WinRM 0x80338113 error on Windows 2008 R2 using DSC

Not having any problems with using a Windows 2012 R2 clients against a Windows 2012 R2 DSC pull server. But for Windows 2008 R2 clients when running Set-LocalDSCConfigurationManager I'm getting:
The WInRM client sent a request to an HTTP server and got a response saying the requested HTTP URL was not available. HRESULT 0x80338113
Windows Firewall service is turned off and disabled on all systems. winrm e winrm/config/listener returns:
Address = *
Transport = HTTP
Port = 5985
Enabled = true
Listening on: all IP's
The Windows 2008 R2 client can connect to the DSC Pull server svc endpoint over HTTP. Any suggestions? For the 2012 R2 clients we did need to install KB2883200 to get it working, but that rollup does not apply to 2008 R2.

Issue has been resolved by disabling IPv6 on the Windows 2008 R2 client nodes.

Similar Messages

WMI __SystemSecurity class GetSecurityDescriptor method reports error 0x8004101d Unexpected error on Windows 2008 R2 for WMI namespace "\root\cimv2"

WMI __SystemSecurity class GetSecurityDescriptor method reports error 0x8004101d Unexpected error on Windows
2008 R2 for WMI namespace "\root\cimv2"
On Windows 2008 and Windows 2012 R2 GetSecurityDescriptor works fine.
Thanks,
Sandygg
Dev

Hi Anna,
No event getting generated under Application / Security, but following event was reported under Microsoft-Windows-WMI-Activity/Operational
log.
Id = {01EAEC48-F800-0001-5A81-6ADB7E6CD001}; ClientMachine =
sever2008r2; User
= sever2008r2\user;
ClientProcessId = 12580; Component = Unknown; Operation = Start IWbemServices::ExecMethod - root\cimv2 : __SystemSecurity::GetSecurityDescriptor; ResultCode = 0x8004101d; PossibleCause = Unknown
Will let you about WMI Diagnosis tool result.
Thanks,
Sandy
Dev

Error while deploying Windows 2008 R2 using SCCM 2012 R2

I am trying to deploy Window 2008 R2 image (captured from a reference machine) using SCCM 2012 R2. I have integrated MDT 2013 with SCCM 2012 R2 and created an MDT task sequence. During deployment, towards the end of Applying image.wim, it gives me
an error that task sequence failed with the error code 0x80070002. And then the system reboots. After reboot, I am able to login to the Windows Server. It seems to work fine, but there are no applications etc installed. Also the _SMSTS log folder is still
present in the C drive. And in the smsts.log file, i can see errors like failed to copy unattend.xml file. Please help me.

Hi,
Error code 0x80070002, it means the system cannot find file specified.
For more information, please review the link below:
Task Sequence Failed with the Error Code 0x80070002
http://prajwaldesai.com/task-sequence-failed-error-code-0x80070002/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Oracle 10g Installation Error on Windows 2008 server

Hi Experts,
I have tried to install Oracle 10g via "51036975 ORACLE 10.2.0.4 Failsafe Server 3.4.1.5 Windows 2008" as per note no. Note 1303262 - Oracle on Windows Server 2008. Server is 64 bit server.
Oracle service is not getting started and showing as "starting" in services.msc. I cant stop the service. I have taken the restart of the server as well but no luck.
Just before the end of installation of Oracle, one pop up box named isqlplussvc opened up stating as "Failed to start the service, Error:0, the operation completed successfully".
Can you please suggest how to handle this error and start the service?
Regards,
Naresh.

Hi All,
Yes, I started with Failsafe server CD only. After trying installing Oracle couple of times, once the service didnt went into starting mode & it couldnt start as well. Then I started going ahead with SAP installation and later I found that the service got automatically started.
I was under the impression that the service has to be started before going for SAP installation.
Thanks all for your replies.
Regards,
Naresh.

10g BI publisher installation getting error in windows 2008 R2 64bit

HI Friends,
I am trying to install the 10.1.3.4.1. and 10.1.3.4.2 in the windows 2008 R2 64bit server.
At the running the setup.exe file its checking and getting passed in the pre-requites.
And its not opening the installer graphical utility instead of that its showing an error like
"setup.exe has stopped working
windows can check online solution of the problem
close the program"
I have downloaded the software from the following location in the OTN,
http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.html
http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.htmlBI Publisher 10.1.3.4.2 for Windows (32/64 bit) (1 GB)
http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.htmlBI Publisher 10.1.3.4.1 for Windows x86 (765 MB)
Please suggests us to move further..
Awaiting for the reply.
Regards
Kumar

Hi
1. Installed RCU first see the link bleow
http://lamont-consulting.com/index.php/blog/obiee/11g/107-obiee-11g-rcu-install
The RCU will communicate with OBIEE
when you install obiee some information needed regarding the RCU.
2. Installed OBIEE see the link below
http://allaboutobiee.blogspot.com/2012/04/obiee-111160-step-by-step-installation.html
i have 3 machines
1. I have windows server 2008 64bit, Oracle Database 11g installed
2. I have windows server 2003 32 bit, RCU and OBIEE installed
3. I have windows XP SP3 32 bit, OBIEE desktop installed.
i hope the above links will help you.
if you have any queries, get back to me .. .

ORA-12560:TNS:protocol adapter error on windows 2008 server(32 bit) for 10g

Hi Friends,
I am installaing Oracle 10g database on windows 2008 Server(32-bit) and when the Database is getting cretaed and during the database files copying portion it's throwing the error :
ORA-12560: TNS:protocol adapter error
I tried intsllaing 10g software alone and invoked DBCA and again during the database files copying portion it's throwing the same error
what could be the issue?
Regards,
DB

Pl indicate which version of "10g" and which version of Windows 2008 - R1 or R2 ?
HTH
Srini

Mount NAS Share in Windows 2008 R2 using CIFS

Hi All,
We have a requirement to setup NAS file share mounted to Windows 2008 R2 server using CIFS. This share needs to be visible for all users who logged in to the server and should be a permanent share. I have gone through the below link on the steps to connect
NAS share using Windows NFS client.
http://randypaulo.wordpress.com/2012/06/29/nfs-how-to-connect-to-nfs-using-windows-server-2008-r2-without-using-user-mapping-server/
As per the above link we will need to mount the NAS share using a Unix User ID and Group ID. But in our environment its not possible and we have to use Windows Active directory user account and group name. Due to this reason why we want the CIFS to be placed.
So if anyone has got different opinions please share with us. Also please let us know if anyone has got any idea how to do this setup.
Your help will be highly appreciated.
Regards,
Kiran Francis

Hi,
Do you mean that the NFS share is stored on a Windows-Based computer and you want Authenticated users access the NFS share?
Please refer to the article below to use command line to mount NFS share:
Mounting an NFS shared resource to a drive letter
http://technet.microsoft.com/en-us/library/cc754350.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

NI_VISA install errors on Windows 2008 R2

I have installed LabView 2009 SP1 on a relatively modern PC (XeonW3520, 12 GB RAM, Windows Server 2008 R2 Enterprise) computer running some equipment in an optics lab. However, I got a variety of errors during installation of drivers. As I need to communicate with a NI GPIB-Enet/1000, I tried installing the 2.8.0 version of 488.2. However I got 4 errors. Per the install program, I rebooted and tried reinstalling. That did not get rid of the errors. The errors were of the form:
The "NI-DIM 1.11.0f0 for 64 Bit Windows" has failed with the following error:
Error 1722. There is a problem with this Windows Installer package. A program run
as part of the setup did not finish as expected. Contact your support personnel or
package vendor.
I answered yes at the continue prompt. Other errors were with:
NI-MDBG 1.10.0f0
NI-MXDF 1.11.5f1
NI-ORB 1.9.3f0
(all for 64 Bit Windows).
I then figured out that these are part of NI-VISA so I downloaded the most recent version
I could find (5.0.3) and tried to install that. I got the same errors, rebooted and tried again
and got the fun "Please correct the problem and try again" message.
Any hints on how to correct the problem?
I'm logged in as Administrator and on the machine console (remote desktop is configured and licensed as that is part of our site license).
Will these errors prevent LabView from working correctly?
Will they prevent programs compiled with C++/C using IEEE-488 from working correctly?
I have been running a slightly older version of LabView under Windows Server 2008 (32-bit, not R2) and didn't have installation problems. I was using the 32-bit version of Server as some hardware I'm using only had 32-bit support (of both Server 2003 and Server 2008) until recently.
Thanks,
Stuart

I've tried again. Removed all NI software and removed the installation directory. Rebooted and logged in as Administrator (Windows Server 2008 R2 Enterprise). Installed LabView 2009 64-bit from a burned DVD (University site license) with logging enabled. No errors shown on screen. Rebooted. Then installed the default stuff from the Feb 2010 driver DVD using logging. Some errors but now in log. Rebooted. Then installed 2.8 of 488.2 (I have a new GPIB-ENET/1000 which requires 2.8) using logging. Got errors but now in another log. Rebooted. Then installed VISA 5.0.3 with logging. Got errors but now in yet another log. Rebooted ...
I don't know if I need VISA or not. The instrument VIs for some of the instruments connected by GPIB use VISA calls. So I just did the default installs for drivers, 488.2 and then VISA.
I've zipped the four installation logs into one file - still quite large (25 MB). I'll try attaching - no idea if it will work.
Does not work - got error (in pink) - so how should I get them to you?
Stuart

Remotely login error on windows server 2003 using gemalto smart card

I am getting this error when trying to log on windows server 2003 remotely using smartcard. We have our own CA. We are able to successfully logon on windows server 2008 using same card.

Hi,
Base on my research, Event 537 indicates that a logon attempt was made and rejected for some reason other than those covered by explicit audit records in this category.
Would you please provide more details?
Are there any related warnings and errors under Application Logs or System Logs?
By remotely login, do you mean logon via RDP?
Here are some related links below for you references:
Event 537
http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows%20Operating%20System&ProdVer=5.0&EvtID=537&EvtSrc=Security&LCID=1033
Smart Card and Remote Desktop Services
http://technet.microsoft.com/en-us/library/ff404286(v=WS.10).aspx
Please get back to us with the necessary information at your earliest convenience.
Best Regards,
Amy Wang

SAP Sybase ASE 15.7 DB error on Windows 2008 R2 Server

Hello SAP Gurus !
We are in process of Installing SAP ASE 15.7 DB on win 2008 R2 64bit. When i Run setup file on ASE folder and after following the required screen at the last phase it comes out throwing error saying New Adaptive service unable to create?.
We tried all the options but no luck, Can anyone in this group help me out of it, Your early reply really appreciated.
Thanks -
Amjad

Hi Amjad,
Please check whether below components are installed on Windows sever.
Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package and KB2565063
Microsoft Visual Studio 2010 Service Pack 1 and KB2565057
If not please do so and check the results.
Secondly which path level of ASE do you have ?
You may refer some known installation issues on link
SyBooks Online
Hope this helps.
Regards,
Deepak Kori

Oracle RAC 10.2.0.4 installation error in windows 2008 R2

Hi!
below is the error i got;
INFO: Command = C:\Windows\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1)
Execution of the plugin was aborted
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" was canceled.

Hi,
this is not enough information to help you with this problem.
=> Have you checked any necessary prerequisites (Documentation and RAC Starter Kit in support.oracle.com)
=> Do you use OCFS or RAW devices for OCR?
=> Do you use an english Windows version or another language?
=> What is included in the clusterware logs?
etc...
Regards
Sebastian

Winhttp 5.1 error on Windows 2008 R2

Hi,
I have a VB Script that uses WinHttp.WinHttpRequest.5.1, it runs fine on Windows 7x64 and Windows 2003, but dies a horribly on Windows 2008R2.
I tried the STACKOVERFLOW suggestion of re-registering the dll, but that did not work. After many fruitless hours Binging for a solution I am starting to ask around for help.
I suspect that perhaps the installation I have for Windows 2k8R2 is missing a component or feature or role, but I am not intimately familiar with how these things are put together, so some help is greatly appreciated.
Has anyone in the Microsoft camp run into a similar issue with Winhttp 5.1, and are willing to share the resolution.
Thanks in advance.

Hi,
Sorry for the delay reply.
So did you have tried re-registering winhttp using command line regsvr32 %SystemRoot%\System32\WinHttp.dll ?
Did you have only one windows server 2008r2? If try to run the Script on another Server 2008r2, what will happened?
I think you could ask in msdn forums:
https://social.msdn.microsoft.com/Forums/en-US/home
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

11.1.7 on Windows 2008 R2 - Error TNS:protocol adapter error

I am getting the error on Windows 2008 R2 ORA-12560: TNS: protocol adapter error.
Even I applied the patch: 9166858
Installed the software and created the Database with Database Configuration Assistant.
Even I started all the Oracle Services.
Same problem I am getting for 10.2 g also.
Edited by: sk123 on Jan 30, 2010 4:27 PM

I installed the patch
11.1.0.7.0 Patch 22 (11.1.0.7.22P) 32-Bit Patch:9166858 64-Bit (x64) Patch:9166861
It works.

Windows 2008 x64 TS Printing - The data area passed to a system call is too small

Hi,
I have a Windows 2008 TS using Easy Print. The server has two quad core cpu's with 16Gb of ram and is running a light processing accounting program for 80 users. The machine and easy print both work fine until the server reaches about 5Gb of memory in use. Once this happens user's documents stop printing with event id's 6161 The data area passed to a system call is too small being logged. None of the hotfixes seem to be applicable to my scenario as I am not getting the common "Access Denied" error. I have increased received and transmit buffer sizes on both NIC's to the 2048 maximum, and set the Sizreqbuf setting in the registry - to no avail.
Any help appreciated.
Thanks

Hi,
Thanks for the post.
The Event error 6161 is caused by one of the following conditions:
The printer is not reachable on the network
Windows cannot allocate sufficient memory
There was invalid or incomplete data received by the print spooler
A driver upgrade failed
There is a bad printer device driver
For more information, please refer to the following article:
http://technet.microsoft.com/en-us/library/cc773865(WS.10).aspx
In this case, I assume that this issue may be caused by the insufficient memory.
In Event Viewer, examine the event and look for the following text: "Win32 error code returned by the print processor: 8. Not enough storage is available to process this command".
If so, please collect system information for 60 seconds and generate a System Diagnostics Report:
Open an elevated Command Prompt window. (Click Start, point to All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.)
At the command prompt, type perfmon /report and then press ENTER. Reliability and Performance Monitor will start collecting data to create the System Diagnostics Report.
When the report is ready for viewing, locate the Diagnostic Results section of the report, and then check for any warnings (indicated by Warnings in the report). You can follow links to additional help on resolving warnings from this section. In addition, you can expand each category in the Basic System Checks section to see more details about why warnings appear. Also, the Performance section provides process-level details about top consumers of resources. You might need to increase the size of the paging file or add physical memory.
Thanks,
Miles

Operating system version Error in Win 2008

Hi All,
I am trying to install oracle 10g in our Window machine... while i am installing i am getting following error.
OS: WINDOW 2008 R2
Using paramFile: D:\Softwares\Oracle 10G Win-64Bit\102010_win64_x64_database\database\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.1 or 5.2. Actual 6.0
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files (x86)\Oracle\Inventory\logs\installActions2011-02-25_11-30-06AM.log
Please press Enter to exit...Pls guide me how to over come this issue.
Thanks & Regards
Sami.

Hi All,
Thanks for reply..
I have download the version from below link
http://www.oracle.com/technetwork/database/10203vista-087538.htmlwhile i am installing oracle its goes fine..
when i started to create database by running E:\oracle\product\10.2.0\db_1\bin\dbca.bat.
oracle giving error as
ORA-12560: TNS PROTOCOL adapter error.i have reinstalled more than 3 times.. same error again and againn. pls guide me to install oracle 10g
Thanks & Regards
Sami
Edited by: Sami on Feb 25, 2011 5:45 PM

WinRM 0x80338113 error on Windows 2008 R2 using DSC

Similar Messages

Maybe you are looking for