Wireless internet not working on my mac for new network..

Im visiting my boyfriend and for some reason my macbook wont pick up his wireless network. All other pc computers in the house seem capable apart from mine. I usually use wireless via my airport router at home. Here it's Tiscalli.
At first it asked me for the WEP password as normal but when I entered the correct password it would say 'connection failed' after trying to connect via that password. (this still sometimes happens)
Then both the desired network and other local networks kept being recognised and disappearing intermittedly (This is still happening) When on the pc laptop the network wireless signal for all remain constant. Often it would also show local networks but not the desired one for the house.
Occasionally it would log me on to the desired network without a password required and show varying levels of signal but the actual internet browser wasnt detecting a connection and was unable to load pages. I also tried another browser - same problem. When it does this, in Network system preferences under 'Connected,' it says 'Airport is connected to SpeedTouch266FC2 and has the IP address (then numbers) Prior to that - it said that Airport had a self assigned IP address and may not be able to connect to the internet (or something similar)- that message went away and was replaced with the former after I changed the ip address section as detailed below.
Now mostly when I click on the network name - SpeedTouch266FC2 = it makes the system preferences window freeze on the lil rainbow wheel and shows 'application is not responding' in the dock so I have to force quit.
Ive had a scout round the net - someone suggested entering a web address on your browser that dealt with internet settings but didnt require a connection. http://192.168.1.254 amongst other similar addresses that could work. This didnt work - but not in the normal way for the browsers - instead of address not found, itd come up with took too long to respond or connection failure.
I also tried (as suggested on another forum) changing the TC/IP section settings from 'DHCP' to Manually, entered the suggested numbers from a forum - IPv4 Addres - 192.168.1.110, Subnet Mask - 255.255.255.0, Router - 193.168.1.1, Configure IPv6 - Off. Ive absolutely no idea what all that means but it did nothing.
The rest of the laptop works normally

Not quite sure why you posted in the iPod nano forum?
Maybe the MacBook forums would be better?
http://discussions.apple.com/category.jspa?categoryID=218
Or an Airport forum?
http://discussions.apple.com/category.jspa?categoryID=140

Similar Messages

HT6114 camera is not working in my mac for skype and facetime

camera is nt working in my mac for skype and facetime calls.there is no option for camera also in my mac...

• If Apple's http://support.apple.com/kb/HT2090
   suggestions do not help you, (the "reset" suggested there
   often restores normal function,) continue with the following.
• Use your Mac's Disk Utility to repair permissions and then
   download and apply the latest Combo Update. For your
   Mac OS X (10.7.5), the latest Combo is http://support.apple.com/kb/DL1582
• Repair permissions again immediately following the system restart
   that completes the Combo update.
Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera. For hardware help, contact Apple or an Apple-Authorized Service Provider for service.
(Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)

Wireless internet not working at my house when I use my laptop (using a linksys wrt54g2 router)

I am using a laptop for wireless internet (Dell D610). I have no problem using wireless internet at my school and in other places, but at my house, I can’t browse the internet. The router at my house has a strong signal (4 or 5 bars) and when I try to connect to it, it says that I am connected, but when I open up the internet browser, I can’t get online. The router is in a room right next to mine and it is on the same floor. It is a Linksys WRT54G2 router.
When I go to the network connections folder, for the wireless network connection icon, it says “not connected, firewalled.” I can still browse the internet, though (at places other than my house).
Another thing that I want to mention- I can't connect to other routers in the neighborhood either (the ones that aren't secured). It just doesn't connect (but for the router in my house, it connects). But my roommate told me that a bunch of people have connected to this one guy's router.
What is the problem here? What can I do to make the internet work? Why would I be able to access the school's wireless internet and not the one in my house?

Whats the Wireless Settings you have set on your Router, I there might be the possibility that you have set the security mode on your Router too high thats the reason you are not getting connected to your Wireless Network. Follow the setps to change the Wireless settings on your Router and i think this might help in getting you connected to your wireless network.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on the Sub tab, Wireless MAC Filter..
Make sure the Wireless MAC Filter on your Router is Turned Off.
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Wireless internet not working... I'm so confused :(

I have wireless internet hooked up at my place (Rogers high speed modem with a Linksys router) and it was working on Saturday afternoon. Come Saturday night, when I turned my Powerbook back on, I connect to my wireless router but when I start up Safari or Camino, I can't connect to the internet at all. Limewire as well can't connect either.
Here's what I've found out so far:
1). I can see my wireless network name and it connects automatically when I turn on the Powerbook. All the bars on the Internet connect light up too (full range).
2). I did a hard reset on my router, reconnected everything again and I can still see my wireless router (it automatically connects still). I even did a hard reset on my modem too.
3). Checked all cables, connections, unplugged everything too.
4). All lights on the modem come on, including the activity lights, which still blink normally as per usual. All lights on the router come on too.
5). I did Repair Permissions as well to see if it would repair something too (didn't work).
6). Checked the setting in Network as well... everything seems to be the same as before (when it was working).
I think I have narrowed it down to the modem though... even though the lights are all blinking, when I connect my Powerbook to the modem directly (through Ethernet), it still won't connect to the internet.
The problem, though, lies in the fact that my modem, while purchased outright from someone, is actually rewired to bypass my local cable company's high speed internet and, therefore, I get it for free. So, unless I can take this modem to another apartment in my building to see if it works, I can't actually get my cable company to help out here.
Besides all that I mentioned above, is there anything else I should be checking? Anyway I can narrow down my that it's my modem and nothing else?
Thanks in advance for any help too... much appreciated.
-Dale

I for one would not help you. You are stealing a service. And, because of theives like yourself we all pay.

Lenovo b570 wireless internet not working after repair

i had my computer sent out it wouldnt power on they replaced the motherboard bios and ram i think it said, anyways the internet wont connect it keeps saying turn the switch on on the front of the computer well it is on and the logo even pops up on screen showing im turning it on and off. the internet will work if i plug it in wired but not wiredless and when i troubleshoot it says enable wireless but it is enabled! if i go into the adapter setting and i try to click enable it wont connect. it worked fine ebfore i sent it out did they modify this or something?
Solved!
Go to Solution.

i found a solution i clicked fn and f5 together and it let me enable it! i dont know why this option is hidden and unknown like this but now i got it to work

Software Update Not Working - Stuck at "Checking for New Software"

Hey Everybody,
I have recently been experiencing problems with my Software Update. After I open it, it gets stuck at the screen and times-out after a while asking me to check my network to see if I'm connected to the Internet. My internet is working fine yet the Software Update is still not working. I have tried removing the Software Update pdlist and trying to change the cache.db yet nothing is working. I have run the verify disk and repair disk utility with no result. Anyone got any other ideas other then a clean install?

See if the following fixes the problem:
Fix for Software Update
See Troubleshooting Automatic Software Update in Mac OS X.
Delete the following files:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist
"xxx" is a number.
/Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)
Message was edited by: Kappy

Hp laserjet p1102w: wireless not working: unable to change to new network

I just moved and established a new wireless network to which I want to connect my printer.
I have followed instructions on HP's websites. All goes well until I attempt to open "html config..." on the printer utility screen. nothing happens after selecting "html config...".
printer works fine if connected via usb; doesnt work wirelessly from laptop, iphone or ipad. I would like to continue to use the laserjet wirelessly.
any suggestions are appreciated!

"OK let's try this again. What is the make and model numbers of all you network equipment? How is everything connected? OS of computers? Please explain."
Make & model #:
printer:   hp laserjet p1102w
cable modem:   arris dg860
I am printing from a macbookpro (OS X 10.6.8), iphone 5c and an ipad.
the wireless printing worked just fine from the laptop, my iphone and ipad while at my previous address where I shared a wifi with roommates. I now have my own wifi via cable (tv) that has a different name than the previous wifi.
this printer currently only prints via USB. the wireless printing doesnt work from any device.
messages:
laptop:     printer offline
iphone:   no airprint printers found
ipad:        no airprint printers found

Wireless internet access works on one Mac, but not another

I have a Time Capsule connected via Ethernet to a Linksys ADSL2 gateway.
I have set up a wireless network on the TC, which both Macs (MBP and MB) can see and log on to.
The MacBook can get an internet connection wirelessly, the MBP can't.
The MBP does get an internet connection if connected to the TC via an ethernet cable
I have the connection assistant, but it get as far as asking for my airport password before giving up - I have entered the password correctly.
Any suggestions?
The MBP is running 10.5, the MB 10.4

I have fixed the problem with a reinstall of OS X. Before that, i had tried trashing the keychain, repairing it an also deleting the wireless networks plist. No luck.
Anyway, all OK now...

Why doesnt mac book pro wireless internet not work as well as my macbook

Hello,
My brother bought a macbook a few months ago, and we are on vacation now. He kept telling me to buy a macbook pro since i liked his so much, so i did. Know that i have it (1 week old) i have not been able to connect to the internet very well at all. If my computar and his are right next to each other, his picks up all of the signals while mine picks up none. Or if his computar is turned off, and im using mine, it connects only sometimes, and if it does, it is not very strong at all.
Any help???
thanks

Interference Robustness can help improve connections and reception in areas with cordless phones, microwave ovens, baby monitors... etc.
It's just a suggestion. Click the airport icon on the task bar at the top right of your screen. There'll be an option to use Interference Robustness.
As the previous poster said, the MacBook Pro's aluminium enclosure can mean it get's a weaker signal than the plastic MacBook does.
Switching Interference Robustness on might help you.

Wireless Internet not working correctly

I have a ibookg4 with an airport extreme wireless card. A while back my wireless stopped working all the sudden. I have a netgear router nothing to special. So i have spent countless of hours on the phone with the iT guys from netgear trying to help me figure out if its the router or what...i have the latest firmware for my router, i have to use my ethernet cable to connect through my router then to my cable modem to get on the internet. Now sometimes i can connect to my network but the speed is slow even though i have full bars. Then it loses its connection. Sometimes my network is on the list with other names and then sometimes there wont be any names on the list at all....and other times i try to connect and an error comes up and says there was and error joining this group with 2 options try again or ok....weird. When i use a program to find networks and i find mine, my signal strength is only 56% max and this is in the same room as the router. So i would like any help on this or any tips on what could be the problem.

hi old skool.....how did you figure out it was your wireless card? I'm having very similar problems, my mac book pro will recognize the wireless networks and the diagnostics even say i'm connected to the internet but when i open safari it just idles and it never actually opens the webpage.
I pretty much did the same thing, stayed on the phone with the Belkin people for hours trying to figure this out and i know it's not the modem or the router because everything picks up just fine on the windows laptop i use for work.
I'd really appreciate your insight! Thanks!

10.6.5 and wireless internet not working...

not sure if this is the same issue as the other topic, but since upgrading to 10.6.5, my wireless connection is totally spotty. it keeps dropping in and out. turning airport off and on fixes it temporarily... please fix.

Try this:
* Open ‘System Preferences’
* Click the ‘Network’ icon
* At the top ‘Location’ pull-down menu navigate down to ‘Edit Locations’
* Click on the + sign to add a new Location
* Name it anything, click OK,
* Select the “Network Name” (wireless router) then click Apply
Your wireless should now disconnect from the router (and old location) and reconnect again under this new location. New Location means a fresh start with clean preferences and cache files. Note that you will almost certainly get a new IP address if you’re using DHCP, so if you have any IP dependent network resources don’t be surprised if you have to update those to the new IP address.
This fix worked when I had a similar problem after updating to 10.6.3 so hopefully it will work for 10.6.5
You might also like to look at this link:
http://osxdaily.com/2009/12/22/mac-wireless-problems-guide-to-troubleshooting-ai rport-wireless-problems-on-your-mac/

Wireless Internet Not working Please Help

Hi, I have a X301 and I have attached a wirless dongle on it and it doesnt connect. Ive installed the programs multiple times and it just keeps on crashing... is there anything I can download to make this stop...
Thanks in Advance
Jimmy

Hi james111!
Give us a bit more to go on here: What's the 7-digit model number of your X301, and what operating system are you using?
What is the make and model of the dongle, what is the software you are trying to use, and exactly what happens when you try to use it?
I don't work for Lenovo. I'm a crazy volunteer!

Mail not working when connected to a new network

Whenever I connect to the network at work I can't send mail. I can receive mail though. I can't use my airport at work. Could this be the problem?
Thank You
Tamara

Unless your employer has a wireless router and wireless network, you can't use Airport when at work.
Assuming you have a business email account provided by your employer, you can't send mail with your business email account either when connected to your employer's network and internet access at work?

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!

Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

Safari is not working on the Mac. Internet is fine, mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar.

Safari is not working on the Mac. Internet is fine. mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar only and coloured wheel appears.

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
If extensions aren't causing the problem, see below.
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Wireless internet not working on my mac for new network..

Similar Messages

Maybe you are looking for