With and without modification assistant

when we do upgrade and in teh upgraded version we can find some objects under modification assistant and some under without modidfication assistant when we run the tcode SPAU..as an abaper what is that we have to do with those objects..Could any one let me know the steps that i have to do with those objects??

check.. may be useful...
We have received many errors and it was really pain to go thruogh each and every error....top of that APO is not giving you vary specific error or some times there are no verbitze for the error..
Follow the steps below will help you lot
Extract the time series to an Info cube before the upgrade
Upgrade the system
De-initialie and Reinitialize the DP/SNP Planning area
Reload the Time series following the upgrade
Adjust the Like profiles
If Old like profile to be used then must assign the planning area to every like profile
If Existing LIKE profile cannot be assigned to several planning area, You must create the LIKE profile for second planning area manuallt with new name
Adjust the Phase-In/Out profile
If Existing Phase-In/Out profile cannot be assigned to several planning area, You must create the Phase-In/Out profile for second planning area manuallt with new name
Adjust the assignment table ( /SAPAPO/FCST_LC was replaced by /SAPAPO/FCST_LC1)
Activate all Infocubes by executing the RSDG_CUBE_ACTIVATE report
Check/Adjust the palnning area Data source
Convert the Note Anchor tables - Execute /SAPAPO/TS_NOTES_CONVERT_40 Report
If inconsistence - execute /SAPAPO/TS_GEN_DOCTAB_CHECK report
Check the converted notes for interactive planning
You must create the DB tables for the planning object structure/planning area - using taransction /SAPAPO/RLGCOPY
Realignment and copying steps must be stored in new DB tables
Adjust planning object ID with /SAPAPO/TS_D_OBJECTS_COPY

Similar Messages

SAPU with and without Modi As..!

From which table and with what filter we can get the list of with and without modification assistance objects which will get listed in SAPU?

Hello Dhamodaran,
You can do it by simply selecting the check boxes in the SPAU transaction. In the SPAU Transaction screen you will be able to select objects which can be modified with and without modification assistant.
If you are trying to download this list you can so it by System->List->Save.
Thanks,
Sai

SPAU issues with: Without Modification Assistant: No versions found

Hi,
We have upgraded from SAP 4.7 to SAP ECC 6 with Unicode.
After the upgradation we have started working with SPAU objects.
Currently I am working on SPAU: Without Modification Assistant.
I have gone though some docs in those they have asked to compare the versions using Version Management options.
But when I am tiring to check the Version Management for many of the objects I am getting the message: No versions found
Some of the objects are for which I am getting the message No versions found are as follows :
Selection Views : SAPBRFSTANDARD 100789 23.12.2010 ABCK900506
Programs :RM06BF00 Collective Release of Purchase Requisitions
Transactions FEBA A_1234 13.07.2006 XYZK906487 Postprocess Electronic Bank Statmt
Transaction Variants O4_TIGER1 D_ABCD 18.06.2005 AB5K901250
Screen Variants O4_TIGER1_0999 D_ABC 18.06.2005 AB5K901250
Message Classes 38 General Basis: ABAP Runtime Environment
Maintenance and Transport Objects J_1IEWT_ACKNS D_ABCDE 27.06.2008 ABC3910542
Request you to check and let us know how to proceed.
Thanks and Regards,
Prem.
<personal information removed by moderator>
Edited by: Thomas Zloch on Jan 18, 2011 12:43 PM

Hi,
in SPAU you will be getting three things..
1>Green light 2>yellow light and 3>Red light
when the upgrade takes place if you see any object under Green that means the changes are automatically carried to the new version from older version
for yellow it has done partially and for red you need to do manually copying the code to the new version.
You have an option is "RESET to original" if you do this , the code will be reset to what SAP provided in the new version. Your old code won't be there.
Please go through the below link to understand about SPAU and SPDD.
http://help.sap.com/saphelp_nw04s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
Regards,
Nagaraj

Adjustment using SPAU for Objects Without Modification Assistant

Hi
How to adjust Objects under Without Modification Assistant.
For example if there is an issue with custom program or BAPI, do I have to manually edit them and adjust to old version.
Cheers
Senthil

Hi,
Tcode SPAU is for adjusting programs and Function Modules.
http://help.sap.com/saphelp_nw04/helpdata/en/2e/6d66617d9011d396b60000e82de14a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
SPAU - for repository Objects Changes
see the doc
SPAU
http://www.sap-img.com/bc018.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/068d380be34e6ce10000009b38f842/content.htm
http://help.sap.com/saphelp_46c/helpdata/EN/60/d6ba7bceda11d1953a0000e82de14a/content.htm
Please find below, answers to your questions:
1.What objects will come in SPAU and SPDD?
Ans: All the objects which are modified, after tansporting to the current system,
will be listed in SPAU and SPDD. SPDD contains the list of all modified Data Dictionary objects, like tables, dataelements, domains,view...etc. The rest of all the modified repository objects will be listed in SPAU.
What happens to the modifications done in the older version when we upgrade the version? (with Modification assistant and w/o)
Ans: After the initial upgrade happens, we have to do adjustments from SPAU/SPDD to maintain or reset the changes. That is, from the list of objects in SPAU/SPDD, you have to either carry forward the changes to the new version, by choosing the option ADOPT CHANGES (available on right click) or RESET TO ORIGINAL (available on right click).
Will they come in these transactions?
Ans: yes, they will be listed in these transactions, after the BASIS updgrade activity.
And what if we apply some patches(Notes) to the system? What is the impact of these patches to the SPAU transaction?
Ans: Patches will be supported by the version upgrade. In case of notes, we have to verify whether these notes are supported by the new version (you can go into http://www.service.sap.com/notes to verify this. Also, we have to analyze whther the code in the note is already incorporated in the new version. In this case you can ignore the chanes choosing RESET TO ORIGINAL option
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2e/6d66587d9011d396b60000e82de14a/frameset.htm
If you have applied any OSS notes to objects in your system, the hot package may overwrite these objects.
SPDD is used to identify dictionary objects
and
SPAU (repository objects), will identify any objects where the hot package is overwriting changes you have made through OSS notes.
You must check all objects identified in SPAU and decide whether you need to reapply the OSS note or reset the code to the original SAP Code.
Also once the changes have been done you would see a green traffic light.
If you double click on the modified object it will show you a split window where on the left you will have the original version and on right the modified version. So you can choose which to keep and which to reject. You may keep the modified version incases where you know that the notes will only be pakages in the next version.
http://help.sap.com/saphelp_47x200/helpdata/en/2e/6d66647d9011d396b60000e82de14a/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/2e/6d66647d9011d396b60000e82de14a/frameset.htm
http://www.sap-img.com/bc018.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/068d380be34e6ce10000009b38f842/content.htm
http://help.sap.com/saphelp_46c/helpdata/EN/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://www.sap-img.com/bc018.htm
http://www.sappoint.com/oss/spamspau.html
http://help.sap.com/saphelp_nw04/helpdata/en/fe/4b284837bf11d5b3bf0050dae02d7c/content.htm
http://help.sap.com/saphelp_webas620/helpdata/en/83/7a18ecde6e11d195460000e82de14a/content.htm
http://64.233.167.104/custom?q=cache:nJasGnXhh4sJ:www.asug.com/client_files/Calendar/Upload/SAP%2520Upgrade%2520Lessons%2520Learned.ppt+spau(SAP)&hl=en&ct=clnk&cd=5&ie=UTF-8&client=pub-3723304925932908
Also the following link is very good
http://www.sapgenie.com/basis/starter.htm
Regards,
Naresh

Spau without modification assistant

Hye all,
Im into upgradation project, In spau tcode > without modification assistant> programs, when im going for version management its displaying some 10 modified versions of tht program, now my Q is that from tht versions which i have to keep in my new version?
Full points will be rewarded.
Thanks,
Vibha

hi,
you have to compare with the version which is existed currently in Production(old version) and the latest one.
sudheer.A

WITHOUT MODIFICATION ASSISTANT

what exactly does without modification assistant do and how different is it from with modification assistant.
please give more emphasis on without modification assistant part.
it's urgent

what exactly does without modification assistant do and how different is it from with modification assistant.
please give more emphasis on without modification assistant part.
it's urgent

Modification assistant vs without modification assistant

Hello All,
Can any one explain what is the difference between them?
Thanks,
Vibha

hi
Modifications With the Modification Assistant
If the object has not been adjusted in transaction SPAU, a traffic light appears in front of the object. In the Modification Browser these objects are highlighted. When using Reset to original the active version on the database is confirmed as the new original version. The object remains unchanged. Only the modification data is deleted. When using Modification adjustment the version imported in the last upgrade or Support Package is saved in the modification logs as original. In addition, there are the modifications from the adjustment. The Modification Browser (transaction SE95) gives an overview of these modifications.
If the object has been adjusted, in SPAU either a green checkmark or a stop sign appears in front of the object. If an adjusted object is reset to original, the active version is replaced by the original version saved in the modification logs. The modifications made using the Modification Assistant are lost when you Reset to original.
You can use Reset to original in the category With Modification Assistant also for objects that are contained in note corrections.
Already adjusted data elements cannot be reset to the original version. Edit the data element in the ABAP Dictionary to restore the desired status. You can make use of the version administration to do this.
Modifications Without Modification Assistant, Translations, Migration Objects
If the object appears in the tree in one of the categories Without Modification Assistant, Translations or Migration Objects, always the active version becomes the original version when you use Reset to original. The modification log is deleted, independent of whether the object has been adjusted or not. The object itself remains unchanged. If the object has been adjusted, the user gets a warning message. Unlike with objects supported by the Modification Assistant, the original version no longer exists. The modified active version is confirmed as original version.
regards
ravish
dont forget to reward points if helpful

Bex Report with and without BIA . . Fails with a dump EXPORT_TOO_MUCH_DATA

Hi Folks,
We have a report thats has been running well in production for more about 18 months. This month it did not complete execution.
We did implement BIA couple of 4 months back and the run times have drastically reduced after the BIA. Now this query execution results in a Dump with and without BIA. FYI the underlying cube has 195,876,020 records only.
Name of Runtime error: EXPORT_TOO_MUCH_DATA
Short text: Too much data for export.
What happened? Runtime error
 The current ABAP program "CL_RSR_CACHE_DO_SPID==========CP" had to be
 terminated because one of the statements could not be executed at runtime.
Error analysis: The dataset stored under an EXPORT/IMPORT ID is restricted
by
1. The maximum possible size of 2 GB
2. The length of a data record and the capacity of the sequence counter. This error occurs only if the capacity of the
sequence counter does not go beyond 255.
Source Code Extract:
 1 METHOD if_rsr_cache_data_object~get_xstring.
 2
 3 FIELD-SYMBOLS:
 4 <l_xstring> TYPE xstring,
 5 <l_sp> TYPE ANY,
 6 <l_spinfo> TYPE ANY.
 7
 8 CREATE DATA r_r_xstring.
 9 ASSIGN r_r_xstring->* TO <l_xstring>.
 10 ASSIGN n_s_spid-r_sp->* TO <l_sp>.
 11 ASSIGN n_s_spid-r_spinfo->* TO <l_spinfo>.
 12
 13 *... Sp has to be the first component
>>>>> EXPORT sp = <l_sp> spinfo = <l_spinfo>
 15 TO DATA BUFFER <l_xstring> COMPRESSION ON.
 16
 17 ENDMETHOD.
Referred to the below note 0001232573
which says to have 'RSRCACHE_ITAB_COMPR' parameter using report SAP_RSADMIN_MAINTAIN
Note say the below (It might be a little tricky, to find an appropriate value for 'RSRCACHE_ITAB_COMPR' as it heavily depends on the query-specific data structures that are stored in the cache. The general recommendation would be to start with a value of about 5000. Test this with a query, that dumped previously. In case the dump persists reoccurs, reduce the value of the parameter significantly. Otherwise, if no dump occurs but you face noticeably longer runtimes, increase the parameter.)
We are trying not able to get to the right parameter value. (changed it from 5000, 4000, 3000, & 1000) without much help. Did any of you had to change this parameter. How low or High can this parameter be changed?
We would like to understand if changing any other parameters would help in RSADMIN table would help?
Any thoughts from the experts would be appreciated
Thanks,
FHF

Hi,
Are you running the report for all the selections(all the data )?
execute the report with data selection and check?
Is the data in the Ic - compressed?
Regards
KP

VA01: Creation of SD order with several material codes,with and without VAT

hi guys,
could someone tell me how to set up the system to not be able to create an SD orders with a mix of VAT condition?
We don't want a sales order with an combination with and without VAT.
Pls advise. Thanks.

could someone tell me how to set up the system to not be able to create an SD orders with a mix of VAT condition?
We don't want a sales order with an combination with and without VAT.
H i
1.The Vat ( Tax ) is applicable on basis of Customer and Mareial Tax classification.
2. So as far as material is concerned , group all VAT applicable material in One Division
Say in FMCG Company
Divisions are Soaps , Skin Care , Shampoo etc
Create Sub Divsions say for Eg Soaps-------Soaps 1( Taxable) & Soaps 2 .( Non Taxable ) and acordingly for other divisions
And then Create Sales Areas accordingly.
All this will need Reorganisation of your Sales Area
Regards
Rohit

Is there an issue going on with the iPhones? And iPads? I cannot send text pics. I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania. This has been going on for a few days!!! It is happening with and without upgrades.

Is there an issue going on with the iPhones? And iPads? I cannot send text pics. I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania. This has been going on for a few days!!! It is happening with and without upgrades.

Contact facebook to address the facebook issues.

Camera wont capture when Tethering Canon T5i in Lightroom 4.4. Tried with and without card.

I just unboxed a Canon T5i (700D). I've been shooting with a T2i for the past three years tethered to LR4 with no problem. Now with the T5i, i connect the camera, set up a new tether session and LR detects the camera in the pop up bar, but the sections for Shutter Speed, Aperture, and ISO are blank. The capture button is able to be clicked, but the camera does not respond. When the shutter on the camera is pressed, also no response. I have tried this with and without the SD card. I have used three usb cable and two different computers. I have checked for updates and my firmware is current. The camera is set to manual mode in the on position NOT the video position and I am tethering to a Windows 7 computer. Please help!

You will need LR5 for that camera to be supported for direct tethered capture. Or you can use the LR "Watched Folder" feature and use the EOS Utility or other tethering software packages. Here is a list of some options - http://www.tethertools.com/plugging-in/software/

T450s screen size? (with and without bezel/border)

Hello, May I ask the exact dimensions of the screen, with and without the bezel (in metric system)?Here is an image of the 4 coords I would need: http://ximg.fr/view-23376686df3969b67183003635c63a4f.htmlThank you very much

the attached image is a t550 indeed but that's because it was the only decent image i could find on google, so I confirm I require these infos for the T450s.
Thanks

TS3406 I have a connection in the top left hand corner and can access the internet with and without internet on my iphone 5c but I can't receive and create texts and calls, someone please help have tried everything!

I have a connection in the top left hand corner and can access the internet with and without internet on my iphone 5c but I can't receive and create texts and calls, someone please help have tried everything!

YOu will need to contact your cell phone provider to resolve those issue, those are carrier features.

Physical inventory with and without handling unit managment

Hello all,
I would like to know what is the difference between physical inventory with and without handling unit management.
Pl. advise.
Thanks,
Maxx

Assuming you are referring to WM inventory, it is very similar. Inventory is conducted at the SU level in WM if you are HU managed. One of the most widely known issues is the lack of ability to post differences of nested HUs at the WM level. If you are not using nested HUs, the process is the same as storage unit management without handling unit management.

STO with and without delivery

Hi All,
sorry for troubling you all again. last question on STO.
1) when STO is required to be with delivery only then only we use IMG > step up stock transport order> Assign Document Type, One-Step Procedure, Underdelivery Tolerance
there is no need to assign document type in the step--> Assign Document Type, One-Step Procedure, Underdelivery Tolerance, if it is without delivery in step -- ? is it like this?
i created a document type zubd by copying the std UB. and did the setting in the STO with the help of SD consultant.
i assigned the new STO document type ZUBD in step
Assign Document Type, One-Step Procedure, Underdelivery Tolerance
now when i am trying to assign document type UB in the step;
Assign Document Type, One-Step Procedure, Underdelivery Tolerance
the system is giving me error message : an entry already exists with the same key
am i right if i make the interpetation for STO with and without delivery like this:
1) for STO without delivery there is no need to do IMG in the step Set up stock transport order. we can use the std doc type UB or the one created by copying UB.
2) for STO with delivery we have to do the settigs in IMG for set uo stcok transport order
thanks and regards
Kavita

Hi Kavita,
You are Right,
Assign Document Type, One-Step Procedure, under delivery Tolerance
In this step, you define which document type is to be used for a certain combination of supplying plant and receiving plant.
There is no need to maintain IMG setting forStock Tranfer Order Without SD delivery. because main moto of assignment of Document type is to specify which delivery type is to be used.
for this we allready maintain IMG setting before this srep >Assign Document Type, One-Step Procedure, Underdelivery Tolerance at
Assign Delivery Type and Checking Rule:
In this step, you specify whether an SD delivery is to be created in the case of a PO with a certain combination of supplying plant and document type. You can also specify which delivery type is to be used.
The delivery determines how a delivery is handled. I.e. stock transfers without a billing document or for stock transfers with a billing document.
Regards
Sanjay l

With and without modification assistant

Similar Messages

Maybe you are looking for