With controler, My_Serial.exe don't work, but with constant, it does.

I am using 6i on a system with windows2000. When I build serial interface application with a controler, it will not open, I receive a windows type error and windows closes my program(See other post). However, if I create it with a constant, it will run. The problem is, I may want a different Com port on different machines. My temp fix is that I have a case structure with com 1, and com 2 with a boolean control. I would rather have it with a controler showing all options available. Anyone have any ideas?
Thanks!!

Attached are copies of what works when built as an app, and what doesn't. Thanks for any help!
Attachments:
dont_work_when_exe.vi ‏67 KB
works_when_exe.vi ‏67 KB

Similar Messages

Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help

Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help. I try to go to settings and the volume won't go up there either I have the home button gesture and still the same. I try resting my iPad and nothing no sound work unless I have my headphones in. Do anybody know how to fix this

Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore

HT201299 Verizon signal is strong but get error message "Ipad is not connected to the Internet"   Wireless works but my Verizon account does not

Verizon signal is strong but get error message "Ipad is not connected to the Internet"   When I try to use Safari.
Wireless works but my Verizon account does not

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

When I go into my music it acts like it's working but then it closes does anyone know why

When I go into my music it acts like it's working but then it closes does anyone know why

try reset
http://support.apple.com/kb/HT1430?viewlocale=en_US&locale=en_US

TS3474 I purchaed the earpods with mic & controls and they don't work with 6th generation nano. Are the features supposed to be compatible with this model of nano?

I purchased the earpods with mic & controls and the features don't work with 6th generation nano--is this normal?

Hi there,
According to the product page:
The remote and mic are supported by all models of iPod, iPhone, and iPad (not all models support volume up/down functions). Audio is supported by all iPod models.
Your iPod Nano may be one of the models that does not support the volume up/down function. Take a look at the page below for more information.
Apple EarPods with Remote and Mic
http://store.apple.com/us/product/MD827LL/A/apple-earpods-with-remote-and-mic
-Griff

Mission control gestures fail/don't work after sleep

Newbie to a 15" Macbook Pro, Lion, with the most recent updates.
I've noticed what I imagine is an operating system error twice now, where after waking the computer from sleep, my Mission Control gestures (I've got 4 finger swiping between desktops, 4 finger up/down for expose or mission control) and the Launchpad/Desktop thumb and 3 finger gestures all simply don't work. All of the same preferences are chosen in System Preferences, but those gestures simply don't work. The trackpad otherwise seems to work with scrolling, 3-finger dragging, tap to click, etc.
The only way I've been able to get the gestures to return is by restarting the computer.
Any ideas on what is going wrong? Is there a command line or other process that would allow me to restart the gestures service without having to completely restart --- that isn't ideal (the ideal is that this wouldn't happen), but a workaround solution is better than nothing?
Thanks

It appears after repairing my permissions with Disk Utlity has fixed this. Open up Disk Utlity (Found under "/Applications/Utilities/Disk Utility.app" - But typing "Disk Utility" in Spot Light should open it).
Select your disk (in my case, Macintosh HD) and click on the button that says "Repair Disk Permissions".
Don't even need to restart!

Fusion Middleware control and targets don't work

Hello,
I got problems with the Fusion Middleware control and targets that don't work after upgrading from AS 10.1.2.3 to 11g.
I have WLS 11g running. The WL Admin consoles are working (http://<hostname>:7001/console and http://<hostname>:7002/console)
1. Fusion Middleware control on Infra (http://<hostname>:7001/em) does not return anything - just show <loading> on the screen.
2. Fusion Middleware control on Mid Tier (http://<hostname>:7002/em) returns a 404 error and I found a solution on this forum to do the Extend Domain and turn on/configure Enterprise Manage. I tried and got error "INST-07303 - Specified Domain cannot be used for Extend Domain configuration".
3. There sre no Targets in both Infra and Mid Tier targets.xml files after ugrading from AS 10.1.2.3 to 11g. How do I transfer all targets from the old AS 10.1.2.3 Infra and Mid Tier targets.xml to Fusion 11g Infra and Mid Tier targets.xml.
OS is Linux SUSE SLES-10 SP3
Any help?.
Thanks,

create the sh file and comping for forms but this file in a where the forms available
export ORACLE_HOME=/home/oracle/Oracle/Middleware/as_1
for i in `ls *.pll`
do
echo Compiling Form $i ....
/home/oracle/Oracle/Middleware/asinst_1/bin/frmcmp.sh userid=aaa/aaa@gggg batch=yes module=$i module_type=LIBRARY compile_all=yes window_state=minimize
done
with regards
Abdulwajid khan
[email protected]

Mic In 2 on front panel don't working (but after many read, he don't working agai

Hi people !
So i've a little problem with my Mic In 2 on my front panel I/O. I'd a soundblaster X-Fi Xtrem music, and recently, i've upgrade her with an optional Front Panel I/O. The front panel work perfectly, and two days ago, after reinstate the PC, the MIC IN 2 don't work suddenly. This back MIC IN work perfectly, but no signal for the MIC IN 2 on front panel. I've reinstate the drivers (the last drivers on the creative official site), i activate the MIC, activate the potentiometer at max on front panel, activate the mic boost in windows xp audio panel, i try another entry (ligne IN, auxilary...) for this MIC 2, i check the AUDIO CONSOLE... but the MIC IN 2 entry is not activate.
I read many post, but waht's the Creative Mixer ? I don't have Creative Mixer but Creative Audio Console. If is the even of windows xp Audio panel, the Line 2 (call "Line IN" normally in my pc : yes i've txo "Line IN", one at left (not activate at the same time of microphone) and one at right (activate in the same time of microphone), she's activate...
The MIC IN 2 work, i'm sure, but i've no signal because this entry appear disable for me ( despite Windows Xp Audio Panel ),
Someone have a solution ?
Thanks in adavance
Message Edited by Claymenia on 04-20-2008 0:55 AM

i made work my MIC IN 2 in front panel, with removing jumper (dynamic mic), but i heard my mic but windows xp software (msn, teamspeak, skype...) do not receive a signal. this very strange, with removing jumper, the MIC IN 2 is activated on front panel hardware but no in software (audio panel windows xp).
If i desacti've the LINE IN 2 in audio panel of windows XP, the mic don't working (no hear) but if i desactivate Microphone, he work normally... (but for the two solution, windows xp don't receive any signal)
No idea ?
Message Edited by Claymenia on 04-20-2008 02:28 AM

Qosmio X870 - Internal speaker don't work but headphones do.

I'm a little annoyed as this problem has seemed to have randomly occurred.
Making it difficult to pinpoint what caused this/finding a solution... :(
So after opening my laptop from sleep or hibernate, I can't remember which specifically and want to listen to some music, I notice there is none.
I plug in my earphones, and there is sound. Both times the sound mixer is indicating sound.
The speakers are the default device, green tick, and sound levels are picked up. "This device is working properly.".
I actually let windows automatically find a newer driver version, which it surprisingly did, downloaded and installed - restart laptop. Still no sound.
I read somewhere that it appears for some that the hibernation and or sleep mode on Toshiba laptops cause the audio drivers to behave strangely. But I don't now what kind of troubleshooting to do, to fix this.
Or it could be hardware related, regarding the port/jack. I don't know. I pray its software.
Please could someone help me and make me happy again
Nigel

Hi
>Or it could be hardware related, regarding the port/jack. I don't know. I pray its software.
I dont think its hardware related issue.
As I understood the issue: the speakers work properly if the notebook runs in normal mode.
The speakers dont work if the unit wake up from hibernation or sleep mode.
I meet such issue on my 2nd notebook. The speakers did not work but sound appeared using connected headphones. I could solve this by sound driver update.
But I think this isnt a universal solution.
From my point of few you should try different workarounds.
First of the notebook should be tested and checked using the Toshiba preinstalled system.
The image has been configured and tested by Toshiba and usually everything should work properly. Therefore i would recommend you to use the Recovery disk (or HDD recovery procedure) in order to set the notebook back to the factory settings.
The other workaround would be the uninstallation of the sound driver as well as other sound driver related parts.
In device manager go to the sound, video and game controller
Here uninstall/delete the
- Realtek sound driver
- nVidia High Definition Audio (if available)
- Intel high definition audio controller (if available)
After this short procedure reboot the notebook.
Now you will need to wait until the deleted devices were recognized and installed again.
After this process has been finished, check the sound availability.

Earpods don't work, but iphone still as warrenty.

I still have about 5 months of warrenty left on my iphone 5 and the earpods that came with my phone have stopped working. i can't still to my music unless if i move the cord before the jack around. I was wondering if i could get them replaced? I heard you can get them replaced if you have warrenty on your phone. By the way I'm from Canada.

If they don't work then they will be replaced under your warranty unless you have caused damage to them.
Being in Canada your earphones will only speak Canadian English, eh.

IPhone 4S speakers don't work but headphones do

I just purchased Bose headphones that work great with iPhone. Now after several times of using them the speaker on the phone does not work. The icon ringer does not say headphone mode but the phone seems stuck in headphone mode. When I put the phone on a docking station the external speakers on the docking station work fine. Any ideas how to get the speaker on the phone to work again? I have tried sucking air on the jack hole, blowing air in the jack hole, unplugging the jack several times but no resolve. any ideas?

it's a hardware issue read more here
https://discussions.apple.com/thread/1343532?start=315&tstart=0
and here
https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=UTF-8&oe=UTF-8

TS2551 My computer keeps telling me that "ApplePhotoSream.exe has stopped working".... Does anyone know what may be causing this, or how to fix it????

When I click on the iCloud icon on my computer systems tray, it brings up my active selections, but then shows the following message: "ApplePhotoStream.exe has stopped working"..... Then, it shuts down the program and says I will be notified of possible solutions to the problem. It has done this for several weeks, and I have not received notification as to what's going on.
Is anyone else having/had this problem, and what is the solution to fix it????
This is keeping my photos from being streamed to my other iOS devices, that I have synced.

What OS are you using?
https://discussions.apple.com/community/icloud
is the iCloud forum
Regards
TD

Google sudoku don't work but does with IE

I can't use Google Sudoku with Firefox 3.6.13. When I enter a number in the grid, the cursor jumps off the grid, or to wherever else that number appears on the grid.
It works fime with IE.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

How can I uninstall Firefox 8 if Remove Programs and the uninstall helper.exe don't work?

I need to uninstall Firefox, but when I click "Remove" in Add/Remove Programs, nothing happens. I tried it several times. Add/Remove Programs shows Mozilla Firefox 3.0.6, which is strange since I have 8. I also tried running the helper.exe file in the uninstall folder, and nothing happened. I tried doing all of this after a few reboots as well as in Safe Mode, and had the same result. I searched the online forums, but I did not find anyone with exactly this same problem. I made sure Firefox was not running when I tried to uninstall it (double-checking the processes in Task Manager). I just ran Windows Update and everything else is working fine. I have no Antivirus software running. I closed all programs (down to essential Windows processes) before attempting the steps above. This is the first time I have ever attempted to uninstall Firefox.
Thanks!

You may only see leftover entries in Add and Remove programs, but the listed programs may have been replaced by the updated version. This can happen if the updater didn't remove those old entries.
See http://kb.mozillazine.org/Uninstalling_Firefox

Parental controls in iTunes don't work for TV Shows?

Using parental controls - i can hide/block Movies & explict music content - but doesn't appear to work for TV Shows marked "Caution" - any ideas?
Help would be appreciated.
thanks

I raised this in another thread ages ago - indeed it seems you can only include TV Shows marked caution, rather than exclude them.
Not much you can do other than raise feedback
http://www.apple.com/feedback/iphone.html
http://www.apple.com/feedback/ipodtouch.html

With controler, My_Serial.exe don't work, but with constant, it does.

Similar Messages

Maybe you are looking for