WLan fails to connect after sleep mode - Satellite T110-10x

Hi,
Everything works fine, wireless connected.
After sleep mode - it fails to connect although it detects my wireless network.
I've tried the latest Realtek driver, still no good.
I've verified that my setup is not to turn down wireless in the power options.
Any idea?

Hi
Where did you find the latest WLan driver?
Here on this Toshiba driver page you can find the latest Wlan driver:
http://aps2.toshiba-tro.de/wlan/
I recommend uninstalling firstly the old driver and then to install the newer version.
Furthermore its necessary to update the BIOS. I read in the forum that similar issues could be solved by BIOS update.
Greets

Similar Messages

Upgraded to lion now my wi-fi loses connection after sleep mode, it still shows as connected but does not go out to the internet. Please help

After I upgraded to lion I have been having constant issue with my wi-fi after sleep mode. I close the lid and when I reopen I open safari and cannot connect to the internet. Wi-fi is on and I am connected to my router, but it doesnt seem to be on the internet. Now how I resolve this issue is turn of the wi-fi and turning it back on, then i am back on the net. this is mos-def a bug i have never had that problem with snow leopard. Please assist or provide hot-fix

I have the same issue and have to cycle the wireless modem on the laptop. Doesn't matter if I'm on a preferred netowrk or no, or if I stay on the same network or move. I come out of sleep, I have to cycle the modem.
It's not life threatening, or anything, but it's a hassle. I didn't have the issue with Snow Leopard.

Airport express fails to connect after sleep

Hi there,
does anyone know what to do to solve this problem. My G4 has been switching between wireless netwroks effortlessly for ages. Over the past few weeks I'v been having the following problem with wireless connections everywhere. If I put my laptop to sleep (or if it goes to sleep) or if I change between wireless networks my G4 will not renew the IP address. It finds and logs onto the wireless network, but just will not get a usable IP how ever hard I try. The only way I've found to fix this is by turning the G4 off and back on again.
Any ideas anyone????

I also have a G4 with the same problem. I am on 10.3.9. I wonder if that is a hang up...I never had this problem with my previous airport, but since getting the new base station so I could play airtunes, this has been an issue. It seems in the past I could scan for the network again and reconnect if their was an interruption, but I can't seem to do that either...
G4 Mac OS X (10.3.9)

Ethernet Not Connected After Sleep Mode

When my computer goes to sleep and I wake it up again the ethernet port shows up as not connected in System Preferences / Network. I have tried unplugging it and replugging ir back in, disabeling other network adapters like wifi, resetting pram and can't think of any others to try.
The issue has been going on for almost 2 years. On my MacBook Pro I have had this issue for a while. Both in 10.7 and 10.8 versions of the OS.
The only thing that works is to reboot the computer and we are good again.
Any ideas on what to try next or what tis going on?
Brandon

Hi tspinson,
It appears you are experiencing issues with your bluetooth keyboard. That does sound troublesome. To help you resolve this, I have linked to an article that offers troubleshooting suggestions:
Troubleshooting wireless mouse and keyboard issues - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Having problems connecting to WiFi after Sleep Mode - Lion with most recent updates.

I'm new to Apple and have the new MBP - what a great machine!
So, I updated to Lion and have done all the updates for my OS. As of recent (after an update last week), I am having trouble connecting to the internet after I close my computer (Sleep) or Sleep mode due to inactivity. The only way to connect after said mode is to completely Restart the computer and then my problem is fixed. I've tried searching, but can't find anything. Any suggestions are welcome.
Thank you

William Rivas wrote:
William Rivas wrote:
William Rivas wrote:
Linc Davis wrote:
Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. Repair permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reset the System Management Controller.
9. Reset the PRAM.
10. Reinstall OS X.
Updating to 10.9.2 did the trick. So I thought. Does anyone have a solution?
Thanks!

Lion autoconnecting after sleep mode, lion autoconnecting after sleep mode

It's really frustrating that my Mac 9/10 times won't reconnect after sleep mode.
Is there something I can download to fix this please.

This should be filed under "What Worked for Me". For me this turned out to be a simple fix for a tough problem. Maybe someone else can benefit from my experience so I'm dropping this into the forum to be searchable.
The short answer is to try putting your WiFi station on a low channel number. It fixed my reconnect problem permanently. I can only speculate about why this works, but it's easy to try.
Long version- Fails to autoconnect after sleep, own station not listed in wifi dropdown list.
After almost a year of flawless reconnect, my iMac* suddenly began failing to reconnect or even list my SSID after waking from sleep. It showed everything else in the neighborhood, but my own station had been blacklisted somehow.
I could get a connection eventually, but it took 10 or 20 or more on/off cyles of the wifi radar symbol. It got to be very annoying. All the other computers including macs and PCs and ipads that visit my house had no problem. This included a MacBook with the same operating system (but a different wifi card).
I didn't write anything down at first so I'm not sure if it was triggered by an update. It might have started after some of my neighbors bought new routers.
I tried all the suggestions I could find on all the forums, including clearing the keys from key manager, clearing the preferred stations, etc. No luck. Sometimes it would reconnect immediately but the next time it could be very stubborn.
I knew I was getting closer to the snag when I read about 802.11d and country codes. I looked in the system log (kernel.log) with the console and found these lines repeated:
Mar 23 11:49:52 ZZZZZ-iMac kernel[0]: 72833.117059: performCountryCodeOperation: Not connected, scan in progress[0]
Mar 23 11:49:53 ZZZZZ-iMac kernel[0]: en1: 802.11d country code set to 'TW '.
Mar 23 11:49:53 ZZZZZ-iMac kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 56 60 64 149 153 157 161
I definitely do not live in 'TW '.
The number of times this message appeared exactly matched the number of retries that were necessary. The last entry would have my own country code (Finland) and a much longer list of supported channels:
3/25/13 3:10:21.000 kernel: en1: 802.11d country code set to 'FI '.
3/25/13 3:10:21.000 kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
There are three (illegal ?) routers in my neighborhood advertising TW as the country. (Taiwan maybe?) I discovered how to see the country codes from my neighbors' routers:
(Apple) -> About This Mac -> More info… -> System Report … -> Wi-Fi
Press the Wi-Fi label in the list on the left, not the one on the right-hand side that shows if you hit "Network".
I have an Airport Extreme dual band, and had the 2.4 Ghz on channel 13 and the 5 Ghz on channel 48, to stay clear of other channels in my neighborhood. I began to suspect that these channels may be overlooked or at least given last choice because they were not in the Supported Channels list for TW.
The behavior of protocol 802.11d is to scan for a country code from one of the nearby routers. The question is, what is the search order? You would think it would start with your own router, but maybe they were not on the list because the channels I picked are not valid in all areas. Or maybe it just starts on channel 1 and mine came in last at 13.
So I dropped the 2.4 Ghz channel to channel 2. Immediately the connection became 100% reliable. My explanation could be bogus, but it has worked reliably all week, not a single failure, which means about 30 restarts from sleep, plus a lot of manually run on/off sleep/wake cycles. Before this fix, I could knock myself offline with just one on/off cycle.
Unanswered questions: This is a desktop machine, so why is it so worried that I may have moved to another country since the last session an hour ago? Why can't I set the country code manually?
p.s. Just as one last check I just now switched back to channel 13. It took 10 tries to connect. Back to channel 2, connected immediately.
*configuration info
iMac 21.5 inch mid 2011, OS X Lion 10.7.5
WiFi Card Type AirPort Extreme (0x168C, 0x9A),
Firmware Version: Atheros 9380: 4.0.67.5-P2P
Locale: RoW (?? Does this mean "Rest of World"? I think it should be ETSI, European something or other.)
Maybe this will work for somebody out there.
Jim

Macbook pro runs really slow after sleep mode

My MBP ( MacBook Pro (13-inch, medio 2012), 2,5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, Intel HD Graphics 4000 1024 MB), runs very slow after sleep mode. I notice that when I wake it up, my memory usage is nearly 8 GB. After a restart it is back no a normal level, between 2 and 5 GB depending on how many programs I am running. Any ideas what causes this? My IOS is Yosemite 10.10.2
Kind regards

Hi Japib
Thanks for your reply. Here is my report:
Problem description:
macbook pro is really slow after sleep mode
EtreCheck version: 2.1.8 (121)
Report generated 4 februari 2015 20:56:34 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
    MacBook Pro - model: MacBookPro9,2
    1 2.5 GHz Intel Core i5 CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 172
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 1:36:41
Disk Information: ℹ️
    APPLE HDD TOSHIBA MK5065GSXF disk0 : (500,11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 498.88 GB (292.17 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 499.25 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
    Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Application Support/Hotspot Shield
    [not loaded]    com.anchorfree.tun (1.0.1) [Click for support]
        /Library/Application Support/Kaspersky Lab/KAV/Bases/Cache
    [loaded]    com.kaspersky.kext.kimul.44 (44) [Click for support]
    [loaded]    com.kaspersky.kext.mark.1.0.5 (1.0.5) [Click for support]
        /Library/Extensions
    [loaded]    com.kaspersky.kext.klif (3.0.4a41) [Click for support]
    [loaded]    com.kaspersky.nke (1.6.4a15) [Click for support]
        /System/Library/Extensions
    [loaded]    com.hzsystems.terminus.driver (4) [Click for support]
    [not loaded]    com.olympus.CamBlockCommandsDeviceUP (3.1.0 - SDK 10.6) [Click for support]
    [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
    [not loaded]    com.sony.driver.prs2 (1.0.3d1) [Click for support]
    [not loaded]    com.wacom.kext.pentablet (5.3.3 - SDK 10.8) [Click for support]
        /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
    [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
Launch Agents: ℹ️
    [running]    com.epson.Epson_Low_Ink_Reminder.launcher.plist [Click for support]
    [failed]    com.epson.esua.launcher.plist [Click for support] [Click for details]
    [running]    com.epson.eventmanager.agent.plist [Click for support]
    [running]    com.kaspersky.kav.gui.plist [Click for support]
    [not loaded]    com.sony.ReaderDesktop.RunReaderDesktop.plist [Click for support]
    [not loaded]    com.trusteer.rapport.rapportd.plist [Click for support]
    [running]    com.wacom.pentablet.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.anchorfree.ajaxserver.plist [Click for support]
    [running]    com.kaspersky.kav.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
    [loaded]    com.tunnelbear.mac.tbeard.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
    [loaded]    com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Programma (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Documenten    Map (/Users/[redacted]/Documents)
    uTorrent    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 7 Update 60 Check version
    WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
    AdBlock
    DuckDuckGo
    Save to Pocket
    Awesome Screenshot
    URL Advisor
    Virtual Keyboard
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Squeezebox [Click for support]
    Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 498.88 GB Disk used: 206.70 GB
    Destinations:
        My Passport [Local]
        Total size: 999.83 GB
        Total number of backups: 17
        Oldest backup: 2013-11-06 17:55:38 +0000
        Last backup: 2014-10-14 11:30:39 +0000
        Size of backup disk: Adequate
            Backup size 999.83 GB > (Disk used 206.70 GB X 3)
Top Processes by CPU: ℹ️
        15%    mds
         5%    WindowServer
         0%    ocspd
         0%    fontd
         0%    kav
Top Processes by Memory: ℹ️
    223 MB    kav
    198 MB    Safari
    155 MB    Mail
    137 MB    mds_stores
    77 MB    WindowServer
Virtual Memory Information: ℹ️
    3.45 GB    Free RAM
    3.05 GB    Active RAM
    1.11 GB    Inactive RAM
    974 MB    Wired RAM
    1.64 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Feb 4, 2015, 07:21:16 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/EPSON Software Updater Agent_2015-02-04-192116_[redacted].crash
    Feb 4, 2015, 07:18:08 PM    Self test - passed
Hope this will shed some light on the problem.

I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
          Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading
          Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
3. Reset the PRAM.
4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
7. Repair permissions on the startup volume.
8. Turn off Bluetooth and test.
9. Reset the System Management Controller.
10. This step shouldn't be necessary, but has been advised by Apple Support in some cases, apparently as a workaround for a bug. Open the Energy Saver pane in System Preferences. If applicable, click the padlock icon in the lower left corner to unlock the settings. Enter your administrator login password when prompted.
Select the Power Adapter tab and uncheck the boxes marked
          Wake for Wi-Fi network access
and
          Enable Power Nap...
if present. Then, if the computer is a MacBook, select the Battery tab and uncheck
          Enable Power Nap...
11. Reinstall OS X.

Imac running slow after sleep mode

not sure what's going on but i can't use sleep mode on my imac 2010 sl
whenever it wakes from sleep mode it is so slow, even typing an email i'll get the flywheel coming up and a delay in the words i'm typing. every application is slow, i have to a restart for it to start working normally again.
my wife has the same problem with her macbook pro of similar vintage and os.
anyone else have this problem and know a solution?

I too have been noticing problems in slow behavior after sleep mode. It has gotten so bad I have been restarting it regularly or shutting down much more regularly. It behaves almost like normal after a re-start.
It is almost like the hard drive is failing? Last time this happened I put a new HD in. I am usually running a large number of different programs, always multi-tasking, which has been a mac fortie. Seems worse with the last few updates. My I mac is 24" imac 2008 model. replaced drive just before apple care expired.
Razz

Mbp running slow after sleep mode

My MBP runs extremely slow after sleep mode (closing lid). It seems like Safari will take up much RAM. But I use a memory freer which supposedly should solve the problem. So after all I am not sure what is the real cause and what could solve this.
BTW it runs normally after a reboot.
Mine is a mbp 13" refurb purchased in March, 2012.
Processor 2.4 GHz Intel Core i5, 4GB RAM

I too have been noticing problems in slow behavior after sleep mode. It has gotten so bad I have been restarting it regularly or shutting down much more regularly. It behaves almost like normal after a re-start.
It is almost like the hard drive is failing? Last time this happened I put a new HD in. I am usually running a large number of different programs, always multi-tasking, which has been a mac fortie. Seems worse with the last few updates. My I mac is 24" imac 2008 model. replaced drive just before apple care expired.
Razz

Yosemite upgrade: function keys no longer work, no keyboard lights and have to sign in twice after sleep mode. Anybody else having these problems?

Hi,
Since I did the Yosemite 'upgrade' last week I have been having problems with my MacBook Pro that never happened before. The most frustrating problems involve my keyboard which doesn't light up (checked my settings and they are correct) and the top row of function keys don't do anything so I can't adjust the volume, brightness, etc. Then if my screen goes into sleep mode, when I wake it back up I have to sign back in twice - I never had to sign in at all after sleep mode before.
I'm finding that in order to get it working properly I am having to completely shut down and start up again but when the keyboard problems are happening I can't get anything on the apple dropdown to work either (i.e. shut down, restart, etc) so I can only shut down by pressing and holding the on/off button.
I've never had problems with my Macbook before and feel like Apple have completely ruined it in one update! I've had a look through other posts on here but can't find anybody else having these problems so I would be really grateful if anyone could help me and offer me some advice on how to sort it out.
Thanks!

Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

Try this:
clone your system and repair it with Disk Warrior instead
Or try a clean test system install on another drive
A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
Try to run w/o externals. MyBook included.
Is that a 7200.11 1TB? they had a lot of issues.
Run AHT off your OEM DVD.
2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current. Hopefully you have a UPS and is 1500VA unit.
When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
TimeMachine has its own bad habits, especially with Green drives and some externals.
Try to rule out everything and then add back one at a time.
And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old. Might want ATI 5870 or 5770.

No video after sleep mode.

Brand new home built system (all new components unless noted otherwise) running Windows 7 64-bit Home Premium on the following hardware:
MSI X58 Pro-E motherboard,
Intel Core i7-920 (2.66) CPU,
Enermax PRO82+ 525W powersupply,
Sapphire ATI HD5670 1GB GDDR5 PCI-E video,
8GB Corsair 1333MHz RAM,
WD Velociraptor 150GB 10,000 RPM boot drive,
WD 500GB Caviar Black for file storage,
Plextor DVD-RW,
CoolerMaster case.
Older Viewsonic VP2030B monitor,
Older Microsoft Desktop 6000 V2 keyboard/mouse.
With standard Windows 7 power saving features enabled, the following
intermittent problems occur:
After the system has gone into sleep mode, the video card provides no signal to the monitor. Moving the mouse or touching keys on the keyboard obviously bring the system back out of sleep mode, but no video signal is received. Unplugging the DVI-D
cable from the card results in the Windows sound indicating a change. Plugging it back in, results in a Windows sound indicating the change. This happens when you unplug one end of the cable, it doesn't matter if it is at the monitor end or the video card
end - as long as the other end is of course still plugged in. The only resolution to this "no video" state is to reboot the computer with the power or reset button.
On some occasions when turning the PC on, there is no video signal. The system boots properly (although the BIOS screen takes about 15 seconds to appear - something MSI says is OK), and can be shut down with the correct keyboard sequence. The monitor
runs through VGA, DVI-A and DVI-D, but no signal is ever received so it goes into standby mode.
When the computer boots properly, usually while it is still loading Outlook (which is set to start automatically), the screen goes completely blank for 5 or more seconds, then comes back on and the monitor menu indicates that it is running at the correct
resolution, and then the video works correctly from there on in - unless it goes to sleep.
On some occasions, when recovering from a "no video after sleep mode" incident, everything on the screen has been moved towards the upper left side of the screen. The Outlook window which is normally quite large (80%) and centred on the screen has been reduced
in size to about 50% and shoved into the top left corner. Also, the 4 gadgets that normally run vertically along the right side of the screen have been moved up and towards the middle of the screen, one or two of them often overlap others.
Things I have done/tried:
All Windows 7 updates,
All motherboard BIOS updates,
All video card drivers and software updates from ATI,
Replaced the DVI-D cable,
Uninstalled the video card and drivers, and moved the card to a different PCI-E slot,
Replaced the video card with another Sapphire ATI HD5450 card (temporarily).
Sapphire thinks it's a hardware problem with the original card, but since temporarily replacing it with another card, the problems continue, so I doubt that is the issue. (Plus I have to pay $25 to ship the apparently defective - under warranty card - back
to them.)
These problems have happened intermittently since the system was built in January 2010 and they seem to be quite random, sometimes not happening for weeks, other times happening every few days. Sometimes the system is in sleep mode for 1/2 hour and it happens,
other times it is in sleep mode for hours and it happens (or doesn't).
Any help would be appreciated.

Hi again,
OK, I finally got around to trying this. I still have to check if that actually fixed it, but I managed to get into the "Factory" OSD screen.
I had my system running, disconnected my new monitor and plugged in the flaky old Viewsonic. I then:
1. Depressed and held down the #2 button, then depressed and held down the Power button,
2. Almost immediately the amber power light turned-on, the backlight turned on and the output image from the PC showed up.
3. The On Screen Display (OSD) for all the monitor setting came up (at the bottom of the screen instead of the middle where it normally is), and underneath the Main Menu window in the OSD, along the bottom of the overall OSD window, the word "Factory" appears
in the middle between the control button keys (#1 for exit, and #2 for enter). (It's not normally there.)
4. Using the down arrow key on the face of the monitor, I highlighted the "Factory" menu item, pressed the #2 key and voula! there was a whole new simple white text on bright blue background window, which among all sorts of settings included "Factory Reset"
(which is the default selection).
5. I pressed #2 again to accept and it was done.
All that is left is to do is some user testing to see if the monitor behaves as new.
Additional informtion: in the top of the "Factory" menu it reads: "LOVP AU Ver.0.36"
I took photos of everything and will post them on my Flickr account. To find them go to wwww.flickr.com, click on the search button, then on the next screen click on the People tab, enter my name and click search.
Thanks again for the advice.
Tom

Memory RAM upgrade won't wake up after sleep mode

i just recently purchase a pair 16GB RAM of crucial CT2K8G3S160BM for newegg.com. Yeesterday i try put this on my macbook i7 intel 2.9 processor that crucial said is compatible. but found out everything was good until i close my mac lid for hibernate. What happen is, it won't wake up no matter what i do until a way of reset SMC. BTW i try stick by stick to plug in together with my original 4gb RAM together found out 1 was ok and other one was not. But somehow why the info of hardware show that memory ram 16GB was installed and was OK. Everything was run smooth even booting. The only problem is won't wake up after sleep mode. I already try reset smc, pram, delete startimage, delete powermanagement.file and also sudo hibernate 0-7. Did anyone had this same issue of me. I'm my curiousity will it be the bad ram or software problem.

i just google around and found this two both crucial ram. Both spec are the same but different model no.
CT102464BF160B 16GB and mine is CT2K8G3S160BM are this 2 same? but both same spec.
http://www.bhphotovideo.com/c/product/877010-REG/Crucial_Technology_CT102464BF16 0B_16GB_2_x.html
http://www.bhphotovideo.com/c/product/889298-REG/Crucial_CT2K8G3S160BM_16GB_2x8_ 204P_SODIMM.html

Ipod classic wont start up or reset after sleeping mode

Hi. I've just got a new iPod Classic 160Gb, one week old. Everything is fine except that it won't turn on after sleep mode is on. I cant do the restart. The iPod somehow does not response to the menu+start buttons at the same time. It however wakes to live when I plug it to the computer. But when not in use and after it enters sleeping mode I still cannot turn it on. The only option again is to plug it to the computer. This is not right...?? It has the latest software and I have reset to original setup through iTunes.
Anyone know how I could solve this problem? Could this be a hardware fault?
Robban22

Hi, did you ever find a fix for this? My iPod Classic has just done the exact same thing - red X, won't be detected on Windows, and won't go into disk mode (will go into Config mode, but I can't see anything in that mode that will help).
Would really like to be able to put this into disk mode so I can try to restore my files...

WLan fails to connect after sleep mode - Satellite T110-10x

Similar Messages

Maybe you are looking for