WLC 7.2 - Custom WebAuth using waep Template w/ HTTP Only

We are trying to get the waep template (default no changes) from the Cisco WebAuth bundle to work on a 5508 controller.
We've setup the controller to use the custom login.tar that comes with the waep template folder in the bundle.
We setup the WLAN to work off the global template and we used the config network web-auth secureweb disable command to allow only http rather than https (which is supposed to work in 7.2 code)
When we test with the custom bundle, we get no answer from the controller, just a url of
http://1.1.1.1/fs/customwebauth/login.html?switch_url=http://1.1.1.1/login.html&ap_mac=c3:12:30:01:a4:d0&client_mac=01:21:ca:b3:13:12&wlan=Guest&redirect=www.google.com/
If we turn custom off, and use internal everything works...
Just to be clear.. we aren't looking for authentication (user and pass) we are trying to do the enter your email and click accept to the aup method.
Thanks for any help!

No changes to the tar file that comes as part of the bundle..
Downloaded the bundle, unziped all folders locally.. then uploaded the login.tar from the waep folder right to the controller.
Changed webauth to use custom, and applied.
Tested multliple times with the same results.

Similar Messages

Template Designer - Using Word templates in CRM 5.2

Hi, I am trying to understand how to go about setting upp a crm 5.2 system for using word templates. I have trouble finding information about it. Does anyone have any link suggestions or knowledge about it which You can share?
Thanks!
Best regards Eva
Edited by: Eva Hamberg on Jan 11, 2010 11:46 AM

Hello,
First of all I would recommend to implement all OSS notes for your CRM version. Search for application area "CRM-BF-COM". Example:
Note 1068364 - Office Integration fixes CRM 5.2
Then kindly check the online help for more information on how to use the template designer:
http://help.sap.com/saphelp_crm60/helpdata/en/f8/ba29b001be455d89764cf29c6a19fb/frameset.htm
Kind regards,
Nicolas Busson.

Custom WebAuth WLC 5760

I want to setup a custom webauth for my WLC 5760. I already downloaded the webauth bundle and put it in WLC via Command Download in WLC GUI. According to Guide, after the download completed, the custom page will appear in custom page dropdown for web parameter map.
But in my case it shows nothing. So where did I miss ?
Thank You

Hi
Pls refer this document
http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan-controllers/117728-configure-wlc-00.html
HTH
Rasika
**** Pls rate all useful responses ****

Custom Report using pre-defined template

In 2012, How to create custom report using pre-defined reports template in below format?
Column1 :- Device Name
Column2 :- When installed (Date & Time)
Column3 :- Success (Date & Time)
Column3 :- Failed (Date & Time - With which error code)
Column4 :- Not Installed
Regards,
Onkar.

Here is what you need to do.
Start by writing the SQL query that you want.
Clone one of the existing report
Replace the SQL query with the new query.
Update the columns with what you need.
http://www.enhansoft.com/

WLC 7.2 code and Custom WebAuth

Is there a way to associate a Custom Downloaded page to 1 and only 1 AP/guest account, leaving the rest using the default?
It appears to be a global condition.
the folks at the Law Library have/want their own verbage for their guests and receive the usual daily guest key.. I want the default page for all the other 'guest accounts' on the controller.
currently the LawLib AP resides on a WiSM while all the rest of the production devices are on 5508's, and I want to kill the WiSM.
David

To explain it better, you only can define a certain WebAuth page per SSID and that is why having a separate SSID for the library is a better way of doing things. This allows guest users to know what SSID they should connect to and separates in a way the normal guest from the library guest. It doesn't mean that the guest or library guest won't connect to the other SSID but at least you have the correct verbiage on each custom WebAuth HTML page.
Sent from Cisco Technical Support iPhone App

Is there a way to backup the Custom WebAuth from the WLC?

is there any way to get the tar file (or all of the individual files) of the custom webauth pages from the WLC as we have lost our backup (dont ask, even I'm not sure how that happened)

Yes simply connect to the guest SSID and save the pages, that will capture the script, jpg and html file, choose save as webpage complete

Need my custom webauth page displayed with HTTP instead of HTTPS

I have a custom webauth page installed that I am using with web passthrough authentication on my WLC2006 in order to put up a acceptable use policy page.
The WLC uses HTTPS to display this which causes a security certificate warning to appear if I go with the WLC's own self-signed certificate. Is there a way I can get the WLC to use plain HTTP to display this page instead so I can eliminate the warning?
I have already tried installing a trusted 3rd party certificate on the WLC, but I have this very strange problem where mucking with the WLC's web authentication certificate in any manner causes all network activity on the WLC to break except for CDP and ARP, essentially leaving the WLC dead. Three weeks of troubleshooting with Cisco TAC has yielded no progress on that front so now I am trying to bypass the need for a security certificate altogether since I really don't need to encrypt my acceptable use policy page.

The documentation doesn't provide very clear direction, does it?
To download the WLC's default webauth page, browse to the controller's Security > Web Login Page. Make sure the web authentication type is Internal (Default). Hit the Preview button. Then use your browser's File > Save As... menu item to save the HTML into a file. Edit this to your liking and bundle it and any graphics images up into a TAR archive, then upload via the controller's COMMAND page.

Custom webauth settings in between Anchor & Foreign

Hi techies,
We have implemented a new wireless mobility guest SSID in between the anchor and multiple foreign controllers.
We are using a custom webauth page, written by the customer, which was working great.
Since we've upgraded to 7.2.115.2, we receive a couple of complaints from users saying that they receive the default Cisco web auth login page, instead of the custom. But, after they successfully logged on, they see the successfull page of the custom webauth package? Which seems quite strange. It seems like the webauth pages from the default Cisco one and our custom are getting mixed during the authentication process.
I have read in the mobility design guide about which settings should be absolutely identical in between the anchor & foreign controller(s).
So I've checked them and I see a difference in the web auth settings, under the security tab in the WLC, which tells the controller if it must use the default internal page, or a custom one. We've uploaded the custom web-auth package only to the anchor controller. The foreign controller have this option set to "Internal (default)".
Do we need to upload the same custom webauth .tar package to all of the foreign controllers to mitigate this?
It seems I can't find it in any ofthe cisco docs available..
Thanks!
Dion Dohmen

I think there was an issue with what you are seen with versions of 7.2. The webauth should be in the anchor WLC no matter what. You can search the forums as others have ran into that issue also.
Sent from Cisco Technical Support iPhone App

Viewing/uploading customized WebAuth pages

Howdy,
I've got a 5508 running 7.6.100 acting as an anchor in a remote location. It is using customized WebAuth pages but I'm needing to verify the actual html content of those pages as they are in use today. Downloading a new WebAuth bundle is easy, and I know I can preview the WebAuth login page, and I've got the pages that 'should' have been downloaded to the controller- I need to see what's there now. Alas, because of my location, I can't simply toss a client on the WLAN to examine the pages either.
Before having to overwrite the existing pages, does anyone have a way to upload or view customized pages on the WLC?

AHA! CLI and Google-fu remain my best friends.
Although the GUI in this version does not allow UPloading WebAuth bundles from the WLC, you can do it from the CLI, you just need the commands....
Fire up your TFTP server (you could use FTP), and set the transfer commands using CLI on the WLC
TRANSFER UPLOAD MODE tftp
TRANSFER UPLOAD DATATYPE WEBAUTHBUNDLE
TRANSFER UPLOAD SERVERIP tftp-server-address
TRANSFER UPLOAD FILENAME destination-filename
TRANSFER UPLOAD START
Check your settings and click 'y' to start
Viola, a copy of the current WebAuth bundle! Unzip the bundle and you can see the current web pages used.

Custom WebAuth Issues "Error Code 1"

Hi All,
Being experimenting in the Custom Webauth uploads. The main problem I have is my company does not want to issue a username/password to each vistor so we just have a static credentials that change weekly. In the custom webauth this mean error code 1 is issued by the controller "the user is already logged in" Go Figure! All browsers apart from IE ignore this and redirect as normal. IE being the pain it is displays the message but does not redirect. This means the user goes into a constant login loop trying over and over again. But in fact they have already authenitcate and all they need do is browse away from the login.
Does anyone know how I can ignore error code 1 all together. Its funny the built in page doesn't even care about this and when I captured that and uploaded the failed login script stopped working. I guess different error codes are used when using a custom webauth.
Think Cisco need to update the templates anyway for the latest browsers.
Thanks,
Darren

I'm not sure if this would help, but could you use this command to stop the checks for multiple logins and hopefully not generate the error code? From the 7.0 config guide:
"config advanced eap max-login-ignore-identity-response {enable | disable}—When enabled, this command limits the number of devices that can be connected to the controller with the same username. You can log in up to eight times from different devices (PDA, laptop, IP phone, and so on) on the same controller. The default value is enabled."

Can no longer select text in email template or read only field with mouse using IE or Firefox?

Hi Guys,
I can no longer select text in email template or read only field using my mouse in IE or Firefox anymore. We are using CRM 2011 rollup 18 applied with IE 11 and the latest version of Firefox. We only applied roll up 18 in Feb when this issue began.
Thanks
Dave
David Kelly

When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove the site's cookies (save any pending work first) using either of these. While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?
These features rely on JavaScript, and it sounds as though you have scripting enabled if you get (the wrong) color changes. Some add-ons might alter the way scripts operate, so a standard diagnostic to bypass interference by extensions (and some custom settings) is to try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode."
If those features work correctly, this points to one of your extensions or custom settings as the problem.
To also disable plugins, you can use this page:
orange Firefox button ''or'' classic Tools menu > Add-ons > Plugins category
Any change?

A method to create completely customized photo book page templates from scratch in Lightroom 5

I was able to successfully create completely customized Lightroom 5 page templates (including altering the number of, positions, and sizes of pictures) by making edits to the templatePages.lua file(s) in the Lightroom directory tree. I have never heard of the LUA file format before, but it is ASCII and looks somewhat like XML, so it was fairly easy to decipher. Here is a high-level description of how I did it. This applies to Lightroom 5 on Windows 7. If this doesn't make any sense to you, then don't try it - you're likely in over your head. Although my description is brief and lacking in detail, it should enable someone who is capable of handling this to figure it out with a little of careful trial and error. Do this at your own risk - if you screw-up your installation, catalog, or computer, it's your own fault. It all worked great for me.
First, open the "<lightroom 5 install directory>\Templates\Layout Templates" folder. Then navigate to the template set that contains the template you would like to use as a starting point for the new template. For example, "12x12-blurb\clean12x12". Make a back-up copy of the templatePages.lua file in case you mess something up and want to revert.
There will be a bunch of .jpg files in this directory that each contain a preview image of the layout that carries the same name as the .jpg file. Find the one that you would like to use as a starting point. Take note of the name of the file, which is probably something similar to "page_26_preview.jpg". Duplicate the file and rename it to something unique, such as "dummy_preview.jpg". It's just temporary, so it doesn't matter what name you pick, provided it is a legal file name with no spaces.
Next, open the templatePages.lua file in a text editor. I suggest using one that can automatically recognize and format ULA (such as Notepad++, which is open source and free to use). Then search the file for the unique portion of the file name you took note of earlier, such as "page_26". It will point you to a section in the LUA file that describes that particular template. Carefully copy that entire section, including a balanced number of brackets (starting with the two brackets and commas before "children" and ending with the one bracket and comma after the "title" line. Paste the copied text into the end of the file on a new line immediately following the bracket and comma after the "title" field for the last page template section (right near the end of the file). Change the "previewName" field to the name of the preview file copy that you created ("dummy_preview.jpg" for me) and the "name" field to the name of the new template you're creating ("dummy" for me, since it is just temporary). Next change at least one of the hex characters in the "pageID" field such that the new template will have a unique page identifier.
Now you can make edits to the photo and text fields included in the new section, using other templates in the template file as examples. "x" and "y" fields are coordinates (in pixels) for the bottom-left corner of the picture or text field, "height" and "width" are the width of the field in pixels. The fields should be mostly self-explanatory, but make sure that the "photoindex" fields are filled-in starting from 1 to N, where N is the number of pictures in the template, with no duplicates or gaps. They do not need to be in order. Treat the "textIndex" fields similarly for text fields. If you want to add an additional picture or text field, simply copy the section describing a picture or text field from another template and paste it, carefully, into the new template that you are creating.
Once you are done, save the file (you may get interference from Windows UAC, in which case save the file elsewhere and the move it back to the correct directory). Then open Lightroom. Create a new photobook, and choose the new template for one of the pages, remembering that the preview image will look like the JPG that you copied. Voila! If you didn't screw anything up, you should see a page based on your new template. Then right-click the page and select "Save as custom page", which will cause a fresh preview file to be created for your new template and your template to be copied to the "custom pages" section of the template menu. The new section you added to the "templatePages.lua" and the "dummy" preview file can now be deleted, since they are no longer needed. I save them so that I may simply overwrite them the next time I need to create a customized template.
Enjoy, and please share any clarifications, corrections, or enhancements to my process.

peter at knowhowpro wrote:
DHWachs wrote:
This post was great! Thank you so much. But I am hoping you know one more thing related to this. In the "transform" section of the definition (where the x/y coordinates are set along with height and width) there is an option called "angle". I was hoping that changing this value would allow me to offset the angle of the picture. However, if I put any value there other than 0 the template becomes unusable.
Do you happen to know what this option does?
I haven't looked into the files, so this is just a guess based on how some graphic applications work. It's common to think of rotating a shape as pivoting around a center point, but It's possible that the file sets a value for the rotation point not at the center. In some graphics applications, you can set a shape's pivot at any corner or in the middle of any side, of the rectangle that contains the whole shape.
So, your value may be rotating the shape around a pivot that moves the shape into some area that upsets the behavior of other shapes. Just a thought.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
Peter's point is a good one. I would also assume that the "angle" property allows you to rotate an image, but I haven't tried it myself. One thing to investigate - are there any page templates included in LR that have image placeholders that are at an angle (I don't recall any, off-hand)? If so, looking at the associated .lua file could provide insight into how an angled image placeholder should be described.

Generation of report in landscape mode using PDF template

Hi,
I am creating a report using pdf template, I have used the repeating group i.e I have used the code <?rep_field="BODY_START"?> and <?rep_field="BODY_END"?> as the repeating area and with the field which needs to be repeated i have used the code <?rep_field="T1_G1"?> in order to display data in the loop.
But finally when the report is displayed, the report acts strange ...sometimes it fails to open says that an internal file read error occured , whereas if I remove the <?rep_field="T1_G1"?> code it works fine , other times if at all it displays the report, the values in the repeating field operlap each other and they are vertically oriented wheras for landscape mode it should be vertical, I tried setting the properties and locking the fileds but all in vain.
Kindly help ASAP!!
Thankz
-Gaurav

I have had the same problem for a year. I never got my TAR answered so I tried again. I am waiting...again. Portrait works fine for me. I am using it to generate po's with custom headers. The only part that does not work for me is the total appears on every page, not just the last one. If I get an answer, I will let you know...

Variable multiple single value filled with customer exit used in FOX form.

Hi guys, I definitly need your help in the following scenario:
I have variable (multiple single value) filled in a customer exit and use it in web template. There it is used in the drop down box for selecting a special date in the analysis item. And there comes the first question:Why the results from the customer exit are written in the way "date1; date2; date3" in one line? They should appear line by line in rows. How can I influence that? I tried both data binding types, "variable" and "characteristic".
Now a button raises a planning function with a fox formula which should write the selected date (from the drop down box) in a customer table using "call function".
I always get the error, that I need to restrict the variable to "single value". Why do I have to do that and if necessary how can I do that? Other planning functions without the fox formula also work properly with using the selection from the drop down box.
I appreciate you help.
Kind regards, Anja.

Hi Vamsi.,
Try this code.
WHEN 'PREVIOUS_YEAR_1'.
IF I_STEP = 2. "after the popup of user entry
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZCURRENT_YEAR_PERIOD'.
break-point.
IF SY-SUBRC EQ 0.
WA_YEAR = LOC_VAR_RANGE-LOW+0(4). "Year
WA_MONTH = LOC_VAR_RANGE-LOW+5(3). "Period
WA_YEAR = WA_YEAR - 1.
CONCATENATE WA_YEAR wa_month INTO WA_FISC_PERD .
CONCATENATE WA_YEAR WA_MONTH1 INTO L_S_RANGE-HIGH .
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDIF.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDIF.
ENDIF.
ENDLOOP.
endif.
Assing points if it helps you.
-- Selva

Custom Tab Missing in Template Section

Hello -
I recently migrated to SharePoint 2013.    Under Site Settings > Web Design Galleries > Solutions, I can see that my site templates carried over.   They have been activated.    However, when I go to create a
new subsite, I noticed that the Custom tab is missing.    Any suggestions on how I can retrieve that?

I was able to modify the manifest.xml file, and repackaged the .cab using IZarc.   I renamed it to a wsp and uploaded to the site Solutions and was able to then click the Upgrade button.   it's activated, but there still isn't a Custom
tab.    When I recreated the template in 2013, I was able to see the Custom tab.
I guess there isn't a real easy way to migrate 2010 site templates to 2013.
Here they mention to recreate using 2013, but I wonder what companies that have hundreds of custom site templates would do it their case?
http://technet.microsoft.com/en-us/library/jj219648.aspx
Q: I receive an error that I cannot create a subsite based on a site template because the site template uses the 2010 experience version and my site collection is in the 2013 experience version
A: Recreate the site template in the 2013 experience.
To recreate the site template, create a new subsite based on the 2013 experience, customize it again to match the template that you had, and then save the customized subsite as a template (on the
Site Settings page, click Save site as template).

WLC 7.2 - Custom WebAuth using waep Template w/ HTTP Only

Similar Messages

Maybe you are looking for