Wireless keyboard does not work with Safari.

Space bar does not work when using Apple Wireless Keyboard with Safari to fill web forms.
No problem with Firefox.
Early 2008 iMac, 10.10.1, 6GB Ram

Im going to assume you are using the Apple Wireless Keyboard with your devices.
Whats probabaly happening is both of your devices are trying to connect to your keyboard at the same time and it is causing it to not function properly.
I suggest you disable bluetooth on the device you AREN'T using and try it again with the one you ARE using.
If this doesn't solve your issue, try re-pairing the keyboard with the iPad you wish to use it with. It may have just not made a strong connection.
Hope these suggestions help!

Similar Messages

A new wireless keyboard, does not work with 10.6.8.

but works with the Iphone, so the problem is not at the product I assume...

Hello:
If it is paired with the phone, it needs to be unpaired before it will connect to another device. BT devices (for obvious reasons) may only be paired with one thing at a time.
Barry

The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
Just in case the title is too long to show, I have re-pasted here:
The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

BDAqua wrote:
Hello & welcome to the Forums!
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php
http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
http://doublecommand.sourceforge.net/
Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss?

Adobe Flash Player does not work with Safari. What can I do?

Hi,
I have a MacBook Pro, Retina, 15 inch, late 2013, 2 GHz Intel Core i7, using OS X 10.9.4. I have installed Adobe Flash Player. In my System Preference, in the advanced settings, it is set to install updates also tells me that I have the NPAPI Plug-in (version 14.0.0.145) installed but not the PPAPI Plug-in. Is this the reason why it does not work with Safari (keeps telling me to download the app, which I did but still does not work)? Is there any way I could fix the problem? Please, help.
Thanks.

If you can't install or update Flash, follow these instructions.
If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 8. Back up all data before making any changes.
Step 1
You might have to log out or restart the computer before a Flash update takes effect.
Step 2
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
           ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
          When visiting other websites
From that menu, select either Allow or Ask.
b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
          Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 5
In the Safari preferences window, select the Advanced tab and uncheck the box marked
          Stop plug-ins to save power
Step 6
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
          Flash Player (failing).plugin
You may be prompted for your login password.
Step 7
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 8
If you get a "missing plug-in" error, select
          Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
          Allow (or Enable) plug-ins
Then click the button marked
          Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 9
Select
          Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.

The wireless keyboard is not working with my iPad2. I turned on Bluetooth and paired it. What else is there to do?

The wireless keyboard is not working with my iPad2. I turned on bluetooth and paired the device. What other hidden step is there to do?

Well, the tiny green light comes on and blinks. . . After a frustrating time, I turned everything off. Later, when I tried the keyboard again, it worked. I guess the bluetooth process takes longer than expected. So thank you for taking the time to help a technically impaired person!!

I have wireless mouse does not work with boot camp

i have wireless mouse does not work with boot camp

Did you install the correct driver for your Windows version? Are you saying the mouse does not work in Windows after Windows is installed?

External USB keyboard does not work with T60 after BIOS upgrade

External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
It does the same with or without the docking station.
Anyone else bumped into this problem yet?
Has someone found any fixes for this?
t

Hi and welcome the forum!
Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Wireless keyboard does not work after waking up from idle

After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?

After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?

Apple USB keyboard does not work with one internal usb port

Hi everyone,
hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
After searching the web on such problem, I tries a few things such as:
I tried the keyboard on another computer (windows): works fine
I tried usb stick and external DVD reading on the left internal usb ports: works fine
I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
I tried the SMC and PRAM reset : nothing
Any idea ??
Thanks
Guillaume

I'm facing the same problem, found any solutions ?

KG 1061 Wireless Keyboard Does not work

Key "a" stopped working after I haven’t used my computer for a week. Other keys seem fine.
It was working fine before. I’ve tried replacing batteries, uninstalling the keyboard and updating driver. Nothing works. Please help!

Hello @Francescalam,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the wireless keyboard on your desktop computer does not work, and I would be happy to assist you in this matter!
To re-enable the wireless keyboard for your system, I recommend following the steps in this document on Wireless Keyboard and Mouse Troubleshooting.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Thinkpad laptop, red "mouse" button/nub in keyboard does not work with version 4.0, Why?

IBM and/or Lenova laptop computers have the red button/nub in the center of the keyboard that acts with "mouse" functions such as scrolling up and down pages. After downloading Version 4.0 of Firefox this feature does not work anymore. Is it locked in some settings?

i figured it out!
1) go to control panel
2) click on mouse
3) click on the UltraNav tab at the top
4) for the TrackPoint, i have the Enable TrackPoint box checked and the "Use as pointing device with advanced features
5) click on Settings
6) click on settings again towards the bottom right
7) for "Scrolling Type" click on Smooth.
that should work!

USB Ultranav keyboard does not work with Windows 7

Hi, I recently installed Windows 7 to my Dell Latitude XT tablet and was disappointed to learn that my USB Ultranav Keyboard only works as a keyboard and not a 'mouse'; that is, the ultranav devices (touchpad, buttons, and trackpoint) do not work. I have not had problems with the keyboard functioning in XP or Vista, so it was surprising to find that it will not work with W7.
I thought all was going well when W7 recognized the Ultranav keyboard when I plugged-in the device, but all did not go as planned. I let W7 find the drivers through Windows update, but then once they didn't prove to work, I followed W7's directions of reinstalling the drivers in its version of 'Compatability Mode', but that still didn't prove to work. I would really appreciate any insights into this problem as it is one of my only (current) hesitancies about using W7.
Thank you for your time and attention to my inquiry.
Cheers,
Tsugazi

Hi, strangely enough, I got it to work. Here's the what I did differently (for those with a similar problem):
After installing W7, I plugged in my keyboard and let Windows find the drivers. When this didn't provide functionality of the ultranav devices, I tried installing the Ultranav drivers, and when Windows said there was a compatability problem, I then opted to let Windows re-install the Ultranav driver. Unfortunately, this didn't provide functionality either.
Jump ahead 12 hrs and re-install of W7 (for other reasons). This time out, I installed the Ultranav driver, THEN plugged in my keyboard. Everything works now! I don't know that this sequence will work for everyone, but it did for me.
Thanks for your comments.
Cheers,
tsugazi

Wireless scanning does not work with Yosemite

When I uppgraded from Mavericks to Yosemite the wireless scanning doesn't work anymore.Tried to find some new driver at the support page, but there are only drivers for Maveriks and erlier versions of OS X.

Hi , Welcome to the HP Forums! I noticed that wireless scanning is not working after upgrading to Mac OS X 10.10, with your HP Deskjet 3520 printer. I am happy to help! Some questions for you: Is your HP Deskjet printer an all-in-one? Meaning, can it print, scan and copy?What is your printer's Product/Model Number? To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. As their are multiple types HP Deskjet 3520 printers.Are you able to make a copy with the printer from the scanner glass? In the meantime, please see this how to scan guide, Scanning in OS X v10.10 Yosemite without HP Software, for some alternative scanning methods, and let me know if any of these options work! Thank you for posting, and hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

TS3048 wireless keyboard does not work

I just used my Apple wireless keyboard a few days ago. Today I cannot get it working. Caps lock does not even light up, so I canged batteries. My MacMini cannot detect bluetooth of my keyboard, it seems. Any suggestions?

Hello:
Try resetting the SMC.
Barry

JoikuSpot Premium WiFi does not work with Safari

Hi,
My Nokia E-72 with JoikuSpot Premium WLAN Hotspot can connect to my iPad (OS 4.2.1)but I cant get on to internet with Safari or any app. Is it possible to set the iPad to "Computer–to-computer (ad-hoc) networks.?
Or what shall I do?

yes! something happen with wifi from ipod touch 2g, last week i restored it from itunes because i dont know why the wifi stopped working and then suddenly i couldnt find my wireless connection... but my laptop and other ones does... that problem happened once one month ago before i tried the update (it fix some errors somebody said ) but now the problems are usually more often, by just listening music while is horizontal and then trying to go vertical the music stops and goes to home (principal) and so with the internet... i bought my ipod in chicago in december 28 and now im in lima and im very dissapointed because when ipod touch 2g came out everything was fantastic, i have been using ipods since they came out to stores... and now i think that expending 265$ for this one was useless... im so bad
my connection to wifi has no answer, and now everyday i have an stop while listening music... im so so sad!

Wireless keyboard does not work with Safari.

Similar Messages

Maybe you are looking for