WLDL files exported from XI 2.0 not valid for Web Service Clients

Hi there,
Im struggling for almost a week with a BAPI WSDL file exported from the XI repository. My scenario is very simple; A BAPI in R/3 exposed as web service through XI using the SOAP adapter.
The intention was to generate a Web Service Client based on this WSDL file, unfortunately I get all kind of errors when trying to generate the client. (using tools like, SOAPScope, XML Spy and WebSphere Developer Studio none of this tools can validate the generated WSDL file obtained from XI)
Can someone Please explain me how/what exaclty do I have to do in order to expose my BAPI as Web Service in XI 2.0? Or Please tell me if this is just impossible in this version of XI.
Thanks a lot!
Rob.

Hi Rob,
It seems that when exporting to a WSDL file from the Repository, <service> and <binding> are missing from the structure.
A way to work this out is to either add them maually, or to create the WSDL from the Directory, using the Create End Point as Webservice in the Tools menu.
When you do that, consider a couple of things:
1. The message interface, by which you create the wsdl should be inbound. The message interface in the scenario should be outbound.
2. In the binding section, the produced url is of the intergration server, and you need to change it to that defined in the SOAP adapter configuration.
Hope this helps.
Avihai

Similar Messages

Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

Good morning,
I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
Installation goes plain until around the end of the progress bar, it stops on the setup of
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
I've put in my SkyDrive the error log I received after the install;
I'm at full disposal if you need further information,
thank you in advance
Best regards
Francesco

Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above:
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
Then, I just got my account added as Local Admin and then tried to start the service and was able to.
However, I am not sure whether same was the case for you.
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

Class not found for web service

hi,
I'm tring to develop a simple web service using axis 1.3 and Tomcat 5.0 as container and server but I've got some problem catching some class. I've downloaded all the jar files (all the org.apache.axis.* and all in the WSDP2.0) but when I open jar files I get only the *.class and not the *.java.... I use the NetBeans IDE 5.0 to develop all the class but it say that it can find all these class.
(I've put all the needed jar file in the library of the package)
actually I need the AdminClient.java, Service.java all the jaxrpc.
I think it could be really a simple problem.... but I don't know how I can go on....
thanks

I've just done the download of wsdp 2.0 or the previous version but in all jar file I can find only files with extension *.class. I need the *.java ?Isn't it?
It's possible that the problem is using netbeans 5.0?
I don't think so because also from the dos command line I can't found the property class....( java2wsdl.java )

MSI Live Update-The requested control is not valid for this service.

That's the error message I keep getting when I start lu3. Why is this happening? I am the only user of this computer and I am the administrator of course. I need help. Thanks.

try uninstalling it and then home top left and get latest

Exporting from Illustrator to Photoshop: Not Enough Memory To Save File

Exporting from Illustrator to Photoshop: Not Enough Memory To Save File
I have plenty of memory (6 GB) and the files I try to export are not very big (some less than 5 MB). Yet, I keep getting the above message: Not Enough Memory To Save File
Any suggestions?
Many thanks!

Up-thread, John Joslin mentioned that "memory" is more than RAM. It is RAM, Virtual Memory, Scratch Disk, and is also governed by the allocations for your Adobe programs (in this case).
The first thing that I would explore is the Windows Virtual Memory (Page File) settings. This ARTICLE might give you some tips.
Also, see this ARTICLE on setting up a computer for an editing session. It's geared more towards doing video editing, but applies to PS work too.
Then, go to Edit>Preferences in both PS and AI, and check the allocation of your memory. Too often, people run that up, and then they starve the OS, or any other programs.
Good luck,
Hunt

Wish to post KeyNote file as pdf. Export from KN to iW not working

Wish to post KeyNote file as pdf. Export from KN to iW not working - get blank screen. Tried to upload PDF to mobile me and link to that file - also didn't work. I'm not familiar with iFrames but have read about them in this forum - is that my only option? Why wouldn't a KN export work?
Thanks, Brian

I have just tried this with a test site and publishing to a folder and it does work perfectly for me.
I had a Keynote document already so all I did was click on File and then selected the Print option. I then selected the save as pdf option the the pdf document was created on my desktop instantly.
All I then did was open iWeb and type some words in a text box My Prices. I then highlighted My Prices and opened the Inspector and went to Hyperlink and clicked on the option Hyperlink to a file. I then selected the pdf file from my desktop.
I then used ftp to a folder on my desktop and when I opened the appropriate page, I click on the words My Prices and the pdf file opened straight away.
As OT has suggested, check that you have linked to the correct file. If it does not work, either you have not created the pdf correctly or at all or you have not linked to the correct file.
As I said, it worked for me.

HT4489 Hi all, I have .vcf contact file exported from yahoo and need to import it to cloud. When I try to import it I get an eror "53 contacts not imported, eror reading vCards". Pls help ty

Hi all, I have .vcf contact file exported from yahoo and need to import it to cloud. When I try to import it I get an eror "53 contacts not imported, eror reading vCards". Pls help ty

1 - Select the thumbnail of one of the problem photos and use the File ➙ Reveal in Finder ➙ Original menu option. This will take you to the folder containing the original file with that file selected by the Finder.
You can also use Find Any File to search for that file (get the file name from the Info pane in iPhoto). You will find the thumbnail version and maybe an edited version also. Made sure what is found is the large, original version and note were it's located. Search all of your drives with FAF just in case.
If you don't fine the full sized version then the only recourse is to use a file recovery application like SubrosaSoft FileSalvage on your drives to see if any of your full sized photos can be recovered. If you find enough files to make the purchase of the software worthwhile buy it and recover the files. However, since it may have been quite a while since you discovered the missing originals it seems unlikely you'll be able to recover any due to being overwritten.
2 - book projects are just entries in the library databases and can't be exported to another library.

EMail Link in SWF exported from InD CS5 does not work

I'm trying to find a definitive answer on this. I have designed an interactive document in InD CS5 that has buttons and hyperlinks. When exported to SWF everything works except my e-mail hyperlink. It works fine in InDesign's preview pane. I've uploaded the file to my webserver for testing, the problem still occurs.
I found one post in another forum that quoted an Adobe InD developer stating that as of CS4 email links were not exported. However, I've not been able to find any mention of whether this works in CS5 or not.
Does anybody know for sure whether or not email links work in SWF files exported from CS5?

Sorry, no offense was intended. I had found references to problems with CS4, but nothing about CS5, and said as much in my post -- was frustrated that I had spent a long time looking and hadn't found any responses yet.
You mentioned using buttons rather than hyperlinks, and that worked for me -- but it might have just been a problem with my browser not properly reloading the flash file, too -- as I mentioned in my response.
But in any case, THANK YOU FOR YOUR SUGGESTION!

Aspect ratio issues in iDVD with mov files exported from FCE

Please help. I believe this is an iDVD bug. I have found some relevant discussion of it on online forums - but have not found a solution that works for me. I am looking for a workaround.
http://discussions.apple.com/thread.jspa?threadID=1356500&tstart=31
PROBLEM STATEMENT:
My 4:3 movies, exported from FCE in QT-with-conversion formats (any 4:3 format) - appear in iDVD with gray side-pillars (as expected for 4:3) AND with a black line (letter-boxing) at top and bottom - as would be for 16:9. It appears the aspect ratio is also distorted i.e. 16:9. (The iDVD project is set to 4:3.)
1- A 4:3 mov file exported from FCE using Quicktime Movie format (no conversion) does not have the problem, but I cannot de-interlace the video using this export mode.
2) A 4:3 mov file exported using QT-with-conversion mode (any 4:3 format) DOES have the problem. I need to use this mode in order to get de-interlace.
(Exception: 640x480 VGA mode does not have the black lines, and it displays correctly in dvd player on my computer screen - but on the TV screen, it crops content from the top and bottom of the movie, so this is not an option.)
3) In Finder, if you click on mov file exported QT-only (no conversion), it opens in the FCE viewer. If you click on mov file exported in any other 4:3 mode, it opens in Quicktime viewer (i.e. there is absolutely something different in the header/ID of these files.)
4) All mov files, regardless of export mode, show correctly in Quicktime viewer - no black line, no distortion. The problem does not occur outside of iDvd.
5) I tried passing the QT-with-conversion mov files through an Inverse-Anamorphicizer (per suggestion on forum - this apparently fixed the problem for some people) but the resulting output mov (i.e. the inverted product) still had the same problem.
I am, so far, left with this trade-off: Give up the de-interlacing, or live with the letter-boxing/ distortion. Neither is acceptable.
I am looking for a workaround:
1) A way to export de-interlaced 4:3 mov from FCE that shows in correct ratio in iDVD
2) A way to "convert" / re-head mov file after exported so that it displays corrrectly (inverse-anamorphicize) so that iDVD reads it correctly
3) Can the mov be de-interlaced after the fact (so I could use QT export without conversion)?
4) Something besides iDVD to put this together - that doesn't have this problem? (I like and want to use the iDVD menu/theme.)
5) Other?????
I also notice that all the QT-with-conversion mov files are 1/3 to 1/2 the size of the QT-only mov file, which is valuable and preferable to me. (I don't see any quality difference in the display...)

In the Preview window > top frame > middle button
do you have correct for pixel aspect ratio checked or not?
!http://i533.photobucket.com/albums/ee340/gogiangigo/Picture1-4.png!

How to import a *.dmp file (exported from 10g) to 8i database?

Hi everybody!
Could anybody tell me how to import a *.dmp file (exported from 10g) to 8i database?
I have tried but it seemed to be error "wrong version".
Thanks a lot!

From 10.1.0 to 8.1.7 => Use the EXPORT 8.1.7 to export the data from the 10.1.0 database and IMPORT 8.1.7 to
import the data into the 8.1.7 database.
Metalink note 132904.1 Subject: Compatibility Matrix for Export & Import Between Different Oracle
Nicolas.

Favorites exported from Internet Explorer are not available in Bookmarks drop down list as they should.

Favorites exported from Internet Explorer are not available in Bookmarks drop down list as they should. Where can I find them?

You can usually find the imported IE Favorites in a folder ("From Internet Explorer") at the bottom of the Bookmarks Menu folder (Bookmarks > Organize Bookmarks).
If you can't find them in the "From Internet Explorer" folder then try this:
Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export 
Import the HTML file in Firefox 3: Bookmarks > Organize Bookmarks > Import & Backup > Import HTML: From File
http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file")

Illustrator error opening eps file exported from sketchup pro 8

When I attempt to use Illustrator CS6 to open an .eps file exported from Google Sketchup Pro 8 I get the following error message "the file is an unknown format and cannot be opened". If I try to place/link the file I get this message "can't place the illustration. Could not set a position inside the file." Any thoughts on why I'm having this issue? Is there an eps version compatibility issue I should be aware of?

Hi Mike. Here is the screenshot you requested.

How do i send an html file exported from muse as email blast with images and live links?

My question it:
How do i send an html file exported from muse as email blast with images and live links?
I have designed a "website" in adobe muse and exported it as an html file. I am not sure how to send my .html file in an email!
Best,
Nicole

Unfortunately, the answer is, you don't. The requirements for HTML displayed in an e-mail reader are very different than those for HTML displayed in a browser. The output of Muse won't work as an HTML e-mail. You could upload the Muse site as a website and provide a link to it in an e-mail, but the HTML generated by Muse is not suitable for direct display by an e-mail program.

Lightroom and DxO: fix lens flaws in a TIF file exported from LR

Hi,
I'm in love with LR, I don't mind if people tell me that other Raw converter do a better job in demosaicing. Anyway some time ago a friend told me about DxO Optics Pro, I tried and loved the lens corrections. I thought I could prform those correction at the end of my workflow on a Tiff file exported from LR to DxO. No way! It seems that DxO doesn't recognize the lens used to shoot the image. It seems that LR and Camera Raw delete all the infos related to optics used. Any help would be appreciated.
Bye!

I used the following command to swap exif data:
exiftool -all= -tagsfromfile DSC_0002.NEF -exif:all DSC_0009-2.tif
The TIF file contais less exif tags than the NEF (or DNG) file, and there is no tag about the lens used.
Here's what I get copying exif data from one file to another:
ExifTool Version Number : 7.70
File Name : DSC_0002.NEF
Directory : .
File Size : 5.7 MB
File Modification Date/Time : 2009:02:25 13:44:44+01:00
File Type : NEF
MIME Type : image/x-raw
Exif Byte Order : Big-endian (Motorola, MM)
Make : NIKON CORPORATION
Camera Model Name : NIKON D70s
Software : Ver.1.00
Modify Date : 2009:02:25 13:44:42
Jpg From Raw Start : 131072
Jpg From Raw Length : 725092
Y Cb Cr Positioning : Co-sited
Subfile Type : Full-resolution Image
Image Width : 3040
Image Height : 2014
Bits Per Sample : 12
Compression : Nikon NEF Compressed
Photometric Interpretation : Color Filter Array
Strip Offsets : 856404
Orientation : Rotate 270 CW
Samples Per Pixel : 1
Rows Per Strip : 2014
Strip Byte Counts : 5095416
X Resolution : 300
Y Resolution : 300
Planar Configuration : Chunky
Resolution Unit : inches
CFA Repeat Pattern Dim : 2 2
CFA Pattern 2 : 2 1 1 0
Reference Black White : 0 255 0 255 0 255
Exposure Time : 1/50
F Number : 4.0
Exposure Program : Manual
Create Date : 2009:02:25 13:44:42
Exposure Compensation : 0
Max Aperture Value : 3.5
Metering Mode : Center-weighted average
Flash : No Flash
Focal Length : 18.0 mm
Maker Note Version : 2.10
ISO : 800
Quality : Raw
White Balance : Auto
Focus Mode : AF-S
Flash Setting : Normal
Flash Type :
White Balance Fine Tune : 0
Program Shift : 0
Exposure Difference : +1.8
Preview Image Start : 8112
Preview Image Length : 24932
Flash Exposure Compensation : 0
ISO Setting : 800
Flash Exposure Bracket Value : 0.0
Exposure Bracket Value : 0
Tone Comp : Normal
Lens Type : G
Lens : 18-70mm f/3.5-4.5
Flash Mode : Did Not Fire
AF Area Mode : Single Area
AF Point : Center
AF Points In Focus : Center
Shooting Mode : Single-Frame
Contrast Curve : (Binary data 4160 bytes, use -b option to extract)
Color Hue : Mode1a
Light Source : Natural
Hue Adjustment : 0
NEF Compression : Lossy (type 1)
Noise Reduction : Off
Linearization Table : (Binary data 1412 bytes, use -b option to extract)
WB RGBG Levels : 555 256 388 256
Lens Data Version : 0101
Exit Pupil Position : 102.4 mm
AF Aperture : 3.6
Focus Position : 0x01
Focus Distance : 3.98 m
Lens ID Number : 127
Lens F Stops : 5.33
Min Focal Length : 18.3 mm
Max Focal Length : 71.3 mm
Max Aperture At Min Focal : 3.6
Max Aperture At Max Focal : 4.5
MCU Version : 132
Effective Max Aperture : 3.6
Raw Image Center : 1520 1008
Sensor Pixel Size : 7.8 x 7.8 um
Serial Number : No= 3005d534
Shutter Count : 31244
Flash Info Version : 0100
Flash Model : (none)
External Flash Flags : (none)
Flash Commander Mode : Off
Flash Control Mode : Off
Flash Group A Control Mode : Off
Flash Group B Control Mode : Off
Flash Group A Exposure Comp : 0
Flash Group B Exposure Comp : 0
Image Optimization : Custom
Vari Program :
User Comment :
Sub Sec Time : 20
Sub Sec Time Original : 20
Sub Sec Time Digitized : 20
Sensing Method : One-chip color area
File Source : Digital Camera
Scene Type : Directly photographed
Custom Rendered : Normal
Exposure Mode : Manual
Digital Zoom Ratio : 1
Focal Length In 35mm Format : 27 mm
Scene Capture Type : Standard
Gain Control : Low gain up
Contrast : Normal
Saturation : Normal
Sharpness : Normal
Subject Distance Range : Unknown
Date/Time Original : 2009:02:25 13:44:42
TIFF-EP Standard ID : 1 0 0 0
Aperture : 4.0
Blue Balance : 1.515625
CFA Pattern : [Blue,Green][Green,Red]
Image Size : 3040x2014
Jpg From Raw : (Binary data 725092 bytes, use -b option to extract)
Lens ID : AF-S DX Zoom-Nikkor 18-70mm f/3.5-4.5G IF-ED
Lens : 18-70mm f/3.5-4.5 G
Preview Image : (Binary data 24932 bytes, use -b option to extract)
Red Balance : 2.167969
Scale Factor To 35 mm Equivalent: 1.5
Shutter Speed : 1/50
Create Date : 2009:02:25 13:44:42.20
Date/Time Original : 2009:02:25 13:44:42.20
Modify Date : 2009:02:25 13:44:42.20
Circle Of Confusion : 0.020 mm
Depth Of Field : 197.49 m (2.01 - 199.50)
Field Of View : 67.1 deg (5.28 m)
Focal Length : 18.0 mm (35 mm equivalent: 27.0 mm)
Hyperfocal Distance : 4.04 m
Light Value : 6.6

Why won't .MOV files export from Lightroom?

Why won't .MOV files export from Lightroom?

The will.
Or at least they can, and do, sometimes, if you have good MOV karma..
Why not supply a little more info, like:
* Which OS
* Which version of Lightroom
* History of MOV files.
* Export format.
* Do other video types export OK
* How many different MOV files have you tried - all with the same history?
and of course:
* What, exactly, happens, when you try?
Rob.

WLDL files exported from XI 2.0 not valid for Web Service Clients

Similar Messages

Maybe you are looking for