Witholding Tax Information system (J1INMIS) Not updating (FICA)

Hi Experts,
   We are using ECC 6.0 recently we upgrated with EHP 5. And the current system (FICO) is working fine with TDS calculations and Witholding Tax Information system (J1INMIS) gets updated perfectly.
We are implimenting FICA (student Accounting). FICA has a provision to calculate the TDS so all TDS Calculations done in FICA.
While we transfer the data from FICA to FICO all GL's gets update even TDS GL also getting update. But when I Check the Report Witholding Tax Information system (J1INMIS) the TDS calculated from FICA is note appearing in this report. But appearing in TDS GL's.
I assume  FICO system will not have any Vendor information because In FICO all vendor balances will get update to only reconciliation key as vendor are in FICA system.
Another problem is how I can take TDS Certificates for vendors If the Tax Information system doesn't update.
Please suggest.....
Kind Regards,
Shivaji

To get TDS certificate we use T code J1INMIS, Pls dont go to This T code: Follow this:
1. J1INCHLN
2. J1INBANK---Bank no, will be Check Issue A/C.
3. J1INCERT----In this document date should be end of the month date exampl=31/03/2011
After giving all the details in J1INCERT
select - Ctrl S (Save the document_
you will see the below screen (Variant) give variant name XXX Description (Check Printing)
save, you will get 16A Form.

Similar Messages

  • I just got my new macbook today but i just found the system is not updated

    I got my first macbook today but i just found the system is not updated ( the system is OS X 10.8 (12A269), is that normal? now, im trying to update the system but I got three times unsuccessful updates. Should I pay for it? If I should, how come there is no pay option?

    You shouldn't have to pay for anything - if you have 10.8.0 installed, you should just be able to go to Software Update under the Apple menu and the system should prompt you to install 10.8.2. If that doesn't work, contact the App Store support site - http://www.apple.com/support/mac/app-store/.
    While waiting to hear from the App Store support folks, you can always download the 10.8.2 combo and install it - http://support.apple.com/kb/DL1581 - and then be sure to install the supplemental update - http://support.apple.com/kb/DL1600.
    Good luck,
    Clinton

  • Solaris 10 u8 system did not update daylight savings time

    I am running Solaris 10 u8 x86, and my system did not update for the daylight savings time change on Nov. 1, 2009. I am in the US/Mountain time zone. What should I do?
    Patch 141517-04 is installed, I assume it came with u8.
    Does this have something to with JAVA Time Zone updater? I saw this:
    http://java.sun.com/javase/timezones/tzdata_versions.html
    Shouldn't u8 take care of all this automatically? Do I have to somehow get TZUT 1.3.20? By contacting support? What?
    Any suggestions would be greatly appreciated.

    BTW, I'm running 64-bit Solaris as a VirtualBox (3.0.10) guest VM on a 32-bit WinXP host.

  • TAX_GROUP_BP_01 field in quotation in SAP CRM system is not updating at all

    Hi,
    when we create quotation in SAP CRM...there is tax conditon type in item level...where it has the field TAX_GROUP_BP_01...and this field value is not getting updated at all..Could you please anyone suggest us why this value is not updating in CRM system
    Thanks and Regards,
    Sudhansu.

    Yes thanks all.
    Even though the 'p_emp_number' was used as a vehicle (do I know what I'm talking about?) in the Create API's process I have setup working splendidly, for this Update process semingly having the line removed it did the trick.
    1 record updated as required.
    Many thanks to all..
    Steven

  • HT1338 my system will not update?

    my mac keeps asking me to update software and i do, however, when the installation is complete is has not updated and asks me again...

    Review the updates in the Software update window.
    If one of them is for Software Update itself, apply that one only (probably including a restart).
    Then try applying the others, one at a time.

  • Luminance information in loupe not updated when adjustments are appllied

    This problem is simple, I don't know why it worked in the previous version of Aperture and why it doesn't in Aperture 3. I use the luminance values to peg things like skin tones where I want them to be, like the zone system I guess, and I place the loupe over that part of the image and adjust the exposure until it reaches thel uminance value I want. For example, middle grey at 50%, caucasian skin 65% or so. This lets me control the values of whats in the photo, so its very much like the zone system.
    When I place the loupe over a part of the image it displays the luminance value, it does not however update that value when you apply an adjustment like it did perfectly in the previous version.
    I know putting the mouse over the image gives you that info but why should I keep mousing back and forth from the adjustment slider to the image, if the info is displayed in the loupe, its fine but Aperture 3 doesn't update it after adjustments.

    No, its been set to focus on loupe this whole time.
    Place the loupe over a raw image, look at the luminance value, then decrease the raw exposure and see how it doesn't update. If you toggle the loupe on and off it updates. Thats my complaint. And I'd like to see that info in the histogram like in Lightroom and Photoshop. It would be great to see that info immediately.

  • System Time Not Updating When Sleeping.

    If I put my iMac to sleep, the system time does not appear to be updated until I manually wake the computer. For example, it I put the computer to sleep at 1:00PM and then manually wake it up 15 minutes later the system clock will display 1:00PM for the first few seconds and then jump to 1:15PM.
    The only reason this is a problem is my scheduled wake ups are not working and i suspect this behavior may have something to do with it. Is this normal behavior?

    still experiencing the problem with the delayed or out of sync time and also having the issues of not receiving phone calls, text messages, and voice mail messages at the time of call or when the phone is on. time is usually 12 - 27 minutes slow, i've actually clicked the top button and the time showed 1:27PM and noticed I missed the call at the same time. essentially, i am not receiving my phone calls (i literally answer about 1 out of every 9 calls). the genius bar is no help, giving me the good ol suggestion of "replacing" my phone for a mere "$199" when they really should be saying, get a new phone. if you have the same problem with the 2G iPhone, I implore you to add your story about your problem to the thread.
    Thanks,
    VJ.

  • System does not update...

    The problem is that I cannot install system updates.
    App Store notifies me about new system updates, I click "Update" it shows a progress bar for half a second, then behaves as if it is installed successfully and shows it in "installed for the last 30 days". But nothing really happens. When I do it again, I get the same result, and see the same another "successfully installed update" below.
    Other updates (not system) install normally.
    What I did to solve the problem:
    1. Tried to download update manually (10.10.2 combo update) and run installer. The same behavior, all good (but too fast), asks to reboot, nothing happens
    2. Dowloaded the Yosemite 10.10.2 full installer (through App Store/Purchases), installed it over my 10.10.1. It did update, now I have 10.10.2, but other system updates behave the same way (can't install Remote Desktop Client update and new HP 3.0 update e.g.)
    Don't have clue what to do next...
    MacBookPro8,1
    Intel Core i7, 16 Gb RAM

    Try resetting the App Store and Clearing Cookies.
    Reset       Learned from Old Toad

  • Windows 7 64 Bit system will not update to iTunes 7 - Help please!

    Hello -
    I've been trying to update my iTunes since July and have been unable to do so. I think the last time I installed a version of iTunes was in May. I've tried everything and anything I could find on the web but nothing works!
    I have a Windows 7 PC 64 bit laptop.
    Everytime I try to update I get the error message "the installer encountered errors before the installation could be completed".
    I've already tried:
    - Downloading directly from apple site
    - Downloading the update only then installing
    - Made a new user account on my computer to try install
    - Uninstalled everything and started fresh
    - Disk Clean up's
    - Turned off Anti-Virus
    - Restarting computer and more...
    Does anybody have any suggestions!? It's driving me crazy not being able to sync my iphone 4! I'm starting to think it's just not compatable...
    PS - I am able to install older version of iTunes, but my iphone 4 is not compatable since i've upgraded to iOS6

    Hi rrfhp,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I understand none of the HP drivers will fully install.
    I will be happy to help you.
    Are you signed in as the Administrator of the computer?
    I would turn off all start up programs to make sure there isn't something blocking the printer.
    Click on start, in the search box type in run, enter, then type in msconfig, click OK.
    Click the Services tab.
    Click to select the Hide All Microsoft Services check box.
    Click Disable All, and then click OK.
    Then click on the start up tab at the top.
    Click on disable all.
    Reboot the computer.
    Temporarily turn off any Antivirus software.
    Then run the installation again by right clicking on the setup and selecting run as Admininstrator.
    Don't connect the USB cable until prompted.
    Try printing now.
    Then go back into msconfig and enable the All Microsoft Services and enable all on the start up tab.
    Turn the Antivirus software back on again.
    Please let me know the results if you are still having issues.
    Are you getting any error messages?
    Thank you for posting on the HP Forums.
    Have a nice day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Retina Macbook software update system preferences not updating.

    I have a brand new retina 13" MacBook Pro but for some reason software update is stuck. In system preferences it reads "Last update on Monday March 18, 2013". Even though I click update now then it checks the app store and there are no updates in that section it always shows that Monday date never the current date.
    Anyone know how to fix this?

    It's telling you the last update was applied Monday March 18, 2013 and that there are no more updates right now for your machine.
    You don't need to manually check, it will nag you about updates automatically.
    If you need the current date and time, there are plenty of apps and/or the Finder menu clock to tell you that.

  • RPUQSTC0 - Witholding tax update

    Hi all,
    I need to update Swiss witholding tax information for 2007 and I find out that I can do it with the files from Cantonal Tax Office and the report RPUQSTC0.
    I have the files but I can't find documentation regarding the report.
    Where can I find more information?
    Regards.

    Hi,
    The reason could be, end user may entered the TDS line items manually, instead of automatic update.
    I will tell u the situation clearly.
    When we try to post an invoice, system will pop up for TDS data, if we press ok, it will calculate automatically. If it was posted automatically, then the same information will be updated in WITH_ITEM table. You can get this information, whether it was entered manually or automatically by using t.code:FB03
    Enter the relevant document no, then click on With holding tax  Tab available in menu bar.
    If you can find the data in that box, it was updated automatically, if that box was blank, then it is sure that end user entered that TDS line items manually.
    If you need any further clarification call me on mobile. We had this issue long back.
    If it was entered manually, the only solution is to reversal.
    Otherwise they has to issue to manual certificates to the vendor.
    All the best
    Prasad
    9848682357

  • Withholding tax amount is not updated in with_item table

    Dear all,
    In our system, one vendor invoice posted through FB60. In which, system generates withholding tax lin item. The same line item shows in BSIS and WITH_ITEM tables. It also shows in GL account line item display as open item. But, in WITH_ITEM table system not calcuate tax amount and shows as nil withholding tax amount against withholding tax base amount because of this I will get error at the time of creating challan through J1INCHLN.
    Please help us though there is statutatory payment due date.
    Regards,
    Kalpik

    Hi Raghvendra,
    Thanks for reply. Why system is not update withholding tax amount only for that particular document ?
    So, we can take precaution in future also.
    Regards,
    Kalpik

  • Supplier information not updated in SC

    Hi,
    Kindly clarify the below points,
    Once
    the SC reached SOCO, the Supplier is assigned in the SOCO Screen for that SC
    and the Follow-on-document is created. 
    When I check the BBP_PD transaction after that
    to see the detail, the supplier information in the partner table is not seen or
    updated.
    Is this a standard functionality ? Yes, then I
    could I fetch the supplier if I needed.(i.e Technically get the supplier information).
    Is this a standard behaviour, and the changed at Date information is also not updated.
    Kindly help me on this.
    Thanks in advance.

    Hi Tamil,
    you should call META_PO_GETDETAIL on SRM site.
    System will choose the right rfc function module for backend according to its version.
    It's so called driver approach in SRM.
    Regards
    Konstantin

  • MRKO-No tax information found-Pls find the NOTE in Thread

    Hi ALL,
    While MRKO settlment I am getting an error " No tax information found".
    Note :
    Consignment inforecord with TAX Code Maintained
    Checked in Goods issue table RKWA Tax code Picked up.
    Condition records in MEK1and FV11 Maintained for tax
    Material or info record is not flagged for deletion
    The same data i have in quality and that is getting settled and why not in Production ?How can I make settlment do I have missed some thing?

    Hi ,
    There may be a possibility that the Tax code is not updated at Table Level .
    Just check the table EINE with Info record category --2
    Regards
    Ramesh Ch

  • Vendor Witholding Tax Error

    Dear All,
    While doing entry in FBCJ for business transaction type  vendor payment i am getting the following error.
    "Witholding TAX  information  missing from line item" Message No:7Q301.
    Also on F-47 i am getting the same error.
    I have maintained Withholding tax details in vendor master.
    Kindly guide me.
    Girija

    Hi Gurus,
    I am having the same issue.
    My client will give the advances to vendors and they will deduct in instalment basis.
    The problem is at the time of advance payment tds is deducted at 2% Now the currrent rate is 3%.
    I changed the tax code in vendor master and posted invoices, Whenever i am going to clear the invoice it is given error Withholding tax incosistancy.
    I execueted RFwt010 program  Now i am able to adjust the advance.
    But it is not allowing to reverse the TDS.
    Regards,
    Prasad.

Maybe you are looking for