WLS5.1 - How to configure WLS5.1 to release "unclosed" connections?

          Hi all,
          is there any feature or detector element in WLS5.1 to release connections back
          to the pool if they were not closed properly by the application? If not, is there
          any alternative to overcome the problem?
          Please advice! Thanks!
          Best Regards,
          Winnie

          "Winnie Ngiam" <[email protected]> wrote:
          >
          >Hi all,
          >
          >is there any feature or detector element in WLS5.1 to release connections
          >back
          >to the pool if they were not closed properly by the application? If not,
          >is there
          >any alternative to overcome the problem?
          >
          >Please advice! Thanks!
          >
          >Best Regards,
          >Winnie
          Hi WInnie,
          you can set timeouts for releasing the connection pool if the connection
          is not properly closed by using
          the following way for a T3CLient like :
          t3.setSoftDisconnectTimeoutMins(2);
          for further calrifications let me know.
          http://www.weblogic.com/docs51/classdocs/API_jdbct3.html#startupconnpool
          rgds
          SureshKumar

Similar Messages

How to configure Rails database.ympl to connect to Oracle XE DB on Windows

How to configure database.yml file in a Rails application to be able to connect to Oracle XE DB?
I'm on Windows XP, Ruby 1.86, Rails 2.3.2. with oracle adapter.
When I tried
development:
adapter: oracle
encoding: utf8
database: localhost:1521/incentives,
host: localhost
pool: 5
username: SYSTEM
password: adminI got the below error (sorry for the stack trace traduction from French):
rake aborted!
ORA-12514: TNS : listening process doesn't know the required service in the connection description
rake aborted!
Invalid escape character syntax: /C:\Documents and Settings\myusername\My Documents\rails projects\myrailsproject\Rakefile/
c:/ruby/lib/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:2058:in `standard_exception_handling': Invalid escape character syntax: /C:\Documents and Settings\myusername\My Documents\rails projects\myrailsproject\Rakefile/ (RegexpError)
        from c:/ruby/lib/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:2058:in `find'
        from c:/ruby/lib/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:2058:in `each'
        from c:/ruby/lib/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:2058:in `find'
        from c:/ruby/lib/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:2058:in `standard_exception_handling'
        from c:/ruby/lib/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:1974:in `run'
        from c:/ruby/lib/ruby/gems/1.8/gems/rake-0.8.4/bin/rake:31
        from C:/ruby/bin/rake:19:in `load'
        from C:/ruby/bin/rake:19

database: localhost:1521/incentives,I don't know your environment, but the error seems quite clear... should that trailing comma be there ?

How to configure OAE for release?

What is the best practice for configuring OAE/HTML-DB for release to production? A number of thinggs are different on the prod machine than on the dev, namely the ldap host url used for authentication and authorization, and dblink to data storage that is outside the HTML-DB workspace schema. When we export/import the workspace/application, all the info is in the script. But we want to avoid manually editing the scripts, because the parameters on prod don't change.What is a good way of separating application logic from configuration parameters?

I would put all the variable things in a "parameter/config table" and pick them up in a "On Load - once per session" application process.
This way the table on dev and prod can contain different parameters appropriate for that environment and your application has no "hard coding".

How to configure ASA to allow activesync connections ?

To allow Activesync connections (between smartphones and an internal Exchange server) thru an ASA, I think about 3 or 4 potential solutions :
1) do a NAT on the Exchange server and allow activesync TCP connections from any IP to the Exchange server : I tested that and this works, but it is not the most secure solution we can imagine;
2) use a Clienless VPN SSL ASA configuration : I tried it, but got problems certaintly related to the fact that the Activesync client, installed on my Android/Samsung smartphone, does not seem to be able vto pass properly thru the ASA Portal to reach the Exchange server;
3) use an Anyconnect VPN ASA configuration : I tried it , but did not manage to install or use any of the Samsung Anyconnect client available on Android Market; by the way, I saw, in the Anyconnect VPN Client Admin Guide 2.4, that an ActiveSync MSI is available from CISCO (
anyconnect-wince-ARMv4I-activesync-AnyConnectRelease_Number-k9.msi), but I don't see any details about how it is supposed to be used except that it is for Windows environment only, so, not for an Android phone, but I have Windows Mobile smartphones to integrate too, so, maybe it can help me in this case ;
4) if Clientless nor Anyconnect solutions can't work, it might be better to use the ASA Cut-Through proxy function to get a more secure solution than the first one listed above; but I was not successful either with this cut-through proxy function
Any ideas or examples about how to allow activesync connections thru ASA would be welcomed
thanks in advance

Hi,
Generally ASA with CSC will support HTTP,FTP,SMTP,POP3 Scaning and Filtering.
From version ASA IOS 8.4.2 and CSC 6.6.1125.0, it will support HTTPS filtering also.
But here one limitation is that Https filtering will not support earlier versions of internet explorer 9, i.e if you want HTTPS filtering you must use Internet explorer 9 or after versions( As you know that Windows XP machines won't support internet explorer 9). But with firefox HTTPS filtering will support from versions 4.
For your reference use below 8.4.2 release guide
http://www.cisco.com/en/US/docs/security/asa/asa84/release/notes/asarn84.html
Release notes for CSC version 6.6.1125
http://www.cisco.com/en/US/docs/security/csc/csc66/release/notes/cscrn66.pdf
Basic configuration of the CSC
http://www.cisco.com/en/US/docs/security/csc/csc6.1.1569.0/administration/guide/cscappa.pdf
Sending traffic to the CSC module (using ASDM and CLI)
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808dea62.shtml
The troubleshooting guide:
http://www.cisco.com/en/US/docs/security/csc/csc63/administration/guide/csc8.html#wp1147829
Hope this will help you...
Do rate help ful posts..
Regards,
Janardhan

How to configure sap maxdb client to connect to SAP ERP system (SAP HR)

Hello all,
I am currently installing live cache for SAP ERP HR application(Idoc), can anybody tell me the sequence to proceed to configure SAP livecache with SAP ERP system. i am doing following steps
1. Install SAP DB using installation MAXDB CDs
2. Install SAP Livecache and standalone server SCM 5.0 using SAP ERP master and Livecache dvds.
3. install Livecache client fromSAP ERP master and livecache dvds between SAP ERP and livecache server.
4. configure in LC10, tcode.
but when i press on livecache monitoring in LC10 it gives me following error.
Command: DBMRFC
Parameter: -gsapfive -xsapgw00
SY-SUBRC: 8
Return Code
sap maxdb client

i tried the said things and after that i am getting following error in DB59, first three steps are successful but 4 one is failing.
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: <hostname>_<SID>_00                           ( Windows NT )
1. Connect. test with "dbmcli db_state"                         Successful
2. Connect. test with command mode "dbmrfc db_state"            Successful
3. Connect. test with session mode "dbmrfc db_state"            Successful
4. Connect. test with "native SQL" ( LCA )                     No connection
   SQL Code: 4008
    POS(1) Unknown user name/password combination
   For detailed information, see the developer trace for work process:            1
please see trace from file dev_rfc and dev_w0 below
log for dev_rfc
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: MKUMAR (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
Log from dev_w0
A RFC 1485 CONVID 47150684i tried the said things and after that i am getting following error in DB59, first three steps are successfuk but 4 one is failing
trace from file dev_rfc is below
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: ABC (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
A RFC 1485 CONVID 47150684
A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: abc (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47149684, {FDB31AE0-D203-F1C0-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M *****************************************************************************
M *
M * LOCATION    SAP-Gateway on host <HOSTNAME> / sapgw00
M * ERROR       program IDOCTEST not registered
M *
M * TIME        Fri Jan 07 18:15:25 2011
M * RELEASE     701
M * COMPONENT   SAP-Gateway
M * VERSION     2
M * RC          679
M * MODULE      gwr3cpic.c
M * LINE        1778
M * DETAIL      TP IDOCTEST not registered
M * COUNTER     715
M *
M *****************************************************************************
M
A RFC 1485 CONVID 47152747
A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: ABC (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47151731, {FDB31AE0-D203-F1C1-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Mani

How to configure an always on pppoe connection

Hi all..This is my first post here...I had a pppoe internet connection that was working with "sudo pppoe-start " command flawlessly. Later I have entered my username and password (pppoe) in my modem , so that I can use it as an "always on" type connection. Now how can I remove my earlier pppoe-setup files and configure my system to connect with internet ? ( mine is a usb-modem).. I have tried "Beginner's Guide section" of Arch Linux and entered static ip ,dns and default gateway. Nothing happens so I tried to make "network.service" file and start network service via systemctl method. Sadly none of these methods are not connecting with my internet. Ping also shown as unknown host.. I don't know how to fix this as I'm newbie in Arch Linux ! Could you please help me to connect my Arch system to internet ........ ( Pardon with my bad English )
Last edited by Jayasankar (2013-07-10 18:47:39)

Still working on it.
Created a translation pattern to call 9.
-> Create a new partition "9accessPT
-> Create a new CSS "9accessCSS"
-> Add the 9accessPT to 9accessCSS
-> Create a translation pattern, with a blank translation translation pattern and a called party transform mask "the number you want dialed" **********If i enter 9and a number, it automatically calls out, if i put only a 9 in the called party transform mask it does not.********
Urgent priority is checked.
-> Add the calling search space to the phone.
I'm thinking its not hitting a valid route pattern, since the 9 has already been dialed.
Still working on it.
Any ideas?
If you get it working, let me know.

How to configure RZ12 and SM59 ABAP connection settings when we have work with Load Balancing servers rather than a specific server .

Hi ,
If we have a specific server say 10.10.10.10 (abc.co.in) on which we are working, Then under RZ12 we make the following entry as :
LOGON GROUP          INSTANCE
parallel_generators        abc.co.in_10         ( Lets assume : The instance number is 10 )
Now in SM59 under ABAP Connections , I am giving the following technical settings:
TARGET HOST          abc.co.in
IP address                  10.10.10.10
Instance number          10
Now if we have a scenario of load balancing servers with following server details (with all servers on different instance numbers ) :
10.10.10.11
10.10.10.13
10.1010.10
10.10.10.15
In this case how can we make the RZ12 settings and SM59 settings such that we don't have to hardcode any IP Address.
If the request is redirected to 10.10.10.11 and not to 10.10.10.10 , in that case how will the settings be.
Regards,
SHUBHAM

Hi,
No one using FMS behind a load balancer? No one using RTMPT?

How to configure MDS9148 for 8Gig SAN Connection ?

Hi All,
I am very new to MDS switches (MDS9148 )-
DS-C9148D-8G16P-K9
And need help in configuring this switch in my DC environment. Any kind of help will be really appreciated. Attached is the topology diagram.
I am intending to get the 8Gig HBAs up and be able to talk to NetApp via the FC switch.

Hello Manas,
This is a major setup. I would recommend to contact support to assist you.

How to configure the combobox while using connecting throught the remote URL.

I am using the combobox in the server for the selection of process stages and is working fine.
Now I want to connect the combobox through the remote URL connection of my client system. So that it will be updated simultaneously in client and server.
While connecting through the remote URL it is giving the message the to enter the value property.
I am not able to understand what value is to be entered in this option.
Please advise the solution at the earliest.
Best Regards,
Naresh Saini

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

How to configure AnyConnect/ASA/Certificate/MS CA together

Hello
We are looking to apply mobile device management utilizing some third-party cloud solution. Mostly iPad users will connect to our internal network using AnyConnect thru ASA. Third party MDM will be used to control and provision ipads and i need to provide solution for AnyConnect VPN.
Looking for some guidance, docs, examples, white paper that will provide info how to configure the following:
users will connect to ASA VPN using AnyConnect; certificate issued by internal Microsoft CA and unique to each user will be used for authenticate the user. ACS will communicate with Microsoft AD to check if the user is valid AD user. Once authentication is done, user will have access to internal network.
I am struggling to get all those peace of puzzle togehter so i can work on solution.
I would appreciate if someone will give me some ideas how this whole scenario will work.
Thank you.

Anyone from experts out there? I am sure someone heave doen this before.

How to configure modem and connect internet and play mp3

Hello friends
I am using sun solaris 8 intel edition .
I am using windowsXP,RedHat Linux and Sun Solaris 8 Intel Editon. I am using Internet on windows and linux platform but i cannot find any device configure tool in solaris 8 , So Please tell me how to configure modem and commands for connection internet and It is possible to play mp3 songs on solaris
Thaking in Advance
Piyush Patel
PI Solution

Look at the manual for pppd. Also take a look at OSS for sound card support (http://www.opensound.com) and xmms for your MP3 audio (http://www.xmms.org)

How to configure Beehive after successful installed in Oracle 10gR2

I have successfully installed Beehive in Oracle 10gR2 with RHEL4, how to configure the email, calendar, content, rtc and other OCS services available in Beehive?

How to configure the actual services can be found in: http://download.oracle.com/docs/cd/E10534_01/bh.100/e10477/toc.htm
How to configure end user clients to connect to Beehive can be found in: http://download.oracle.com/docs/cd/E10534_01/bh.100/e12034/toc.htm
You might also want to take a look at the Concepts Guide (http://download.oracle.com/docs/cd/E10534_01/bh.100/e05393/toc.htm) to read about the new architecture and features in Beehive.

How to configure OracleXEClient

I have installed Oracle Express Edition (10.2.0.1) to test some work before delivering it to a customer. The customer wont let me use the thin JDBC driver, so I have to configure my OracleXEClient to set up appropriate tnsnames. However I can't find any wizard to configure the tnsnames nor can I find a tnsnames.ora file in my OracleXEClient installation.
Does anybody have some hints on how to configure the OracleXEClient for OCI connections.
Thanks,
Niels

No tnsnames for OracleXEClient

How to configure release procedure for rate contracts release

Dear all,
How to configure release procedure for rate contract following are the requirements
they are two release codes c1 & c2 <=100000,>=100000
                if c1 is not there c2 has to be approved
     Change in the value of the rate contract contract
     Change in the validity of the rate contract
     Addition of deletion of line items
While using a non u2013 released rate contract in the PO an error message should shoot out.
Also the logic should be changed while using the rate contract in the PO.
The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
It should be possible to refer existing valid rate contracts in purchase orders.
Regards,
bhaskar

Hi,
In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
class in standard is the same FRG_EKKO, you can use the same for contract.
To distinguish if it's a contract or PO, EKKO-BSART can be used.
For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
You can restrict the document type to set up the release strategy for only contract.
Of cause, you can also create your own release class Z* for contract copying standard
one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
OLME:
-> contract
->Release Procedure for Contracts
->Define Release Procedure for Contracts
->Release Groups
If you have already created the PO release class.
Assign a new chracteristic of Document Category -BSTYP
Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES

How to configure release strategy in case of document parking ?

Hi experts,
I have a requirement wherein i have to create a workflow with four level approval when a document is parked before it can be posted.
The approval is by company code,reacon code and the amount .For example for a particular reason code for particular amount one person has to approve,if the amount is greater then 2 people have to approve, so on.
Is it possible to configure such a release strategy in SPRO ?
Kindly help,
thanks in advance,
regards
Ashwin

If it are FI Invoice you're talking about, it's possible.
Do you have access to the best practices of Public sector management ? There's an example on how to implement an FI workflow.
If not, check workflows on the object FIPP

WLS5.1 - How to configure WLS5.1 to release "unclosed" connections?

Similar Messages

Maybe you are looking for