Wireless WPA2 with IPAD 1

Hi
I have an IPAD 1 and i can´t connnect to my Wireless Network using WPA2-PSK.Only WEP.
My Wireless network is Cisco.
I tried in another Wireless network(Alcatel) and works without problem.
Is there any incompatibility between the Cisco equipment and the IPad 1?
Regards

Karen-
Try unplugging your WiFi router for a few seconds and see if that helps.
Fred

Similar Messages

Possible to use non-AT&T wireless card with iPad??

Thinking of getting an iPad, however I travel frequently and after looking at the outlandish prices for international data plans, I am about ready to give up on the idea. Anyone know if it is possible to use a non-AT&T wireless card with the iPad? I'm guessing there would be a compatibility issue of some sort.

The 3G iPad is not locked to a particular service provider. You can get a local Sim card and data plan in many countries. This article will give you some idea of what's available: http://gigaom.com/2010/05/10/ipad-data-plan-guide/

How to the wireless mouse with IPad 2

I bought the bluetooth wireless mouse for IPad, but unfortunately my IPad can't paired. Please assist

babs1 wrote:
I bought the bluetooth wireless mouse for IPad, but unfortunately my IPad can't paired. Please assist
Which Bluetooth mouse for iPad would that be?

Can I use apple wireless keyboard with ipad?

Well hello there,
I have a simple question to Apple Communities.
Can I use the Apple wirelless keyboard with ipad?
Does is it works fine?
I've never tested nor asked anyone.
Thank you guys.
Erick Felix

The bluetooth one, yes. You can.

How to set up a HP1102w for wireless use with iPad/Iphone etc

Hi,
I purchased the HP P1102w last year and it's certainly not out of the box Airprint compatible, in fact it is very fiddly, but the following takes about 10 minutes using a mac. The besuty of this is it works with my BT homehub also and probably any wireless router including Airport Express and Extreme and no need to have your printer sat near the router or use the USB cable. My iPad3, Wife's iPad2 and both iPhone 4's work beautifully too.
I spent several hours before discovering this solution and eventually sorted all of this out using the following:
Firstly you will need to go to the HP Support site and download the HP Driver Software for OS 10.7 Here:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-80684-5 &cc=uk&dlc=en&lc=en&os=219&product=4110396&sw_lang=
Once this has been installed to the HP 1102w using the USB, you then disconnect the printer from the USB and using your MAC connect to it using Network Connections (Click on the Wireless Icon in the task bar). The printer should be listed here under 'devices', (Note this will disconnect you from the internet!!!).
Once you are connected directly and wirelessly to the printer the blue light should stop flashing and remain constantly blue!!!
At this point go and make a cup of tea or leave the printer for about 3 -5 minutes before the next step to allow the printer to initiaite and provide and IP Address.
Next stage is to print a 'Self Test / Device Configuration' sheet from the printer. Do this by holding the red X button until the green light flashes on the printer (About 10 secs), when you release the printer should print a page with two columns on. The right hand column should state an IP Address. (if the printer is 'not connected' or 'initiating' try again in a few minutes. If the IP Address is 0.0.0.0 then the printer is not connected and recheck the blue light is not flashing (it should be permanently lit).
Now you have the IP Address, open safari and type in the IP Address eg.... 192.254.1.87 with no http or www. just the plain IP Address.
This should then open the control pages for the HP Printer Set up. These are green and white web pages.
Go to the Networking Tab (Nearly there, promise).... Click on 'Wireless' on the left hand menu and then in the new page that opens do the following:
Change from 'AdHoc' to 'Infrastructure'
In the next section 'Network Name (SSID)' - the name will be the HP name.... in the available network box select your home network and then press the little box that looks like this -- [<<]..... this should then change the 'current network name (SSID) to your home network (If your network is not listed just use the refresh button).
Last stage is to change the 'Authentification'
Change this to WPA/WPA2 (or other if your router is set otherwise) and in the 'passphrase' box enter the security password for your router and then finally save the changes....
After this all you then need to do is go to settings on your Mac - Printer and Faxes and remove the HP 1102w from the list using the - sign. Then click the + button to add a new printer and hey presto you will find the HP1102w with Bonjour.... simply add and then you can print from your Mac, Ipad and Iphone with no further tinkering....
I really hope this helps and you don't get as stressed as I did....
Happy printing...
Steve
ps. Why couldn't HP just tell you this!!!!!!

Hi pctiger92!
The WRVS4400N is now being handled by the Cisco Small Business Support Community.
For discussions about this product, please go here.

How to use shortcut keys on wireless keyboard with ipad

i just purchased an ipad 4 with a wireless keyboard and do not know how to use the function keys on the wireless keyboard to access the homescreen, scroll up and down, etc. please help with anything i need to turn on/off or download . thanks

If you have more than one keyboard active, you may be using a different one than you want. Use the "globe" key to make sure your virtual keyboard is set to Japanese Romaji or Japanese Kana. Which one do you use?
On the hardware keyboard, use apple/command plus space to switch between different keyboard layouts which may be active.

How to use wireless keyboard with iPad, How to use wireless keyboard with iPad

Do you have to have a Mac to setup the wireless keyboard. Can I use it directly with my iPad without a Mac.

What brand/model keyboard? Not all keyboards can be used.
http://www.tech-recipes.com/rx/5772/ipad-how-to-pair-connect-any-bluetooth-keybo ard/
 Cheers, Tom

Can not connect to wireless networks with ipad 2

My ipad used to connect to the wireless net at home and in public areas.
Now all by the sudden it can't "see" the network.
Message: " could not connect to wireless network"
I have tried "everything" also on different networks,
except resetting the modem.
My iPhone works, as do all my other computers.
Modem is Zyxel P2812

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Can I use my mac wireless keyboard with iPad?

I'm sure it will work - using my Apple wireless keyboard that I use with my laptop.... and use it with my iPad
Just wondering... would there be any problems or downfalls I haven't thought of?
Sounds like a dumb question
I've just seen a Belkin iPad keyboard advertised for £80 (more than the Apple wireless keyboard for laptops)
So I thought... there *must* be 'something' I'm missing?
Thanks
Omar

Yes it will work. However, you would need to delete it from one device before you attach it to the new device. Bluetooth devices may only be paired with one thing at a time (for obvious reasons).
Barry

Can I use my wireless keyboard with iPad?

I have an original old iPad. I also have a Mac Wireless keyboard.
Can I link to my my iPad? and how?

You can certainly try
1) on iPad: pull up Settings > General > Bluetooth
2) slide from Off to On (or On to Off, wait, then Off to On again)
3) on keyboard: hold down the power button on the side until the little green light flashes
4) release
5) on iPad: "Apple Wireless Keyboard" should pop up under "Devices"
6) if yes, tap "Not Connected" so it searches for a return signal from the keyboard
if no, try resetting/restarting your iPad (holding down the Home button and the Sleep button at the same time) and repeating instructions
7) on keyboard: send the iPad a return signal by pressing the Shift key

How to configure IPAD to connect Wireless (WPA2)

Hi Expert,
I've problem that I cannot configure IPAD connect Wireless LAN (Auth WPA2) so I don't know How I have to configure anything on Wireless Controller or I've to configure anything on IPAD. Please advise me sir.
Best Regards
Peera

Hi,
As I understood , you need configuration on controller side ... if that is the case... please follow below procedure ..
once you login to controller through GUI ... you need to select " Wireless " option
1) select wlan which you want to configure with WPA2 ...
2) you will get page with all details about corrousponding WLAN
3) select " Security " option in wlan option
4) once you click on security option , you will get option with WPA+ WPA2
5) select that option with what type of encryption you required ...
I believe you need wpa2 with personal edition. if so ... please select PSK with TKIP option .
once you do that , it will be activated from controller side for the respective Wlan ...
About IPAD ... you need to select wpa+wpa2 with psk and TKIP .... I do not have clear idea about IPAD ...

Can we use Apple tv to present with iPad wirelessly but no internet? if not, is there any other way?

Can we use Apple tv to present with iPad wirelessly but no internet? if not, is there any other way? Please tell me what's the best solution if I want to present what's on the iPad screen to TV or projector withtout using internet network or small range of bluetooth.

yes

I just set up the airport wireless modem - with a comcast internet router - all wireless device connect seemlessly (3 Iphones, Mac Air, and a Sony Laptop) but my IPAD 1 no longer connects. It tries to but never connects. I have reset it and have utility

I just set up the airport wireless modem - with a comcast internet router - all wireless device connect seemlessly (3 Iphones, Mac Air, and a Sony Laptop) but my IPAD 1 no longer connects. It tries to but never connects. I have reset it and have airprot utility app downloaded on my IPAD - it shows the modem and the internet no connected?

Do you mean an Airport Extreme Base Station connected to a Comcast Modem?

My iPad camera photos will wirelessly sync with my iMac and iCLoud photo stream, but the videos do not, is USB connection the only way to transfer videos or is there also a wireless method?

My iPad camera photos will wirelessly sync with my iMac and iCLoud photo stream, but the videos do not, is USB connection the only way to transfer videos or is there also a wireless method?

Videos are not included with the Photo Stream. Photo Stream is for photos only.
There is not a wireless method for importing videos from the iPad's Camera Roll.

Can't print to HP LaserJet Prof. P1102w_1 wireless printer with my iPad.

I cannot print to HP LaserJet Prof. P1102w_1 wireless printer with my iPad although it appears that this is a compatible printer. My computer prints to this printer. All other components of my wireless options and router are working.

Hi,
Did you updated the printer firmware?
The P1102w only support AirPrint with the latest firmware, not with the version shipped with the device.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03128524&cc=us&dlc=en&lc=en &product=4110396&tmp_track_link=ot_search
If you have any issues after updating the device please clarify your router brand and model.

Wireless WPA2 with IPAD 1

Similar Messages

Maybe you are looking for