Wireless mouse pointer which does not move after boot *sometimes*
Hi,
I have a wireless keyboard/mouse combo from Logitech (MK700 keyboard and MX705 mouse), which uses a USB receiver.
After booting, the mouse pointer sometimes is completely blocked, and I have to reboot to make it work. Sometimes I need to do this twice. I cannot reproduce it and this is not linked to the fact the mouse is active or on sleep mode. This seems to be a race condition, considering it is difficult to reproduce. Once the mouse pointer is working, there is no issue anymore during desktop use.
I compared lsmod when mouse pointer is working or not, and did not see any difference in the loaded modules.
This started to happen maybe 3 months ago. I have had this hardware for two years with no problem in the past. It is not a battery problem either.
Has anyone an idea?
Last edited by zebulon (2012-03-21 07:22:53)
Thanks.
Ther is indeed a difference in evedev detection in Xorg logs when mouse is working or not working.
Not working:
[ 22.745]
X.Org X Server 1.12.0
Release Date: 2012-03-04
[ 22.765] X Protocol Version 11, Revision 0
[ 22.765] Build Operating System: Linux 3.2.9-1-ARCH x86_64
[ 22.765] Current Operating System: Linux arch 3.2.12-1-ARCH #1 SMP PREEMPT Mon Mar 19 17:50:01 CET 2012 x86_64
[ 22.765] Kernel command line: root=/dev/sda6 ro vga=891
[ 22.765] Build Date: 05 March 2012 05:59:48AM
[ 22.765]
[ 22.765] Current version of pixman: 0.24.4
[ 22.765] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.765] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.765] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 06:16:55 2012
[ 22.816] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.816] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.841] (==) No Layout section. Using the first Screen section.
[ 22.841] (**) |-->Screen "screen1" (0)
[ 22.841] (**) | |-->Monitor "monitor1"
[ 22.841] (**) | |-->Device "device1"
[ 22.841] (**) Option "IgnoreABI" "True"
[ 22.841] (**) Ignoring ABI Version
[ 22.841] (==) Automatically adding devices
[ 22.841] (==) Automatically enabling devices
[ 22.866] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 22.866] Entry deleted from font path.
[ 22.871] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 22.871] Entry deleted from font path.
[ 22.871] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 22.871] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 22.871] Entry deleted from font path.
[ 22.871] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 22.871] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 22.871] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.871] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.871] (II) Loader magic: 0x7cef60
[ 22.871] (II) Module ABI versions:
[ 22.871] X.Org ANSI C Emulation: 0.4
[ 22.871] X.Org Video Driver: 12.0
[ 22.871] X.Org XInput driver : 16.0
[ 22.871] X.Org Server Extension : 6.0
[ 22.872] (--) PCI:*(0:1:0:0) 10de:05e2:1682:2394 rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
[ 22.872] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 22.872] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
[ 22.872] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 22.872] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 22.872] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 22.872] (II) "record" will be loaded by default.
[ 22.872] (II) "dri" will be loaded even though the default is to disable it.
[ 22.872] (II) "dri2" will be loaded by default.
[ 22.872] (II) LoadModule: "dbe"
[ 22.948] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 22.955] (II) Module dbe: vendor="X.Org Foundation"
[ 22.955] compiled for 1.12.0, module version = 1.0.0
[ 22.955] Module class: X.Org Server Extension
[ 22.955] ABI class: X.Org Server Extension, version 6.0
[ 22.955] (II) Loading extension DOUBLE-BUFFER
[ 22.955] (II) LoadModule: "v4l"
[ 22.955] (WW) Warning, couldn't open module v4l
[ 22.955] (II) UnloadModule: "v4l"
[ 22.955] (II) Unloading v4l
[ 22.955] (EE) Failed to load module "v4l" (module does not exist, 0)
[ 22.955] (II) LoadModule: "extmod"
[ 22.955] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 22.968] (II) Module extmod: vendor="X.Org Foundation"
[ 22.968] compiled for 1.12.0, module version = 1.0.0
[ 22.968] Module class: X.Org Server Extension
[ 22.968] ABI class: X.Org Server Extension, version 6.0
[ 22.968] (II) Loading extension MIT-SCREEN-SAVER
[ 22.968] (II) Loading extension XFree86-VidModeExtension
[ 22.968] (II) Loading extension XFree86-DGA
[ 22.968] (II) Loading extension DPMS
[ 22.968] (II) Loading extension XVideo
[ 22.968] (II) Loading extension XVideo-MotionCompensation
[ 22.968] (II) Loading extension X-Resource
[ 22.968] (II) LoadModule: "glx"
[ 22.968] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.007] (II) Module glx: vendor="NVIDIA Corporation"
[ 24.018] compiled for 4.0.2, module version = 1.0.0
[ 24.018] Module class: X.Org Server Extension
[ 24.018] (II) NVIDIA GLX Module 295.20 Mon Feb 6 21:28:16 PST 2012
[ 24.018] (II) Loading extension GLX
[ 24.018] (II) LoadModule: "record"
[ 24.019] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 24.026] (II) Module record: vendor="X.Org Foundation"
[ 24.026] compiled for 1.12.0, module version = 1.13.0
[ 24.026] Module class: X.Org Server Extension
[ 24.026] ABI class: X.Org Server Extension, version 6.0
[ 24.026] (II) Loading extension RECORD
[ 24.026] (II) LoadModule: "dri2"
[ 24.026] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.034] (II) Module dri2: vendor="X.Org Foundation"
[ 24.034] compiled for 1.12.0, module version = 1.2.0
[ 24.034] ABI class: X.Org Server Extension, version 6.0
[ 24.034] (II) Loading extension DRI2
[ 24.034] (II) LoadModule: "nvidia"
[ 24.035] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 24.111] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 24.120] compiled for 4.0.2, module version = 1.0.0
[ 24.120] Module class: X.Org Video Driver
[ 24.154] (II) NVIDIA dlloader X Driver 295.20 Mon Feb 6 21:09:10 PST 2012
[ 24.154] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 24.161] (++) using VT number 7
[ 24.734] (II) Loading sub module "fb"
[ 24.734] (II) LoadModule: "fb"
[ 24.735] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.832] (II) Module fb: vendor="X.Org Foundation"
[ 24.832] compiled for 1.12.0, module version = 1.0.0
[ 24.832] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.832] (II) Loading sub module "wfb"
[ 24.832] (II) LoadModule: "wfb"
[ 24.832] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 27.003] (II) Module wfb: vendor="X.Org Foundation"
[ 27.003] compiled for 1.12.0, module version = 1.0.0
[ 27.003] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.003] (II) Loading sub module "ramdac"
[ 27.003] (II) LoadModule: "ramdac"
[ 27.003] (II) Module "ramdac" already built-in
[ 29.070] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 29.070] (==) NVIDIA(0): RGB weight 888
[ 29.070] (==) NVIDIA(0): Default visual is TrueColor
[ 29.070] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 29.070] (**) NVIDIA(0): Option "UseEdidDpi" "False"
[ 29.070] (**) NVIDIA(0): Option "DPI" "96 x 96"
[ 29.070] (**) NVIDIA(0): Enabling 2D acceleration
[ 31.411] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
[ 31.411] (II) NVIDIA(GPU-0): stereo.
[ 31.416] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:1:0:0 (GPU-0)
[ 31.416] (--) NVIDIA(0): Memory: 917504 kBytes
[ 31.416] (--) NVIDIA(0): VideoBIOS: 62.00.50.00.52
[ 31.416] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 31.416] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 31.417] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 260 at PCI:1:0:0
[ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1)
[ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1): 330.0 MHz maximum pixel clock
[ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Dual Link TMDS
[ 31.503] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 31.503] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
[ 31.503] (**) NVIDIA(0): enabled on all display devices.)
[ 31.538] (II) NVIDIA(0): Assigned Display Device: DFP-1
[ 31.538] (WW) NVIDIA(0): No valid modes for "1600x900"; removing.
[ 31.538] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
[ 31.538] (WW) NVIDIA(0): No valid modes for "1360x765"; removing.
[ 31.538] (II) NVIDIA(0): Validated modes:
[ 31.538] (II) NVIDIA(0): "1920x1080"
[ 31.538] (II) NVIDIA(0): "1280x720"
[ 31.538] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 31.566] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
[ 31.566] (--) Depth 24 pixmap format is 32 bpp
[ 31.567] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 31.571] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 31.571] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 31.571] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 31.571] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 31.571] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 31.571] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 31.571] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 31.571] (II) NVIDIA(0): Config Options in the README.
[ 31.575] (II) NVIDIA(0): Setting mode "1920x1080"
[ 31.608] (II) Loading extension NV-GLX
[ 31.630] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 31.630] (==) NVIDIA(0): Backing store disabled
[ 31.630] (==) NVIDIA(0): Silken mouse enabled
[ 31.631] (**) NVIDIA(0): DPMS enabled
[ 31.631] (II) Loading extension NV-CONTROL
[ 31.631] (II) Loading extension XINERAMA
[ 31.631] (WW) NVIDIA(0): Option "PreferredMode" is not used
[ 31.631] (II) Loading sub module "dri2"
[ 31.631] (II) LoadModule: "dri2"
[ 31.631] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 31.631] (II) Module dri2: vendor="X.Org Foundation"
[ 31.631] compiled for 1.12.0, module version = 1.2.0
[ 31.631] ABI class: X.Org Server Extension, version 6.0
[ 31.631] (II) NVIDIA(0): [DRI2] Setup complete
[ 31.631] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 31.631] (==) RandR enabled
[ 31.631] (II) Initializing built-in extension Generic Event Extension
[ 31.631] (II) Initializing built-in extension SHAPE
[ 31.631] (II) Initializing built-in extension MIT-SHM
[ 31.631] (II) Initializing built-in extension XInputExtension
[ 31.631] (II) Initializing built-in extension XTEST
[ 31.631] (II) Initializing built-in extension BIG-REQUESTS
[ 31.631] (II) Initializing built-in extension SYNC
[ 31.631] (II) Initializing built-in extension XKEYBOARD
[ 31.631] (II) Initializing built-in extension XC-MISC
[ 31.631] (II) Initializing built-in extension SECURITY
[ 31.631] (II) Initializing built-in extension XINERAMA
[ 31.631] (II) Initializing built-in extension XFIXES
[ 31.631] (II) Initializing built-in extension RENDER
[ 31.631] (II) Initializing built-in extension RANDR
[ 31.631] (II) Initializing built-in extension COMPOSITE
[ 31.631] (II) Initializing built-in extension DAMAGE
[ 31.632] (II) Initializing extension GLX
[ 32.105] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 32.105] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.105] (II) LoadModule: "evdev"
[ 32.105] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 32.188] (II) Module evdev: vendor="X.Org Foundation"
[ 32.188] compiled for 1.12.0, module version = 2.7.0
[ 32.188] Module class: X.Org XInput Driver
[ 32.188] ABI class: X.Org XInput driver, version 16.0
[ 32.188] (II) Using input driver 'evdev' for 'Power Button'
[ 32.188] (**) Power Button: always reports core events
[ 32.188] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 32.188] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.188] (--) evdev: Power Button: Found keys
[ 32.188] (II) evdev: Power Button: Configuring as keyboard
[ 32.188] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 32.188] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 32.188] (**) Option "xkb_rules" "evdev"
[ 32.188] (**) Option "xkb_model" "evdev"
[ 32.188] (**) Option "xkb_layout" "gb"
[ 32.240] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 32.240] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.240] (II) Using input driver 'evdev' for 'Power Button'
[ 32.240] (**) Power Button: always reports core events
[ 32.240] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 32.240] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 32.241] (--) evdev: Power Button: Found keys
[ 32.241] (II) evdev: Power Button: Configuring as keyboard
[ 32.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 32.241] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 32.241] (**) Option "xkb_rules" "evdev"
[ 32.241] (**) Option "xkb_model" "evdev"
[ 32.241] (**) Option "xkb_layout" "gb"
[ 32.241] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2008 (/dev/input/event0)
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: Applying InputClass "evdev keyboard catchall"
[ 32.241] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2008'
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: always reports core events
[ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: Device: "/dev/input/event0"
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Vendor 0x46d Product 0xc52b
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found 1 mouse buttons
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found scroll wheel(s)
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found relative axes
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found absolute axes
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing absolute x/y axes to exist.
[ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found keys
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as mouse
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as keyboard
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Adding scrollwheel support
[ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: YAxisMapping: buttons 4 and 5
[ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 32.241] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input0/event0"
[ 32.241] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2008" (type: KEYBOARD, id 8)
[ 32.241] (**) Option "xkb_rules" "evdev"
[ 32.241] (**) Option "xkb_model" "evdev"
[ 32.241] (**) Option "xkb_layout" "gb"
[ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: initialized for relative axes.
[ 32.241] (WW) evdev: Logitech Unifying Device. Wireless PID:2008: ignoring absolute axes.
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) keeping acceleration scheme 1
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration profile 0
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration factor: 2.000
[ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration threshold: 4
[ 32.241] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event4)
[ 32.241] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
[ 32.241] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
[ 32.241] (**) UVC Camera (046d:09a4): always reports core events
[ 32.241] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event4"
[ 32.241] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
[ 32.241] (--) evdev: UVC Camera (046d:09a4): Found keys
[ 32.241] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
[ 32.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.0/input/input4/event4"
[ 32.242] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 9)
[ 32.242] (**) Option "xkb_rules" "evdev"
[ 32.242] (**) Option "xkb_model" "evdev"
[ 32.242] (**) Option "xkb_layout" "gb"
[ 32.242] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 32.242] (II) No input driver specified, ignoring this device.
[ 32.242] (II) This device may have been added with another device file.
Working:
[ 21.623]
X.Org X Server 1.12.0
Release Date: 2012-03-04
[ 21.642] X Protocol Version 11, Revision 0
[ 21.642] Build Operating System: Linux 3.2.9-1-ARCH x86_64
[ 21.642] Current Operating System: Linux arch 3.2.12-1-ARCH #1 SMP PREEMPT Mon Mar 19 17:50:01 CET 2012 x86_64
[ 21.642] Kernel command line: root=/dev/sda6 ro vga=891
[ 21.642] Build Date: 05 March 2012 05:59:48AM
[ 21.642]
[ 21.642] Current version of pixman: 0.24.4
[ 21.642] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.642] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.643] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 06:18:23 2012
[ 21.702] (==) Using config file: "/etc/X11/xorg.conf"
[ 21.702] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 21.727] (==) No Layout section. Using the first Screen section.
[ 21.727] (**) |-->Screen "screen1" (0)
[ 21.727] (**) | |-->Monitor "monitor1"
[ 21.727] (**) | |-->Device "device1"
[ 21.727] (**) Option "IgnoreABI" "True"
[ 21.727] (**) Ignoring ABI Version
[ 21.727] (==) Automatically adding devices
[ 21.727] (==) Automatically enabling devices
[ 21.752] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 21.752] Entry deleted from font path.
[ 21.757] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 21.757] Entry deleted from font path.
[ 21.757] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 21.765] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 21.765] Entry deleted from font path.
[ 21.765] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 21.765] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 21.765] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 21.765] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 21.765] (II) Loader magic: 0x7cef60
[ 21.765] (II) Module ABI versions:
[ 21.765] X.Org ANSI C Emulation: 0.4
[ 21.765] X.Org Video Driver: 12.0
[ 21.765] X.Org XInput driver : 16.0
[ 21.765] X.Org Server Extension : 6.0
[ 21.766] (--) PCI:*(0:1:0:0) 10de:05e2:1682:2394 rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
[ 21.766] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 21.766] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
[ 21.766] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 21.766] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 21.766] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 21.766] (II) "record" will be loaded by default.
[ 21.766] (II) "dri" will be loaded even though the default is to disable it.
[ 21.766] (II) "dri2" will be loaded by default.
[ 21.766] (II) LoadModule: "dbe"
[ 21.826] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 21.833] (II) Module dbe: vendor="X.Org Foundation"
[ 21.833] compiled for 1.12.0, module version = 1.0.0
[ 21.833] Module class: X.Org Server Extension
[ 21.833] ABI class: X.Org Server Extension, version 6.0
[ 21.833] (II) Loading extension DOUBLE-BUFFER
[ 21.833] (II) LoadModule: "v4l"
[ 21.833] (WW) Warning, couldn't open module v4l
[ 21.833] (II) UnloadModule: "v4l"
[ 21.833] (II) Unloading v4l
[ 21.833] (EE) Failed to load module "v4l" (module does not exist, 0)
[ 21.833] (II) LoadModule: "extmod"
[ 21.833] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 21.846] (II) Module extmod: vendor="X.Org Foundation"
[ 21.846] compiled for 1.12.0, module version = 1.0.0
[ 21.846] Module class: X.Org Server Extension
[ 21.846] ABI class: X.Org Server Extension, version 6.0
[ 21.846] (II) Loading extension MIT-SCREEN-SAVER
[ 21.846] (II) Loading extension XFree86-VidModeExtension
[ 21.846] (II) Loading extension XFree86-DGA
[ 21.846] (II) Loading extension DPMS
[ 21.846] (II) Loading extension XVideo
[ 21.846] (II) Loading extension XVideo-MotionCompensation
[ 21.846] (II) Loading extension X-Resource
[ 21.846] (II) LoadModule: "glx"
[ 21.846] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.902] (II) Module glx: vendor="NVIDIA Corporation"
[ 22.913] compiled for 4.0.2, module version = 1.0.0
[ 22.913] Module class: X.Org Server Extension
[ 22.913] (II) NVIDIA GLX Module 295.20 Mon Feb 6 21:28:16 PST 2012
[ 22.913] (II) Loading extension GLX
[ 22.913] (II) LoadModule: "record"
[ 22.913] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 22.921] (II) Module record: vendor="X.Org Foundation"
[ 22.921] compiled for 1.12.0, module version = 1.13.0
[ 22.921] Module class: X.Org Server Extension
[ 22.921] ABI class: X.Org Server Extension, version 6.0
[ 22.921] (II) Loading extension RECORD
[ 22.921] (II) LoadModule: "dri2"
[ 22.921] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 22.929] (II) Module dri2: vendor="X.Org Foundation"
[ 22.929] compiled for 1.12.0, module version = 1.2.0
[ 22.929] ABI class: X.Org Server Extension, version 6.0
[ 22.929] (II) Loading extension DRI2
[ 22.929] (II) LoadModule: "nvidia"
[ 22.929] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 23.006] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 23.014] compiled for 4.0.2, module version = 1.0.0
[ 23.014] Module class: X.Org Video Driver
[ 23.040] (II) NVIDIA dlloader X Driver 295.20 Mon Feb 6 21:09:10 PST 2012
[ 23.040] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 23.047] (++) using VT number 7
[ 23.721] (II) Loading sub module "fb"
[ 23.721] (II) LoadModule: "fb"
[ 23.721] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.428] (II) Module fb: vendor="X.Org Foundation"
[ 24.428] compiled for 1.12.0, module version = 1.0.0
[ 24.428] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.428] (II) Loading sub module "wfb"
[ 24.428] (II) LoadModule: "wfb"
[ 24.428] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 26.531] (II) Module wfb: vendor="X.Org Foundation"
[ 26.531] compiled for 1.12.0, module version = 1.0.0
[ 26.531] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.531] (II) Loading sub module "ramdac"
[ 26.531] (II) LoadModule: "ramdac"
[ 26.531] (II) Module "ramdac" already built-in
[ 27.811] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 27.811] (==) NVIDIA(0): RGB weight 888
[ 27.811] (==) NVIDIA(0): Default visual is TrueColor
[ 27.811] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 27.811] (**) NVIDIA(0): Option "UseEdidDpi" "False"
[ 27.811] (**) NVIDIA(0): Option "DPI" "96 x 96"
[ 27.811] (**) NVIDIA(0): Enabling 2D acceleration
[ 29.881] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
[ 29.881] (II) NVIDIA(GPU-0): stereo.
[ 29.911] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:1:0:0 (GPU-0)
[ 29.911] (--) NVIDIA(0): Memory: 917504 kBytes
[ 29.911] (--) NVIDIA(0): VideoBIOS: 62.00.50.00.52
[ 29.911] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 29.911] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 29.911] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 260 at PCI:1:0:0
[ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1)
[ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1): 330.0 MHz maximum pixel clock
[ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Dual Link TMDS
[ 29.997] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 29.997] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
[ 29.997] (**) NVIDIA(0): enabled on all display devices.)
[ 30.033] (II) NVIDIA(0): Assigned Display Device: DFP-1
[ 30.033] (WW) NVIDIA(0): No valid modes for "1600x900"; removing.
[ 30.033] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
[ 30.033] (WW) NVIDIA(0): No valid modes for "1360x765"; removing.
[ 30.033] (II) NVIDIA(0): Validated modes:
[ 30.033] (II) NVIDIA(0): "1920x1080"
[ 30.033] (II) NVIDIA(0): "1280x720"
[ 30.033] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 30.068] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
[ 30.068] (--) Depth 24 pixmap format is 32 bpp
[ 30.068] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 30.072] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 30.072] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 30.072] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 30.072] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 30.072] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 30.072] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 30.072] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 30.072] (II) NVIDIA(0): Config Options in the README.
[ 30.076] (II) NVIDIA(0): Setting mode "1920x1080"
[ 30.119] (II) Loading extension NV-GLX
[ 30.149] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 30.149] (==) NVIDIA(0): Backing store disabled
[ 30.149] (==) NVIDIA(0): Silken mouse enabled
[ 30.149] (**) NVIDIA(0): DPMS enabled
[ 30.149] (II) Loading extension NV-CONTROL
[ 30.150] (II) Loading extension XINERAMA
[ 30.150] (WW) NVIDIA(0): Option "PreferredMode" is not used
[ 30.150] (II) Loading sub module "dri2"
[ 30.150] (II) LoadModule: "dri2"
[ 30.150] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.150] (II) Module dri2: vendor="X.Org Foundation"
[ 30.150] compiled for 1.12.0, module version = 1.2.0
[ 30.150] ABI class: X.Org Server Extension, version 6.0
[ 30.150] (II) NVIDIA(0): [DRI2] Setup complete
[ 30.150] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 30.150] (==) RandR enabled
[ 30.150] (II) Initializing built-in extension Generic Event Extension
[ 30.150] (II) Initializing built-in extension SHAPE
[ 30.150] (II) Initializing built-in extension MIT-SHM
[ 30.150] (II) Initializing built-in extension XInputExtension
[ 30.150] (II) Initializing built-in extension XTEST
[ 30.150] (II) Initializing built-in extension BIG-REQUESTS
[ 30.150] (II) Initializing built-in extension SYNC
[ 30.150] (II) Initializing built-in extension XKEYBOARD
[ 30.150] (II) Initializing built-in extension XC-MISC
[ 30.150] (II) Initializing built-in extension SECURITY
[ 30.150] (II) Initializing built-in extension XINERAMA
[ 30.150] (II) Initializing built-in extension XFIXES
[ 30.150] (II) Initializing built-in extension RENDER
[ 30.150] (II) Initializing built-in extension RANDR
[ 30.150] (II) Initializing built-in extension COMPOSITE
[ 30.150] (II) Initializing built-in extension DAMAGE
[ 30.151] (II) Initializing extension GLX
[ 30.624] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 30.624] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.624] (II) LoadModule: "evdev"
[ 30.624] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.633] (II) Module evdev: vendor="X.Org Foundation"
[ 30.633] compiled for 1.12.0, module version = 2.7.0
[ 30.633] Module class: X.Org XInput Driver
[ 30.633] ABI class: X.Org XInput driver, version 16.0
[ 30.633] (II) Using input driver 'evdev' for 'Power Button'
[ 30.633] (**) Power Button: always reports core events
[ 30.633] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 30.633] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.633] (--) evdev: Power Button: Found keys
[ 30.633] (II) evdev: Power Button: Configuring as keyboard
[ 30.633] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 30.633] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 30.633] (**) Option "xkb_rules" "evdev"
[ 30.633] (**) Option "xkb_model" "evdev"
[ 30.633] (**) Option "xkb_layout" "gb"
[ 30.677] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 30.677] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.677] (II) Using input driver 'evdev' for 'Power Button'
[ 30.677] (**) Power Button: always reports core events
[ 30.677] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 30.677] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.677] (--) evdev: Power Button: Found keys
[ 30.677] (II) evdev: Power Button: Configuring as keyboard
[ 30.677] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 30.677] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 30.677] (**) Option "xkb_rules" "evdev"
[ 30.677] (**) Option "xkb_model" "evdev"
[ 30.677] (**) Option "xkb_layout" "gb"
[ 30.677] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event0)
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[ 30.677] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event0"
[ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.677] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input0/event0"
[ 30.677] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 8)
[ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
[ 30.677] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse0)
[ 30.677] (II) No input driver specified, ignoring this device.
[ 30.677] (II) This device may have been added with another device file.
[ 30.678] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2008 (/dev/input/event1)
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: Applying InputClass "evdev keyboard catchall"
[ 30.678] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2008'
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: always reports core events
[ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: Device: "/dev/input/event1"
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Vendor 0x46d Product 0xc52b
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found 1 mouse buttons
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found scroll wheel(s)
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found relative axes
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found absolute axes
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing absolute x/y axes to exist.
[ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found keys
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as mouse
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as keyboard
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Adding scrollwheel support
[ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: YAxisMapping: buttons 4 and 5
[ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input1/event1"
[ 30.678] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2008" (type: KEYBOARD, id 9)
[ 30.678] (**) Option "xkb_rules" "evdev"
[ 30.678] (**) Option "xkb_model" "evdev"
[ 30.678] (**) Option "xkb_layout" "gb"
[ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: initialized for relative axes.
[ 30.678] (WW) evdev: Logitech Unifying Device. Wireless PID:2008: ignoring absolute axes.
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) keeping acceleration scheme 1
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration profile 0
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration factor: 2.000
[ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration threshold: 4
[ 30.678] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event5)
[ 30.678] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
[ 30.678] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
[ 30.678] (**) UVC Camera (046d:09a4): always reports core events
[ 30.678] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event5"
[ 30.678] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
[ 30.678] (--) evdev: UVC Camera (046d:09a4): Found keys
[ 30.678] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
[ 30.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.0/input/input5/event5"
[ 30.678] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 10)
[ 30.678] (**) Option "xkb_rules" "evdev"
[ 30.678] (**) Option "xkb_model" "evdev"
[ 30.678] (**) Option "xkb_layout" "gb"
[ 30.678] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 30.678] (II) No input driver specified, ignoring this device.
[ 30.678] (II) This device may have been added with another device file.
I note the differences start there:
(--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
vs
(II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
Could my Logitech camera interfere with the keyboard/mouse unifier detection?
Similar Messages
-
HP wireless mouse H1D34AA cursor does not move
My wireless mouse sometimes does not work - ie the cursor does not move although I can click and the light comes on. Batteries have been changed. This seems to happen intermittently. Any ideas? I have looked at devices and properties etc and removed the dongle and replaced it, nothing seems to work. This mouse is about 6 months old! Thanks
My wireless mouse sometimes does not work - ie the cursor does not move although I can click and the light comes on. Batteries have been changed. This seems to happen intermittently. Any ideas? I have looked at devices and properties etc and removed the dongle and replaced it, nothing seems to work. This mouse is about 6 months old! Thanks
-
J2EE ADDIn INSTALLATION DOES NOT MOVE AFTER ABAP UME STAGE
Hi,
I am installing java add-in for ABAP system for NW2004s SR2 system. I am able to complete SCS and DB instances. But during installation of CI at step u201CSAP system > ABAP UME u201Cafter
pressing u201CNext u201Cbutton the installation does not continue without any
warning or error message, It asks for SDM password and J2EE_ADMIN password, even after I give the password, the installation does not go forward. After pressing next it still comes to the same step.
I had done a proper un-install through SAPinst, cleaned up all the j2ee and SDM folders manually, changed the jdk version, etc and tried, but still the same issue.
I had created j2ee_admin, sapjsf, j2ee_guest users manually, cleared j2ee and SDM folders manually and tried to re-install but the same issue.
There are no error messages or logs given, but just the issue. Any help at the earliest would be appreciable.
The only error message I can read is as below:
INFO 2008-05-28 17:06:38
Creating file
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.jlaunch.
INFO 2008-05-28 17:06:38
Creating file
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.log.
INFO 2008-05-28 17:06:39
Output of
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/jlaunch
UserCheck.jlaunch com.sap.security.tools.UserCheck
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install
-c sysnr=40 -c ashost=nzlsfn23 -c client=800 -c user=DDIC -c XXXXXX -a
checkBeforeCreate -u J2EE_ADMIN -r SAP_J2EE_ADMIN -message_file
UserCheck.message is written to the logfile
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.log.
WARNING 2008-05-28 17:06:42
Execution of the command
"/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/jlaunch
UserCheck.jlaunch com.sap.security.tools.UserCheck
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install
-c sysnr=40 -c ashost=nzlsfn23 -c client=800 -c user=DDIC -c XXXXXX -a
checkBeforeCreate -u J2EE_ADMIN -r SAP_J2EE_ADMIN -message_file
UserCheck.message" finished with return code 254. Output:
INFO 2008-05-28 17:06:42
Removing file
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/dev_UserCheck.
System details
Kernel release: 95 64bit
Unicode: - NO
Operating system: SunOS 5.9 Generic_122300-08 sun4u sparc SUNW,Sun-Fire-15000
Thanks,
PKHi markus,
May be this additional information would help.
the sapinst_dev.log shows the following:
INFO 2008-05-30 13:37:38 [syuxcpath.cpp:351]
CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.jlaunch.
INFO 2008-05-30 13:37:38 [syuxcpath.cpp:351]
CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.log.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 22550
INFO 2008-05-30 13:37:39
CJSlibModule::writeInfo_impl()
Output of /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install -c sysnr=40 -c ashost=nzlsfn23 -c client=800 -c user=DDIC -c XXXXXX -a checkBeforeCreate -u J2EE_ADMIN -p XXXXXX -r SAP_J2EE_ADMIN -message_file UserCheck.message is written to the logfile /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/UserCheck.log.
WARNING 2008-05-30 13:37:44
CJSlibModule::writeWarning_impl()
Execution of the command "/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install -c sysnr=40 -c ashost=nzlsfn23 -c client=800 -c user=DDIC -c XXXXXX -a checkBeforeCreate -u J2EE_ADMIN -p XXXXXX -r SAP_J2EE_ADMIN -message_file UserCheck.message" finished with return code 254. Output:
INFO 2008-05-30 13:37:44 [syuxcfile.cpp:280]
CSyFileImpl::remove()
Removing file /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/dev_UserCheck.
TRACE [iaxxejsexp.cpp:199]
EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.ume.generalError:
. For more details see output of logfile:
TRACE [iaxxdlghnd.cpp:150]
CDialogHandler::doHandleDoc()
Dialog validator of dialog : d_nw_ume_doublestack_passwords
called by :|NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|NW_UME_Configuration|ind|ind|ind|ind|1|0|NW_UME_Configuration_Doublestack|ind|ind|ind|ind|1|0|askPasswords
returns false without any additional information.
Please inform the installation development.
TRACE [iaxxgenimp.cpp:1155]
showDialog()
waiting for an answer from gui
nzlsfn23:bd2adm 93%
Regards,
P. Kumaravel. -
I have just moved and am setting up my Mac again. It immediately found the mouse but cannot seem to find the wireless keyboard. What does it mean to be discoverable? The keyboard is on with blinking green light, but the computer can't seem to find it. What do I do?
What does it mean to be discoverable?
Open System Preferences > Bluetooth
Make sure On and Discoverable are both selected. -
Apple wireless mouse does not reconnect after changing batteries
The wireless mouse on my iMac quit working after I changed batteries. There was no response to mouse clicks, or movement, or scrolling. Eventually I connected a USB mouse, did an orderly shutdown of the system, rebooted, and the mouse started working again.
The long story ...
The first time I encountered this problem was the first time I changed batteries in the Apple Wireless Mouse that came with the iMac 3.06 GHz Intel Core 2 Duo I purchased in January 2010. (The OS is 10.6.2 without updates.) I switched the mouse on, the green light on the bottom of the mouse blinked for awhile (at least a minute), but clicking or moving the mouse got no response. The new batteries were Eneloop 1.2v rechargeables. I tried clicking and moving the mouse several times over a period of ten or fifteen minutes, nothing.
I started searching the web for clues about what to do and maybe a half hour or so later I tried the mouse again and it worked.
A few days later I wanted to see if the problem was reproducible. I don’t remember now whether I removed the batteries and reinserted them or just power cycled the mouse, but again the mouse quit working. The green light would blink for awhile, about a minute, then would go off completely. I took this to mean the mouse was searching for the Bluetooth network, not finding it, and giving up. Over the period of half an hour or more I tried switching the mouse off and back on several times. The green light would blink, but nothing more.
I started searching for tips about reconnecting an Apple wireless mouse after changing batteries. I ran across a (2005) discussion on MacRumors forums titled “Wireless mouse troubleshooting problem...” The symptom was a little different, the mouse was partially functional. In this discussion some contributors thought weak batteries could be to blame. So I replaced the rechargeable batteries with new alkaline batteries. Still no go.
I attached a USB mouse and looked at the Bluetooth preferences pane. I was surprised to see the Apple Wireless Mouse was listed there with status paired and connected. Still at this point switching the mouse off and on would produce blinking light on the mouse, but no functionality.
I tried various things in the Bluetooth preferences to see if I could get the mouse connection to restart. When I tried to delete the mouse connection there was an alert saying this was the only mouse connected, was I sure I wanted to disconnect. I said yes, but nothing changed in the Bluetooth preferences pane. I tried unchecking the Bluetooth “On” box, etc. Eventually I only succeeded in losing response to the keyboard as well.
I attached a USB keyboard, shutdown the system, and rebooted. I didn’t know if having the USB keyboard and mouse plugged in would interfere with the wireless devices, but it did not. After the reboot both the wireless keyboard and the mouse were functional again.
Since then I have tried removing the batteries briefly a couple of more times to see if the problem would recur. I actually put the rechargeable batteries back in. Both times the connection was remade as soon as I clicked the mouse. I also now have seen the Apple support article about setting favorite Bluetooth devices http://support.apple.com/kb/TA21371 . I'll try that if this issue comes up again.Hi, is this a question" Post?
or are you just offering an insight into your Mouse Issue?
Generally and at times we all have little idiosyncrasies appearing with the running of our Macs.
I use the same Logitech BT with my MBP. MB & iBook..(not at the same time) Only ever had one issue
and the cure was to completely Delete the mouse from BT -> Repair Permissions & Reboot then Re Install the BT mouse..Ihave just put a new set of batteries in the Logitech (only 2nd set ever)...L -
Mouse pointer does not move between monitors
my mouse pointer does not move between displays all of a sudden !
ok, I am using magic mouse, mac mini with two displays,
was working fine, but now when I started the computer recently it does not want to move the mouse to the other screen.
the other screen is open but it is not possible to move anything over to it !!
tried to restart reset the display settings etc. but no luck !! -
After printing one page, cartridge does not move
i reinstalled HP Officejet j4680 all in one printer, was not connecting to wireless internet connection. Now after printing one page, ink cartridge does not move, giving paper jam error but actually there is no paper jam. Any solution to this problem. please help !!
Hello @kalsi_k,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the carriage issue that you're experiencing on your HP Officejet J4680 All-in-One Printer. Thank you for including in your post that you have already checked for paper jams. At this point I am going to run your through some troubleshooting steps to specifically check the carriage path area within the printer. There is always a chance that a piece of debris or paper may have been missed when you checked for paper jams as even the tiniest piece of paper can cause these types of issues. Can I please have you follow the steps below.
To start, can I please have you click here. Once the support document opens can I please have you run through Solution two, Solution three, Solution four, Solution five, and Solution six. This includes any sub-steps under the listed Solutions. Please pay close attention to the carriage path area. Also, if you have already checked all the area in the printer for jams or debris you do not have to repeat those steps.
Please respond to this post with the result of your troubleshooting. Best of luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping! -
PCI wireless card does not work after restart - FM2-A55M-E33
Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
Does anyone know more about this issue?Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
I am unable to find any useful information in the logs.
Got any more suggestions?
Thanks! (And sorry to disturb so much) -
I have wireless mouse does not work with boot camp
i have wireless mouse does not work with boot camp
Did you install the correct driver for your Windows version? Are you saying the mouse does not work in Windows after Windows is installed?
-
I have had FPCX since Sept, first used Oct. I have not had one 'movie' export properly, first time since using FPCX. Audio stops completely at some point and does not re-start. Any ideas, folks?
First, I suggest you limit the subject line of your question to a few words which will help someone identify the problem you are encountering. Putting the entire question there looks as though you are shouting.
It would help anyone to identify your problem if you were to say what video codec (file format) you are using, and describe the method you are using in your attempts to export it.
You could also list any relevant error messages you encounter.
What version of FCP X are you using?
All these things will make it easier for people to help you.
Andy -
RAC does not start after trying to move storage
Hello,
We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
RAC does not start after we reformated the storage to RAID 10.
What we did:
1) deleted the database
2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
3) on both nodes
- recreated VotingDisk
node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
- tried to move OCR but was able only on one node:
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
These return ok for both node1 and node2:
node1:oracle$ cluvfy stage -post hwos -n node1
node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node Reachable?
node1 yes
node2 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
node2 passed
node1 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name Status
node2 not running
node1 not running
Result: Daemon status check failed for "CSS daemon".
Cluster manager integrity check failed.
Checking cluster integrity...
Cluster is divided into 2 partitions.
Partition 1 consists of the following members:
Node Name
node1
Partition 2 consists of the following members:
Node Name
node1
node2
Cluster integrity check failed. Cluster is divided into 2 partition(s).
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
WARNING:
CSS is probably working with a non-clustered, local-only configuration on nodes:
node1
Verification will proceed with nodes:
node2
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check failed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name Running
node2 no
node1 yes
Result: Liveness check failed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name Running
node2 no
node1 no
Result: Liveness check failed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name Running
node2 no
node1 yes
Result: Liveness check failed for "EVM daemon".
Liveness of all the daemons
Node Name CRS daemon CSS daemon EVM daemon
node2 no no no
node1 yes no yes
Checking CRS health...
Check: Health of CRS
Node Name CRS OK?
node1 unknown
Result: CRS health check failed.
CRS integrity check failed.
Post-check for cluster services setup was unsuccessful on all the nodes.
Please help.Thanks for the answer.
Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
You can see that cluster is not healty from cluvfy output.
When I tried to start crs whith crsctl start crs but:
- on node2 none of the demons starts (CSS, CRS or EVM)
- on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
Problem 2: Cannot change OCR location
node2:root$ cat /var/opt/oracle/ocr.loc
+#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
ocrconfig_loc=/dev/rdsk/c7t30d0s3
local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
node1:root$ cat /var/opt/oracle/ocr.loc
ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
local_only=TRUE
node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
Problem 3: On node 1 I wrongly issued a command
node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
Adding to inittab
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started -
After upgrading to OS 10.6.8, I cannot open Mail. I tried SecUpd2012-004.dmg which does not help.
I tried SecUpd2012-004.dmg which does not help. If anyone has a solution, much appreciated.
Mac OS X v10.6: Mail.app won’t open, or "You can't use this version of Mail…" alert after installing Security Update 2012-004:
http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US
Fellow user Grant Bennet-Alder offers this solution:
Some users have reported this problem if the Mail Application has been moved out of the top-level /Applications folder, or duplicated in another location.
When the Security Update is done, the old version of Mail is disabled.
The solution has been to:
1) make certain Mail is in the /Applications folder
2) There is no other copy anywhere else.
3) Once steps 1 and 2 have been done, Manually download and re-apply the Security Update (2012-004) by hand.
Security Update 2012-004 (Snow Leopard)
If the Mail.app has been LOST, it can be re-installed by applying the 10.6.8 version 1.1 combo update. But this update is quite large and it is usually not necessary:
Mac OS X 10.6.8 Update Combo v1.1 -
my mouse does not move or disappear when I am typing in my rogers yahoo account - the curser does. Since the mouse does not move, if I accidently hit the mouse pad or sometimes on its own it takes over and moves the typing to wherever the mouse is located. How do I correct this issue. I have Windows &
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
When I try to include a white and black photo in a iMovie the result is a black totaly black picture which does not show in the movie. Why? Can it be fixed?
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Other than that, what version of iPhoto do you have? Assuming 09 or later try
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD
P.S. Please don't type in block capitals. They are harder to read and on the forum it looks like you're having a tantrum -
Rented movie does not play after download if not connected to the internet
rented movie does not play after download if not connected to the internet
Hello b noir.
Thank you for your interest in solving my problem.
What I did I opened iTune. I read the information about what does my computener need to play back a rented movie. My computer is okay to play back rental movies. So I went to the iTunes store, I searched for the movie I want to watch, i singned in into my Mac account and I bought the movie. The movie started to download to my computer, it took some time because I bought a HD version, but it never stop and after a couple of hours or little less the movie was in the Rented folder of my iTunes and also I checked to be sure that was in the movie folder. So, next day I open iTunes and click on the movie, it opens but I wait for five minuetes and never started to play back, so I tried several time and I looked for info in different internet forums but I couldn't find anything that help. So I posted the problem in this forum and also I called Apple. Apple contacted me and they let me to download the movie again. So I did it and now I will watch the movie later. Not sure if the movie will play back normally or if I am going to have the same problem. I'll keep you posted.
Apple representative did not know why this happened.
Thanks.
Maybe you are looking for
-
IOS 7 on 4S - Camera problemes
I take photos with Camera app in iOS 7 on 4S and they don't show up in Photos app... In the bottom left of Camera app I see a thumbnail for the photo I just took but there are no photos in that album...
-
Recent iphone 6 photos do not sync on windows 7 photostream
Recent iphone 6 photos do not launch on windows 7 photostream
-
Change phot size to fit in a locket
How do I change a photo's physical size on iphoto to fit into a locket
-
RV180W Do not allow VLANs to communicate
Hello All! I just recently switched from the WRVS4400N to the RV180W. I have 4 VLANs, and I want VLANs 1, 2, 3 to communciate freely, but I DONT want VLAN 4 to communicate with anybody, just Internet access. On the WRVS4400N, I was able to do this us
-
I have buy apple 4 but i cloud is not sign in error "com.apple.appleaccount error 403"
i have buy apple 4 but i cloud is not sign in error "com.apple.appleaccount error 403"