WLP 4.0 doesn't find WLS 6.1

All this happed within a few minutes (Assuming it only takes minutes to
install and not hours. It was all the same morning.):
I installed WLS 6.1 sp1.
I installed WLI 2.1.
I tried to install WLI 4.0 and got the message during install:
[[[[ WebLogic Server 6.1 Not Installed ]]]] <- title bar of message box
WebLogic Server 6.1 is a prerequisite for this installation
You do not seem to have it installed to C:\bea
[Exit Installation]
All were installed (or attempted to be installed) in 'c:\bea', which is the
default in all three cases.
There is a folder, c:\bea\wlserver6.1, with the server installed. It appears
on my windows "start" menu with bea's stuff. I can run wlserver6.1 just
fine.
Now ... why is the portal not finding it?
-- Lee Meador ([email protected])

Lee,
The registry file should not be empty - I'm guessing that is the cause of
your problem. You should probably reinstall so it gets recreated. I've
attached my registry file for reference.
Sincerely,
Daniel Selman
"Lee Meador" <[email protected]> wrote in message
news:[email protected]...
The registry entry is there and holds "c:\bea;". Note the endingsemi-colon.
>
That directory hold the beahomelist file and the registry.xml file.
registry.xml is empty.
Is that normal? Or should something else be in there?
-- Lee Meador
"Daniel Selman" <[email protected]> wrote in message
news:[email protected]...
Lee,
Short answer is I don't know, but I might be able to help you
troubleshoot
the problem. The location of your BEA_HOME is stored in the registry(under
Windows!):
HKEY_LOCAL_MACHINE\SOFTWARE\BEA Systems
The installer will then check for the file "beahomelist" in the supplied
directory. It will then use the file "registry.xml" under BEA_HOME to
determine which products you have installed and where they are located.
I
would double check that you have the registry setting and the contentsof
these files looks correct.
Sincerely,
Daniel Selman
"Lee Meador" <[email protected]> wrote in message
news:[email protected]...
All this happed within a few minutes (Assuming it only takes minutes
to
install and not hours. It was all the same morning.):
I installed WLS 6.1 sp1.
I installed WLI 2.1.
I tried to install WLI 4.0 and got the message during install:
[[[[ WebLogic Server 6.1 Not Installed ]]]] <- title bar of messagebox
WebLogic Server 6.1 is a prerequisite for this installation
You do not seem to have it installed to C:\bea
[Exit Installation]
All were installed (or attempted to be installed) in 'c:\bea', whichis
the
default in all three cases.
There is a folder, c:\bea\wlserver6.1, with the server installed. Itappears
on my windows "start" menu with bea's stuff. I can run wlserver6.1
just
fine.
Now ... why is the portal not finding it?
-- Lee Meador ([email protected])
[registry.xml]

Similar Messages

My ipad doesn't find my printer....

How do I make my hp 3510 discoverable to my ipad? The wireless printing works from my laptop which has the same wifi settings, but the ipad cannot find the printer????

Hi Kiwisteve77,
I understand the Ipad doesn't find the printer.
Thank you for your reply.
I will be happy to help you with this.
Try turning the wi-fi off and on again on the Ipad.
If that doesn't work turn the Ipad off and on again.
Check to make sure it is connected to the proper network.
Power cycle the router, Ipad and the printer and try it again if you are still having issues.
I have provided a document for How to Use Apple's AirPrint Over a Wireless Network. Go to the section What if a 'No AirPrint Printers Found' message displays on my Apple device?
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

When I launch I photo it wants me to choose a library but it doesn't find one which is impossible, because i still have no storage. before i can clean up i want to back up them. how can i find my library?

When I launch I photo it wants me to choose a library but it doesn't find one which is impossible, because i still have no storage. before i can clean up i want to back up them. how can i find my library?

You may very well have damaged your library - or even your system by not having adaquate storage available
And never select all of the pitcture and move them - that will destroy your library - the iPhotolibrary is a SQLite database and must always be kept intact as a single entity -
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

ICal search doesn't find anything

when I test this by creating a future event with a particular word in it, then return to today and search for that word in the little "search" box at top right, it doesn't find that word.
Why not?

I have also had long standing problems of not being able to search for calendar events, either from within iCal or Spotlight or using mdfind.
None of the suggested solutions worked for me (removing Calendar Cache file, adding and removing folders or drives to the privacy section of Spotlight to re-index, or running mdimport ~/Library/Calendars.
One clue was that mdimport -d2 ~/Library/Calendars would not even look at the individual .ics files within any .calendar/Events directory (no output). I suspected that this was due to LaunchServices not associating these files properly with iCal. My system had previously been upgraded all the way from 10.0 through 10.6.
What finally worked for me was the following, using the Terminal, rebuilding completely the LaunchServices database:
rm /Library/Caches/com.apple.LaunchServices*.csstore
*defaults delete com.apple.LaunchServices*
*sudo /System/Library/Frameworks/ApplicationServices.framework/Frameworks/LaunchServi ces.framework/Support/lsregister -kill*
*sudo /System/Library/Frameworks/ApplicationServices.framework/Frameworks/LaunchServi ces.framework/Support/lsregister -R -domain local -domain system -domain user*
(note the capital -R in the previous line.)
This step will take a few minutes to complete, with a message about I/O throttleing
reboot (not sure if that is necessary)
*mdimport -d2 ~/Library/Calendars*
This last command should now show the successful indexing of all calendar events.
After this search finally worked again for me!
Regards,
Heiko

Search engine doesn't find vcards

The search engine in Address book doesn't find cards that exist in my ALL. They were cards imported via Time Machine. Any way I can get AB to index it's content ?

One week later, I'm still hoping (praying ?) for a solution...

Find palette doesn't find the IPCT category field

I have all my pictures by categories and suplemental categories. The "find" tool doesn't find anything if for example I type ARC (architecture), no matter if I select containing, containing all, starting or all metadata, all, etc... It seems that it doesn't search in some IPCT fields, at least in the category and suplemental category.

You are right. "find" will find IPTC entries in caption, say, but not in category. I guess it's like EXIF, where it's only make, model, serial number, artist, and software.
- Pierre

The "Search" function box doesn't find things that are there! Why?!

The "Search" function box doesn't find things that are there! Why? Eg: It doesnt show all my Sent and Received emails, but it will find an email that I half wrote and deleted. Unsure why or how to explain more fully.
I also don't understand if I type in "James email" or "J" into the search box and all the J / James stuff appears but it doesn't show the emails I know have been sent and I know are somewhere because I rang "James" up to check, but the search box shows random thing I am NOT looking for, even if I type in fully what I am looking for and test it by typing in full titles of things.
It also doesn't store all my sent emails in "Sent" box. Confused! I'm not sure if the "Search" box just isn't up to the job or if it is broken / i'm doing something wrong? Maybe the email address I use isn't set up properly?

This can happen sometimes if the cache is not cleared correctly when items are not deleted from your device.
The only solution to this is to do a restore to clean out the cache file.

Satellite L855D doesn't find my CD/DVD drive

Hello!
I don't know what has happened to my computer but it doesn't find CD/DVD drive anymore.
I guess I may have deleted some necessary drive but not on purpose anyway.
Is there any way to recover it?
I have tried RmvFltrs which I found from some Toshiba's tech support site via Google search but it didn't help.
It stated that it worked but my computer tells me the installation couldn't be done.
I'm not in a desperate need of the drive to work, I'm just wondering whether it is possible to make it work somehow. So if someone could help me with this I'd be more than glad.
Sincerely,
Joonas

I mean that it isn't shown in "My Computer" anymore or if I try to install something from a CD it doesn't work since the drive doesn't work.
I can find it from device manager yes but it gives me this "code 52" and says the digital signature cannot be verified. There's this yellow triangle with an exclamation point in it too. Does this help at all?

TS3276 The Finder doesn't find ~/Library/Mail, or even "library". I need to do some experimenting to get my mail back and want to back up but can't even find a file with my messages in it.

Trying to save my email prior to a wave of experimentation to get email working again but finder doesn't find "library". Has the library been omitted from Mountain Lion?

Go to your Finder "Go" menu hold the option key to choose "Library".
After that you can drag it to your sidebar for easy access.

Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command S, I get a looping "cannot mount errno = 19" message.

Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command + S, I get a looping "cannot mount errno = 19" message.
Problem started when I used Tech Tool Pro 6 to "de-fragment volume". Had to cancel that process before it finished because I ran out of time. Thereafter, when I startup my machine normally, I get the gray Apple logo at first, but it changes to a prohibited symbol (circle with a slash thru it) and hangs.
When I startup holding the Option key, I can see my internal drive, but I get the same results as above.
When I startup using the MacBook OSX Install DVD, it does not find my internal drive as possible destination.
When I startup using the MacBook OSX Install DVD and then run Disk Utility, it finds my drive, allows me to "repair" and says everything is fine.
When I startup with Command + S, I get a looping error message "errno = 19" and cannot stop it to do anything else.
When I startup from Disk Warrior v4.4, it does not find my internal drive to do any repairs.
When I startup from Tech Tool Pro 6 and run the "computer check" diagnostics, everything passes but the Volume Structure, which fails at "Volume Extents (B-tree)." When I use TTP's "Tools" option to run "volume repair" it will show my internal drive and allow me to click the GO button, but nothing happens and nothing changes.
I have a Time Machine backup on an external USB drive, but for as long as the internal drive doesn't mount, I can't use the backup to restore.

It's a false report and should be ignored.
I would not rely on TT as I've already said earlier even before Grant posted similar advice.
I really think the Rigid Disk Block may be corrupted. This holds the partition map and could prevent a volume from being unmounted. Unfortunately, there is no way to fix that without repartitioning the drive which will remove everything. So, before going down this road I hope you have backups or can make a backup.
Drive Partition and Format
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Proceed with reinstalling OS X.
5. Download and install Mac OS X 10.6.8 Update Combo v1.1.

I have an issue with time machine, it doesn't find the Lacie external driver it use to use. it is the same drive that I usaly use for time machine back ups. It is corectly plugged. What can I do ?

Hi,
I'm trying to back up my macbook with time machine on the Lacie external driver I usualy use for this, but today my computer doesn't find the driver. I haven't done back up in 6 month.
Today, the Lacie driver is pluged and running, but the computer just does'nt find it.
what shall I do ?

Some things to consider:
Is the drive mounted, i.e., visible via Finder and/or on the Desktop?
Is the drive still selected in System Preferences, Time Machine? If not, use the "Select Disk" button.
Is Time Machine still turned on (System Preferences, Time Machine)?
Can you see the drive (and mount it) using Disk Utility (in your Utilities folder)?
charlie

I recently lost my iPod and ive been using find my iPhone to send messages to it, my email instantly tells me that it had been displayed or it suonded off however it doesn't find it's current location. you guys think this app actually works??

i recently lost my 3rd Gen iPod and ive been using find my iPhone to send messages to it, my email then instantly tells me that it had been displayed or it suonded off however it doesn't find the iPod's current location. you guys think this app actually works? i feel like my alerts are just bouncing back at me. please help. Thanks!

... AFAIC Location Services is a joke.
With both devices sitting side by side on my kitchen table, Location Services has NEVER shown the devices to be any where close to each other, and at times Location Services has been as much as a 1/4 of a mile off between the two devices.
Your iPod Touch has no GPS receiver so determining its location relies upon wireless routers whose location is known. Its "location" is actually that of a wireless router. Your iPhone 4 can use GPS, cellular triangulation, and Wi-Fi. One would think GPS would be most accurate but urban areas have a greater density of cells and GPS signals are easily obstructed so cellular triangulation is often more accurate.
Therefore the two devices' locations can be expected to be different. Differences of a quarter mile are easily explained if you understand how location services works: http://support.apple.com/kb/HT1975
Skyhook Wireless (I think Apple uses its own database now): http://www.skyhookwireless.com/howitworks/
Location Services is not a "joke"; its intended use is for basic navigation and for such applications as determining where the nearest restaurant is. It cannot tell you that your iPod is under the couch cushions and that your iPhone is in the car.

HT4889 Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive, it is constantly saying that it is "looking for other computers". It doesn't find the external drive. Why is it looking for other computers?

I'm trying to use Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive. I told it to look for a drive, yet it is constantly saying that it is "looking for other computers". It doesn't find the external drive ... it just endlessly looks for other computers. Why is it looking for other computers at all, when I told it not to?

Wow, the wording in Migration Assistant is misleading. I've never used it before, so I thought I would try to copy my files from the external drive ... my old iMac died, but I managed to get everything I need off it, using the 'cp' command in single-user mode. So I guess I'll just have to manually copy the files from the external drive to the new machine. I was hoping that Migration Assistant might help somehow, but obviously not.
Thanks for the quick reply!

N82: Nokia Software Update doesn't find the phone

Hello, I am trying to update the firmware of my Nokia N82, but I get an error message from Nokia Software Updater saying that it doesn't find the phone. I find that strange as Nokia PC Suite indeed finds the phone. The icon on the taskbar says that "AndersMobil is connected".
I've noticed that if I let Nokia PC Suite run at the same time as Nokia Software Updater, this icon shows that the phone is being connected and disconnected several times while Nokia Software Updater tries to find the phone, something that might indicate that the two programs cannot be run at the same time? I tried to run Nokia Software Update alone, but still the program doesn't find the phone.
In Windows Hardware Manager (or Units manager, not sure of the english translation) of Windows XP, "Nokia GSM Phone USB Modem" gives the following error message: "The unit is not working as it should as Windows cannot load the necessary drivers for this unit (Code 31)." Under "Portable Devices" in Hardware Manager/(or Units manager?) the error message "This unit cannot start. (Code 10)" appears for the unit "AndersMobil".
I followed the guidelines on the internet reinstalling Nokia PC Suite and Nokia Software Updater, removing and reinstalling the drivers, but Nokia Software Update still doesn't find the phone, and the same error messages appears in Hardware/Units manager every time.
What do I do?
Regards,
Anders
By the way, I sent an e-mail to Nokia support about this but they still haven't answered although it's been a long time since.
Moderator note: translation removed.
Message Edited by sphere_s on 18-Feb-2008 06:53 AM

See also my post "N82: Remove memory card and click OK" at /discussions/board/message?board.id=smartphones&message.id=79797#M79797
I don't know if that problem might be interconnected with the other in some way or not.
Kind regards,
Anders

My Itunes account tells me i need to update it to version 10.6.1, but when I click download and the computer (mac 2007) goes to the "checking for softwares" page it doesn't find the update?

my Itunes account tells me i need to update it to version 10.6.1, but when I click download and the computer (mac 2007) goes to the "checking for softwares" page it doesn't find the update? Help me please, what do I do?

Try updating to 10.6.3.25.
A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3

WLP 4.0 doesn't find WLS 6.1

Similar Messages

Maybe you are looking for