Withholding Tax Error during Vendor Down Payment

Hi,
We have created some new Withholding Tax Types and codes and have assigned them to a Vendor. Now when we try to make a down payment on this Vendor, at the time of posting the system gives the error:
"WCT Code not allowed in Down Payment. Remove the WCT Code."
We are using the newly created Withholding Tax code, so how and why is the system taking it as WCT?
Please help.
Thanks!
Regards,
Angad Nagpal

Hi
First create withholding tax types for Payment Posting and withholding tax codes and while assigning withholding tax types and codes in Vendor Master Data , only assign withholding tax types and select Liable checkbox and do not assign withholding tax codes.
while doing Down payments or Invoices system will prompt a pop-up box and you can select the relevant tax codes.
Then you can check whether it is calculating the taxes or not.
Regards
Venkat

Similar Messages

  • Error during Vendor down payment f-48

    hi
    When i doing vendor down payment by F-48 and i enter bank services charges than this msg display.Can anybody telll me what the solution for it?
    Acct determination not defined for trans. BSP   in chart of accts CHPL
    Thanks
    Rekha

    Hi Rekha,
    Please check the following customizing
    1. Go to FBKP
    2. Click on Automatic Posting
    3. Now click on Bank transaction
    4. Double click on BSP and assign the GL Account for Bank Charges
    Hope above should work
    Regards,
    Jigar

  • Error in Vendor Down payment F-48

    Hello,
    I got an error message during posting Vendor down payment in F-48:
    " Balancing field "Profit Center" in line item 003 not filled. The field Profit Center marked as balancing is not filled with any value in line item 003, even after document splitting. "
    I'm using vendor down payment using VAT code.
    I think it's related to document splitting customizing.
    Can someone help me on this ?
    Thanks in advance
    Tarek

    Hi
    The Concept of Document Splitting is that you must use same Profit Center in all the line items of an Document.
    Not only in Down Payments , in Invoices also or in any document entry.
    i will give you 1 example, suppose an Invoice is there,
    31 Vendor 10000
    40 expense g/l a/c 5000 x1(x1 iscost center , profit center in x1 is x)
    40 expense g/l a/c 2000 x2(x2 is cost center , profit center in x2 is x)
    40 expense g/l a/c 3000 x3(x3 is cost center , profit center in x3 is x)
    If you give different cost centers , but they are also having different profit centers , then the total amount should be written on which profit center? this is logic , which profit center it will pick?
    Regards
    venkat

  • Withholding Tax Calculation Error for Vendor Down Payment Clearing:Oct '09

    Hi,
    We are trying to incorporate the new Withholding Tax Structure w.e.f. 01-Oct-09.
    There were 3 scenarios possible:
    a. Invoice = Down Payment
    b. Invoice < Down Payment
    c. Invoice > Down Payment
    While 1 & 2 were taken care of effectively, the third scenario did not work as expected. The scenario is as follows:
    1. Down Payment (Date : 30/09/09)
    Amt : Rs. 40000/-;
    Withholding Tax @ 15% : Rs. 6000/- (40000 * 15%)
    Surcharge @ 10% : Rs. 600/- (6000 * 10%)
    Edu Cess @ 2% : Rs. 132 (Rs. 6600*2%)
    Higher Edu Cess @ 1% : Rs. 66 (Rs. 6600*2%)
    2. Invoice (Date : 02/09/09) - As per new TDS Rates
    Amt : Rs. 50000/-
    Withholding Tax @ 10% : Rs. 5000/- (50000 * 10%)
    Surcharge : NIL
    Edu Cess : NIL
    Higher Edu Cess : NIL
    3. DPC (Date : 02/09/09) - Reversal of TDS calculated in Down Payment (Step 1) above.
    Issue:
    While making J1INCHLN, amount is adjusted as Rs. -1000/- (hence zero) not payable.
    Also, the Surcharge, Edu Cess & Higher Edu Cess are also getting reversed in DPC.
    As suggested by SAP Note No. 1372734 - Handling of downpayment clearing scenarios after budget '09, the scenario does not seem to work.
    Actual payable should be worked out as under:
    Invoice : Rs. 50,000/-
    DP : Rs. 40,000/-
    Bal : Rs. 10,000/-
    TDS @ 10% : Rs. 1,000/-
    All TDS Challans, Certificates & Returns must reflect Rs. 1000/- in the Challan.
    Require assistance.
    Regards,
    Kapil Tilwani

    Hi Kapil,
    The following needs to be taken care of  -
    The message controls settings as the note suggests must be set as W.
    When entering the details the logic is Vendor Debit amount is Tax amount + 1
    The Vendor credit line, the tax code has to be assigned with the advance amount (amount for which the challan has been created) as the tax base amount and the tax amount will be the extra liability that needs to be created.
    In your example -
    The tax amount will be - 2000 ( the debit at the time of downpayment clearing should have been 4000 instead of 6000)
    Tax base amount -  40000 (Challan for this amount has already been made at the time of downpayment made)
    The vendor Debit - 2001 (2000 + 1)
    The vendor credit - 1
    Note - Tax amount and base amount has to be made manually in the withholding Tax tab for the credit entry.
    Please revert for any clarification.
    Thanks and Regards,
    Anit

  • Withholding tax issue while doing Down payment Clearing - Help needed

    Hi,
    1. I have posted vendor downpayment  for 5000--> TDS was deducted here
    Bank Credit = 4500
    Vendor Debit =5000
    TDS Credit =500
    2. I have posted vendor invoice for 5000 --> TDS was calculated
    Material Debit = 5000
    Vendor Credit =4500
    TDS Credit =500
    3. Now i have transfer the down payment amount in F-54 (As per the above entry how much do i need to trasfer in this F-54 transaction???)
    Note: How much amount do i need to transfer as per the above scenario in F-54? Kindly advise me
    4. For testing i have transferred 5000 down payment for the invoice 5000. But while doing F-44,system is not allowing me with differance amount. In F-44,system is not showing any withholding tax details. Kindly help me on this..
    Thanks
    KB

    Dear
    TDS should have been deducted either at the time of Invoice posting (MIRO) or at the time of Advance Payment (F-48).  So you need to remove TDS code while doing  invoice or at the time of making advance payment in F-48.  If this is ensured there will not be any problem in clearing.
    When inovoice is posted debit will be to GR/IR Account and not to Material Account. 
    Regards

  • Withholding tax on vendor down payments

    The System is not calculating withholding Tax when I make down payments to to vendors. How may i correct this please

    Hi MAURIZIO,
    Thanks for refering the SAP note, but this note speaks of inconsistency of displaying WHT info with lot of withholding tax information, this note is applicable upto Release 470. We are on ECC 6.
    Regards

  • Calculate tax in Vendor Down Payment

    Hi,
    While posting down payment to my service vendor including service tax amount in F-48 after tick the calculate tax also, it is not asking for tax code and it is not showing service tax seperately. Only vendor a/c and bank a/c's are simulating. Please tell me how to calculate tax while doing vendor down payment.
    Regards,
    Prasad

    > Hi,
    >
    > Thanx for ur reply, every month we are paying through
    > advance payment for internet connection including
    > service tax and this is fixed amount.
    1. Enter vendor down payment - gross amount (do not calculate tax)
    2. Post a recurring document to your vendor account which will include the lines:
    C Vendor
    D Internet charge expense account
    D tax
    3. Allocate invoice with down payment

  • Withholding tax in vendor down payments

    Hi Friends,
    While testing a scenario of withholding tax and vendor down payment
    When Vendor down payment recorded with WHT;
    For down payment document Vendor line item report (FBL1N) shows withholding tax amount in withholding tax amount column, withholding tax report S_P00_07000134 is showing the down payment document with correct tax amount.
    When the above Vendor down payment cleared;
    For the cleared document Vendor line item report shows zero in withholding tax amount column, and the withholding tax report S_P00_07000134 is also showing neither the cleared document nor the down payment document.
    If the cleared down payment is reversed;
    Vendor line item report shows withholding tax amount in withholding tax amount column, withholding tax report S_P00_07000134 is showing the down payment document but with zero tax amount.
    Also the WHT amount in vendor line item report in column withholding tax is being displayed without a minus(-) sign indicating a debit amount, but this amount is in fact not a debit amount, when this column is sum up it gives incorrect total.
    Please share your experience on such scenario.
    Regards,

    Hi MAURIZIO,
    Thanks for refering the SAP note, but this note speaks of inconsistency of displaying WHT info with lot of withholding tax information, this note is applicable upto Release 470. We are on ECC 6.
    Regards

  • Vendor down payment request Error

    Hi all,
            i created a vendor down payment request using f-47. I had created a tax code for the country "AE" using FXTP. But when in the vendor down payment request it is not picking the tax code,giving the error "Tax code AN for country AE has been deleted or incorrectly changed", Message no. FS201
    Kindly help me,
    Thanks in advance
    Ani Varghese

    Hi,
    The reason behind this error is that the TAX CODE IS NOT CORRECTLY MAINTAINED.
    You might not have maintained the GL Accounts for this. Maintained it in OB40.
    Regards,
    Amit

  • FS206 error message for vendor down payments

    Hi All,
    I m getting following error message while posting vendor down payment using F-48,
    Down pmnts with taxes are not permitted when processing with jur.code
    Message no. FS206
    Diagnosis
    Taxes may not be entered for down payments with the jurisdiction code taxation procedure.
    Procedure
    Change the master record of the reconciliation account for down payments. It may not be tax-relevant (leave tax category blank).
    I made the tax category in GL master data as blank. However it is still asking for a tax code.
    Kindly let me know if anyone has faced a similar issue earlier.
    Thanks in advance!
    Best Regards,
    Aman Goel

    Hi,
    Change the "Alternative Reconciliation Account" master data (in FS00) for down payment assigned to your vendor reconciliation account.
    Leave the tax field blank and do not check mark posting without tax allowed.
    Regards,
    SDNer

  • Error in profit center determination for settled vendor down payments

    Hello All,
    When we try to settle vendor down payments an error is detected for the profit center determination .
    The settled down payment is found on the dummy profit center instead of the profit center of the original invoice. This means that the reporting of oustanding payables per profit center is wrong
    When you only see the invoice and not the settled down payment which should reduce you outstanding debt (down payment already paid).
    Can any one help in this matter
    Regards
    Arun

    Hi,
    Check the document splitting configuration. Advances to vendors recon.. account should be assigned as category 'Vendor 'special gl transaction''.
    Check the document type 'KA' transaction as '0300'... or unspecified posting.
    Thanks,
    padmaja N

  • Tax code mandatory in vendor down payments

    Hello,
    I am posting a vendor down payment with a bank account not relevant for taxes, but when I enter the amount of the down payment in item 2, posting key 29A, the tax code is mandatory
    How could I change it?
    Thanks a lot

    Check two options
    1. Goto to FBKP-> Special GL -> Clear the tax column in the special GL for downpayment screen.
    2. Check out the field status group of the reconcilation account. FS00-> 3 rd tab -> Double click on the FSG and check if the tax items.
    3. Check out the Field status Group of the Account group in which the vendor is assigned.

  • Vendor Down Payment in Cash through F-02

    Hi All,
    When I am entering Vendor Down Payment made in Cash through F-02, it is not passing entry for WHT(TDS). It gives following error "Withholding tax amount exceeds total bank line item amounts"
    Pls suggest if there is other alternative wherein I can enter the vendor down payment made in cash with WHT (TDS) entries.

    Activated the option of "Cash Flow" in Bank Account Master ( T.Code FSS0).
    It worked.

  • Vendor down payments with TDS

    Hi Experts
    I am trying to make vendor down payment with deducting Withholding tax through transaction code F-48. At the time of simulating of the same system is giving error message
    "Withholding tax amount exceeds total bank line item amounts.
    Message no. 7Q320"
    All configuration has been done like tax code and tax type for down payment and assinment of GL account.
    Kindly advise as on urgent basis.
    Kuldeep Dubey

    Hi
    Check the Total Debit & credit for that document
    the normal JV for TDS entry in F-48 is
    Vendor Dr 10000
    Bank    Cr 7734-
    TDS - B     Cr 2000-
    TDS - S       Cr  200-
    TDS - C        Cr 66-
    hope its useful ........assign points if found useful
    Regards
    R.Ramakrishnaraj

  • Vendor down payment clearing without VAT posting.

    Hello SAP Gurus,
    I have following issue:
    Currently our Vendor down payments produce VAT postings when clearing with final invoice, which is correct.
    But we have some old vendor down payments which does not include VAT and needs to be cleared without any impact to VAT postings.
    User is using F-44 transaction and can not define any tax code for postings, system calculates it automatically.
    It is not possible to make VAT posting happen and then make reversal postings fot VAT accounts as well.I tried to check flag 'Posting without tax allowed' and uncheck 'Post automatically only' in account master data. And then make manual posting using that account via FB01 but system still requires tax code to be entered because Tax category in account master data is set to '<' I'nput Tax Account'. It is impossible to change Tax category let's say to ' * ' because account have balances on it.
    Could anyone advice how can I clear these downpayments without VAT posting?
    Thank you,

    I have tried to enter 0% input tax code, but still I'm not able to post document because of error msg:
    Tax entry not possible in this item
    Message no. FF724
    Diagnosis
    You can not enter a tax amount in this item since, due to the posting amount entered and the tax code, a total tax amount of zero has been calculated.
    This could either be due to the fact that the tax code has been defined with a value of 0%, or because the posting amount entered (that is, the tax base) is too small.
    Example:
    With a tax rate of 15%, a tax amount greater than zero will only be achieved with a base amount greater than 0.04. With values of 0.03 and less, it is therefore not possible to enter a tax amount.
    Procedure
    Only enter tax amounts in conjunction with tax codes for which a percentage rate not equal to zero has been defined. Make sure that in documents with several G/L account items you enter the total tax amount in an item with a sufficiently high posting amount.

Maybe you are looking for