WLC 5508 - Issue- Will not start NCS

After a powerloss and reboot the unit will not start NCS. The running configuration file apears to be intact. Any suggestions would be apreciated. Currently generation failure logs.
Thanks in advance
John D.

Hi John:
Power cycling a 5508 wireless LAN controller shouldn't have any impact on NCS. The best source of accurate information will be the logs.zip file that would come from running the command
backup-logs 06282013 repository
That's going to cause all the logs for NCS to be backed and zipped up, and the copy put over on the repository. Once you have that, you can unzip it, and the place to start would be the hm-0-0.log file. That's the log of the Health Monitor service that watches over everything and tells the other services like the database, FTP/TFTP servers and such to kick off, and logs what those services do when told to kick off. Based on which service isn't behaving, you'd check the log for that service for more details of why that service isn't behaving.

Similar Messages

Macbook Pro Leopard Install Issues - Will not start

Ok, so I bought a used Macbook Pro about 9 months ago. As soon as Leopard came out, I upgraded. It ran flawlessly until about 2 months ago. I kept getting random freezes, "ATSServer" errors, and a bunch of other random problems. I decided a fresh install was definitely the way to go.
So I backed all my stuff up and erased the drive (no zero out). Naturally, I installed Leopard on a OS X Extended Journal format. When the installation was finished and the computer restarted, it sat at the boot screen (the grey Apple logo with the spinning thing underneath it). Instead of booting, it just restarted and did the same thing again. It continued to do this and was clearly not going to boot into Leopard.
I tried installing again under the same format (OS X Extended Journaled). It did the same thing.
So I tried to install Leopard on a OS X Extended Journaled Case-Sensitive partition. It installed, and what do you know? The computer booted up fine. I updated everything with System Update and everything worked flawlessly. But then I tried to install Adobe Creative Suite and realized that it (along with other programs I need for work) CANNOT be installed on a case-sensitive drive...
So I erased again and tried installing on a Journaled drive (non-case sensitive)... it did the same thing as before. Kept restarting at the boot screen and continued this in a never ended cycle.. would not boot.
So I tried a Mac OS X Extended partition (non-journal and non-case sensitive). Leopard installed and this time it got past the boot screen. Went to a blue screen... then got hung up on a blank grey screen!
So basically:
OS X Extended Journaled: Restarts continually and will not get past boot screen.
OS X Extended Journaled Case-Sensitive: Works perfectly! But cannot install my most necessary Applications on this format.
OS X Extended: Gets past boot screen but stuck at a grey screen right before OS X actually boots.
As I said, I haven't tried installing on a zeroed out drive yet (it is zeroing out the drive right now), but do you think this could even have anything to do with the problems I'm having?
It just doesn't make any sense to me... Why the **** would it work on case sensitive, but nothing else? Hard drive problem? I thought it was the logic board, but it ran absolutely PERFECTLY when on a case sensitive format.
It is out of warranty, and even if I did have AppleCare, I NEED this computer for work. I CANNOT afford to send this in anywhere to get repaired.. and I really cannot see it being a hardware issue because like I said, it works PERFECTLY on a case sensitive partition, but will not boot on a Journaled or plain Extended partition.
I'm crossing my fingers that zeroing it out will work, but ***?
Thanks.

Did you get the disks the machine shipped with? If not, call 800-MY-APPLE and order replacement disks. Should be available for a nominal S&H charge. If so, boot with the one containing the Apple Hardware Test suite and run the extended tests. If it passes, download Rember and run its tests. If the machine passes, then you've probably ruled out any hardware issues. After the disk is zeroed out, try installing, only selecting the Mac OS Extended format and ensure that you choose the GUID partition map scheme. Journaling can be turned on and off with Disk Utility, so you don't need it for preparing the HD. BTW, the Erase & Install will automatically erase the HD (just deletes the directory) and turn on journaling.

IPod mini issues: Will not start, Unrecognized by CPU

Hey guys, I just wanted to know if anyone else has a fix for this problem: My Mini's worked fine for a little under a year now, and it's giving me a bit of a problem now. First off, it jumps to the folder/exclamation icon, and I've tried all the conventional methods for rebooting it, resets don't work, it won't go to disk mode, and my computer won't detect it.
If anyone has a fix for this, mind letting me know?

Have you seen all these?:
iPod Folder with Exclamation Point After Disconnected From Computer
iPod Folder with Exclamation Point After Turned On
Good Thread About iPod Sad icon/Folder with Exclamation Point
I hope this helps!

TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.

You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line

HT4623 My Iphone will not start. There was an error in updating. Is anyone else having this issue

My Iphone will not start. There was an error in updating. Is anyone else having this issue

After connecting to iTunes, I noticed that "Back up to iCloud" was selected (in the middle of the screen on the "Summary" tab, under "Backup"), and "Last backed up to iCloud" reflected the time that I attempted to back up from my phone. Even now, the phone still says "Last Backup: Never," so there is clearly a disconnect. Hopefully Apple will fix this soon.

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Settings (and other Apps) Will Not Start (Metro)

This morning most Modern Apps will not start on my system, including the Settings app. It seems to be a DCOM failure and seems directly related to this old thread.
http://social.msdn.microsoft.com/Forums/en-US/7e6fe520-af09-4a38-b333-30ed5978f70c/control-panel-will-not-start-metro?forum=windowsdeveloperpreviewgeneral
This is a current Windows 8.1 installation, full up to date on patches, and the problem still occurs after rebooting. I checked for newly installed patches, etc. and the only thing recent was the Windows Defender definitions update.
It's an i7 with 32 GB of RAM, fast SSD's etc. I don't believe this is a hardware problem in any way.
Here's the details from the System event log:
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          19-Jun-2014 09:21:53
Event ID:      10001
Task Category: None
Level:         Error
Keywords:      Classic
User:          SARSYS9\Michael Sargent
Computer:      SarSys9
Description:
Unable to start a DCOM Server: microsoft.windows.immersivecontrolpanel as Unavailable/Unavailable. The error:
"15612"
Happened while starting this command:
"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
    <EventID Qualifiers="0">10001</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-19T13:21:53.648625200Z" />
    <EventRecordID>546613</EventRecordID>
    <Correlation />
    <Execution ProcessID="972" ThreadID="4068" />
    <Channel>System</Channel>
    <Computer>SarSys9</Computer>
    <Security UserID="S-1-5-21-802678348-186571299-231467638-1001" />
</System>
<EventData>
    <Data Name="param1">"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel</Data>
    <Data Name="param2">15612</Data>
    <Data Name="param3">microsoft.windows.immersivecontrolpanel</Data>
    <Data Name="param4">Unavailable</Data>
    <Data Name="param5">Unavailable</Data>
</EventData>
</Event>
That matches almost exactly with the referenced thread. But that thread never seemed to give a set of steps to resolve the issue (other than doing a Refresh which would be a catastrophic waste of time, reinstalling my whole development environment).
I really would appreciate some help resolving this issue. If I'm in the wrong forum, please move or suggest a more appropriate place.
Thanks,
    Mike

Please post questions and problems about using Windows in the Windows forums on
http://answers.microsoft.com
The MSDN Windows Store apps forums are for developers to discuss writing their own Windows Store apps.
--Rob

HP TouchSmart application will not start

We purchased an HP IQ 526 TouchSmart desktop with Windows Vista Home Premium 64-bit machine approximately two months ago. We use Clearwire to connect to the internet. About a month ago the HP TouchSmart applilcation stopped working. It will not start. Every time we try to start it we get the following error message:
HP TouchSmart Calendar has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Sometimes it says it's the HP TouchSmart Notes has stopped working or one of the other TouchSmart applications. I went to hp.com and updated all of the software for the TouchSmart application and Windows Vista. And I reguarly use Windows Update to ensure my OS is current with Microsoft security updates. I also updated the firmware. After these actions and rebooting many times the application would still not start. At this point I contacted HP customer support. We uninstalled HP TouchSmart, then reinstalled. This didn't work. I continue to see information events in the Windows Application Log almost every minute regarding HPTouchSmartCalendarNotes. They are typically the following messages over and over:
Reminder clock elapsed event is successfully fired.
CheckReminder() is executed successfully.
ShowReminder() is executed successfully.
After Fetching the XML nodes, checking for each node is done successfully in ShowReminder()
Events in Events.xml Before Showing Reminder<DataRoot></DataRoot>
I still have a case open with HP support and they said uinstalling the OS and reinstalling is likely the next step but I have to believe someone else has run into this issue or HP has a QFE for this issue. I really do not want to uninstall the OS and reinstall it. This has become very frustrating as the HP TouchSmart application is the primary reason we purchased the computer so my wife can manage our photos and music collection via the touch screen.
If anyone has seen this before or has a solution I would love to hear about it. We are considering taking the computer back if we can not resolve this issue.
On a related note and this might be a separate issue I continuously get HPTCS stopped working messages. I've searched the internet for what HPTCS.exe is and what is does but there is little to no information available.
Please let me know or if there is additional information I could provide that would be useful for troubleshooting.
Cheers,
G

Our machine was sent back to HP and they reformatted our hard drive and sent it back. Wow. Fantastic service. NOT!!!! I could have done that. Without debugging their own software to figure out why this was happening they reformatted the hard drive. I can only expect this problem will happen again since there must be a software update, etc... that is causing this behavior. I honestly do not know how to voice my disgust in their customer service. I have been a long time fan of HP and we basically only buy HP at work but this was the poorest display of customer service I have ever encountered. If your TouchSmart application stops working and the TouchSmart software updates do not resolve the problem you might as well pretend like you bought a normal computer without touch capabilities. Like buying an iPhone without it behaving like an iPhone.

I attempted to load Itunes update and it will not start and faults out

I attempted to load an update to I Tunes and it has now faluted out and will not start and it gives me an error message

Hey lljmustang,
Thanks for the question. I understand you are experiencing issues with iTunes for Windows. Let’s troubleshoot the iTunes installation by completely removing and reinstalling iTunes and all related components (it is important to remove all components in the order listed).
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Additional Information:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.

Trying to start itunes - message appears "APSDAEMON.EXE MSVCR80.DLL is missing. Then another box indicates "Error 7 (Windows error 126). Itunes will not start. Can someone tell me what the problem is and how to fix?

when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing". Then another box indicates "Error 7 (Windows error 126)". Itunes will not start. Can someone tell me what the problem is and how to fix?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

T500 shuts down/or freezes when I plug in my AC adapter and now will not start up.

I have had my T500 for two years and I have had endless problems with this laptop. My latest issue started with the computer waking up from sleep mode with a black screen. The computer just froze there and I had to force it to shutdown. When I finally managed to get it started again, the computer gave me an alert saying that a display driver had stopped working. The computer ran fine for a while before it would issue the blue screen of death then have the same black screen issue again and shutdown. Then it got to the point where if I have my computer plugged in it would not even get to the BIOS screen, it would simply loop-restart over and over till I unplugged it, pulled out the battery, put the battery back and turned it on again. Then it would not start at all if I had my adapter plugged in and if I plugged it in at all while the computer was running, it would freeze and after a minute would shut down and again continuously try to start up. Now, the computer will not start in any way, plugged in or no. The lights all turn on like it normally does when it starts up, but then it shuts off and repeats the same process over and over again.
I have no idea what to do this time and unfortunately being a student I do not have enough money to buy an external harddrive to back up everything on this computer. Frankly with all the problems I have had with this thing, I am considering just throwing it out.

Try making a bootable Ubuntu disc and running that for a while. It's possible your Windows install is hosed.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Sql server will not start - Database 'model' cannot be opened. It is in the middle of a restore.

Sql server service will not start after server reboot:
2009-08-13 14:15:43.94 spid7s      SQL Trace ID 1 was started by login "sa".
2009-08-13 14:15:43.97 spid7s      Starting up database 'mssqlsystemresource'.
2009-08-13 14:15:43.97 spid7s      The resource database build version is 10.00.1600. This is an informational message only. No user action is required.
2009-08-13 14:15:44.30 Server      A self-generated certificate was successfully loaded for encryption.
2009-08-13 14:15:44.30 spid7s      Server name is 'WIN-37R9WFWAJIB\MSDB1'. This is an informational message only. No user action is required.
2009-08-13 14:15:44.32 spid10s     Starting up database 'model'.
2009-08-13 14:15:44.32 Server      Server is listening on [ 'any' <ipv6> 49167].
2009-08-13 14:15:44.33 Server      Server is listening on [ 'any' <ipv4> 49167].
2009-08-13 14:15:44.33 Server      Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSDB1 ].
2009-08-13 14:15:44.33 Server      Server named pipe provider is ready to accept connection on [ \\.\pipe\sql\query ].
2009-08-13 14:15:44.35 spid10s     The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2009-08-13 14:15:44.38 Server      Server is listening on [ ::1 <ipv6> 49168].
2009-08-13 14:15:44.38 Server      Server is listening on [ 127.0.0.1 <ipv4> 49168].
2009-08-13 14:15:44.38 Server      Dedicated admin connection support was established for listening locally on port 49168.
2009-08-13 14:15:44.39 spid10s     Error: 927, Severity: 14, State: 2.
2009-08-13 14:15:44.39 spid10s     Database 'model' cannot be opened. It is in the middle of a restore.
2009-08-13 14:15:44.49 spid10s     Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized.
2009-08-13 14:15:44.50 spid10s     SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informa
there is plenty of room on the server, so i dont think its a disk space issue. i am able to start the service as such:
C:\Users\Administrator>net start MSSQL$MSDB1 /c /m /T3608
The SQL Server (MSDB1) service is starting.
The SQL Server (MSDB1) service was started successfully
sqlcmd -e
1> select name, status from sysdatabases;
2> go
select name, status from sysdatabases;
name
                                                 status
master
                                                       65544
tempdb
                                                       65544
model
                                                       65568
msdb
                                                  1073807368
SS_DBA_Dashboard
                                                  1073807368
(5 rows affected)
model is in RESTORING state and I dont know how to fix it. I am running simple backups, so I have a somewhat recent backup of model.bak but when I attempt to restore it I get an error:
1> restore database model
2> go
restore database model
Msg 3112, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 1
Cannot restore any database other than master when the server is in single user
mode.
Msg 3013, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 1
RESTORE DATABASE is terminating abnormally.
other forums suggest manually updating the status column but i dont know if my syntax is wrong or it just cant be done in sql server 2008:
1> begin transaction
2> update sysdatabases set status=16 where name='model'
3> ;
4> go
begin transaction
update sysdatabases set status=16 where name='model'
Msg 4406, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 2
Update or insert of view or function 'sysdatabases' failed because it contains a
derived or constant field.
1>
yet another forum suggested taking a cleanly shut down model.mdf and model.ldf from another sql server 2008 instance and placing those in the data directory while moving the 'restoring' ones to a backup location. this didnt work either. any help is appreciated im new to sql server and this is very frustrating! thanks in advance!

I have the same issue on SQL Server 2008R2, after a server reboot, but none of the NET START commands or command line attempts are successful to start the Service.
NET START command results in "Access Denied" "System Error 5" and the Command line attempts result in
Server      Error: 17058, Severity: 16, State: 1.
Server      initerrlog: Could not open error log file ''.
Any help?
SQL Error log file:
2011-03-29 16:50:49.40 Server      (c) Microsoft Corporation.
2011-03-29 16:50:49.40 Server      All rights reserved.
2011-03-29 16:50:49.40 Server      Server process ID is 7292.
2011-03-29 16:50:49.40 Server      System Manufacturer: 'Dell Inc.', System Model: 'PowerEdge T710'.
2011-03-29 16:50:49.40 Server      Authentication mode is MIXED.
2011-03-29 16:50:49.40 Server      Logging SQL Server messages in file 'E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2011-03-29 16:50:49.40 Server      This instance of SQL Server last reported using a process ID of 7448 at 3/29/2011 4:30:06 PM (local) 3/29/2011 8:30:06 PM (UTC). This is an informational message only; no user action is required.
2011-03-29 16:50:49.40 Server      Registry startup parameters:
-d E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
-e E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
-T 4616
2011-03-29 16:50:49.42 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2011-03-29 16:50:49.42 Server      Detected 24 CPUs. This is an informational message; no user action is required.
2011-03-29 16:50:49.84 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2011-03-29 16:50:49.84 Server      Lock partitioning is enabled. This is an informational message only. No user action is required.
2011-03-29 16:50:49.86 Server      Node configuration: node 0: CPU mask: 0x0000000000fff000:0 Active CPU mask: 0x0000000000fff000:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2011-03-29 16:50:49.86 Server      Node configuration: node 1: CPU mask: 0x0000000000000fff:0 Active CPU mask: 0x0000000000000fff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2011-03-29 16:50:49.89 spid9s      Starting up database 'master'.
2011-03-29 16:50:49.95 spid9s      CHECKDB for database 'master' finished without errors on 2011-03-18 08:46:34.257 (local time). This is an informational message only; no user action is required.
2011-03-29 16:50:49.95 spid9s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2011-03-29 16:50:49.97 spid9s      SQL Trace ID 1 was started by login "sa".
2011-03-29 16:50:49.97 spid9s      Starting up database 'mssqlsystemresource'.
2011-03-29 16:50:49.99 spid9s      The resource database build version is 10.50.1600. This is an informational message only. No user action is required.
2011-03-29 16:50:50.20 spid13s     Starting up database 'model'.
2011-03-29 16:50:50.20 spid9s      Server name is 'XXXX'. This is an informational message only. No user action is required.
2011-03-29 16:50:50.21 Server      The certificate [Cert Hash(sha1) "C41DC20703F049763778AC2842C3C8A3A2C6EED4"] was successfully loaded for encryption.
2011-03-29 16:50:50.21 Server      Server is listening on [ 'any' <ipv6> 1433].
2011-03-29 16:50:50.21 Server      Server is listening on [ 'any' <ipv4> 1433].
2011-03-29 16:50:50.21 Server      Server local connection provider is ready to accept connection on [
\\.\pipe\SQLLocal\MSSQLSERVER ].
2011-03-29 16:50:50.21 Server      Server named pipe provider is ready to accept connection on [
\\.\pipe\sql\query ].
2011-03-29 16:50:50.21 Server      Server is listening on [ ::1 <ipv6> 1434].
2011-03-29 16:50:50.21 spid13s     The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2011-03-29 16:50:50.21 Server      Server is listening on [ 127.0.0.1 <ipv4> 1434].
2011-03-29 16:50:50.21 spid13s     Error: 927, Severity: 14, State: 2.
2011-03-29 16:50:50.21 spid13s     Database 'model' cannot be opened. It is in the middle of a restore.
2011-03-29 16:50:50.21 Server      Dedicated admin connection support was established for listening locally on port 1434.
2011-03-29 16:50:50.22 spid13s     Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in
the event log that may indicate why the tempdb files could not be initialized.
2011-03-29 16:50:50.22 spid13s     SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.

Mac OS 10.5 / I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!! I do have the OS dvd that i purchased years ago... But my computer will not start from it on its own. My

Mac OS 10.5 /
I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
I do have the OS 10.5 dvd that i purchased years ago...
But my computer will not start from it on its own.
My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info? I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
Once again there is not a copy of this file or its contents in the recycle bin...
Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
Lol It was a bad choice to delete this file ...
Thanks guys

Okay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
Anyway here we go...
Okay so first things first.... Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
-------If you dont want to read through the whole story the fix is summed up in the bottom section-------
Okay so now the SOLUTION!!!!
By trial and error , and pure boredom I opened up my computer to clean the inside...
AND
"Disconnected the primary HD"
and just because ....... REBOOTED my computer. Just to see what it would do.
Upon restart and though it looked like it would repeat its usual cycle...
About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
After a bit of trial and error...
I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
this setting is under
Utilities / startup disk
After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
So upon this discovery
I went to the Disk Utility located under Utilities
Highlighted my primary HD located in the left hand column
Once highlighted ...
In the heading section on the right I selected the option
Erase
in which I erased My current OS on my primary HD ...
I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
I FORGOT to add something...
Another reason why I deleted my primary HD!!!!!
I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
So back to the next step...
I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
But ofcourse it had no name because it we previously erased it.
So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
Which said it would take about 57 minutes ... But I believe was alot less...
My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
It was like I was setting up for the first time ;) asking for my registration info...
The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!!
Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
-------One more time the fix------
*Insert your OS dvd into your dvd rom drive.
*Unplug your primary HD or corrupted startup disk
*Reboot your machine...
Upon restart your primary HD will not be recognized...
* you will then be prompted to select your language.
Once selected
*Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
* Click restart...
!!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
If you do not replug your HD before the chime it will not be recognized.
In that case restart again.
Upon restart once again
*Choose your language...
*Click Utilities / disk utility
In the left column select and
*Highlight your HD ...
Then towards the top portion / center of the page
*Click the heading Erase
Then on the page toward the bottom
*Click security options
This will then provide erase options.
I USED THE FIRST OPTION
"Dont erase data"...
*click OK
* click erase...
Once erased which should take a few seconds
*Cancel the disk utility...
* Click Utilities / startup
And your newly erased HD should now appear in the list.
* Select your drive from the list by highlighting
It should no longer have a name.
*Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
Thats it!!!!
Once everything reinstalls re-add your personal info or registration info and you are up and running.
Goodluck ;)

I am going "Insane" - On windows 7 64 bit Itunes just stopped starting, it tries but gives up after a few mins - I have tried every reinstall-restart-that I can find in any forum, it still will not start up HELP

I am going "Insane" - On windows 7 64 bit Itunes just stopped starting, it tries but gives up after a few mins - I have tried every reinstall-restart-that I can find in any forum, it still will not start up HELP

Hi, ATPMolloy.
I certainly understand your frustration and will do my best to help. I see you have uninstalled and reinstalled iTunes with no change in results. I have attached an article below that specifically troubleshoots this issue that you are experiencing.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Regards,
Jason H.

HT1455 What if my computer will not start up in safe mode? What next?

What is the remedy for a MacBook that will not start up in safe mode? The gray apple icon and progress wheel appear, I let go the shift key and the whole thing shuts off again. Please help. Thank you.

My understanding is that the Apple logo is produced by the disk and the spinning wheel shows that the software boot process has started.
1 - Shut down your Mac
2 - Press the power button to start and
3 - Immediately press and hold the Command (Apple) key and the S key
4 - At the prompt type the following and then hit return:
/sbin/fsck -fy
fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issues were found:
** The volume (name_of_volume) appears to be OK
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED *****
Important: If this message appears, repeat the fsck command you typed in step 4 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do). When fsck reports that your volume is OK, type the following at the prompt and hit return:
reboot
Your computer should start up normally and allow you to log in.
Good luck.

WLC 5508 - Issue- Will not start NCS

Similar Messages

Maybe you are looking for