WLC 4402 - only present guest with web auth page once every (x) days

Hi all,
I am looking to migrate our guest wireless from a third-party system to the WLC.  Currently, we change our guest password (WPA2 PSK) every (x) days.  Each time the guest password is changed and connections are made with the new PSK, guests are redirected to a terms and conditions page which they must accept.  The MAC address is then cached and the page is not displayed again until we clear the MAC cache and change the PSK.
I can almost replicate this with web auth in passthrough mode on the WLC, but it presents the guest with the terms and conditions page each time they reconnect to the WLAN, whether it be from roaming offsite or turning the wireless radio off then on.
Is there any way to have the WLC replicate our current system, where a MAC is cached and the page is not displayed until some other event takes place (changing the PSK or clearing the cache?)
Thanks!
-P

Wait ... Shaoqin, will the 7.5 code be released for the 4400 series controllers?  The current release is 7.0.240.0 - I see releases up to 7.4 on the 5500 series controllers
Thanks
-P

Similar Messages

  • Web Auth page not working on WLC

    I have a WLC 4402 and I upgraded the s/w from 4.1 to 4.2.176 since I did the web auth on my Guest wlan does not work. I can connect to the wireless ok and when I type in a web address I should get the web auth page but I just get "This page cannot be displayed". However if i type in the ip address of the WLC in the addrsss bar I get the web auth page and it work fine form then on. The web auth page worked fine on ver 4.1. Any ideas?

    I opened a TAC case this morning on this same problem, and my solution is what is listed above (config network secureweb cipher-option sslv2 enable)
    Basically, SSLv2 is disabled in 4.2. The Default is now SSLv3.
    Depending on your Internet settings, if IE is configured to use SSLv2, the webpage will not work.
    So in internet explorer, tools, internet options, advanced, There will be a checkbox next to Use SSLv2. (Even if Use SSLv3 is enabled, you still have the https issue).
    Basically, my issues was that a select few users could not Web authenticate and a select few admins couldn't HTTPS manage the GUI. Turns out in all cases, the computers that were all able to work, did not have SSLv2 enabled.
    By enabling SSLv2, all affected users now work (I think).

  • Having trouble with custom web auth page on 4404

    Hi all
    I am having trouble with a custom web auth page on my controller, we have edited the original file, but when we click login it goes to page cannot be displayed and it doesnt redirect to the page I want, however when I close the window and reopen it has already authenticated me.
    Has anyone got a copy of some working html code I can use ?
    cheers

    There is sample Web Authentication bundle avaiable for download from cisco.com. if you go to the software download page and go to Wireless->Standalone Controllers->4404 you should see a link for Wireless Lan Web Authentication Bundle.
    Its the same bundle whether you have a WiSM, 4404 or 2100

  • Firefox does not redirect users to web auth page

    I have a client that uses web auth for the guest wireless.  When a users opens up FF, it does not automatically redirect them to the web auth page.  However, IE and Chrome work fine.  If you copy and paste the redirection page into FF, it will go to the page then.  The only two possible solutions I have found are to either enable web auth proxy or regenerate the WLC self-signed cert. 
    Anyone have any other ideas? 
    TIA,
    Dan

    I've been trying to figure out a very similar issue where Firefox wouldn't open the guest webpage (the connection was interrupted) and finally found it was caused by opening Yahoo as my startup page. I change it to Google, for example, and it comes up everytime now. When set to Yahoo I could clear my cache and it would work once but then wouldn't work again. If I load Yahoo as the startup page in IE it works everytime. Very strange.
    Here's what the debug looks like:
    *webauthRedirect: Jul 23 20:59:33.793: xx:xx:xx:xx:xx:xx- received connection
    *webauthRedirect: Jul 23 20:59:33.794: xx:xx:xx:xx:xx:xx- received connection
    *webauthRedirect: Jul 23 20:59:33.795: xx:xx:xx:xx:xx:xx- received request
    *webauthRedirect: Jul 23 20:59:33.803: xx:xx:xx:xx:xx:xx- received connection
    *webauthRedirect: Jul 23 20:59:33.803: xx:xx:xx:xx:xx:xx- received request
    *webauthRedirect: Jul 23 20:59:33.806: xx:xx:xx:xx:xx:xx- received connection
    *webauthRedirect: Jul 23 20:59:33.807: xx:xx:xx:xx:xx:xx- received request
    *webauthRedirect: Jul 23 20:59:33.810: xx:xx:xx:xx:xx:xx- received connection

  • Multiple Web Auth Pages

    I have looked through the forum and think that I have found the answer to my question but I just need confirmation of my thoughts.
    We are using a 5508 WLAN controller running software ver 7.2.110.0 and LAP 1142n AP's.
    What I would like to do is to configure multiple guest WLANS for each of our regional offices. Each of these WLANS needs to be configured with a Web Auth page relevant to the office location. My question is this, can I have a Web Auth page for each location or just 2, the default internal page and 1 customised page?
    Thanks for any help.
    Murray

    Here is a link that explains it also
    https://supportforums.cisco.com/docs/DOC-13954#Lets_go_for_custom_
    Sent from Cisco Technical Support iPhone App

  • WEB-AUTH Page customization

    Hi, All can anybody let me know how can I customize the WEB-AUTH login page. If I want to put some image & background how can I do that ? do we need anything special software ..how can I download & upload page from Controller...how can I edit the Page...please help me to do this....
    I appreciate your response.

    Hi,
    I would suggest that when you test the default web auth page as a user on the "guest" network (or even use the preview page but the code may be slightly different, you should be able to view the source code from within your browser (e.g. within Firefox use Ctrl-U). You can then use this as a basis for creating your own page.
    In terms of HTML tools there are many available, but I use MS-Word 2003 and when necessary the script editor within MS-Word 2003. Once you are happy with your page save in the appropriate format. You can create a page as you want to see it and then convert it to HTML, and then remembering to embed the required "username" and "password" fields and the submit button.
    HTH

  • Web Auth Page stoped working

    I'm using 4404 controllers and 1131 access points. Im on version 6.0.188.0
    My Web Auth Page stoped working. I switched our webauth page back to the built in one to test weather or not it was my custome webauth was giving me the problem. It still didn't work. I switched an AP over to my second controller and used the built in webauth and it worked.
    I tired restarting my first 4404 controller help.
    I doubt it but maybe it has something to do with another problem i posted about. https://supportforums.cisco.com/message/3042441#3042441
    does anyone have any ideas on what to do?

    I might have found a clue. I went under the security tab and clicked LDAP. I notice that server state was set to disable on controller 1. I looked at controller 2 and it was enable.
    I made controller 1 enabled then pressed apply. I tried to login again and it didn't work. I went back and hit the apply button again and a message box poped up. It said "failed to set retransmit Timeout."
    after I clicked ok (the only option) it set server state was disabled again.

  • Web Auth Pages

    Can you have separate web auth pages for each SSID?
    Sent from Cisco Technical Support iPhone App

    Hi,
    If  you are running WLC software 4.2 and above then u can do this on per  WLAN basis.. here is the link which tells on how to do it..
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtml#A1
    Lemme know if this answered ur question and please dont forget to rate the usefull posts!!
    Regards
    Surendra

  • Cisco Web Auth Page

    We have url-directed login page for web authentication.
    Why does the Cisco page flashed, in a bit of a sec, before it goes ahead to the directed url.
    Unfortunately, some customers are not happy with this.
    Can that Cisco page be totally eliminated?

    no... the client doesn't get the full-blown cisco web-auth page. just at the Title bar of the Window, the Cisco Title bar appears very swiftly and directed right away to the supposed external web authentication page.
    the code used and tested with were 4.1.171, 4.2.185, 5.2.157. and the behavior is the same for all code. it will flash that Cisco title bar and then directed right away to the external web authentication page.
    nope, we're not trying to do something special. just the customer noticed it and somehow is not happy with it.
    what could be the best acceptable explanation we can provide our customer for this very small yet customer-annoying instance. is there a Cisco document that we can show the customer regarding this behavior?
    Thanks!

  • Web Auth Page

    Does anyone have a good resource to create custom web auth pages?  I've modified the bundles from Cisco's website, but I am a terrible web designer.  Just curious if anyone knows of a program to make these modifications easy for someone who doesn't have this skill set.

    I use Microsoft Expressions, but I don't know if you call that drag and drop,  You have a split window so you can see the code along with the browser.  This way you can actually type on the browser preview and it will generate the code and vice versa.  Here are some others, but might not be free:
    http://www.ultraedit.com/support/tutorials_power_tips/ultraedit/integrated_html_preview.html
    http://www.coffeecup.com/html-editor/
    http://liveditor.com/index.php
    Thanks,
    Scott
    *****Help out other by using the rating system and marking answered questions as "Answered"*****

  • Am using Safari 4.1.3 with system 10.4.11 and can only come up with advances preference page when calling up security - thus cannot see cookies. I have Safari 5.0.6 on my MacBook. Will it run on my older machine? Can I transfer older bookmarks?

    Am using Safari 4.1.3 with system 10.4.11 and can only come up with advances preference page when calling up security - thus cannot see cookies. I have Safari 5.0.6 on my MacBook. Will it run on my older machine? Can I transfer older bookmarks to the new software?
    Machine Serial Number:          W8*********AR
    <Personal Information Edited by Host>

    Safari preferences has no...

  • You can download past purchases on this computer with just one Apple ID every 90 days

    I have a mac which my fiancee and I share. There are 2 separate accounts and 2 separate apple ids used to buy different music (i.e. we have 2 separate iphones and music collections).
    I received the following error (see uploaded image) which states that, "you can download past purchases on this computer with just one Apple ID every 90 days".
    Now, when I sync my iTunes and iPhone only some music that I have previously purchases is affected. For some reason they failed to sync with my iPhone and become unavailable in my iTunes ("file cannot be found"). When I deleted the record I saw that it became available for download in iTunes and then discovered this issue.
    I have legally purchased the music and just want to be able to sync the files legitimately. It just seems very restrictive to say that you have to have 2 different machines for every account (i.e. you cannot have multiple users on a device with their own accounts which each have their own Apple IDs).
    Mikhail

    Hi
    No - that is the issue - both my husband and I use the same computer and want to be able to use our individual Apple IDs so can access our download content e.g. I-books that we have purchased through our other MAC devices such as I-Pad.  In the past, we had four people using one computer with no problem regarding Apple ID.   In the newer operating system, we are now restricted to one at a time - it means one of us is blocked out from accessing our content for a period of 90 days.   Have you any suggestions on how we can both use our individual Apple IDs with the same lap-top?  We have set up discrete accounts so we log on to the computer individually.  Many thanks for any help.

  • You can use iTunes Match on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 5 days.

    I only have 1 Apple ID.  I turned off iTunes Match on my iMac, and now I cannot turn it back on.  I get this error when I try to just turn iTunes Match back on, on the same computer, with the same Apple ID that I used orginially to subscribe to iTunes Match:
    This computer is already associated with an Apple ID.
    You can use iTunes Match on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 5 days.
    I checked for iTunes updates.  None are available since I am using the latest.
    I stopped/started iTunes.  I rebooted the iMac.
    NOTHING HELPS!!!!!!!!
    I have a Mac Mini and I use the same Apple ID on iTunes there.  I was able to turn iTunes Match off and back on with no trouble at all but my iMac refuses to allow me to turn on iTunes Match.
    Now what do I do?

    Unless you really only have one AppleID that you use with the iTunes Store there's really nothing you can do. In the case of having only one AppleID you should contact iTunes Store support, since that would be a server-side problem.

  • Automatic Downloads and Strange Error Message: "You can auto-download purchases on this computer with just one Apple ID every 90 days"

    Hi gang-
    Yesterday I noticed that iTunes on my iMac had not auto-downloaded several new songs that I had recently purchased on my iPhone.    In iTunes Preferences, under Store -> Automatic Downloads, I always have Music selected so all songs purchased from any device using my Apple ID normally download automatically.
    To troubleshoot this, I double-checked my Preferences and sure enough, Music was de-selected under Automatic Downloads.   I then Selected it and clicked OK.   Here's where it gets weird and I get this error message:
    This computer is already associated with an Apple ID.  You can auto-download purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 84 days.
    I read and re-read this message and none of it seems to apply to me.   I have only one Apple ID.   I am currently logged in with iTunes to that one Apple ID.   All my iTunes Music ever has been purchased with that one Apple ID.   I am not trying to associate this computer or any other with a different Apple ID.
    I logged iTunes out and then back in again and tried all the above- but same error message.
    So, as it is now, I am unable to turn on Automatic Downloads in iTunes.   
    Anyone know what the heck is going on?
    Thanks!
    Dave

    Hey gang-
    Okay, this gets more and more bizarre.   I sent a support email to Apple and basically they said  "...it seems that someone else associated your Mac with their Apple ID. That's the reason your purchases won't download."
    Yikes!   My wife and I live alone- and we have exactly one and only one Apple ID.    Would somebody have needed physical access to my iMac to do that?
    Support then said "You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer."
    Okay- so I logged into My Account in iTunes.   On the list of associated devices, my own iMac is NOT on that list.   But I am logged in under the same Apple ID I've had for years on that iMac.
    So my big question right now is...if my iMac (that I've owned for 5 years) has somehow been dis-associated from my Apple ID, how do I find out what Apple ID it is associated with?
    Thanks gang for trying to help me unravel a mystery.
    Dave
    PS- Here's an Apple Tech article on iTunes associations, but it doesn't really go beyond what we've discussed above:
    http://support.apple.com/kb/HT4627

  • HT204370 Way around this message? "You can download past purchases on this computer with just one Apple ID every 90 days"

    I bought a Christmas video on my Apple TV in my bedroom for my kids to watch. I tried to download it to our computer in the living room, but I got a terribly inconvenient message that says I have to wait 30 days before downloading it, because my husband downloaded something with his account-REALLY?!
    Is there a way around this?
    30 days from now, my kids won't be as interested in The Grinch who stole Christmas.
    Is the only way around this to buy it twice? Or buy through Amazon Instant Play?
    There has to be a way around this- it seems so silly- why would I buy another video through Itunes, if it's better to buy on a disc, so that I can watch it in multiple rooms?
    Message reads exactly "You can download past purchases on this computer with just one Apple ID every 90 days. This computer can be used with a different Apple ID in 30 days."
    Please tell me I am doing something wrong, and that it is possible for my kids to watch the video I purchsed in our bedroom and also in the living room if they prefer. Thanks!

    You can try contacting itunes store support to have it reset. It's not gauranteed though because account association through computers and devices can only be switched every 90 days.

Maybe you are looking for