ add_assoc_stringl(el, "uri", (char *) uri.data(), (int)uri.length(), (int)1);
+ add_assoc_stringl(el, "name", (char *) name.data(), (int)name.length(), (int)1);
+ add_assoc_stringl(el, "index", (char *) index.data(), (int)index.length(), (int)1);
add_next_index_zval(return_value, el);
return;
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_inputstream.cpp dbxml-2.3.11-64/dbxml/src/php/php_dbxml_inputstream.cpp
--- dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_inputstream.cpp 2006-10-30 18:46:03.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/php/php_dbxml_inputstream.cpp 2008-06-03 18:12:07.000000000 +0200
@@ -37,7 +37,7 @@
Read a number of bytes and return them as a string */
PHP_DBXML_METHOD_BEGIN(XmlInputStream, readBytes)
- long toread;
+ int toread;
PHP_DBXML_GETTHIS(XmlInputStream);
if (FAILURE == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "l", &toread)) {
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_int.hpp dbxml-2.3.11-64/dbxml/src/php/php_dbxml_int.hpp
--- dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_int.hpp 2006-11-15 17:53:11.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/php/php_dbxml_int.hpp 2008-06-04 15:57:38.000000000 +0200
@@ -11,14 +11,21 @@
# include "config.h"
#endif
+// this is here to work around a PHP build issue on Windows
+#include <iostream>
+
extern "C" {
#include "php.h"
#include "php_ini.h"
#include "ext/standard/info.h"
+#ifdef PHP_WIN32
+#include "php_db4.h"
+#else
#include "ext/db4/php_db4.h"
+#endif
+#include "php_dbxml.h"
#include <exception>
-#include "php_dbxml.h"
#include "dbxml/DbXml.hpp"
using namespace DbXml;
@@ -34,7 +41,7 @@
#define PHP_DBXML_METHOD_END() \
} catch(XmlException &xe) { \
- php_dbxml_throw_exception(xe); \
+ php_dbxml_throw_exception(xe TSRMLS_CC); \
catch(std::exception &e) { \
php_error_docref(NULL TSRMLS_CC, E_WARNING, e.what()); \
@@ -53,6 +60,15 @@
#endif
+// encapsulate calls to RETURN_STRINGL macro in PHP
+#define DBXML_RETURN_STRINGL(d, l, s) \
+ RETURN_STRINGL((char*)(d),(int)(l), (s))
+
+#define DBXML_RETURN_STRING(d, s) \
+ RETURN_STRING((char*)(d),(int)(s))
+
+#define DBXML_RETURN_LONG(l) RETURN_LONG((long)(l))
+
static inline void php_dbxml_set_object_pointer(zval object, int type, void ptr TSRMLS_DC)
zval *z;
@@ -120,10 +136,13 @@
zend_list_addref(Z_RESVAL_PP(prop));
-/* fun with those on-the-stack-only style object (XmlContainer) that have their own magic refcounts */
+/*
+ * macros to handle the Xml* objects
+ * "object_pointer" really means object reference (e.g. XmlDocument &)
+ */
#define PHP_DBXML_STUFFED_INSTANCES(class_type) \
- class php_dbxml_stuffed_##class_type { \
+ struct php_dbxml_stuffed_##class_type { \
public: class_type stuffed; \
php_dbxml_stuffed_##class_type(class_type &s): stuffed(s) {} \
@@ -136,7 +155,7 @@
struct php_dbxml_stuffed_##class_type *s = new struct php_dbxml_stuffed_##class_type(instance); \
php_dbxml_set_object_pointer(object, le_##class_type, s TSRMLS_CC); \
- static inline class_type php_dbxml_get_##class_type##_object_pointer(zval *object TSRMLS_DC) { \
+ static inline class_type & php_dbxml_get_##class_type##_object_pointer(zval *object TSRMLS_DC) { \
struct php_dbxml_stuffed_##class_type s = (struct php_dbxml_stuffed_##class_type ) \
php_dbxml_get_object_pointer(object, le_##class_type, php_dbxml_##class_type##_ce, #class_type TSRMLS_CC); \
if (s) { return s->stuffed; } /* does internal addref */ \
@@ -147,12 +166,14 @@
delete s; \
-// this is nearly identical to STUFFED_INSTANCES, above, with the exception
-// that it stores an object reference, not an actual instance, which
-// changes the member variable to a reference, along with the
-// accessor's return value. Everything else is identical.
+/*
+ * this is nearly identical to STUFFED_INSTANCES, above, with the exception
+ * that it stores an object reference, not an actual instance, which
+ * changes the member variable to a reference, along with the
+ * accessor's return value. Everything else is identical.
+ */
#define PHP_DBXML_STUFFED_REFERENCES(class_type) \
- class php_dbxml_stuffed_##class_type { \
+ struct php_dbxml_stuffed_##class_type { \
public: class_type &stuffed; \
php_dbxml_stuffed_##class_type(class_type &s): stuffed(s) {} \
@@ -165,7 +186,7 @@
struct php_dbxml_stuffed_##class_type *s = new struct php_dbxml_stuffed_##class_type(instance); \
php_dbxml_set_object_pointer(object, le_##class_type, s TSRMLS_CC); \
- static inline class_type &php_dbxml_get_##class_type##_object_pointer(zval *object TSRMLS_DC) { \
+ static inline class_type &php_dbxml_get_##class_type##_object_ref(zval *object TSRMLS_DC) { \
struct php_dbxml_stuffed_##class_type s = (struct php_dbxml_stuffed_##class_type ) \
php_dbxml_get_object_pointer(object, le_##class_type, php_dbxml_##class_type##_ce, #class_type TSRMLS_CC); \
if (s) { return s->stuffed; } /* does internal addref */ \
@@ -177,10 +198,10 @@
#define PHP_DBXML_STUFFED_THIS(class_type) \
- class_type This = php_dbxml_get_##class_type##_object_pointer(getThis() TSRMLS_CC);
+ class_type &This = php_dbxml_get_##class_type##_object_pointer(getThis() TSRMLS_CC);
#define PHP_DBXML_STUFFED_REF(class_type) \
- class_type &This = php_dbxml_get_##class_type##_object_pointer(getThis() TSRMLS_CC);
+ class_type &This = php_dbxml_get_##class_type##_object_ref(getThis() TSRMLS_CC);
#define PHP_DBXML_DECLARE_CLASS(class_type) \
int le_##class_type; \
@@ -197,7 +218,7 @@
int i;
for(i = 0; fe.handler; i++) {
fe[i].fname = strdup(fe[i].fname);
- zend_str_tolower(fe[i].fname, strlen(fe[i].fname));
+ zend_str_tolower(fe[i].fname, (unsigned int)strlen(fe[i].fname));
@@ -241,6 +262,27 @@
This->set##propname((proptype)val); \
+#define PHP_DBXML_STRING_GETTER_AND_SETTER(class_type, propname) \
+PHP_METHOD(class_type, get##propname) \
+{ \
+ PHP_DBXML_GETTHIS(class_type); \
+ if (ZEND_NUM_ARGS()) { \
+ WRONG_PARAM_COUNT; \
+ } \
+ std::string str = This->get##propname(); \
+ DBXML_RETURN_STRINGL((char*)str.data(), str.length(), 1); \
+} \
+PHP_METHOD(class_type, set##propname) \
+{ \
+ char *val; \
+ int val_len; \
+ PHP_DBXML_GETTHIS(class_type); \
+ if (FAILURE == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "s", &val, &val_len)) { \
+ RETURN_FALSE; \
+ } \
+ This->set##propname(std::string(val, val_len)); \
+}
+
PHP_DBXML_EXTERN_CLASS(XmlContainer);
PHP_DBXML_EXTERN_CLASS(XmlData);
PHP_DBXML_EXTERN_CLASS(XmlManager);
@@ -261,8 +303,8 @@
PHP_DBXML_EXTERN_CLASS(XmlInputStream);
PHP_DBXML_EXTERN_CLASS(XmlValue);
#ifdef PHP_DBXML_EXCEPTIONS
-extern void php_dbxml_init_exceptions();
-extern void php_dbxml_throw_exception(const XmlException &xe);
+extern void php_dbxml_init_exceptions(TSRMLS_D);
+extern void php_dbxml_throw_exception(const XmlException &xe TSRMLS_DC);
PHP_DBXML_EXTERN_CLASS(XmlException);
PHP_DBXML_STUFFED_INSTANCES(XmlException);
#endif
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_manager.cpp dbxml-2.3.11-64/dbxml/src/php/php_dbxml_manager.cpp
--- dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_manager.cpp 2006-10-30 18:46:04.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/php/php_dbxml_manager.cpp 2008-06-04 15:13:37.000000000 +0200
@@ -8,7 +8,6 @@
#include "php_dbxml_int.hpp"
-#include "ext/db4/php_db4.h"
ZEND_RSRC_DTOR_FUNC(php_dbxml_XmlManager_dtor)
@@ -35,7 +34,7 @@
if (dbenv_obj) {
- dbenv = php_db4_getDbEnvFromObj(dbenv_obj);
+ dbenv = php_db4_getDbEnvFromObj(dbenv_obj TSRMLS_CC);
This = new XmlManager(DbEnv::get_DbEnv(dbenv), (unsigned int)flags);
} else {
This = new XmlManager((unsigned int)flags);
@@ -63,7 +62,7 @@
PHP_DBXML_GETTHIS(XmlManager);
char *name;
- long namelen;
+ int namelen;
int ret = 0;
if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "s", &name, &namelen)) {
ret = This->existsContainer(std::string(name, namelen));
@@ -76,7 +75,8 @@
char *name;
// these must be the same as BDB XML defaults
- long namelen, flags = 0, mode = 0;
+ int namelen;
+ long flags = 0, mode = 0;
XmlContainer::ContainerType type = XmlContainer::NodeContainer;
zval *ztxn = NULL;
PHP_DBXML_GETTHIS(XmlManager);
@@ -108,7 +108,8 @@
PHP_DBXML_METHOD_BEGIN(XmlManager, openContainer)
char *name;
- long namelen, flags = 0, mode = 0;
+ int namelen;
+ long flags = 0, mode = 0;
XmlContainer::ContainerType type = XmlContainer::NodeContainer;
zval *ztxn = NULL;
PHP_DBXML_GETTHIS(XmlManager);
@@ -138,7 +139,7 @@
PHP_DBXML_GETTHIS(XmlManager);
zval *ztxn = NULL;
char *name;
- long namelen;
+ int namelen;
if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "s", &name, &namelen)) {
This->removeContainer(std::string(name, namelen));
} else if(SUCCESS == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "Os", &ztxn, php_dbxml_XmlTransaction_ce, &name, &namelen)) {
@@ -156,7 +157,7 @@
zval *ztxn = NULL;
XmlTransaction *txn = NULL;
char name, newname;
- long namelen, newnamelen;
+ int namelen, newnamelen;
if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "ss", &name, &namelen, &newname, &newnamelen)) {
This->renameContainer(std::string(name, namelen), std::string(newname, newnamelen));
} else if(SUCCESS == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "Os", &ztxn, php_dbxml_XmlTransaction_ce, &name, &namelen, &newname, &newnamelen)) {
@@ -174,7 +175,7 @@
PHP_DBXML_METHOD_BEGIN(XmlManager, createMemBufInputStream)
char buffer, bufID;
- long bufferlen, bufIDlen;
+ int bufferlen, bufIDlen;
PHP_DBXML_GETTHIS(XmlManager);
if (FAILURE == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "ss", &buffer, &bufferlen, &bufID, &bufIDlen)) {
return;
@@ -200,7 +201,7 @@
PHP_DBXML_METHOD_BEGIN(XmlManager, createQueryContext)
PHP_DBXML_GETTHIS(XmlManager);
- long rt = (long) XmlQueryContext::LiveValues, et = (long) XmlQueryContext::Eager;
+ int rt = (int) XmlQueryContext::LiveValues, et = (int) XmlQueryContext::Eager;
if (FAILURE == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "|ll", &rt, &et)) {
return;
@@ -228,8 +229,7 @@
zval *ztxn = NULL;
zval *zctx = NULL;
char *query;
- long querylen;
- XmlQueryContext *context;
+ int querylen;
if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "s|O", &query, &querylen, &zctx, php_dbxml_XmlQueryContext_ce)) {
if(zctx) {
@@ -264,7 +264,8 @@
zval *ztxn = NULL;
zval *zctx = NULL;
char *query;
- long querylen, flags = 0;
+ int querylen;
+ long flags = 0;
if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "s|Ol", &query, &querylen, &zctx, php_dbxml_XmlQueryContext_ce, &flags)) {
if(zctx) {
@@ -346,14 +347,15 @@
return;
XmlContainer cont = php_dbxml_get_XmlContainer_object_pointer(zc TSRMLS_CC);
+ XmlIndexLookup lu;
if(zv == NULL) {
XmlValue value = XmlValue();
- XmlIndexLookup lookup = This->createIndexLookup(cont, std::string(uri, uri_len), std::string(name, name_len), std::string(index, index_len), value, (XmlIndexLookup::Operation) flags);
- php_dbxml_set_XmlIndexLookup_object_factory(return_value, lookup TSRMLS_CC);
+ lu = This->createIndexLookup(cont, std::string(uri, uri_len), std::string(name, name_len), std::string(index, index_len), value, (XmlIndexLookup::Operation) flags);
+ php_dbxml_set_XmlIndexLookup_object_factory(return_value, lu TSRMLS_CC);
} else {
XmlValue value = php_dbxml_get_XmlValue_object_pointer(zv TSRMLS_CC);
- XmlIndexLookup lookup = This->createIndexLookup(cont, std::string(uri, uri_len), std::string(name, name_len), std::string(index, index_len), value, (XmlIndexLookup::Operation) flags);
- php_dbxml_set_XmlIndexLookup_object_factory(return_value, lookup TSRMLS_CC);
+ lu = This->createIndexLookup(cont, std::string(uri, uri_len), std::string(name, name_len), std::string(index, index_len), value, (XmlIndexLookup::Operation) flags);
+ php_dbxml_set_XmlIndexLookup_object_factory(return_value, lu TSRMLS_CC);
PHP_DBXML_ADDREF(getThis());
@@ -383,7 +385,7 @@
zval *zuc = NULL;
char *name;
long flags = 0;
- long namelen;
+ int namelen;
if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "s|Ol", &name, &namelen, &zuc, php_dbxml_XmlUpdateContext_ce, &flags)) {
} else if(SUCCESS == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "Os|Ol", &ztxn, php_dbxml_XmlTransaction_ce, &name, &namelen, &zuc, php_dbxml_XmlUpdateContext_ce, &flags)) {
} else {
@@ -408,7 +410,7 @@
zval *zuc = NULL;
char *name;
long flags = 0;
- long namelen;
+ int namelen;
if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "s|Ol", &name, &namelen, &zuc, php_dbxml_XmlUpdateContext_ce, &flags)) {
} else if(SUCCESS == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "Os|Ol", &ztxn, php_dbxml_XmlTransaction_ce, &name, &namelen, &zuc, php_dbxml_XmlUpdateContext_ce, &flags)) {
} else {
@@ -433,7 +435,7 @@
zval *zuc = NULL;
char *name;
long flags = 0;
- long namelen;
+ int namelen;
if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "s|Ol", &name, &namelen, &zuc, php_dbxml_XmlUpdateContext_ce, &flags)) {
} else if(SUCCESS == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "Os|Ol", &ztxn, php_dbxml_XmlTransaction_ce, &name, &namelen, &zuc, php_dbxml_XmlUpdateContext_ce, &flags)) {
} else {
@@ -454,7 +456,7 @@
PHP_DBXML_GETTHIS(XmlManager);
std::string buffer = This->getHome();
- RETURN_STRINGL((char *)buffer.data(), buffer.length(), 1);
+ DBXML_RETURN_STRINGL((char *)buffer.data(), buffer.length(), 1);
PHP_DBXML_METHOD_END()
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_modify.cpp dbxml-2.3.11-64/dbxml/src/php/php_dbxml_modify.cpp
--- dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_modify.cpp 2006-10-30 18:46:04.000000000 +0100
+++ dbxml-2.3.11-64/dbxml/src/php/php_dbxml_modify.cpp 2008-06-04 15:14:42.000000000 +0200
@@ -29,7 +29,7 @@
zval zexp, zres;
long type;
char name, content;
- long name_len, content_len;
+ int name_len, content_len;
PHP_DBXML_STUFFED_THIS(XmlModify);
if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET,
@@ -66,7 +66,7 @@
zval zexp, zres;
long type;
char name, content;
- long name_len, content_len;
+ int name_len, content_len;
PHP_DBXML_STUFFED_THIS(XmlModify);
if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET,
@@ -103,7 +103,7 @@
zval zexp, zres;
long type, location = -1;
char name, content;
- long name_len, content_len;
+ int name_len, content_len;
PHP_DBXML_STUFFED_THIS(XmlModify);
if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET,
@@ -140,7 +140,7 @@
zval *zexp;
char *content;
- long content_len;
+ int content_len;
PHP_DBXML_STUFFED_THIS(XmlModify);
if (FAILURE == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "Os", &zexp, php_dbxml_XmlQueryExpression_ce,
@@ -159,7 +159,7 @@
zval *zexp;
char *content;
- long content_len;
+ int content_len;
PHP_DBXML_STUFFED_THIS(XmlModify);
if (FAILURE == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "Os", &zexp, php_dbxml_XmlQueryExpression_ce,
@@ -208,8 +208,6 @@
PHP_DBXML_METHOD_BEGIN(XmlModify, execute)
- char *encoding;
- int encoding_len;
zval zv, zqc, zuc, zt;
PHP_DBXML_STUFFED_THIS(XmlModify);
diff -Naur -x '*xerces-c-src*' -x '*build_unix*' -x '*configure' -x '*Builder.pm' -x '*More.pm' -x'*const-c.inc' -x '*setup.py' dbxml-2.3.11.orig/dbxml/src/php/php_dbxml_querycontext.cpp dbxml-2.3.11-64/dbxml/src/php/php_dbxml_querycontext.cpp
--- dbxml-2.3.11.orig/dbxml/ -
Error in invoking target 'install' after extproc32 in x86_64 installation
Hi
I am trying to install patch p4547809 (9.2.0.8) however when it gets to 99% of the installation I get this error:
Error in invoking target 'install' of makefile '/u01/oracle/9ir2db/rdbms/lib/ins_rdbms.mk'
According to the log file the error is as follows:
Linking external procedure agent (/u01/oracle/9ir2db/rdbms/lib/extproc32)
rm -f /u01/oracle/9ir2db/rdbms/lib/extproc32
gcc -m32 -o /u01/oracle/9ir2db/rdbms/lib/extproc32 -L/u01/oracle/9ir2db/rdbms/lib32/ -L/u01/oracle/9ir2db/lib32/ -L/u01/oracle/9ir2db/lib32/stubs/ /u01/oracle/9ir2db/rdbms/lib32/hormc.o /u01/oracle/9ir2db/rdbms/lib32/defopt.o /u01/oracle/9ir2db/rdbms/lib32/homts.o -lagtsh -lpls9 -lplp9 -lclntsh -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 /u01/oracle/9ir2db/lib32/libgeneric9.a `cat /u01/oracle/9ir2db/lib32/sysliblist` -Wl,-rpath,/u01/oracle/9ir2db/lib:/lib:/usr/lib -lm `cat /u01/oracle/9ir2db/lib32/sysliblist` -ldl -lm -lvsn9
/usr/lib/gcc/x86_64-redhat-linux/3.4.6/libgcc_s_32.so: undefined reference to `dl_iterate_phdr@GLIBC_2.2.4'
collect2: ld returned 1 exit status
make[1]: *** [u01/oracle/9ir2db/rdbms/lib/extproc32] Error 1
make[1]: Leaving directory `/u01/oracle/9ir2db/rdbms/lib'
make: *** [extproc32] Error 2
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'install' of makefile '/u01/oracle/9ir2db/rdbms/lib/ins_rdbms.mk'. See '/u01/oracle/oraInventory/logs/installActions2006-12-07_12-11-52PM.log' for details.
Exception Severity: 1
*** Cancel Dialog: ***
User Selected: Stop installation of all products.
Here are some additional details:
rpm -q binutils gcc gcc-c++ glibc gnome-libs libstdc++ libstdc++-devel make \ pdksh sysstat xscreensaver libaio binutils-2.15.92.0.2-21gcc-3.4.6-3
gcc-c++-3.4.6-3
glibc-2.3.4-2.25
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.6-3
libstdc++-devel-3.4.6-3
make-3.80-6.EL4
sysstat-5.0.5-11.rhel4
xscreensaver-4.18-5.rhel4.11
libaio-0.3.105-2
>
I would appreciate any assistance on this. ThanksProblem is the compiler version. You need to use gcc 3.2 instead of 3.4.
-
Webtier Utilities 11.1.1.2 failed to install on Oracle Linux OEL 5.7 x86_64
Hi,
Webtier Utilities 11.1.1.2 failed to install on Oracle Linux OEL 5.7 x86_64 (Linux vilje05 2.6.18-274.3.1.0.1.el5 #1 SMP Wed Sep 7 06:02:50 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux):
[oracle@vilje05 ~]$ cd install/Disk1/
[oracle@vilje05 Disk1]$ ./runInstaller -silent -response /home2/oracle/my_response.txt -invPtrLoc /home2/oracle/orainv.loc
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 5192 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2000 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-10-19_03-27-57PM. Please wait ...[oracle@vilje05 Disk1]$ Lo
g: /home2/oracle/oraInventory/logs/install2011-10-19_03-27-57PM.log
Copyright (c) 1999, 2009, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Expected result: One of enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10
Actual Result: enterprise-5
Check complete. The overall result of this check is: Passed
CertifiedVersions Check: Success.
Checking for binutils-2.17.50.0.6; found binutils-2.17.50.0.6-14.el5-x86_64. Passed
Checking for compat-libstdc++-33-3.2.3-x86_64; found compat-libstdc++-33-3.2.3-61-x86_64. Passed
Checking for compat-libstdc++-33-3.2.3-i386; found compat-libstdc++-33-3.2.3-61-i386. Passed
Checking for elfutils-libelf-0.125; found elfutils-libelf-0.137-3.el5-i386. Passed
Checking for elfutils-libelf-devel-0.125; found elfutils-libelf-devel-0.137-3.el5-x86_64. Passed
Checking for gcc-4.1.1; found gcc-4.1.2-51.el5-x86_64. Passed
Checking for gcc-c++-4.1.1; found gcc-c++-4.1.2-51.el5-x86_64. Passed
Checking for glibc-2.5-12-x86_64; found glibc-2.5-65-x86_64. Passed
Checking for glibc-2.5-12-i686; found glibc-2.5-65-i686. Passed
Checking for glibc-common-2.5; found glibc-common-2.5-65-x86_64. Passed
Checking for glibc-devel-2.5-x86_64; found glibc-devel-2.5-65-x86_64. Passed
Checking for glibc-devel-2.5-12-i386; found glibc-devel-2.5-65-i386. Passed
Checking for libaio-0.3.106-x86_64; found libaio-0.3.106-5-x86_64. Passed
Checking for libaio-0.3.106-i386; found libaio-0.3.106-5-i386. Passed
Checking for libaio-devel-0.3.106; found libaio-devel-0.3.106-5-x86_64. Passed
Checking for libgcc-4.1.1-x86_64; found libgcc-4.1.2-51.el5-x86_64. Passed
Checking for libgcc-4.1.1-i386; found libgcc-4.1.2-51.el5-i386. Passed
Checking for libgcc-4.1.1-i386; found libgcc-4.1.2-51.el5-i386. Passed
Checking for libstdc++-4.1.1-x86_64; found libstdc++-4.1.2-51.el5-x86_64. Passed
Checking for libstdc++-4.1.1-i386; found libstdc++-4.1.2-51.el5-i386. Passed
Checking for libstdc++-devel-4.1.1; found libstdc++-devel-4.1.2-51.el5-x86_64. Passed
Checking for make-3.81; found make-1:3.81-3.el5-x86_64. Passed
Checking for sysstat-7.0.0; found sysstat-7.0.2-11.el5-x86_64. Passed
Check complete. The overall result of this check is: Passed
Packages Check: Success.
Checking for VERSION=2.6.18; found VERSION=2.6.18-274.3.1.0.1.el5. Passed
Checking for hardnofiles=4096; found hardnofiles=16384. Passed
Checking for softnofiles=4096; found softnofiles=16384. Passed
Check complete. The overall result of this check is: Passed
Kernel Check: Success.
Expected result: ATLEAST=2.5-12
Actual Result: 2.5-65
Check complete. The overall result of this check is: Passed
GLIBC Check: Success.
Expected result: 1024MB
Actual Result: 11732MB
Check complete. The overall result of this check is: Passed
TotalMemory Check: Success.
Expected result: LD_ASSUME_KERNEL environment variable should not be set in the environment.
Actual Result: Variable Not set.
Check complete. The overall result of this check is: Passed
Check Env Variable Check: Success.
Verifying data......
Copying Files...
-----------20%----------40%----------60%----------80%--------100%
Applying Oneoff Patch...
[CONFIG] Launching Config Actions....
Started Configuration:Web Tier Configuration
[CONFIG]:Create and Start AS Instance (instance1)
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (instance1)]:Creating Oracle Instance directories...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (instance1)]:Recording OPMN ports reservations...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (instance1)]:Bootstrapping OPMN configuration files...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (instance1)]:Instantiating opmnctl for direct usage...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (instance1)]:Skipping instance registration
[CONFIG] SUCCESS:Create and Start AS Instance (instance1)
[CONFIG]:Create and Start OHS Component (ohs1)
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Creating empty component directories...
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Provisioning OHS files for ohs1
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Copying OHS files from ORACLE_HOME to ORACLE_INSTANCE locations
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Customizing httpd.conf
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Adding component's process control to OPMN...
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs1)]:Skipping ohs1 component registration.
[CONFIG] FAILED:Create and Start OHS Component (ohs1)
Question Received:Failed to Start OHS Component
[CONFIG] [Web Tier Configuration]:Failed to Start OHS Component
[CONFIG] FAILED:Create and Start OHS Component (ohs1)
Configuration:Web Tier Configuration failed
Error while running Configuration.
The installation of Oracle AS Common Toplevel Component, Oracle WebTier and Utilities CD failed.
[oracle@vilje05 Disk1]$
[oracle@vilje05 ~]$ opmnctl stopall
XML parser init: error 54.
opmnctl stopall: error parsing /home2/oracle/bea_default/Oracle_WT1/instances/instance1/config/OPMN/opmn/opmn.xml
===
$ cat my_response.txt
[ENGINE]
#DO NOT CHANGE THIS.
Response File Version=1.0.0.0.0
[GENERIC]
#Set this to true if installation and configuration need to be done, all other required variables need to be provided. Variable "INSTALL AND CONFIGURE LATER TYPE" must be set to false if this is set to true as the variables are mutually exclusive
INSTALL AND CONFIGURE TYPE=true
#Set this to true if only Software only installation need to be done. If this is set to true then variable "INSTALL AND CONFIGURE TYPE" must be set to false, since the variables are mutually exclusive.
INSTALL AND CONFIGURE LATER TYPE=false
#Provide the Oracle Home location. The location has to be the immediate child under the specified Middleware Home location. The Oracle Home directory name may only contain alphanumeric , hyphen (-) , dot (.) and underscore (_) characters, and it must begin with an alphanumeric character. The total length has to be less than or equal to 128 characters. The location has to be an empty directory or a valid SOA Oracle Home.
ORACLE_HOME=/home2/oracle/bea_default/Oracle_WT1
#Provide existing Middleware Home location.
MIDDLEWARE_HOME=/home2/oracle/bea_default
#The name of the Oracle Instance. Instance name must begin with an alphabetic character, may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters and are 4 to 30 characters long.
INSTANCE_HOME=/home2/oracle/bea_default/Oracle_WT1/instances/instance1
#Provide the Oracle Instance location. The Oracle Instance directory name may only contain alphanumeric , hyphen (-) , dot (.) and underscore (_) characters, and it must begin with an alphanumeric character. The total length has to be less than or equal to 128 characters. The location has to be an empty or non existing directory.
INSTANCE_NAME=instance1
#If set to true, installer will auto assign ports
AUTOMATIC_PORT_DETECT=true
#This is required if "AUTOMATIC_PORT_DETECT" variable is set to false, absolute path of a staticports file location need to be provided with values for ports.\nThe template for staticports.ini can be found from Disk1/staget/Response directory of the shiphome.
STATICPORT INI FILE LOCATION=
#Provide the My Oracle Support Username. If you wish to ignore Oracle Configuration Manager configuration provide empty string for user name.
MYORACLESUPPORT_USERNAME=
#Provide the My Oracle Support Password
MYORACLESUPPORT_PASSWORD=<SECURE VALUE>
#Set this to true if you wish to decline the security updates. Setting this to true and providing empty string for My Oracle Support username will ignore the Oracle Configuration Manager configuration
DECLINE_SECURITY_UPDATES=true
#Set this to true if My Oracle Support Password is specified
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
#Provide the Proxy Host
PROXY_HOST=
#Provide the Proxy Port
PROXY_PORT=
#Provide the Proxy Username
PROXY_USER=
#Provide the Proxy Password
PROXY_PWD=<SECURE VALUE>
[SYSTEM]
#Set true to configure Oracle HTTP Server, else skip Oracle HTTP Server configuration
CONFIGURE_OHS=true
#Set true to configure Oracle Web Cache, else skip Oracle Web Cache configuration
CONFIGURE_WEBCACHE=false
#The Oracle HTTP Server (OHS) component name (required only if CONFIGURE_OHS is set to true). OHS component name must begin with an alphabetic character, may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters and are 4 to 30 characters long.
OHS_COMPONENT_NAME=ohs1
[APPLICATIONS]
[RELATIONSHIPS]
#If set to true, the instance and components will be registered with an existing weblogic server
ASSOCIATE_WEBTIER_WITH_DOMAIN=false
==
as you see all checks passed OK, but the whole install failed. What could be wrong? And what is XML parser init: error 54?
Edited by: 892273 on Oct 19, 2011 8:12 AMWhere's the WebLogic Server home???
Else you should attach this to an existing WebLogic domain
kind regards
Michel
Edited by: Michel Schildmeijer on 20-okt-2011 15:57 -
[SOLVED] wine-1.3 xorg-1.8 ati catalyst x86_64 starcraft2 black
My system:
Arch x86_64,Ati radeon hd4850,wine-1.3 or latest git,Catalyst-10.7.
So what i do have are these black areas displayed around game. Happens in every possible graphic tweak and setup with wine.
Appears also in wine version 1.2 and it doesnt have this 1.3 problem which i managed to repair with patch http://bugs.winehq.org/show_bug.cgi?id=23904
Sound also glitches im using currently alsa.
http://yfrog.com/0tcaptureirfp screenshot from the game and bug appearing.
This more of graphic driver bug or wine bug anyone.
Last edited by Dehir (2010-08-11 07:32:15)Yep. Ty. I think that ill post it to the amd/ati linux driver team as an bug then Lets hope it gets fixed on later releases.
Maybe you are looking for
-
How do i connect external hard drive
Was trying to copy mp3 audio book into I tunes library which I think I have on an external drive. I kept getting failures that said could not access drive. I know I could see the drive on my desktop. Itunes would only copy some of the flies (about
-
AMD Athlon 64 3000+ (2 GHz) 768 MB RAM nVidia GeForce 7600 GT (256 MB VRAM) Arch 64 + NV Driver I'm having a pretty major problem with my video card. Since I upgraded to it, almost every distro I've tried has had a problem. Ubuntu seems to handle t
-
Emailing the adobe reader link
we started emails pay stubs and a few employees are not able to open the pdf document. How do i send a link via email so the end user can download adobe reader?
-
ORA-01019 using XE Client OLE Provider, sqlplus works
Hello, we use Oracle Express Edition and the Oracle XE Client software.On the Client (Windows 2000) we are not able to connect via OLE DB in some case. We tested it by placing and test.udl File on the Windows Desktop and configured and tested the Pro
-
Question #1 I have a check box field and two data fields containing only letters no numbers in an Adobe Acrobat Form. I would like to have a java script expression that if the Check box 1 field is checked, the contents of Data Field 1 will be auto