How to configure Beehive after successful installed in Oracle 10gR2

I have successfully installed Beehive in Oracle 10gR2 with RHEL4, how to configure the email, calendar, content, rtc and other OCS services available in Beehive?

How to configure the actual services can be found in: http://download.oracle.com/docs/cd/E10534_01/bh.100/e10477/toc.htm
How to configure end user clients to connect to Beehive can be found in: http://download.oracle.com/docs/cd/E10534_01/bh.100/e12034/toc.htm
You might also want to take a look at the Concepts Guide (http://download.oracle.com/docs/cd/E10534_01/bh.100/e05393/toc.htm) to read about the new architecture and features in Beehive.

Similar Messages

After successful install, all my adobe cc docs, when open, change pointer arrow, i-beam and window to oversize. When doc closes all return to normal size. I'm on a PC. Screen res set to medium 1920x1200. Any ideas how to fix?

After successful install, all my adobe cc docs, when open, change pointer arrow, i-beam and window elements to oversize. When doc closes all return to normal size. I'm on a PC. Screen res set to medium 1920x1200. Any ideas how to fix?

Ok thanks Linxup I would recommend posting in the respective forums for each of those software titles as opposed to the Creative Cloud Download & Install forum. The relevant forums are as follows:
InDesign - InDesign
Illustrator - Illustrator

After successfully installing premiere&elements 12, both programs abort after signing in. Fix pls?

After successfully installing premiere&elements 12, both programs abort after signing in with correct login & password. How can I fix it?

Moving this discussion to the Photoshop Elements forum.
M.Angela are you able to log into http://www.adobe.com/ successfully? Also which operating system are you using?

Hi, download of the trial product (photoshop ele 13) does nt start even after successfully installing the Adobe download assistant successfully. Only .7z file is shown, .exe is nt available. Whn i try to extract .7z file wd 7-Zip error pops up " cannot ex

Hi, download of the trial product (photoshop ele 13) does nt start even after successfully installing the Adobe download assistant successfully. Only .7z file is shown, .exe file is nt visible. Whn i try to extract .7z file wd 7-Zip error pops up " cannot extract **.7z as archive" .I've tried fresh download of adobe photoshop ele 13 but same error occurs.
OS:Windows 8.1
Storage loc for adobe down assistant : C-Program file(x86)-Adobe download assistant-adobe
Storage loc for adobe down assistant: C- Adobe photoshop assistant 13- PhotoshopElements_13_LS25_win64_1. 7z
After this I try to extract ** .7z file but following error occurs :
After this I try to extract ** .7z file but following error occurs
Kindly Help.

Thanks fr revert !
After clicking on the provided link , Above error pops up. I clicked "ok" n allowed download to complete after which same previous error shows up!

How to configure portal server with the Backend Oracle database

Hi Portal Experts,
we are planning to install Netweaver 04s sp stack 9 full java edition with Oracle 8i on windows platform.
we have the installation docs of portal but we didn't have any idea about how to configure Portal server with the Backend Oracle database at the time of installation or after ost installation of portal.can anyone provide the documentation about this or guide me how to achieve this.
PLZ share ur views---your help would be highly appreciable.
Regds
Phani.

HI
if you r working in Sap enterprise portal use for connection url
jdbc:sap:sqlserver://ilsql01.tlv.sap.corp:1433;DatabaseName=Northwind
ilsql01.tlv.sap.corp:1433 this is your portal url with port number
Northwind is your database name.
for dirver you need to give
com.sap.portals.jdbc.sqlserver.SQLServerDriver
in case if you r working on other than sap say windows along with oracle try to use
Connection URL as jdbc:oracle:<drivertype>:@<database>
Driver name as oracle.jdbc.driver.OracleDriver
ex jdbc:oracle:thick:@localhost:3036:mydb
Oracle implements two types of JDBC drivers:
Thick JDBC drivers built on top of the C-based Net8 client, as well as a Thin (Pure Java) JDBC driver to support downloadable applets. Oracle JDBC drivers are used to create JDBC applications to communicate with Oracle databases.
Oracle extensions to JDBC include the following features:
Data access and manipulation
LOB access and manipulation
Oracle object type mapping
Object reference access and manipulation
Array access and manipulation
Application performance enhancement
*************if the information is helpful to you please reward points************

After successful install, I am unable to use RoboHelp 7 because of constant refresh of file lists

RoboHELP 7 installed on Windows XP
Our enterprise support team installed RH7 on my new laptop via our corporate intranet. I received an e-mail message reporting that the install failed so I contacted the support team, someone logged on to my machine by remote and did an uninstall of RH7. Then, the install was done again and the same failure message was received. Then, RH was uninstalled and the install was attempted for the third time. Again, I received the failure message. I had noticed that after each install the icons appeared on my desktop. So, after this third install, I went ahead and clicked the RH7 HTML icon and the program seemed to start properly. I have a key number from our enterprise team and I entered the key number to complete the registration. The UI appeared and I selected my recent project. RH built the file lists that I expected to see in the left panes of the interface but the file lists kept "twitching" and the cursor kept changing to the hourglass and back. This happened about once every two or three seconds and I could not move my cursor fast enough to select a file.
One of my co-workers suggested that I uninstall RH7 myself, check the registry and erase any robohelp entries. I know this is risky but I am confident I can do it. However, I would like to hear from any RH experts about how to solve this "twitching" problem, if there are other possible solutions. Thanks.

My gut feel is that if your organisation is large enough to have an Enterprise license, IT would not take too kindly to you uninstalling the product yourself and editing the registry. That's your issue though.
If they are happy, then you could try www.revouninstaller.com with which a number of people have reported good results if you use the stronger options to clear the registry. Again at your risk and responsibility.
You might also like to look at http://www.adobe.com/devnet/robohelp/articles/before_install.html. It includes the script IT should be using. Maybe that should be checked as well.
The other approach is to get them to do a direct install. Worth trying given the issues you are having.
See www.grainge.org for RoboHelp and Authoring tips

Can't open Logic 8 after successful install?

Hey,
For some reason, after I successfully install Logic 8 onto my MacBook Pro, I cannot find the software anywhere on my computer, not even in applications. Need help locating the program and running it. Thanks for your time.

Hey...thanks for taking the time to send the link but my problem is not based on the different scenarios from the link. Here are my specifics. All apps up to date, mac meets all requirements. I installed Logic 8 from box set. Went through all the CDs as the installer requested them. When the install was over no icons on my tray at bottom of desktop, no icons in the applications folder. I did see that my hard drive is about 50gb smaller than when I started. I can't uninstall abnything because there are no icons to remove from the application folder. I can't even locate any folders other than the folders created for all the jampack and audio file.
When I put the install cd back in the installer sees that logic has been installed and stays grayed out and I can't select it to reinstall it. I have checked every folder I can think of looking for the folder containing all the software for Logic but it is nowhere to be found.
Its as if logic is in limbo on my machine. It isn't visible to me but is taking up space and can't be removed cause it can't be seen.

Missing Plug ins after successful install

In Design is missing plugins after what seems like a successful install. Other Downloads are OK ( Photoshop Lightroom ) I've tried uninstalling and re-installing sevaral times same outcome....Fisrt looks for JBX then others. Will launch but missing tolls and other things from the programe.
MacBook Pro. OSX 10.9.2
This happened after I installed a new SSD with the existing Harddrive wiped and used for data. Everything esle working fine.

Please continue this thread at http://forums.adobe.com/message/6320865.

J6480 stops printing on wireless after successful install

I have a J6480 installed on our wireless network at home. 3 PCs are sharing it a). Dell XPS desktop XP SP3, b). Dell Studio 15 Windows 7, c). Dell Inspiron 15r Windows 7. I downloaded the latest J6480 software package, with drivers for the Studio laptop and installed it. We never have any printing problems with the desktop running XP. However, the Studio laptop went through a successful install of the latest J6480 software package and drivers about 6 months ago. After the install, all test pages and subsequent printing worked fine for a period of time but one day when I sent a print to it, it just sat in the print queue and wouldn't print. Power down/up on the printer, etc - no printing. Prints from the XP system worked fine. I removed the printer from "devices and printers" on my laptop and went through the "find a network/wireless printer" process. It found the printer twice (under two different names but same IP, which is very curious), and I selected one, completed the install process, and was on my way with printing again. I go through this process about once a month. I've even gone through deleting all entries for the printer in the registry (saw that as a recommended solution in a blog somewhere) - problems still persists as described.
I got my wife the Inspiron 15r for Xmas and downloaded/installed the latest J6480 software package with drivers on her laptop. Everything has worked flawlessly these past 3 weeks. Starting today however, she is running into the exact same problem as I described above with my laptop.
I have run the HP printer diagnostic utility numerous times. It tells me I have a print stuck in the print queue (I knew that...) and removes it. It then tells me to power down the PC and the printer, power them both back on and try again. After doing that, the utility starts back up and says it "made some changes" and everything looks fine. However, when I print a test page - nothing prints. Remove the printer - rediscover and reinstall - print works fine.
Obviously, I can't keep deleting the printer and reinstalling it. Any ideas or suggestions would be greatly appreciated.

I have this same problem. In a way it is good to know that I am not the only one. Have you found a solution?

At a total loss on how to fix PSCS6 after CSCC Install

I am assuming that the CC version of Photoshop had something to do with this as it started just after the install and they are both doing this.
The very next image I edited after the install was gif_01.gif. I saved it to: project/005885/site/image/gif_01.gif.
Soon I started working on another graphic and went to save it, say.... desktop\graphic.jpg
The warning box pops up, Warning, saving this image will overwrite the image gif_01.gif do you want to continue.
Now, everytime I save a jpeg it has this message. No other images do it, except of course gif_01.gif if in that folder.
Not a huge deal except for it is having a bit of a water board effect and is starting to feel like someone died every time it pops.
Shift+Ctrl+Alt+DBLClick = Reseting up my whole work environment and still having the gif issue. Oh ya, another issue with it is every time I save a jpeg to any file it also save that gif image to the file. It is an 1800x2400 pixel image so it will really suck to have a few thousand extra on the drives.
Any clues would be great. I hate to uninstall and reinstall as I am software heavy on this machine and it is used for many tasks. Sometime reinstalling a single program turns into setting the machine back up and it is a 3 day process.
Windows 8 Enterprise
CS6 - All Apps +(
MS Visual Studio Ultimate
Netbeans
Eclipse
MS Office Professional 2013 +Skype +Sharepoint Builder +Forms Tools
Core FTP
PUTTY (3 app pack)
Windows Defender
Spybot (dormat-manual scans and immunizations)
Windows Firewall
Everything file searcing app
Skype
Custom Apps (In House, Air Apps)
All of the internet browsers (at least the most popular dozen or so)
Mobile simulator, graphics pad software, video capture etc. Several more apps but none that should effect this)
AMD 8 Core
2xGTX 570 (Quadro 6K soon)
64gb Ram
SSD eSata III 512gb x 4 in Raid 10
1200watt PSU
Also, I have cleared as many of the temp files and etc. I use 2 256gb SSD eSata II disks for scratch and temp files for CS6 with a 300GB HDD for video
Every program system wide and all drivers are 100% up to date with the latest versions.
Also, I just realized it only does it when Save for the WEB is chosen and not when Save As and then JPEG is picked.

I would hazard a guess you copied your plugins from cs6 to the cc installation which is not recommended!
Don't think the advice to reformat and reinstall is the best way and don't know why it was suggested!

How to configure what is displayed in srfDocSnippet (Oracle Text Search)?

I am using UCM 10gR3 with SiteStudio 10gR4. I installed the Oracle Text Search component and it is working well. One of the requirements for a search results page is the specific layout of the data displayed. srfDocSnippet returns a really ugly display if the search result return is just metadata. I didn't find any documentation in UCM on how to configure this display.
How to you configure what is displayed in srfDocSnippet?
Thank you,
Ken

How To get the Summary from CIS on Document Objects (Doc ID 837740.1)
What is the Closest Equivalant toVdksummary option In Oracle Full Text Search (Doc ID 787173.1)
those notes on MOS may help.

Database Configuration Assistant fails during instalation of Oracle EE 8.1.7

My machine runs RH 6.2 and I have tried to install it Oracle. After executing all pre-instalation steps, I run ./runInstall and instalation process goes on. I select Typical Instalation and instalation proceeds until 100%, when OUI tries to configure Net 8 Assistant and Database Configuration Assistant. Both applications fail in this phase. Unfortunately, OUI shows a message (Database Configuration Assistant) informing that /u01/.../JRE/bin/jre does not exist. However, I have installed JDK 118 and JRE link seems correct, so that I can access JDK directory throught JRE link.
HELP, HELP!!!
Cheers,
Andre

some good installation guides to check out:
http://www.akadia.com/services/ora_linux_install_901.html
http://www.e-gineer.com/instructions/install-oracle9i-on-linux.phtml
good luck!
Jenny

Adobe Flash Player uninstalls itself after successful install/thenreboot in Windows Vista, IE 64 Bit

Cannot reinstall. IT is not installed anywhere on the machine. How can I install it again and resolve the issue quickly?

Hi, You can read this Revised Troubleshooting Guide to make sure you have followed the correct procedures. Be sure to read it all, since it is not written to follow as Step1, etc. Some information that you may need could be listed over half way down.
http://kb2.adobe.com/cps/191/tn_19166.html
Make sure you are the Administrator and use that Account. Also be aware that your Anti-Virus may block the Install.
After you read that and then Uninstall, then I would suggest using the Manual Installer(s) which are listed in the Guide.
Thanks,
eidnolb
Message was edited by: eidnolb adding link

After successfully installing Acrobat 7 in Windows 8.1 it fails to launch.

I had Acrobat 6.0 Professional, running in Windows XP. After moving to Windows 8.1 I tried to install from the original disk. Windows warned me that it had problems, and couldn't start the program, suggesting that I contact Acrobat, which I did. After a chat with Acrobat, I got a download of Acrobat 7, replacing 6 with the new serial number. I installed 7. The installation was successful and an icon was placed on my desktop. Clicking on theicon, doesn't launch the program.

Hi George ,
Acrobat 7 is not supported on Windows 8/8.1
Hence, We would recommend you to update your Acrobat version.i.e Acrobat 11.0.10.
Regards
Sukrit Dhingra

Lightroom 5.2 won't open after "successfully installed" - can anybody please help me understand why?

Hi everyone
I've bought and downloaded Adobe Lightroom 5 for a new iMac 27" intel core 5 3,4 GHz. The machine is only three days old and no more updates are to be found when searching for it. However; after the message that "lightroom 5 has successfully been installed" I don't get to open the program. So I never get to the point where I can register the serial number / registration key for purchased product.
I've followed the instructions that comes with Lightroom 5, but no luck. Also tried to uninstall and reinstall.
No secret that I'm total incompetent when it comes to understanding of computers and software....
Hope someone can help me understand what I'm doing wrong, and sugest some good solutions :-)
Thx

I think you may need to uninstall and then start over. There is no installer on the Mac for Lightroom so select it in Applications and send it to the trash. I suggest you download again from a different source. You can use the link below to download the free trial and then validate the software after installation with your product serial number. Ensure you choose your language version and MAC platform from the dropdown list at the top of the page.
After you click download it starts by downloading or updating (replace) the Adobe Download Assistant. You then browse the products and select Photoshop Lightroom 5 to start the installation.
https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom&promoid&promoid=D TEML

How to configure Beehive after successful installed in Oracle 10gR2

Similar Messages

Maybe you are looking for