With a new iMac i can't print wirelessly to my existing HP or Epson printers. They currently work thru wireless network with my windows desktop. Both printers get the same error: printing job not accepted. They appear ro be recognized by the Mac. Help!
I've looked at many threads and tried suggestions from this site with no success. Neither printer (HP 1010 and Epson Artisan 810) are Airprint supported. in checking the printers via the imac in System Preferences the printer 'kind' is listed as Airprint. I've tried to change with no success. So yes- I need some experts help and suggestions!
Hello HappyHips,
It sounds like you are getting this error message when trying to print to a Wi-Fi printer. I want to recommend the troubleshooting in this article named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
Regards,
Sterling
Similar Messages
-
after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe -
the disk you inserted was not readable by this computer. (when putting ipod into mac) help,. now have no music on my ipod. how do i sort this out?
- Verify the file and disk formats on your camcorder and on your friend computer whether they support what you want to do. Also, if you are using a specific application to do the task, you may need to verify an application whether it supports the file format (e.g. MPEG4, Apple Intermediate Codec).
- Verify the device cable type whether Mac OS X 10.4.x supports.
- Verify the device compatibility with Mac OS X 10.4.x.
- Check an available firmware or driver for the camcorder that has developed after Mac OS X 10.4.4.
- Try diagnosing and repairing local hard disk and camcorder's drive directory.
- Verify disks permissions issue.
- Verify whether the disk is TOO warm or cold to read.
- If every troubleshooting does not solve the issue, consider to reformat the camcorder drive.
You may try suggestions by Dale Weisshaar: http://discussions.apple.com/thread.jspa?messageID=1206250 -
When I send an imessage on my ipad to someone, my husband also gets the message, even though he was not selected as a receipient. This just started when I got my ipad and sent a message for the first time. As a side note, my daughter received an itouch and both my husband and i were getting all messages she sent, no matter which one of us they were sent to. I turned her imessage off. We have all of our devices under the same itunes account so that we can share all music and apps. How can we get around this? I do not want him receiving all imessages that I send, this will get very annoying to him.
You can have a separate AppleID only for iMessage and keep using the other one for iTunes.
Just change the AppleID used for iMessage in Settings > Messages > Receive At -
Still getting the same error message, "could not allocate a resource"
I tried to sync both my iphone4 & ipad2, at different times yesterday & today. The message from iTunes is, could not connect to this ipad/iphone. "Could not allocate a resource".
So i did try earlier today the information that was provided to me to try to delete the contents of the Lockdown folder. Which i did do, with no positive outcome after that process, so i went ahead & delete the itunes file completely & downloaded a new version, but still no luck. I am getting the same message of
"itunes could not connect to this iPad. Could not allocate a resource." Please help, Thank YouThere is a License Recovery script that uses Terminal.app (just enter that in Spotlight).
It also helps to do this in a admin account or to have your account with Admin privileges.
Now go to this link: Error 150:30, Nothing works. Help plz and carefully follow the instructions in message 5.
Before you enter your password, the screen should look like the example.
Let me know how it goes.
Gene -
Yes, I know I have a 7 year old iMac with a stone-age CPU.
Yes, I know the OS X 10.4 is outdated.
Yes, I am aware that my version of Firefox is no longer supported.
Yes, I know that some of the plug-ins are outdated.
But the system works well enough for me, believe it or not, and on this hardware newer versions just don't work. So why remind me every time I refresh the browserpage of these obvious facts? This is extremely annoying, very user-unfriendly.... (I almost used words that should never be used in the public space.)
This way of pushing people into abandoning something that is still perfectly workable does in my mind not correspond with the values that Apple and/or Mozilla say to maintain, things like "focussing on user satisfaction" and "taking care for the environment".
Please tell me how to switch off these messages. Do not suggest me to install Ubuntu on my Mac. I am about to do that already.
Thanks in advance, fellows.
P.S. Those nasty people that might try to hack my machine do not need to know which plugins and versions are on it, so I don't list them here. If they bother to find out, they probably know more details already than I can provide.Also, for program update reminders, you could try:
Firefox > Preferences > Advanced > Update - set to "never check"
If that doesn't work, I believe there is a little update history file you can delete, but I'd have to search for more info on that. -
I work in an international company and we have a server farm with 54 servers, so I need check content in all of them for 118 countries, I created a little application to do this and the problem is this:
When I check the url in the main window I get: "Error: ssl_error_bad_cert_domain" but there is "add exception" option and the problem ends there. But my application loads the pages within an iframe and when I try to load them the error appears but there is not any option to continue.
Could you tell me please which option of the configuration (about:config) I should change to avoid this, because adding an certificate for every country for every server (6372 certificates) it's not an option for me.
*Note: The error appears because the dns of such servers have several subdomains and the certificate is not valid for the resultant url.Facebook uses such servers to store additional content media files and maybe CSS and JavaScript files.
Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode -
every time i boot is like groundhog day, i keep getting the same programs and system settings that either have closed or modified, like dock magnification, programs saved on the dock, etc.
every time i boot is like groundhog day, i keep getting the same programs and system settings that either have closed or modified, like dock magnification, programs saved on the dock, etc.
-
Communication error, user "did not accept your invitation"
I think need some help. I have read many of the topics, however i have not been able to address my issue. Let me start by saying I am new to Macs (about 3 weeks) and not very technical. I have a Imac and also running time capsule as my wireless connection. As instructed i obtained an AIM account and attempted to do video chat, however when I try i get a communication error, user "did not accept your invitation". I have spent about an hour with apple tech services and have been able to successfully connect to the Apple test buddy. In fact my friend was also able to connect to the Apple test buddy. I have not tested a connection with anyone else.
I would greatly appreciate any help with this issue.Hi Thank you for responding,
The message says that there was a communication error - did not receive response from the other person. On the other side they received the same error. Below is the error log
Yes, Time Capsule sits between my modem and my computer. I also have a Voice over Internet phone.
The entire set up is as follows.
Internet modem (make; Ambit) to Voice over Internet Modem to Time Capsule (set as router - share a single IP address using DHCP & NAT)
as for setting up time capsule - i set it to "i don't have a wireless network and wanted to create one"
I have not attempted to reach anyone in table 2 - I will do so and let you know
my error log -- again thanks for your help
Date/Time: 2008-03-27 20:46:00.255 -0400
OS Version: 10.5.2 (Build 9C7010)
Report Version: 4
iChat Connection Log:
2008-03-27 20:45:25 -0400: AVChat started with ID 2073701542.
2008-03-27 20:45:25 -0400: loopie5331: State change from AVChatNoState to AVChatStateWaiting.
2008-03-27 20:45:25 -0400: 0x14ae87f0: State change from AVChatNoState to AVChatStateInvited.
2008-03-27 20:45:35 -0400: 0x14ae87f0: State change from AVChatStateInvited to AVChatStateConnecting.
2008-03-27 20:45:35 -0400: loopie5331: State change from AVChatStateWaiting to AVChatStateConnecting.
2008-03-27 20:45:55 -0400: 0x14ae87f0: State change from AVChatStateConnecting to AVChatStateEnded.
2008-03-27 20:45:55 -0400: 0x14ae87f0: Error -8 (Did not receive a response from 0x14ae87f0.)
2008-03-27 20:45:55 -0400: loopie5331: State change from AVChatStateConnecting to AVChatStateEnded.
2008-03-27 20:45:55 -0400: loopie5331: Error -8 (Did not receive a response from 0x14ae87f0.)
Video Conference Error Report:
17.607834 @SIP/SIP.c:2719 type=4 (900A0015/0)
[SIPConnectIPPort failed]
19.608154 @SIP/SIP.c:2719 type=4 (900A0015/0)
[SIPConnectIPPort failed]
Video Conference Support Report:
0.523429 @Video Conference/VCInitiateConference.m:1582 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
9.592914 @Video Conference/VCInitiateConference.m:1597 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
9.600060 @Video Conference/VCInitiateConference.m:1701 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
15.607906 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK5e75a87f218371dd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=300068541
Call-ID: 4a78f1f6-fc60-11dc-80cb-9299630c4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 731
v=0
o=Aldo 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
16.108265 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK5e75a87f218371dd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=300068541
Call-ID: 4a78f1f6-fc60-11dc-80cb-9299630c4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 731
v=0
o=Aldo 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
17.108616 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK5e75a87f218371dd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=300068541
Call-ID: 4a78f1f6-fc60-11dc-80cb-9299630c4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 731
v=0
o=Aldo 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
17.608293 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:32768;branch=z9hG4bK757dcfb6358328fd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=2081639093
Call-ID: 4baa518c-fc60-11dc-80cb-ea4e74ce4012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:32768>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 725
v=0
o=Aldo 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 32768 RTP/AVP 110 121 12 3 0
a=rtcp:32768
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 32768 RTP/AVP 123 126 34
a=rtcp:32768
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 32768 VIDEO 32768
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
18.108636 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:32768;branch=z9hG4bK757dcfb6358328fd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=2081639093
Call-ID: 4baa518c-fc60-11dc-80cb-ea4e74ce4012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:32768>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 725
v=0
o=Aldo 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 32768 RTP/AVP 110 121 12 3 0
a=rtcp:32768
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 32768 RTP/AVP 123 126 34
a=rtcp:32768
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 32768 VIDEO 32768
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
19.108980 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:32768;branch=z9hG4bK757dcfb6358328fd
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=2081639093
Call-ID: 4baa518c-fc60-11dc-80cb-ea4e74ce4012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:32768>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 725
v=0
o=Aldo 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2800
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 32768 RTP/AVP 110 121 12 3 0
a=rtcp:32768
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3538228969
m=video 32768 RTP/AVP 123 126 34
a=rtcp:32768
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 32768 VIDEO 32768
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1659256788
Video Conference User Report:
0.000000 @:0 type=5 (00000000/16402)
[Local SIP port]
19.715397 @Video Conference/VideoConferenceMultiController.m:1474 type=5 (00000000/0)
[IP And Port Data With Caller IP And Port Data: Obtained 120 bytes of local IP and port data (3 entries). Remote data was 0 bytes (0 entries).
B
Message was edited by: aldoz -
I upgraded my itunes to 10.6 and now I get the error "The software required for this iPhone is not installed correctly. Please reinstall iTunes to install the required software." I get the same error on my iPad. I've tried uninstalling and reinstalling. Please help!!
Edit: 10.6.3. I have uninstalled using the uninstall programs on itunes and then I downloaded again from the itunes website multiple times. This is not resolving the issue. The phone shows up in My Computer.
-
How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac? I've changed from a Macbook to a iMac because that one stopped working and I cannot use it anymore. I've been able to import all the data of the last backup of the Macbook when setting the new iMac, but I cannot access now to the old backups of the Macbook and there are information that wasn't in the last backup and I would like to recover. Thank you very much.
Yes, you can ..
Read Q17 here.
http://pondini.org/TM/FAQ.html
Strongly recommend his whole section.. 14-17 and read it carefully to understand the ways you can make TM work for you. -
I just got an iPhone 5S, now when I try to use my old iPad the apps won't work because they are syncing with my new phone. Can I have the same account for an old iPad and a new iPhone?
Connect your iPad to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
HELP!! I can't sync my iphone 3GS with my new Imac.
I can't sync my iphone 3GS with my new Imac, so I can't download my apps to make a backup.
I fixed it!! I just had to authorize the new computer hihi
-
Now in iCloud with new iMac. Can't get mail on my iPad now
Now in iCloud with new iMac but can't get email on my iPad. How to install?
Ummm... Settings --> iCloud
-
i can't seem to get my iPad to synch with my new iMac. The iTunes prompt says that this computer isn't authorised although i have registered it on iTunes. Any other ideas for how to overcome this block?
What do you mean by 'registered it on iTunes' ? You've authorised your account on your Mac's iTunes via the Store > Authorise This Computer menu option ? And you've copied your library onto the Mac ?
Copying content between computers : http://support.apple.com/kb/HT4527
You may also find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141
Maybe you are looking for
-
Interactive alv report......with one table having more than 2 foreign key
*& Report ZRAHUL_ALV_SFLIGHT2 REPORT zrahul_alv_sflight2 NO STANDARD PAGE HEADING. TYPE-POOLS slis. DATA: fcat TYPE slis_fieldcat_alv, it_fcat TYPE slis_t_fieldcat_alv, fcat1 TYPE slis_fieldcat_alv, it_fcat1 TYPE slis_t_fieldcat_a
-
I'm creating a form with 20 questions and 10 possible answers to each question. I would like to find out how to validate that each question has been answered. I created the questions within a table but I don't jnow how to valdate the entries? Thanks
-
"Page not found or not available" error when accessing workitem from UWL
Hi SAP Gurus, I encounter a perculiar problem in our portal system, was wondering if any of you guys encounter it before. When one of the users accesses the UWL screen and click on a particular workitem(approve trips), he gets a portal error message
-
HT1351 cant find the SUMMARY TAB on my Itunes
Cant find the SUMMARY TAB on my ITune
-
IPod Nano 6G power/hold broken and still under warranty...
Can I get it replaced/repaired at an Apple Store?