Wishlist for the next X-Fi Audio Dri

Post here what you wish to see....maybe we can flip the coin
- Standalone Driver only for X-Fi Products
- Possibility to install per inf -File (no need for setup or coinstaller)
- maybe modular Setup
- Driver not bigger than 20MBs unzipped!
- No unneeded tasks/services like cthelper.exe, ctxfihlp.exe
- Small App to control the X-FI Mode like old Audio Console (~2MBs only!)
- Don't to forget EAX/OpenAL Support
- faster ASIO Response +Hz Selector
- monthly update (like Ati's Catalyst)
- Feedback Form (To much Spam in Forum)
- Vista Support
-Message Edited by HeadHunter2 on 03-02-200605:54 PM

pjc wrote:
) Add a +0 dB bass boost option for the LFE channel only,?since the current +5 dB bass boost can only be used when bass redirection is switched on. Some of us need the LFE boost, but not the redirection. 2) I don't know if this is a common problem, but when the speaker settings are set to large in the THX console, after restarting the pc,?frequencies below the crossover are removed from the main channels but don't get sent to the sub output; so you lose a load of bass. If this is a bug, it obviously needs to be fixed. 3) Revise the quick launch menu in the system tray. Perhaps add a quick way of changing the EQ, EAX environment?and mode rather than having to open up the console and mode switcher. Something like the menu you get with nvidia drivers that allows you to switch resolutions, antialiasing, etc without opening the display properties. 4) The ability to have different EQ settings for?headphone mode. When switching to headphones, the EQ settings remain the same as the ones used for speakers, but speakers and headphones need very different EQ settings. It can be troublesome having to go to the console and change the settings manually each time headphones are plugged in. This shouldn't be too hard since?different CMSS and Crystalizer settings are?saved for both headphones and speakers, so I would have thought different EQ settings could be?saved too.Message Edited by pjc on 03-03-2006:02 AM
Item ok yeah i agree seems daft not to include the LFE boost?but not to important for me
Item 2 seems to be so true, i have large speakers set in thx console and i lose all my bass on restart, i thought my speakers were going bad tbh.
?Item?3&4 ?would be great too, having to fiddle with the eq settings just because you use headphones at night, at the same time having the mode switch is a waste of time, half the time it causes problems other times its a downright PIA to have to choose a mode for your soundcard each time you start a new app?Its 2006 not 980 we shouldnt have to tell our? pc,s to switch a soundcard into a different mode just because we are going to be playing a game.

Similar Messages

  • 2010 iMac 2.93 i7 27" or 2011 2.8 i7 21.5" - which will suit better long-term?  I do a fair amount of audio, video editing and photoshop, but I have a limited budget.  What's going to give the best bang-for-buck for the next 3-5 yrs?

    I do a fair amount of audio, video editing and photoshop, but I have a limited budget.  What's going to give the best bang-for-buck for the next 3-5 yrs?  My current machine is a 13" Macbook unibody 2.4 Core 2 Duo w/ 4Gb Ram so it's time to move forward with more power and screen real estate!

    Hello, Jeff
    I could never edit on a 13" screen. I'm currently using a 17" MBP i7 Early 2011 as a fast replacement to my aged 20" Intel iMac.
    Both systems are not that far apart on stats and you will find that processing HD video will rely highly on the read/write to your storage. Myself, I'd be eye balling the 2011 for the Thunderbolt port so HD Video export/compression doesn't take forever! Currently processing a finished HD project for DVD uses at most 20% of my total CPU capacity. The FW800 drive is the big bottleneck! (I know I need at least a RAID to see a real speed boost).
    How good your eyes are and your usage style would dictate if the difference in screen size make a difference to you.

  • The Nordins - Options for the next time you need a customer!

    The headline is from an email we received: "Verizon - Options for the next time you need customer service!"  Well, we changed it, just slightly.   Well, on 6/20/2013 we had the TV down; it was said to be a piece of video equipment that went down.  We could not get anything on the TV until next day.  The sad part is that we were watching the Heat-Spurs game and it quit just 1min-36sec. prior to the end of the game.  Then, we could not watch our daily Netflix show we watch every evening before going to bed.  So in calling twice, we found out about the video equipment problem.  But typically Verizon, they replaced the equipment and thought nothing about the customer that actually lost the reception!!  How about crediting us for the time "off the air".  You can't have the cake and eat it too.  Then, Verizon sends us emails about the bill, customer service, etc. but there is no way for us to email them back!!  Why do they think my time is less valuable then theirs; having to call their customer service and to wait a long time for answer by someone in "God knows where country".  What does that tell you about the customer service commitment!  It's like, yeah you are one of the slob users that keep paying the bills for lousy service.   Perhaps it's time for all of us to switch off our TV's for one or two days a week and not pay them for "our time off the grid".  Having some couple of thousand TV's off twice a week may shake them up a bit.   So here is my idea.  Establish an email address where we can reach anyone in customer service directly, in our own state, not somewhere 1000 and more miles away.  Additionally, if something is down, does not matter what time of the day, stand up for it and give the customer their credit due.  Thanks for reading

    It all depends how you use it.
    Once the initial break in period is over, like the first year, it should run just fine as long as you don't abuse it, don't let it overheat, keep the dust out etc.
    Do get the AppleCare as it's very expensive to repair a Mac.
    Some tips:
    1: Avoid using the built in keyboard and trackpad as much as possible. I know what's the use, but it's these too area's, the USB ports and the Superdrive that experience the most wear and tear.
    2: If you do use the built in keyboard, take off your watch and jewelry, it scratches. mars, reacts with the case and discolors it.
    3: The keybord is a bit weak compared to regular PC desktop keyboards, so use a wireless one, but have a wired one around for emergencies. The keyboard collects dirt, grime, hair, dust etc, underneath, you might want to have a light cover over the keys but still let air get underneath.
    4: Be gentle with the audio ports and the Superdrive, don't use your computer for watching DVD's. The Superdrive is important for recovering the machine with the installer disk which also must be well taken care of.
    5: A GOOD case, like a MacTruck or a padded one will absorb the shocks if dropped while transporting.
    6: The biggest concern is other people, they just don't handle things with care because it's not theirs and they are ignorant or even spiteful of the money you spent to have a quality machine.
    7: Clone your boot drive to a external regularly, in fact have two, one staggered back in time a few weeks, it's hold option bootable in case your hard drive dies. Free cloning software like Carbon Copy Cloner or the commercial version Superduper does the job well.

  • The next screen's audio starts playing when the current screens audio has finished

    So I've added audio to a few screens and on the first couple it works fine. I have added a mute button and that's all, I just want the audio to play to the end then stop on each screen. It does that perfectly on the first few screens and then at a certain point, when the audio for that screen has finished, it plays the audio for the next screen, and the next, and so on even though I haven't moved on. I can't work out why it's doing this! Sure someone can explain what I've done wrong. Using Captivate 8.0.1...

    I adjusted them on one screen and it      worked - you've solved my problem again -  Thank you!
    Is there a way I can make my audio files load up like this automatically?

  • I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

    I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

    See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
    tt2

  • HT1918 I would like to change the data of my credit card. For the next year I live in Germany, I have a geman visa card, but I want the itunes and everything to be in english language. How can I do this?

    I would like to change the data of my credit card. For the next year I live in Germany, I have a german visa card, but I want the itunes and everything to be in english language. How can I do this?

    You cannot.

  • I need to start and stop logging based on a digital input event(or analog if necessary), log data for several seconds prior to the event, and have the data file close at the end of event and increment the filename for the next logging event.

    I don't know if this can be done with VI Logger or need to use Labview V7.1.

    After browsing through the VI Logger User Manual, it looks like the triggering that you are hoping to accomplish is possible. However, incrementing the filename for the next logging event is not going to be possible. VI Logger does exactly what its name tells - logs data. I don't think the automation that you are hoping to accomplish is possible.
    For help with setting up your application, if you do choose to stay with VI Logger, make sure to chek out the Getting Started with VI Logger Manual.
    Best of luck.
    Jared A

  • A suggestion for the next upgrade.

    When I want to separate my iPod I of course select the "eject" on the screen. However there are times when I just want to eject and keep the iPod connected (recharging, seeing what's on the iPod since the new upgrade took that away, listen to my tunes that won't skip). If I want to reconnect though I have to physically remove the cable and reattach. For the next upgrade couldn’t you have an icon at the top that shows the status of the iPod, say a pair of plugs connected and in blue, then when disconnected they’re separate and in yellow, so that if I wanted to reconnect I can just press the icon and it reconnects through software? Thanks.
    meagain.

    it's possible to make itunes enhancement requests directly to the Apple folks nowadays. here's a link through to the relevant itunes feedback form:
    iTunes application feedback

  • I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?

    I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?.

    I'd wait. What can't you do that you need? You mean you want to buy a new model, then why not wait for an actual new one, not the two year old 5,1, when you need to and have outgrown.
    Yours will run Mountain Lion. yours is 4 yrs old and still supported and has life left.

  • How can I use my Mac OS X for the next time

    Dear sir,
    Please, I need your help about Mac OS X and how can I use the OS for the next time I mean when I'm going to format my computer or to use for the another computer.
    By the way... I already installed the Mac OS X to my MacBook Pro so please I'm waiting for you advice.
    Mohammed Hussein

    Hi,
    He bought the iMac two years after mine.
    Would his Mac still be under warranty? It sounds like it is about only a year old and so may be still eligible for phone support, though that may depend on having nearby access to an Apple Tech support.
    He could get a replacement disk sent to him as well. The cost,  I don't know.
    Your disk would probably work, but you don't need to burn one; just use yours. If you are in two locations, then it would be better for Apple to mail him a replacement disk for his particular Mac.

  • Using  the current version of photoshop CC with Mac OS 10.9 for the next 5 or so years on same mac?

    I am intending to upgrade to photoshop CC from photoshop CS6, my concern is is my computer is 6 years old and probably I will not be able to upgrade to a later mac operating system as I have mac os 10.9, and I may not be able to upgrade to a future version of photoshop, will I be able to use the current version of photoshop CC with Mac OS 10.9 for the next 5 or so years on same mac?, I know I can do this with Photoshop CS6.

    There's no reason why you can't do both.  You will always have CS6 to fall back on if the need should ever arise, the same as most of the regular posters here.  But you could enjoy CC for as long as it suited you, and it has some very features and more are coming all the time.
    We've seen two nice updates to Photoshop CC in the eight months since the subscription model went live.  (Have I got that right?)  So we can expect three a year or more, and there were some killer new features in 14.2.  Heck, it would already break my heart if I had to go back to CS6.  In another four years...   It ain't gonna happen.

  • SEVERE: An error occured while scanning for the next trigger to fire

    Hi All,
    I followed below steps to configure Oracle BI publisher scheduler on oracle 10g database.
    1.Log in to BI Publisher as a user with Administrator privileges and select the Admin tab.
    2.Under System Maintenance, select Scheduler Configuration.
    3.Enter the database connection information for the target Oracle database and user.
    Database Type: 10g
    Connection String: jdbc:oracle:thin://<hostname>:<port#>:<oracle SID>
    Username/Password for the database user
    Database Driver Class: oracle.jdbc.driver.OracleDriver
    4.Click the Test Connection button to make sure the connection information is valid.
    5.Click the Install Schema button to install the scheduler tables.
    6.Restart the BI Publisher application.
    The Schema installed successfully.
    But when I am starting the weblogic server I am getting below error and BI publisher application is not getting up.
    INFO: Handling 6 triggers that missed their scheduled fire-time.
    23-Dec-2011 05:29:38 org.quartz.core.ErrorLogger schedulerError
    SEVERE: An error occured while scanning for the next trigger to fire.
    org.quartz.JobPersistenceException: Couldn't acquire next trigger: Couldn't retrieve trigger: Invalid column name [See nested exception: org.quartz.JobPersistenceException: Couldn't retrieve trigger: Invalid column name [See nested exception: java.sql.SQLException: Invalid column name]]
    at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1773)
    at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
    at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
    * Nested Exception (Underlying Cause) ---------------
    org.quartz.JobPersistenceException: Couldn't retrieve trigger: Invalid column name [See nested exception: java.sql.SQLException: Invalid column name]
    at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveTrigger(JobStoreSupport.java:1126)
    at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1759)
    at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
    at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
    * Nested Exception (Underlying Cause) ---------------
    java.sql.SQLException: Invalid column name
    at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
    at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:263)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:271)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:445)
    at oracle.jdbc.driver.OracleStatement.getColumnIndex(OracleStatement.java:3372)
    at oracle.jdbc.driver.OracleResultSetImpl.findColumn(OracleResultSetImpl.java:2009)
    at oracle.jdbc.driver.OracleResultSet.getBinaryStream(OracleResultSet.java:668)
    at org.apache.commons.dbcp.DelegatingResultSet.getBinaryStream(DelegatingResultSet.java:233)
    at org.quartz.impl.jdbcjobstore.oracle.OracleDelegate.getObjectFromBlob(OracleDelegate.java:154)
    at org.quartz.impl.jdbcjobstore.StdJDBCDelegate.selectTrigger(StdJDBCDelegate.java:2382)
    at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveTrigger(JobStoreSupport.java:1115)
    at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1759)
    at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
    at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
    23-Dec-2011 05:30:55 org.quartz.core.ErrorLogger schedulerError
    The system details are as below :
    BI Publisher version : 10.1.3.4
    Oracle DB : 10 G
    Weblogic server :10.3.2
    Please suggest to resolve this issue.
    Thanks,
    Sachin

    Hi,
    This errors occurs if you have configured some schema for the scheduler and configured it on BIP, but the configured schema is no longer available.
    That is why I am suggesting you to replace the current quartz.properties file with the original file that exits during installation.
    Then try to start the server, and see if the server starts without error.
    After that you can try to configure the scheduler from BIP console.
    thanks,
    sandeep

  • HT1212 My daughter's ipod touch is disabled for the next 43 years. Any hints on what she may have done to cuase this and how to fix it?

    My daughter's ipod touch is disabled for the next 43 years. Any hints on how to fix this? I have followed the steps listed on the apple website to p lace it into recovery mode, but the ipod is now "stuck" on the connect to itunes part. Thanks!

    Sounds like a case of entering an incorrect passcode over and over.  Only fix is to follow the instructions in that article you reference, HT1212, and it may take a couple tries to get it to work right.

  • I want to buy a new laptop so my question is should i buy the new 2013 macbook air 13in or wait for the next model (june 2014) ?

    This will be my first mac laptop, so my question if i am goin to miss a huge jump in the specifications for the next year release or not ?

    We know there will eventually be a new MacBook Air (though the terms of use here prohibt speculation about it). We have no idea when it will come out or what it's specs will be. Retired Engineer's advice is exactly the same as mine. If you need a computer now, buy it. It is a powerful computer and except for the fact there's no 2TB SSD available (not that I could afford it if one existed) it could be my one and only computer. If you merely want a new computer, wait until you need one.

  • Hi,i just bought the Creative cloud membership and i would want to know why is t one year policy and you payed alot of money and still pay for the next month? Annual means yearly right ? why do i have to pay another next month.

    Hi i just want to know i bought the creative cloud and photoshop and premiere. All those and it said annual meaning i have to pay for the next year right? But why did it said that i have to pay for the next month? What happens  when i didn't pay the next month ?

    You may buy an annual subscription and pay monthly, or a straight monthly subscription... and, being a subscription, if you stop paying the software stops working
    If you want a one time payment, and you can use 3+ year old software, go to Creative Suite 6

Maybe you are looking for