With Firefox Browser can't load flashplayer

Recently, I changed from Internet Explorer to Mozilla Firefox.  Now I am unable to download adobe flashplayer.  Why, it worked fine with Internet Explorer.

Thomas,
I think you don't have the ActiveX control on your remote computer.
You might copy the hypertrend.dll from your DSC computer to the remote computer and run regsvr32 "c:\winnt\system32\hypertrend.dll" to register the activeX control.
With this you might see the ActiveX control in the Remote Front Panel.
However, I don't know exactly if you would see traces and if you could browse back to the remote database. For sure you would need as well Logos/Citadel services running on the remote computer to do that.
A good point about limitation of ActiveX controls in Remote Front Panel is menioned in : Why Doesn't My ActiveX Object Update In A Remote Panel?<
/a> and the link at the bottom of this one.
H...

Similar Messages

  • Airport says connected, but browser can't load any page

    Hi all mac geniuses, I just got a wireless modem/router from my DSL provider, and after I selected it and entered the password on the Airport menu, Airport says I am connected. However, the web browser can't load a page like it doesn't have internet connection. Is there something I missed during the setup?

    No, Three feet away from the wireless. When i connect to the cat6 cable, I have no problem with the high-speed of the router.
    It's only trying to disconnect and go wireless that I have a "fake connection" if you will
    The 404.2 is the number I got from system profiler
    the whole firmware info is: 404.2 (3.90.34.0.p16)
    as they say in Shakespeare: "For my part, it was Greek to me"
    Remember this is an internal card on my laptop, so the numbers might be different...
    I truly appreciate any help/wisdom anyone might have on this matter.
    I'm probably going to call Netgear who make this new smokin router and see what's up

  • I have a htc wildfire, and if i try to install firefox from android market place it says that my device is not compatible with firefox. how can i install it ?

    i have a htc wildfire, and if i try to install firefox from android market place it says that my device is not compatible with firefox. how can i install it ?

    According to a random website... the HTC Wildfire S uses a Qualcomm MSM7225 processor. This processor unfortunately does not support the full ARM version 7 instruction set, so Firefox cannot run on it.

  • HP 8500 printer will not print fast on firefox, but does on Safari. HP support says it is a problem with firefox. Can you help me out?

    Question
    HP 8500 printer will not print fast on firefox, but does on Safari. HP support says it is a problem with firefox. Can you help me out? edit

    Thank you for posting your list of installed Extensions. One of them might be intercepting the menu command. Since you have the Add-on Compatibility Reporter, it's possible that an older add-on that doesn't actually work well with Firefox 5 could be to blame. Could you try disabling the "HP Smart Web Printing" extension and see whether that makes any difference?
    Also, you can simulate a print button on a web site by pasting this to the location bar and pressing Enter. You also can save it as a bookmark for easier access (when scripts are saved as bookmarks, we call them bookmarklets). Hopefully you won't need it for long.
    <br>javascript:void(window.print());

  • Can not load yahoo mail with Firefox but can with internet explorer

    I have been getting: connection refused when trying to load yahoo mail from my firefox browser, but when I use internet explorer I can open my yahoo mail.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"

  • How to custom select minimum amount of addons and plugins to load with Firefox browser?

    Hello, I am using latest Firefox 24.0 along with Window xp service pack 3, with approx 1 1/2 Gb memory along with Firemin Plugin to keep Firefox Memory up. I will hopefully be upgrading my PC by early next year.
    However even when using Firemin along with Firefox, many times regular Firefox is bloated, and still uses too much memory, so, many times I have to open Firefox in Safe Mode, just to be lighter.
    Is there any way to open Full Version of Firefox, in a Custom select mode, where I can have set just the minimum Addons and plugins actually needed at the time, without having to go thru and disable the ones do not need? I wish I could use Firefox in safe mode all the time, because is so much lighter, but sometimes I just need the full feature version. Please advise, and thanks for your help!

    You can use multiple profiles and the -no-remote command line instance
    to load different (clean vs addon bloated) profiles.
    SEE
    * http://kb.mozillazine.org/Command_line_arguments
    AND
    * [[Use the Profile Manager to create and remove Firefox profiles]]

  • My Firefox browser will not load up. When I click on the icon, a small Windows Vista message appears "Couldn't load XPCOM.". How can I correct this problem?

    Many thank!

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from [https://www.mozilla.org mozilla.org] (or choose the download for your operating system and language from [https://www.mozilla.org/firefox/all/ this page]) and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
    <b>WARNING:</b> Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. <!-- Starting in Firefox 31, the Firefox uninstaller no longer lets you remove user profile data.Ref: Bug 432017 and https://support.mozilla.org/kb/uninstall-firefox-from-your-computer/discuss/5279 [Fx31] Windows uninstaller will no longer offer the option to remove personal data -->
    Please report back to say if this helped you!
    Thank you.

  • My firefox browser closes when loading any page without a crash report

    My broswer keeps closing when loading. No crash report pops up, it just takes me to the "well this is embarrassing..." page that asks if I want to restore, to which no matter which option I pick it keeps closing on me.

    clearing cache, and cookies only removes the cookies and clears the
    cache/ Not passwords or anything else. Closing in safe mode? That tells
    us something. Now do this,<BR><BR>
    1) '''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''<BR><BR>
    2) '''''Firefox > Add-ons > Plugins'''''. Disable '''EVERYTHING''' ! !
    If Firefox closes on you, start it again and keep going. After everything is
    disabled, restart in safe mode again. And let it sit for a while.<BR><BR>
    3) Look at the list of programs below and run at least 3 of them. Each
    program works differently so what one may miss another could pick up.
    ======================================================
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Why internet download manager is not compatible with firefox 5. can i found another download manager for firefox 5 like IDM???????

    looking for download manager like IDM to firefox 5

    There are parts of the CMS that don't work with Firefox 6. They do in IE and Chrome but I much prefer Firefox. Until they get their CMS updated to work with version 6, I need to go back to 5. And I can't undo the upgrade because I have a new laptop and the only options to load were Firefox 6 or Firefox 3.6

  • Browser can't load sites using 1.4 plugin when service is running

    Hi,
    I am having some strange problems and am hoping someone here might be able to offer some insight to help me solve it.
    Some customers have reported a problem with our software that runs as a service on Windows machines. When the service is started, they cannot use IE or Netscape to view sites that require the Java 1.4 plugin [They have 1.4.2 installed].
    We tried to reproduce the problem here and were unable to. We tried a different machine and now can reproduce it all the time. All of our test machines and the customer's test machines have the same software installed - except for hardware drivers.
    Here is what happens:
    If the browser is open already, and our software service is started, then the browser has no problem connecting and viewing applets that use the 1.4 plugin.
    If the browser is not open when the service is started, then when the browser is opened one cannot view applets that require the 1.4 plugin.
    So, it seems as though everything works fine as long as the browser is open before running our service. If the browser is closed when the service is started, then there seems to be some conflict with the 1.4 plugin and the browser will not load sites that require it.
    Any ideas what may be happening here?
    Thanks!

    Hi all,
    I have the same problem. If I start Tomcat 5.0.24 as a service on my Win2k and
    open a page containing an applet (using 1.4.2_02 plugin) the IE hangs.
    If the IE started before the Tomcat service then it works fine.
    Any comments would be appreciated.
    Regards,
    Peter Bartha

  • Browser can't load HyperTrend in a Remote Panel Applicatio​n

    I use the Remote Panel Function (LabVIEW6.1 + DSC6.1)to publish a Front Panel.
    When I load the Front Panel with a Browser (IE6 or NS7) i can see all elements on the Front Panel except the HyperTrend.
    I get an empty space where is written "Element could not be loaded".
    This appears only on machines, where no LabVIEW is installed. (But of course the Run Time Engine 6.1)
    What could be the reason?
    Thanks for all help
    Thomas

    Thomas,
    I think you don't have the ActiveX control on your remote computer.
    You might copy the hypertrend.dll from your DSC computer to the remote computer and run regsvr32 "c:\winnt\system32\hypertrend.dll" to register the activeX control.
    With this you might see the ActiveX control in the Remote Front Panel.
    However, I don't know exactly if you would see traces and if you could browse back to the remote database. For sure you would need as well Logos/Citadel services running on the remote computer to do that.
    A good point about limitation of ActiveX controls in Remote Front Panel is menioned in : Why Doesn't My ActiveX Object Update In A Remote Panel?<
    /a> and the link at the bottom of this one.
    H...

  • Dalinton Karma: 0 Registered member my firefox browser will not load html images when i'm using notepad? It load the html files but not image says cannot find

    I'm creating a webpage with Notepad and wanting to see illustrations using my browser, i have loaded the text html files and that works fine however when i try to load images using this command...<img src="life.jpg" width="403" height="403"> it fails to load...error says cannot find file however the file it says it cannot find is the correct name and the image is located in the same folder save as html...is this a pc security problem? Tried different images...saving as jpg, html...thanks

    Any errors in the Web Developer > Error Console (Ctrl+Shift+J) or Web Console (Web Developer > Web Console;Ctrl+Shift+K)?
    See also:
    *https://developer.mozilla.org/en/Tools/Web_Console
    Are you using relative links to the image files?<br />
    Can you post (part of) the code?
    Make sure that you are using forward slashes in the file paths and not backslashes.
    Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).<br />
    *http://kb.mozillazine.org/Images_or_animations_do_not_load

  • Cant print coupons with firefox browser

    trying to print coupons from coupons.com
    will not let me unless i close firefox browser
    then i see it in the download window but when i go to open it says i need to close firefox browser and then i am no longer connected

    Sorry brian5, I wasn't wasn't answering you 6 month ago, was I?
    Why not ask for support from the coupon website or the developer of those plugins? <br />
    Add-on developers are responsible for supporting what they create, not Mozilla. "We" try to help users with anything related to Firefox and add-ons when we can, but without signing up for the coupon service I can't even get as far as a download page for those coupon plugins and see what instructions they provide for their users, if any. There is no way for non-users of that service to get the plugins.
    You might want to consider trying what ellenw1952 posted about 3 months ago, using IE Tab 2 - https://addons.mozilla.org/en-US/firefox/addon/ie-tab-2-ff-36/ - and opening the coupon pages in an IE tab within Firefox.

  • Flash video has not worked with Firefox browser for years. When will you fix this?

    Anyone who uses Firefox browser (for Windows or for Mac) knows that flash video playback ceased working sometime around Firefox ver 13 and has not worked since.
    The Mozilla people say it is Adobe's fault - instead of fixing Firefox.
    They say roll back to Adobe Flash version 10.
    This solves the video problem, but then, any other services that depend on the latest Flash build, quit working properly.
    This situation leaves millions of Firefox users in perpetual frustration. We can't use our browser of choice to view any web video built with Flash.
    This is so unacceptable. I am unable to understand why Adobe and Firefox don't get together and iron out whatever code incompatibility is causing this.
    I would really like to hear Adobe's explanation for this.

    proteus-editorial wrote:
    Anyone who uses Firefox browser (for Windows or for Mac) knows that flash video playback ceased working sometime around Firefox ver 13 and has not worked since.
    The Mozilla people say it is Adobe's fault - instead of fixing Firefox.
    They say roll back to Adobe Flash version 10.
    This solves the video problem, but then, any other services that depend on the latest Flash build, quit working properly.
    This situation leaves millions of Firefox users in perpetual frustration. We can't use our browser of choice to view any web video built with Flash.
    This is so unacceptable. I am unable to understand why Adobe and Firefox don't get together and iron out whatever code incompatibility is causing this.
    I would really like to hear Adobe's explanation for this.
    Uh... I don't know what planet you posted this from, but Flash video has worked flawlessly with Firefox for hundreds of millions of users here on earth, without any gaps since Firefox was still called Mozilla.
    For the record, I have Firefox 28 with Flash Player 13 installed on:
    WIndows XP (SP3-64bit)
    Windows Vista Ultimate (SP2-64bit)
    Windows 7 Ultimate (SP1-64bit)
    Windows 8 Enterprise (64bit-2 machines) 
    Windows 8.1 Enterprise (64 bit)
    OS 0.6.8 Server
    OS10.7.5
    OS10.8.5 
    OS10.9.2
    And I've had Firefox with Flash Player since 2003 on both OS formats. I've never had a compatibility problem.
    I also use Chrome, IE, Opera, Safari and a few other browsers you probably never heard of (like SeaMonkey, Maxthon, Waterfox, iCab, OmniWeb)... Flash works in all of them.
    I'd have to say the problem is with your system specifically, because if it was a Firefox/Flash compatibility problem, there would have been hundreds of millions of complaints about it, for over a decade. That... just isn't the case.

  • Forum 'Sign In' with Firefox browser not working

    Anyone else having this issue with Firefox 23 or 24? IE9 works fine.

    Notice there is no mention of the Adobe Forums or Adobe Labs 'Sign In' accounts. My 'Adobe ID' is my email address and my Adobe Forums and Labs 'Sign in' is trshaner, both with different passwords and email addresses.
    I had an online Chat at the link you provided with Adobe Tech Support. I was sent a password reset email for the Adobe forums account using the other email address [email protected]. I was able to successfully change the password, but the old password persists for the Adobe Forums 'Sign In.'
    Here's the chat-See bolded responses.
    Khader: I will send a password reset link to your both email address. You can reset the password and can login.
    Khader: I would like to inform you that same email address can be used for both Adobe Forums and Labs 'Sign in'.
    Todd Shaner: OK, thank you. This is just for the trshaner@ that I need to reset. Will I lose my history for the trshaner Adobe Forums account?
    Khader: You will not loose any history for your trshaner@optonline.
    Todd Shaner: When I Sign In to Adobe forums with toddshaner@ it does not show my previous history. Can I still use trshaner Sign In and just change the email address in my profile?
    Khader: I have sent you the password reset link to your both emails. Please reset the password and login.
    Khader: I'm sorry the email address is already register with us and you will not be able to change the email address.
    Khader: Please reset the password for your trshaner@ and check the history.
    Todd Shaner: OK, I'll try the password reset for trshaner.
    Khader: Sure, I will stanby.
    Todd Shaner: OK everything is there but still getting this error when logging in or logging out: Jive SBS Jive SBS Oops, the page can't be found Sorry, the page you requested can't be found. You can go back and try again, or start again at home. Page can't be found Error 404
    Khader: In this case I would recommend you to delete your cookies or try login using different browser.
    Todd Shaner: Delete cookies or use different browser works for one-time. When shutting down or after a few hours the message comes back
    Todd Shaner: See discussion here: http://forums.adobe.com/message/5744080#5744080
    Khader: Please raise your request in Adobe forums.
    Todd Shaner: I have! Please see post here: http://forums.adobe.com/message/5739578#5739578
    Khader: You will get a reply for it.
    Todd Shaner: Ok, thanks for your help. I can still get into the forum. So just an annoyance for now. Have a good day. Bye

Maybe you are looking for

  • Initial stock load of batch managed materials

    Hi, We are using batch management for FERT materials. The class type 022 is being used for creating batch class. The class has been assigned to six characteristics. We need to load the initial stock of all these FERT items with batches with correspon

  • How to find which script assinged to which program?

    hi SDNs, how to know configuration of NACE for particular program? i don't know application type.. i have checked TNAPR. no use. tell me is there any other tables ? i think one more table also there? thanking you

  • Says it cannot find a page...but internet explorer can!!!

    when I try to login to a website it get the message: We're sorry, we can't find the _________.com page that matches your request. You might have typed in the address incorrectly, or the page may no longer exist. Please make sure that the address and

  • Output 1080psf 23.98 to DigiBeta 29.97

    I encountered a lot of problems trying to output my 1h30 project to DigiBeta. The project is 1080psf 23.98, using the ProRes422 (HQ) codec, and the source format is HDCAM. For the sound editing, they need a DigiBeta. So I have to output from my 23.98

  • Authorizing / de-authorizing

    I took the iMac down to the Apple Store for some repair work. It been in the shop before for various issues, but this time around, the had to replace the logic board and power source (thank you Apple Care). So, every time I get it back and plug in my