Wireless internet not working at my house when I use my laptop (using a linksys wrt54g2 router)

I am using a laptop for wireless internet (Dell D610). I have no problem using wireless internet at my school and in other places, but at my house, I can’t browse the internet. The router at my house has a strong signal (4 or 5 bars) and when I try to connect to it, it says that I am connected, but when I open up the internet browser, I can’t get online. The router is in a room right next to mine and it is on the same floor. It is a Linksys WRT54G2 router.
When I go to the network connections folder, for the wireless network connection icon, it says “not connected, firewalled.” I can still browse the internet, though (at places other than my house).
Another thing that I want to mention- I can't connect to other routers in the neighborhood either (the ones that aren't secured). It just doesn't connect (but for the router in my house, it connects). But my roommate told me that a bunch of people have connected to this one guy's router.
What is the problem here? What can I do to make the internet work? Why would I be able to access the school's wireless internet and not the one in my house?

Whats the Wireless Settings you have set on your Router, I there might be the possibility that you have set the security mode on your Router too high thats the reason you are not getting connected to your Wireless Network. Follow the setps to change the Wireless settings on your Router and i think this might help in getting you connected to your wireless network.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on the Sub tab, Wireless MAC Filter..
Make sure the Wireless MAC Filter on your Router is Turned Off. 
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

  • The microphone of my iphone is not working on call but when i use viber it is working

    The microphone of my iphone is not working on calls but when i use viber it is working

    Hello there, qasmicomputers.
    The following Knowledge Base article provides some great troubleshooting steps for your issue:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Internet wont work on any computer when I use Apple TV

    Sorry if this is anywhere on this forum, I'm new to it.
    But I just received my Apple Tv yesterday and I was able to set it all up and use it, home sharing was working but the problem was internet on our laptops & ipad & anything else using the wireless would not work.
    Am I doing something wrong?

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • Wireless internet not working on my mac for new network..

    Im visiting my boyfriend and for some reason my macbook wont pick up his wireless network. All other pc computers in the house seem capable apart from mine. I usually use wireless via my airport router at home. Here it's Tiscalli.
    At first it asked me for the WEP password as normal but when I entered the correct password it would say 'connection failed' after trying to connect via that password. (this still sometimes happens)
    Then both the desired network and other local networks kept being recognised and disappearing intermittedly (This is still happening) When on the pc laptop the network wireless signal for all remain constant. Often it would also show local networks but not the desired one for the house.
    Occasionally it would log me on to the desired network without a password required and show varying levels of signal but the actual internet browser wasnt detecting a connection and was unable to load pages. I also tried another browser - same problem. When it does this, in Network system preferences under 'Connected,' it says 'Airport is connected to SpeedTouch266FC2 and has the IP address (then numbers) Prior to that - it said that Airport had a self assigned IP address and may not be able to connect to the internet (or something similar)- that message went away and was replaced with the former after I changed the ip address section as detailed below.
    Now mostly when I click on the network name - SpeedTouch266FC2 = it makes the system preferences window freeze on the lil rainbow wheel and shows 'application is not responding' in the dock so I have to force quit.
    Ive had a scout round the net - someone suggested entering a web address on your browser that dealt with internet settings but didnt require a connection. http://192.168.1.254 amongst other similar addresses that could work. This didnt work - but not in the normal way for the browsers - instead of address not found, itd come up with took too long to respond or connection failure.
    I also tried (as suggested on another forum) changing the TC/IP section settings from 'DHCP' to Manually, entered the suggested numbers from a forum - IPv4 Addres - 192.168.1.110, Subnet Mask - 255.255.255.0, Router - 193.168.1.1, Configure IPv6 - Off. Ive absolutely no idea what all that means but it did nothing.
    The rest of the laptop works normally

    Not quite sure why you posted in the iPod nano forum?
    Maybe the MacBook forums would be better?
    http://discussions.apple.com/category.jspa?categoryID=218
    Or an Airport forum?
    http://discussions.apple.com/category.jspa?categoryID=140

  • Lenovo b570 wireless internet not working after repair

    i had my computer sent out it wouldnt power on they replaced the motherboard bios and ram i think it said, anyways the internet wont connect it keeps saying turn the switch on on the front of the computer well it is on and the logo even pops up on screen showing im turning it on and off. the internet will work if i plug it in wired but not wiredless and when i troubleshoot it says enable wireless but it is enabled! if i go into the adapter setting and i try to click enable it wont connect. it worked fine ebfore i sent it out did they modify this or something?
    Solved!
    Go to Solution.

    i found a solution i clicked fn and f5 together and it let me enable it! i dont know why this option is hidden and unknown like this but now i got it to work

  • Wireless internet not working... I'm so confused :(

    I have wireless internet hooked up at my place (Rogers high speed modem with a Linksys router) and it was working on Saturday afternoon. Come Saturday night, when I turned my Powerbook back on, I connect to my wireless router but when I start up Safari or Camino, I can't connect to the internet at all. Limewire as well can't connect either.
    Here's what I've found out so far:
    1). I can see my wireless network name and it connects automatically when I turn on the Powerbook. All the bars on the Internet connect light up too (full range).
    2). I did a hard reset on my router, reconnected everything again and I can still see my wireless router (it automatically connects still). I even did a hard reset on my modem too.
    3). Checked all cables, connections, unplugged everything too.
    4). All lights on the modem come on, including the activity lights, which still blink normally as per usual. All lights on the router come on too.
    5). I did Repair Permissions as well to see if it would repair something too (didn't work).
    6). Checked the setting in Network as well... everything seems to be the same as before (when it was working).
    I think I have narrowed it down to the modem though... even though the lights are all blinking, when I connect my Powerbook to the modem directly (through Ethernet), it still won't connect to the internet.
    The problem, though, lies in the fact that my modem, while purchased outright from someone, is actually rewired to bypass my local cable company's high speed internet and, therefore, I get it for free. So, unless I can take this modem to another apartment in my building to see if it works, I can't actually get my cable company to help out here.
    Besides all that I mentioned above, is there anything else I should be checking? Anyway I can narrow down my that it's my modem and nothing else?
    Thanks in advance for any help too... much appreciated.
    -Dale

    I for one would not help you. You are stealing a service. And, because of theives like yourself we all pay.

  • Wireless Internet not working correctly

    I have a ibookg4 with an airport extreme wireless card. A while back my wireless stopped working all the sudden. I have a netgear router nothing to special. So i have spent countless of hours on the phone with the iT guys from netgear trying to help me figure out if its the router or what...i have the latest firmware for my router, i have to use my ethernet cable to connect through my router then to my cable modem to get on the internet. Now sometimes i can connect to my network but the speed is slow even though i have full bars. Then it loses its connection. Sometimes my network is on the list with other names and then sometimes there wont be any names on the list at all....and other times i try to connect and an error comes up and says there was and error joining this group with 2 options try again or ok....weird. When i use a program to find networks and i find mine, my signal strength is only 56% max and this is in the same room as the router. So i would like any help on this or any tips on what could be the problem.

    hi old skool.....how did you figure out it was your wireless card? I'm having very similar problems, my mac book pro will recognize the wireless networks and the diagnostics even say i'm connected to the internet but when i open safari it just idles and it never actually opens the webpage.
    I pretty much did the same thing, stayed on the phone with the Belkin people for hours trying to figure this out and i know it's not the modem or the router because everything picks up just fine on the windows laptop i use for work.
    I'd really appreciate your insight! Thanks!

  • Internet not working on Mac computers when streaming on Apple TV...

    Hi Everyone,
    Strange issue...
    Apple TV works great. Internet connection works great. Router connection works great on all devices: MacBook Pro, Mac Mini (wired Ethernet), and Apple TV. Whenever I start streaming content on the Apple TV such as Netflix or iTunes movie rental, the internet stops working on computers. As soon as I back out of the movie on the AppleTV, the internet resumes working on the computer.
    What the? Any ideas?

    Same issue. Using 2011 iMac, time capsule, and Apple TV. Start streaming and the iMac Internet stops. Usually just safari; other wifi still functions, iMessage, email, etc. iPad works fine even when the iMac stops working.
    Any software fixes? Or easy reset in safari to change dns or likewise? Using safari reset doesn't do the trick. Thanks.

  • 10.6.5 and wireless internet not working...

    not sure if this is the same issue as the other topic, but since upgrading to 10.6.5, my wireless connection is totally spotty. it keeps dropping in and out. turning airport off and on fixes it temporarily... please fix.

    Try this:
    * Open ‘System Preferences’
    * Click the ‘Network’ icon
    * At the top ‘Location’ pull-down menu navigate down to ‘Edit Locations’
    * Click on the + sign to add a new Location
    * Name it anything, click OK,
    * Select the “Network Name” (wireless router) then click Apply
    Your wireless should now disconnect from the router (and old location) and reconnect again under this new location. New Location means a fresh start with clean preferences and cache files. Note that you will almost certainly get a new IP address if you’re using DHCP, so if you have any IP dependent network resources don’t be surprised if you have to update those to the new IP address.
    This fix worked when I had a similar problem after updating to 10.6.3 so hopefully it will work for 10.6.5
    You might also like to look at this link:
    http://osxdaily.com/2009/12/22/mac-wireless-problems-guide-to-troubleshooting-ai rport-wireless-problems-on-your-mac/

  • Wireless Internet Not working Please Help

    Hi, I have a X301 and I have attached a wirless dongle on it and it doesnt connect. Ive installed the programs multiple times and it just keeps on crashing... is there anything I can download to make this stop...
    Thanks in Advance
    Jimmy

    Hi james111!
    Give us a bit more to go on here: What's the 7-digit model number of your X301, and what operating system are you using?
    What is the make and model of the dongle, what is the software you are trying to use, and exactly what happens when you try to use it?
    I don't work for Lenovo. I'm a crazy volunteer!

  • Why doesnt mac book pro wireless  internet not work as well as my macbook

    Hello,
    My brother bought a macbook a few months ago, and we are on vacation now. He kept telling me to buy a macbook pro since i liked his so much, so i did. Know that i have it (1 week old) i have not been able to connect to the internet very well at all. If my computar and his are right next to each other, his picks up all of the signals while mine picks up none. Or if his computar is turned off, and im using mine, it connects only sometimes, and if it does, it is not very strong at all.
    Any help???
    thanks

    Interference Robustness can help improve connections and reception in areas with cordless phones, microwave ovens, baby monitors... etc.
    It's just a suggestion. Click the airport icon on the task bar at the top right of your screen. There'll be an option to use Interference Robustness.
    As the previous poster said, the MacBook Pro's aluminium enclosure can mean it get's a weaker signal than the plastic MacBook does.
    Switching Interference Robustness on might help you.

  • Why would links or search bars on the top half of the page not work on any site when i use firefox but work fine in IE?

    links and search bars on the top half of pages dont work and its not that i click them and they dont work but it wont let me click them its like it doesnt see them

    Recently, the Yahoo Toolbar and the Babylon extension have been reported to cause that problem. They seem to overlap invisibly over the top of the web page display. If you have either or both, uninstall or disable them/it, or see if an update is available that solves the problem.
    *See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
    *See --> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
    *See --> http://kb.mozillazine.org/Uninstalling_toolbars
    If that does not solve the problem:
    *See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
    *See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
    *See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • My trackpad was not working correctly and now when i use a mouse it wont work eather.

    I have a Mac Book Pro 13" and for months now my track pad was acting up. When i was watching youtube it would randomly pause and zoom in and other things like that. I am going away and me and my sister have to share it and because her computer is fine and she isn't bring it she will have a very very hard time using it. I used to just ignore it but not it is becoming a big problem and I can't bring it to the apple store because we are leaving tomorrow and have no time at all. I herd it might have something to do with the disk or battery or the trackpad? How do I fix this problem?

    go on system preffrences and trackpad and all the settings their avan in the other taps turn them all on with a tick (just click the box)

  • HT4993 why does my internet not work when not connected to wifi?

    why does my internet not work when not connected to wifi

    Hi farmgirl0812,
    Thanks for using Apple Support Communities.  This article has steps to try if you are unable to connect to a cellular network:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    - Ari

  • Internet not working after turning Airport on

    Hello,
    All of a sudden, I can not connect to the internet when I turn the Airport on. The signal looks strong. But when I open my browser, it gives an error page. On a cafe where there is a free wireless internet that I go to often and had no problems connecting, gave me this message recently.
    IP Configuration
    192.168.1.46 in use by 00:18:39:88:81:fc, DHCP Server 192.168.1.1
    Is there anything that I need to update in my Airport settings? If so, where? I have been trying to look for that and don't seem to have any luck.
    Thanks for any help.
    Rich
    G4   Mac OS X (10.4.8)  

    See your other thread " Internet not working after turning Airport on".

Maybe you are looking for

  • USB ethernet does not work in left USB port

    My USB ethernet adapter does not work in the left USB port on my MacBook Air, but it works in the right side. Other devices, like my mouse, work fine in both ports. Could I have a faulty left-side port with too little power for the ethernet adapter,

  • Scrollpane, ScrollDrag and buttons

    I think I already know the answer to this question but I thought I'd ask just to be sure.  I have a scollpane loaded and I have buttons in the content( a map) thats loaded in the scrollpane.  The buttons work fine until I try to turn on scrolldrag. 

  • Macbook vs. Dell

    Interesting article pitting the MB against the dell latitude regarding which machine runs hotter. MB vs Dell Basically it seems the MB runs just about as hot as the dell does. I think one exhibit shows it 10f hotter then the latitude which isn't that

  • ABAP programming q?

    I am new to this language.  i need to write a routine. I have two infoCubes, both are identical but for 0Calmonth and 0CalDay i need to add and pool daily historic data to monthly bucket when 9amatnr and customer is same. how do i declare this infocu

  • AdvancedDataGrid - how to display this type of data

    I have the following two classes (attached to this message). I think the AdvancedDataGrid can display it properly. Basically there can be EmployeeGroups inside of EmployeeGroups..nested as much as you want. Each group also contains Employees. I'd lik