With the update of ios 7.1 is there a way to get the picture when someone calls you to show bigger?
I updated my phone yesterday to the new ios 7.1 and now when ppl call the picture is smaller. Is there a way to make it bigger where it takes up the whole screen again?
If your iPod Touch is a first generation, then yes, iOS 3.1.3 is the highest you can go with it. Use this article to help you determine what generation iPod Touch you have.
http://support.apple.com/kb/ht1353
Otherwise, you may need to update your iTunes to a later version. However, in order to update, your computer must meet the minimum requirements to upgrade to the newer version.
B-rock
Similar Messages
-
My company will not allow us to download iOS 7 due to software / security issues on our end. The problem is I need to download numbers but it says I need iOS 7. Is there any way to get an earlier update of numbers that's doesn't require ios7?
Thank you so much! It's updating now. I'm hoping that once the update is finished that it will sync like normal as well. Of course I'm still a bit confused/concerned about how it refused to update on it's own, but for now that's not a problem. Hopefully from now on there won't be any more problems.
-
Is there any way to get your pictures back after updating to maverick?
is there any way to get your pictures back after updating to maverick?
Is Aperture not launching at all? Then update Aperture like Ernie recommended. You'll need version 3.5.1, or 3.4.5 with Mavericks. If you have any Aperture 3 version, you should be able to update for free.
After updating Aperture, make sure you have a backup copy of your Aperture library, before opening it in the new version. Click the Aperture library, to open Aperture on your library.
Or, is the problem, that Aperture opened on an empty library? Then check the file system on the drive with your Aperture library. It may have the wrong formatting. Then move your Aperture library to a drive formatted MacOS Extended (Journaled). Click the -
Following upgrading to iOS7 I lost all sound for my 4s except for the ring when someone calls. I can't listen to music, I don't get text or email notifications. I have tried a wipe and reinstall, I've tried hard rebooting, I tried erasing all of my music and reinstalling it, I checked my Do Not Disturb, and I tried the AssistiveTouch mute button. Nothing. I can't even play music through bluetooth or headphones. Can anyone help please as its driving me mad!
I experience this problem too. I am using iPhone4 and just upgrade it to iOS7. And now I can not make outgoing call. I checked all the setting, and nothing wrong. I even replaced my sim card with the new one, still can not help.
I read this link
https://discussions.apple.com/thread/5322252
and I try dial *#31#, it help, but not permanent solution. -
Is there any way to get your pictures back after updating your phone
s there any way to get your pictures back after updating your phone
Did you fail to import them to your comuter before updating?
If for some reason you did fail to do this, then they are very liekly gone.
You can try restoring from backup. -
New to grading, but figured there had to be a way to get zebras to see what's overexposed/underexposed quickly like on a monitor when filming? Or is there a tutorial for this somewhere on how to achieve this effect within SpeedGrade? I also have to match clips that were shot at slightly different lighting setups, but still blow out the background on all of them. Thanks!
This is what the scopes are for ... which Speedgrade "hides" off the left edge of the screen.Here's where they're hid:
And here's what it looks like with the Vectorscope YUV (really useful!), Histogram (occasionally useful, often replace it with "Wave"), and Parade which is especially useful in exposure/gain, contrast, and white-balancing. Note where it says " 3 Scopes Layout " ... click in that area to choose how many scopes, and right click on each resultant pane to choose which scope to show there.
Neil -
How do u get the company name to come up when someone calls you?
I've recently got the iPhone and have many of my work contacts in with first name only and then company name. All that displays when a call comes in is their first name and not the company name which is really frustrating... Does anyone know an app or setting to display company name when a call comes in? Cheers
Third-party apps can't affect things like that, so you'd need to send a feature request to Apple:
http://apple.com/feedback
on the Mac, in Address Book, there is a "Company" box I can check, and so I do have some company names showing up as the key info in contacts and on the call screen. But mostly I don't also have personal names for those numbers, so I don't know if even that works as you want--I suspect it would not show the personal name in such a case. And I can't find any equivalent of that box in the iPhone Contacts. -
This is a new phone we just got from insurance replacement. It did work but now only works on speaker phone.
Hi LuckyPhillips,
That's not good! We want all parts of your device to work properly. Has there been any liquid or physical damage to the new phone? Have you tried powering the device off/on? Are you using a headset with the device?
Thanks,
PamelaF_VZW
Tweet us @vzwsupport -
Why turns off the phone when someone calls me ?
Hello ..
So . My phone is ok , but only the someone call me the phone it turns off and i can't to answer .
I don't know it have .
Please help me !
Thanks a lotStandard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove all apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red (-) to delete all apps from this list.
- Press the home button twice when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue. -
When I connected to itunes and updated my iphone, a lot of my contacts were removed. Why and can I get them back without having to do this by hand again?
Download the free app My Contacts Backup and use it to back up the contacts on your device now (it will back them up as an attachment to an email that you send to yourself). Then restore your device to your most recent backup to see if it will recover your contacts. If not, if necessary you can open the email and tap the attachment to re-import the contacts you have now back to your device.
If you need to restore to an iCloud backup this has to be done in the initial setup process, which requires you to first erase your device. If you have any more recent data on your device now that is not in the backup that you want to save you'll need to do that first. Then go to Settings>General>Reset and tap Erase All Content and Settings. You will then go through the setup screens on your device, and when given the option, choose Restore from iCloud Backup (see image below). Be sure you are connected to wifi and your charger as this will take some time to finish. -
When someone messages you from their iPhone or iPad you receive the message to your iPhone or iPad but you don't know whether it is from their iPhone or their iPad. That needs to be updated.
Why does it matter?
It's the person who sent the message that is important, not which particular device they used to send it, surely?
When someone calls you from their home landland, is it necessary to know whether they're calling you from the phone in the kitchen, or the one in the bedroom? -
In the commercials for the iphone, when someone calls, the phone defaults to the wallpaper (in the commercials its most often the photo of earth) and the photo of the person is a small square in the upper right corner. When people call me, the photo I've chosen for them takes up the whole screen.
How do I make my phone look like the phone in the commercial?!
PS, I understand this question is pretty hilarious and non at all an important one.
Message was edited by: Host
To make Subject more descriptiveNot silly at all, many have asked.
In general, the answer is....
When you sync contacts from your comptuter, if you are using a Mac or Outlook 2003 (I think) or higher, then in your computer's address book, you can assign an image. Your computer makes (saves) a thumbnail of that contact with your contact data. When you sync, that thumbnail comes over to the phone.
When you assign a picture via the iPhone to a contact, it stores a full screen version of it instead of a thumbnail.
So when a person calls, if the image was from a sync with a picture that was assigned from the computer you will see what you saw in commercials. If the image was assigned from the iPhone directly, then you get the full screen view when they call. -
lost all my notes in my iphone 5s and so i went to my ipad and pulled the notes up and seen them for a Sec then they were gone. Please is there any way to get my notes back?
Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store -
Cant tell the time when reciving calls and iPhone is locked
here is the setuation .. it was middle of the night .. my iPhone is next to me .. i am in bed .. iPhone locks it self and goes to black screen .. i go to sleep .. some times later in the night, i get a phone call .. iPhone rings .. i pick it up .. its one of my co workers .. i can read his name .. BUT, i could not tell what time it wan when i picked my iPhone ... the clock up on the top is not visibale .. because the iPhone is locked .. so for a few seconds there, i did not know the time .. till i had to answer .. and belive me .. you need to know what time it is when someone calls you while sleeping .. as i am sure you all know, there is a sence of eargency to any call you recieve during your sleep ..!!
these little things should not be missed by Apple "Guines" enginers .. this bug needs to be fixed asap ..
However, if the iPhone is not locked .. and you do get a phone .. the clock will still be up there for you to see what time it is ... this bug only happens if your iPhone is locked .. then the clock will be replaced by the lock symbole .. iPhone not cool !!I believe this is normal. When you hit the top button you are putting the phone into sleep mode. When you recieve and miss a call it will show up on your phone. If it is left untouched it will go back to sleep after awhile (depending on what your sleep settings are) However when you go back to your phone after being away from it, if you press either the top button (sleep/wake) or the bottom button (home) it should still show whether or not you recieved a missed call or text message.
Chris P. -
I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows the device but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI and i tried all the stuffs that has been written in the manual. Plese give me the Proper suggetion about this issue..!!
If your router is not identified in a national database (don't recall who maintains it or where it is) then there is no location associated with it. Hence your device cannot be located. I suggest you try your test at some public wifi spot, like a bookstore or coffee shop. These places usually have a location associated with their wifi router.
Maybe you are looking for
-
How do I find out what HD upgrade options are compatible with my MBP?
I'd like to upgrade the 250GB hard drive in my Macbook Pro to a 500GB or larger size. A copy of the Hardware Overview is pasted below to illustrate the specifications of what I have right now. How do I find out what drives are compatible with my mach
-
Ok I read this article and the selection is working. Is it possible to dynamically "Rename Hierarchy After Loading"? http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a03c23b1-1cb4-2d10-f1ae-9f5ed92be246?QuickLink=index&overridelayou
-
EJB3.0 App Deplyed wid warnings : Object not found in lookup of JPA-DEFAULT
Hello Friends I am getting this warning while deploying this EJB 3.0 Application here I have 1) 4 DCs with session beans 2) One Entity DC I have checked my jta-data-source its added properly here is the deployment stack trace Description:
-
Hi All Wondered if someone could help as Im struggling to get my head around moving form as2 to as3. At the moment im struggling wiht how movieclips are handled. All i want to do currently is dynamcially create movieclips to house images, thse then n
-
URGENT: Need to change my access number (moved to ...
I had a US access number. I now live in France and need a French access number. How can I do that? I need to make this change very quickly (within next 45 min, if at all possible). Thanks. Sophie