WLC sending a message of AP under attack

Hi to all,
I've been getting this message from my WLC and I'm not able to find what doest it really mean and if there is something that could be done in order to solve it.
"Warning : Our AP with Base Radio MAC 00:14:a8:53:0b:20 is under attack (contained) by another AP on radio type 802.11b/g"
"Warning Cleared: Our AP with Base Radio MAC 00:14:a8:53:0b:20 is no longer under attack (contained) by another AP on radio type 802.11b/g"
Can this cause me problems in the performance of my wireless network???
Thanks in advance for your help.

Hi,
The firmware is 4.2.112.0
Thanks in advance for your help.

Similar Messages

  • How to stop "Cannot send email" message?

    Whenever I send a message in Mail under Lion, I get a dialog box that says it cannot send the email because I haven't chosen a preferred server for my account. That's not true. For each account, I've checked the box that says "Use Only This Server."  The message composition window doesn't have a place to choose an outgoing server, as previous Mail versions did, so it should just take the one that goes with the email address that's the account sending the thing, but it doesn't. Does anyone have a suggestion as to how I can stop this from happening? Thanks.

    Mail>Preferences>Accounts. Make sure the Outgoing server is as your ISP wants it to be.

  • WLC Warning Message: Our AP is under attack

    Hi there,
    I receive this Warning message in WLC version 5.0:
    Warning: Our AP with Base Radio MAC 00:1f:6d:b9:48:d0 is under attack (contained) by another AP on radio type 802.11b/g
    So, what does it means? Can someone explain..Great Thanks.

    I am getting the same message, but I've not been able to diagnose the issue yet.
    It seems that the AP is being contained by another wireless system. However, there is no information that I can find to indicate what is "attacking" or "containing" the AP.

  • After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I see my buddy, but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies.

    After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I am using gmail, and I see my buddy (no camera icon next to her name), but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies. My buddy has the same problem as I.  We are able to do video chat through gmail, but I had hoped to use iChat.  I am using OS 10.6.8, iChat v. 5.0.3.  What am I missing?

    HI,
    iChat will Video chat to another iChat in a Jabber Buddy List (Google run a Jabber server for GoogleTalk)
    However it will not Video to the Web Page login to iGoogle or the Web Mail Page login.  (where people can Google Chat as it were in a  Web Browser).
    Nor does it video to the Google Talk Stand alone app for PCs or any other Jabber apps on any platform.
    iChat uses a connection Process called SIP (Session Initiation Protocol) which is also used by other VoIP devices.
    Jabber/XMPP invited the Jingle Protocol for Jabber Applications.
    Google have included this in their Standalone app and the Plug-in for Web Browsers on both PCs and Mac (you can get this as a Standalone Plug-in or as part of Chrome)
    More on this here  This article has been changed several time in the recent months.  It now claims a greater involvement by Google in writing the Jingle Library (Although now Google's version does not work with the others)
    This tends to mean that using the web Login to Google to Chat also cannot video chat to other Jabber apps that are using Jingle.
    If your Buddy is using iChat then check the Video Menu has two items to Enable Camera/Video chat and Microphone/Audio chats are ticked.
    In the View Menu the Show Status Items should be ticked (Selecting them toggles the tick and the function On or Off)
    It could be Internet speed but at this stage I would doubt this at this stage.
    10:27 PM      Saturday; January 21, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Using iMessage 8.0 with Mavericks to send sms message to my friend who has an iPhone.  Only allows me to log in under AIM, YAHOO, GOOGLE, or BONJOUR.  I don't want to do any of that.  Just my phone number.  Is this possible?

    Using iMessage 8.0 with Mavericks to send sms message to my friend who has an iPhone.  Only allows me to log in under AIM, YAHOO, GOOGLE, or BONJOUR.  I don't want to do any of that.  Just my phone number.  Is this possible?

    Hi,
    The first run of Messages will ask you to enter an Apple ID to "register' with iMessages.
    If you do not do this but open the App and look in Preferences > Accounts then you will see the iMessages account and the Bonjour Account which will not be activated.
    Neither of these two account can be deleted. (even if not being used)
    If you then press the + icon to add you will get the choices you posted.
    To iMessage you need to "register" and Apple ID with the iMessages service.
    As Diane then points out you can link this to your iPhone number.
    This "syncs" (Displays on all devices) the various iMessages sent to either iPhone or Apple ID
    You can then chose  on both iPhone or Mac version how or which ID/Number is going to be used to "Start the conversations from"
    I have my Mac version set to start from my Apple ID and the iPhone from it's number.
    At this moment the Mac version cannot send SMS text messages to an iPhone.
    This is apparently coming with iOS 8 and OS 10.10 (Yosemite)
    An AIM account can send SMS Messages but only to a limited number of USA based phone users on these carriers.
    (Basically you add a phone number with country code +1 as a Buddy to your List)
    Mocked up number  (It not really an auto responder although you do get sent back and Error message about it not being valid)
    8:37 pm      Sunday; July 13, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Can't get Send Video Message under conversation tab to be black

    Put in new contact and when I try to video call can't get thru...I see under the conversation tabb that Send Video Message is greyed out.  How do I get it to black to be able to send a message?

    It seems to be an ongoing issue the last couple of days..there's a few posts already discussing it in the forum. I found that if I sent the photos from my verizon acct on the iphone, it uploaded to the gallery fine..so it's a .mac account problem i think. Try it through another acct and I don't think you'll have a problem. It had always worked fine for me sending from my mac account until this weekend.

  • I have an iPhone 4 and under a Pay As You Go plan. Why can't I send picture messages?

    I have an iPhone 4 and I'm paying my bills through the Pay As You Go $50 Monthly Plan. Lately, I couldn't send pictures messages or have wireless access to anyone on my phone. I'm able to send text messages and make calls but can't send picture messages or unable to have wireless internet unless it's under a Wi-Fi. If I'm under a GoPhone plan, what plan should I purchase in order to send pictures and have wireless access to my phone? Should I switch over to the the $65 Monthly Plan? Purchase the Feature Packages? Please help

    settings->general->mobile data->mobile data network->mms
    require the carriers mms info for you to send or recieve mms's

  • I have three iPads and one iPod and one iPhone.  How can I message between them without sending the message to all of them.  You send the message to your email address but all of them are set up und one account.

    I have three iPads and one iPod and one iPhone.  How can I message between them without sending the message to all of them.  You send the message to your email address but all of them are set up under one account.

    You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.

  • Can't send text messages (can only recieve). How do I change Service Center Number

    Hello. As my subject states, i can't seem to send text messages (but i can receive them). I'm told by my carrier that i need to change my service center number (and they provided it). I've been looking all over the phone for this option, and can't seem to find it. I keep seeing posts saying "On your device: Options > SMS > Service Center." but "service center" does not appear when i go to options>SMS text. I see the following; screen options conversation style: show names: message options priority: callback number: disable autotext: so my question is;, where do i find this?

    ayall wrote:
    firstly - if i'm posting in the "BlackBerry 9500 Series Smartphone" setion,
    I have a bit more than 30 messages on this forum, and my experience says that many people do not post in the board that matches their device. So it's a good idea to make sure.
    ayall wrote:
    you can see under avatar it cleraly says "My Device: BB Storm 9530"
    you did publish it in your "private information" part in your profile. But you have to configure your profile to allow people to view your private information. Here is a screenshot of what I see :
    please listen to people when they are trying to help you.
    A bit of politeness does not cost much either.
    That being said, we will nevertheless try to help you.
    Please state your OS version (4 numbers seperated by fullstops).
    When you go to home screen >> options >> sms,  please write down here all what is written in this page.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • I don not want to use imessage at all. I turn it off in settings, but when I go to send a message, it is asking me once again to sign in with my apple id. Then it turns imessage back on, which I do not want.

    I am trying to completely turn off imessage. Although I do turn it off in settings, under messages, and when I attempt to send a message it is asking me to input my apple id and will then proceed to turn imessage back on. Too many of my clients do not have apple products. Someone help!

    When I attempt to send a message it is asking me to input my apple id and will then proceed to turn imessage back on.
    That is because the iPad can only text using iMessage.

  • Sending PI message in case of Payment Cancellation and Check Number Voided

    Hi ..
    I've a requirement to send a message to PI wth the required invoice header fields whenver any payment document number is cancelled or check number is voided. I know we can cancel the payment or check payment through tcode FCH8 and the module program for this is SAPMFCHK.
    I have no idea where would i put my custom code in the check payment cancellation wherein i can put my invoice fields and the proxy code so that I can send a message whenever any check payment or payment is cancelled.
    Please help me if you have come with the similar requirement. I think i need to create an enhancement and put my codes inside that but not sure how do to this.
    Thanks,
    Shamim

    Hi
    I guess You need to create substitution for this purpose. In your case reversal document get created for your original FI document.
    Go through http://wiki.sdn.sap.com/wiki/display/ERPFI/Creatinguserexitsforsubstitutions
    First check GCX2 transaction if there is already any Z Program attached for your application area. If yes check if it is active in SPRO
    Special Purpose LedgerTools-Maintain Validation/Substitution/Rules---Maintain Substitution
    You can create substitution ZTEST under
    Financial Accounting----Document header for field "reversal Indicator" and if you do F4 in field "Exit" you will see the exit created by you as per wiki.
    I think you can create substitution on field "reversal Indicator" but its your choice. Check if your exit gets trigger.
    Try creating a event to trigger proxy or submit program etc...
    Hope this helps.
    Regards
    Vinit
    Edited by: Vinit Joshi on Mar 9, 2012 8:20 PM

  • Tutorial announcement :: How to send a message(s) with attachments ::

    How to send a message with attachments Using Adobe Dreamweaver CS3 and Developer Toolbox...
    - In this tutorial you will use Developer Toolbox features to build a simple contact us form with the advantage to upload file with your message and send this file via e-mail as an attachments.
    Using This application will allow to:
    * insert records into database and then send them via e-mail.
    * upload files to the server.
    * send message with uploaded files as attachments.
    This tutorial contains one part
    1. insert record, and then send it by email with (attachments).
    By following this tutorial section, you will create:
    * Page for inserting records.
    * Page for thank you when the message is sent.
    :: To View the tutorials ::
    :: Online Demo ::
    Brought t you by:
    www.developer-online.com

    Open the photo, assuming it is in Photos, and then in the lower left corner under the photo is a box with an up-pointing arrow.  Tap that box, and then the photo will have a blue circle with a checkmark in its lower right corner and the word Next at the upper right.  Tap Next, then choose how you want to send the photo, by text message, email, and so on.  Simply address the method you have chosen and put in any text you want to include.

  • I am getting this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles

    I am trying to send a message with an attachment, I get this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles help us stop spammers.). Please check the message and try again.
    == Today

    Me too (with Thunderbird). EXCEPT it reads
    Requested action not taken; This account is currently blocked from sending messages. If you don't think you've violated the Windows Live Terms of Use, please contact customer support...
    Occasionally the mail "sends", but it is unpredictable. Tech Support at Qwest (for q.com under Windows Live) does not find a problem at their end.
    More suspiciously, the same account accessed from my Mac does not seem to exhibit this problem. Have reloaded T'bird. Recurred again.

  • Communication error when sending PI message from Integration Engine to AE

    Hi Experts,
    we currently installed and configured PI 7.3 system. Even I run post installation PI configuration several times, we are still facing error when Integration engine sends message to messaging system. ( my scenario: I send test message to IE directly, avoiding AE )...
    It might look easy: but even adding PIISUSER full authorization and system restart, the result is the same. I don't know if it could have connection but I also get HTTP 200 instead of HTTP 500 when testing INTEGRATION_DIRECTORY_HMI destination.
    Thanks for any help.
    <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
      <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
      <Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
      <Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
      <Trace level="1" type="T">URL = http://xxx:xxxx/MessagingSystem/receive/AFW/XI</Trace>
      <Trace level="1" type="T">User = PIISUSER</Trace>
      <Trace level="1" type="T">Cached =</Trace>
      <Trace level="1" type="T">Security: Basic authentication</Trace>
      <Trace level="1" type="T">Serializing message object...</Trace>
      <Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
      <Trace level="1" type="T">HTTP Multipart document length: 2948</Trace>
      <Trace level="1" type="T">Timeout: 0</Trace>
      <Trace level="1" type="T">HTTP-client: request sent</Trace>
      <Trace level="1" type="T">HTTP-client: response received</Trace>
      <Trace level="1" type="T">HTTP-client: status code = 401</Trace>
      <Trace level="1" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
      </Trace>

    Hi,
    So this password change in Exchange Profile + su01 transaction + system restart didn't help.
    I increase trace level, and this is even more detailed log in pipeline step Call Adapter.
    We also find out that when message arrive to IE we have in java log three entries:
    LOGIN.FAILED
    User: N/A
    IP Address: xxx
    Authentication Stack: sap.com/com.sap.aii.af.ms.app*MessagingSystem
    Login Module                                                               Flag        Initialize  Login      Commit     Abort      Details
    1. com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule    SUFFICIENT  ok          exception             true       Received no SAP Authentication Assertion Ticket.
    2. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT  ok          false                 true      
    3. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          exception             true       Authentication did not succeed.
    This log is logged under J2EE_GUEST User.
    LOGIN.OK
    User: SLD_CL_PIQ
    IP Address: xxx
    Authentication Stack: sap.com/com.sap.lcr*sld
    LOGIN.OK
    User: SLD_CL_PIQ
    IP Address: xxx
    Authentication Stack: sap.com/com.sap.lcr*sld
    Last two logs are logged by SLD_CL_PIQ user.
    Thanks for any help!
    <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
      <Trace level="3" type="T">Channel for adapter engine: File</Trace>
      <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
    - <!--  ************************************
      -->
      <Trace level="2" type="T">no values in cache (no lock found) - start reading from SLD</Trace>
      <Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
      <Trace level="2" type="T">Adapter Framework(s) found</Trace>
      <Trace level="2" type="T">Service Port(s) found - take first one</Trace>
      <Trace level="2" type="T">URL found</Trace>
      <Trace level="2" type="T">no values in cache (lock found) - start reading from SLD</Trace>
      <Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
      <Trace level="2" type="T">Adapter Framework(s) found</Trace>
      <Trace level="2" type="T">Service Port(s) found - take first one</Trace>
      <Trace level="2" type="T">URL found</Trace>
      <Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
      <Trace level="1" type="T">URL = http://xxx/MessagingSystem/receive/AFW/XI</Trace>
      <Trace level="1" type="T">User = PIISUSERA</Trace>
      <Trace level="1" type="T">Cached =</Trace>
      <Trace level="3" type="T">Creating HTTP-client</Trace>
      <Trace level="3" type="T">HTTP-client: creation finished</Trace>
      <Trace level="1" type="T">Security: Basic authentication</Trace>
      <Trace level="1" type="T">Serializing message object...</Trace>
      <Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
      <Trace level="1" type="T">HTTP Multipart document length: 2941</Trace>
      <Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
      <Trace level="1" type="T">Timeout: 0</Trace>
      <Trace level="1" type="T">HTTP-client: request sent</Trace>
      <Trace level="3" type="T">HTTP-client: request sent</Trace>
      <Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
      <Trace level="1" type="T">HTTP-client: response received</Trace>
      <Trace level="3" type="T">HTTP-client: checking status code...</Trace>
      <Trace level="1" type="T">HTTP-client: status code = 401</Trace>
      <Trace level="3" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
      </Trace>
    </Trace>

  • How to send a "Message" that has text along with a photo

    I take a photo with my iPhone5.
    I want to send both the photo and a brief message along with it.
    I touch the little arrow in the lower left hand side.
    If I select "Message" there does not appear to be any way to enter even a minimal amount of text.
    I know that I can "Email" it but this seems overkill.
    How can I send a "Message" that contains both a photo and text?
    Thank you.

    After selecting Message, you should see the pic in a white message box.  Just tap the screen in the box under the message.

Maybe you are looking for

  • Using a Maxtor external hard drive

    I am using a Maxtor external hard drive for time capsule. I have recently re formatted it to use with my new mac and want to know if i delete something off of the hard drive on my mac - will this mean in will be removed from my hard drive too?

  • Subcategories in Graphs

    Dear All, How can one inlcude sub categories under a category for graphs? Appreciate your help. Regards, Prosenjit. Edited by: prosenjit chaudhuri on Dec 15, 2008 11:04 AM

  • Make Slideshow Play on external Monitor or Projector

    Every time I start a slide show it starts full screen but on the screen where bridge is open. I would love it if you could designate on what screen you want the slideshow to play if you have a projectore of multi screen setup...

  • How to backup chat history in a messenger app

    I did buy a new iPhone 5. And when I went to Apple store to get my new order, I found all the chat history or document history in messenger or picture fixing apps were restored in my new iPhone 5. Please, anyone knows how to backup chat history in me

  • Worklists appear only in read mode

    Hi, I had created a worklist, to which i added some objects(iViews) and clicke the relaease worklist. but when trying to publish it, the worklist is opend only in read only mode (even from the admin user). how to change it to edit mode. Can anyone he