WLS9.2 to WL10.3.2 service fails: Unable to invoke Annotation processoror

Hello,
We have a spring based webservice which is currently deployed on an OSB 2.6.1 cluster and is working there without problems.
Since we are upgrading to OSB 10.3.1 and we want to divide OSB functionality from supporting webservices, we are trying to move the webservice to a WLS 10.3.2 cluster.
We removed the WLHttpTransport annotation and rebuild the complete webservice (using existing ant scripts) against the new WLS.
When we try to deploy the application we get the error at the end of this message. I've searched the internet, but have not yet been able to find a cause. We have already deployed other webservices without problems. These webservices do not use spring, so I assume springs annotations are related to the problem. My main problem is that I do not have much spring knowledge :(. (The code has been build by a contractor which is no longer available).
I have however been able to deploy another spring application (after adding jstl.jar) in WLS 10.3.2 without problems.
Does anybody have a clue why this is failing ?
Caused by: weblogic.utils.compiler.ToolFailureException: Unable to invoke Annotation processoror
at weblogic.application.compiler.FlowDriver.handleStateChangeException(FlowDriver.java:53)
at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:37)
at weblogic.application.compiler.FlowDriver$CompilerFlowDriver.compile(FlowDriver.java:96)
at weblogic.application.compiler.AppMerge.runBody(AppMerge.java:157)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:115)
at weblogic.application.compiler.AppMerge.merge(AppMerge.java:169)
... 95 more
Caused by: java.lang.AssertionError: Unable to invoke Annotation processoror
at weblogic.application.compiler.WSEEModuleHelper.processAnnotations(WSEEModuleHelper.java:228)
at weblogic.application.compiler.WSEEModuleHelper.processAnnotationsWithServiceLinks(WSEEModuleHelper.java:172)
at weblogic.application.compiler.WSEEModuleHelper.processAnnotations(WSEEModuleHelper.java:146)
at weblogic.application.compiler.WARModule.processAnnotations(WARModule.java:461)
at weblogic.application.compiler.EARModule.processAnnotations(EARModule.java:227)
at weblogic.application.compiler.WARModule.merge(WARModule.java:492)
at weblogic.application.compiler.flow.MergeModuleFlow.compile(MergeModuleFlow.java:23)
at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
at weblogic.application.compiler.FlowDriver$CompilerFlowDriver.compile(FlowDriver.java:96)
at weblogic.application.compiler.ReadOnlyEarMerger.merge(ReadOnlyEarMerger.java:49)
at weblogic.application.compiler.flow.AppMergerFlow.mergeInput(AppMergerFlow.java:88)
at weblogic.application.compiler.flow.AppMergerFlow.compile(AppMergerFlow.java:41)
at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
... 100 more
>

We had the original external developer help us solve the problem. If I remember correctly the cause lay in autogenerating the database schedule for some Spring related stuff (I do not have real spring knowledge). Once generation for this was disabled, so it assumed the DB to be correct, it worked.
Regards,
Wim Veldhuis
PharmaPartners BV

Similar Messages

  • Offline Servicing Failed - Unable to delete existing mount directory

    Hi All,
    I'm unable to run offline servicing on my install image, as the deletion of a previous mount point fails (from OfflineServicingMgr.log):
    Deleting file \\?\C:\ConfigMgr_OfflineImageServicing\GRO000E7\ImageMountDir\Windows\Fonts\trebucbi.ttf, FAILED, Win32 Error = 1168
    Failed to remove previously existing staging folder C:\ConfigMgr_OfflineImageServicing\GRO000E7, GLE = 1168
    Failed to remove the staging folder C:\ConfigMgr_OfflineImageServicing, GLE = 1168
    I've tried:
    DISM /cleanup-wim - returns all stale files removed, but the directory remains
    DISM /cleanup-mountpoints - returns all stale files removed, but the directory remains
    Manually deleting the folder - which returns the error 0x80070490 Element not found
    I presume I could work around this by deleting the existing image in SCCM, re-creating using the WIM, then it should have a different packageID and hence use a different mount point for offline servicing?
    I'd rather not do this, so if anyone has any ideas on something else to try, would be greatly appreciated.
    Thanks,
    Iain

    We had a similar problem, after the server had it's standard maintenance reboot, I was able to get the DISM /cleanup-wim to work. Then I was able to delete the folder. Don't know whether or not you've had a chance to reboot the server but that couldn't
    hurt to try if you're able to do that. Good luck.

  • I have a new iPad wi-fi lte 16gb.when I try to sync thru I tunes it keeps on accessing I tunes stores.i have windows xp service pack 3.after running diagnostics it showed iTunes secure connection failed.unable to sync completely even once. Plz help.thanks

    I have a new iPad wi-fi lte 16gb.when I try to sync thru I tunes it keeps on accessing I tunes stores.i have windows xp service pack 3.after running diagnostics it showed iTunes secure connection failed.unable to sync completely even once. Plz help.thanks

    I'd try the following document: 
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Unable to install itunes 7 due to error "Bonjour service failed to start, verify you have sufficient privileges" mcafee is not blocking it, please help anyone?

    I am unable to instal itunes (greater than version 7) as it gives me the error,"Bonjour service failed to start, verify you have sufficient privileges" , i have checked on apple support and the only help for this error says that mcafee antivirus is blocking the services however i have never had mcafee installed on my pc. Anyone any other ideas as to what could be wrong?

    Hi doywks,
    The Apple Mobile Device is a component of iTunes that communicates between your computer and your iPhone or iOS device.  The error message you are seeing "verify that you have sufficient privileges to start system services" has to do with the Windows operating system.  It's possible that you are not logged in as the administrator for your Windows PC.  Or, you may have antivirus software stopping the Apple Mobile Device from running.  
    If you are having issues updating iTunes on your PC, follow the steps in the article below.
    If you can't install or update iTunes for Windows - Apple Support
    https://support.apple.com/en-us/HT201668
    How to restart the Apple Mobile Device Service (AMDS) on Windows - Apple Support
    https://support.apple.com/en-us/HT203188
    I hope this information helps ....
    - Judy

  • Error deploy SOA application "Deployment Failed: Unable to register service

    Hi All
    I have build a SOA application and tried to build and deploy to my SOA server but stuck with below error msg.
    Step-1: Created the application, with BPEL components etc.
    Step-2: Right click on the application, then Deploy -> To -> My Server..
    Step-3: SOA build msg
    Buildfile: F:\PF\Oracle\Middleware\jdeveloper\bin\ant-sca-compile.xml
    BUILD SUCCESSFUL
    Total time: 5 seconds
    Step-4: Deployment msg
    +[03:09:24 PM] ---- Deployment started. ----+
    +[03:09:24 PM] Target platform is (Weblogic 10.3).+
    +[03:09:24 PM] Running dependency analysis...+
    +[03:09:24 PM] Building...+
    +[03:09:32 PM] Deploying profile...+
    +[03:09:32 PM] Wrote SAR file to F:\SSID\Oracle_WS\Clawback\CustomerSubscriptionStatusMonitor\deploy\sca_CustomerSubscriptionStatusMonitor_rev1.0.jar+
    +[03:09:32 PM] Deploying sca_CustomerSubscriptionStatusMonitor_rev1.0.jar to soa_server1 [9.184.173.34:8001]+
    +[03:09:32 PM] Processing sar=/F:/SSID/Oracle_WS/Clawback/CustomerSubscriptionStatusMonitor/deploy/sca_CustomerSubscriptionStatusMonitor_rev1.0.jar+
    +[03:09:32 PM] Adding sar file - F:\SSID\Oracle_WS\Clawback\CustomerSubscriptionStatusMonitor\deploy\sca_CustomerSubscriptionStatusMonitor_rev1.0.jar+
    +[03:09:32 PM] Preparing to send HTTP request for deployment+
    +[03:09:33 PM] Creating HTTP connection to host:9.184.173.34, port:8001+
    +[03:09:33 PM] Sending internal deployment descriptor+
    +[03:09:33 PM] Sending archive - sca_CustomerSubscriptionStatusMonitor_rev1.0.jar+
    +[03:09:53 PM] Received HTTP response from the server, response code=500+
    +[03:09:53 PM] Error deploying archive sca_CustomerSubscriptionStatusMonitor_rev1.0.jar to soa_server1 [9.184.173.34:8001]+
    +[03:09:53 PM] HTTP error code returned [500]+
    +[03:09:53 PM] Error message from server:+
    Error during composite deployment: oracle.fabric.common.FabricDeploymentException: oracle.fabric.common.FabricException: Deployment Failed: Unable to register service.: Deployment Failed: Unable to register service..
    +[03:09:53 PM] Check server log for more details.+
    +[03:09:53 PM] #### Deployment incomplete. ####+
    +[03:09:53 PM] Error deploying archive file:/F:/SSID/Oracle_WS/Clawback/CustomerSubscriptionStatusMonitor/deploy/sca_CustomerSubscriptionStatusMonitor_rev1.0.jar+
    +(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)+
    Also I have check the http://localhost:8001/soa-infra/ and it says*
    Welcome to the Oracle SOA Platform on WebLogic
    SOA Version: v11.1.1.0.0 - 11.1.1.1.0_090609.1407.5182 built on Tue Jun 09 15:06:41 PDT 2009
    WebLogic Server 10.3.1.0 Wed Jun 10 22:24:41 MDT 2009 1227385 (10.3.1.0)
    There are no composites deployed to the platform
    Edited by: user11263460 on Dec 13, 2009 2:39 AM

    If this still needed. Take a look in Your WSDL file - any references to schemas etc. Are they accessible on server? For example - XSD file have absolute file system link - change it to project level import (copy xsd file to project) or publish to MDS.

  • Deployment Failed: Unable to register service. 11g

    Hi ,
    i am using JDev version 11.1.1.3.0. While deploying a composite i got th efollowing error. can someone please let me know :
    Error during deployment
    oracle.fabric.common.FabricException: Deployment Failed: Unable to register service.
    at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:37)
    at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:359)
    at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:219)
    at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:161)
    at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:110)
    at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:98)
    at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:79)
    at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:153)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: oracle.fabric.common.FabricDeploymentException: Unable to register service. {rootCauses=[]}

    If this still needed. Take a look in Your WSDL file - any references to schemas etc. Are they accessible on server? For example - XSD file have absolute file system link - change it to project level import (copy xsd file to project) or publish to MDS.

  • Ink System Failure has failed unable to copy, receive faxes or print.

    ink system has failed .unable to copy receive fax or print error 0xc19a0005 please help

    Have you tried to reset the printer by removing the power plug from the wall outlet & waiting 60 seconds b4 plugging it back in?
    Normally this error requires servicing or replacement of the printer.
    Is the warranty period over?
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Windows Search Service failing to install on Windows Server 2008 R2 Terminal Server

    Hi,
    I am unable to install the Windows Search Service on a Server 2008 R2 Terminal Server. I want to install this to enable indexing options within Outlook 2013 for all users.
    Server Manager > Add Roles > File Services > Select only Windows Search Service > Install.
    The error I receive: "Attempt to configure Windows Search Service failed with error code 0x80070057. The parameter is incorrect."
    Thanks,
    Bjorn

    Hi,
    I did the test and could install the Windows Search Service without problem.
    Which role did you installed on the terminal server?
    Did you try to install it on another windows server?
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How do I prevent "The user profile service service failed the log on" error messages?

    I work for an organization with approximately 60 staff members across ~80 Windows 7 Professional PCs. Users log in with Active Directory accounts.
    Approximately once per month, a random user will get an error message while attempting to log into their machine that says "The user profile service service failed the log on."  The solution to resolve this issue is here: http://support.microsoft.com/kb/947215?ppud=4&wa=wsignin1.0.
    The problem is that I want to PREVENT this issue from happening, as it is incredibly inconvenient for the user. I had one staff member board a 5-hour plane trip expecting to do work, and once she got in the air she logged in and
    received the error message and was unable to use her computer for the trip. I've had others locked out of their computer with deadlines to get things done, while I am at home off the clock. Editing the registry is not an easy fix, and so it's not something
    I can just post instructions for in a knowledgebase article.
    Does anyone know how to prevent this issue from occurring? I believe that it has something to do with a network-based startup script, or a service trying to connect to our file server, or the computer trying to connect to our ad server. All of these
    are blocked by firewalls (unless the user is off-site), and I suspect that the services may be timing out, causing the user profile service service failed the logon error message, but I can't seem to eliminate it, after nearly a year of trying.
    90% of the time this problem occurs when the user is off-site, but it has happened while the user is in the office too. Once the user gets this error message, the only way to resolve the problem is to log into their computer as a localadministrator account
    and perform the method #1 fix in the knowledgebase article.
    Thanks

    Have you checked the logged files in event viewer around the time when problem occurred?
    Is there any suspicious events like error or warning related to this issue.
    Try run Active Directory Best Practice Analyzer:
    http://technet.microsoft.com/en-us/library/dd759260.aspx

  • Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database 1006.

    HI all,
    I ran into a problem with one of the servers in my DAG.  Due to a backup failure, the log partition filled up and the Exchange database went offline on this particular server.  The DAG continued to function on the other server.  So this particular
    DB01 had only some test accounts in it so I removed the database copy.  Unfortunately the removal must not have completed correctly. 
    After recovering the needed space in the partition, I tried to recopy the database and it failed.  So I deleted the entire database from the active server and it successfully removed it from the active server.  Now on both the servers the database
    is not showing, however I'm receiving the error below which indicates to me that the service still thinks the database exists.  I am also getting event 4113 Database redundancy health check failed for the database copy as it shows there is only one copy
    of the database (failed redundancy) but there should be zero copies.
    This database no longer exists in AD as I have verified this with ADSI so it must have something on the exchange server that is still telling the service the database exists. 
    Can you point me to the location to clean this up?
    Log Name:      Application
    Source:        MSExchange Mailbox Replication
    Date:          02/25/2011 2:00:07 PM
    Event ID:      1006
    Task Category: Service
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      email1.domain.com
    Description:
    The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
    Database: DB01
    Error: MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
    Diagnostic context:
        Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
        Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropLogon [254]
        Lid: 17082   ROP Error: 0x3EB    
        Lid: 26937 
        Lid: 21921   StoreEc: 0x3EB    
        Lid: 27962   ROP: ropExtendedError [250]
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 26426   ROP: ropLogon [254]
        Lid: 22086 
        Lid: 27206 
        Lid: 17990 
        Lid: 16966   StoreEc: 0x8004010F
        Lid: 31433   StoreEc: 0x8004010F
        Lid: 8620    StoreEc: 0x3EB    
        Lid: 1750    ---- Remote Context End ----
        Lid: 26849 
        Lid: 21817   ROP Failure: 0x3EB    
        Lid: 26297 
        Lid: 16585   StoreEc: 0x3EB    
        Lid: 32441 
        Lid: 1706    StoreEc: 0x3EB    
        Lid: 24761 
        Lid: 20665   StoreEc: 0x3EB    
        Lid: 25785 
        Lid: 29881   StoreEc: 0x3EB    
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchange Mailbox Replication" />
        <EventID Qualifiers="32772">1006</EventID>
        <Level>3</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2011-02-25T22:00:07.000000000Z" />
        <EventRecordID>181576</EventRecordID>
        <Channel>Application</Channel>
        <Computer>email1.domain.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>DB01</Data>
        <Data>MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
    Diagnostic context:
        Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
        Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropLogon [254]
        Lid: 17082   ROP Error: 0x3EB    
        Lid: 26937 
        Lid: 21921   StoreEc: 0x3EB    
        Lid: 27962   ROP: ropExtendedError [250]
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 26426   ROP: ropLogon [254]
        Lid: 22086 
        Lid: 27206 
        Lid: 17990 
        Lid: 16966   StoreEc: 0x8004010F
        Lid: 31433   StoreEc: 0x8004010F
        Lid: 8620    StoreEc: 0x3EB    
        Lid: 1750    ---- Remote Context End ----
        Lid: 26849 
        Lid: 21817   ROP Failure: 0x3EB    
        Lid: 26297 
        Lid: 16585   StoreEc: 0x3EB    
        Lid: 32441 
        Lid: 1706    StoreEc: 0x3EB    
        Lid: 24761 
        Lid: 20665   StoreEc: 0x3EB    
        Lid: 25785 
        Lid: 29881   StoreEc: 0x3EB     </Data>
      </EventData>
    </Event>

    Hi
    This error occurs because the MailboxReplicationService (MRS) currently caches Mailbox Database information past the lifetime of some databases. 
    Restarting the service will clear the cache.
    Maybe it is the simplest way to solve it.
    If it doesn’t work, you can try cmd to check it.
    Get-MailboxDatabase : Can you find the database which you delete?
    Remove-MailboxDatabase -Identity "MyDatabase": You can try to delete database if you can see the database.

  • The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error. Event 1121

    Hello all,
    We migrated our Exchange server from 2003 to 2010. After the mailbox move requests were finished we had one that was stuck. We basically skipped it as we had a lot of other things to finish over the weekend. Here we are a year later, the old exchange server
    is gone and so is an old DC. I am receiving an error every four minutes in event viewer.
    The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
    Request GUID: '3e46b7cb-2ac0-42c1-98e8-57517a19ee40' 
    Database GUID: '5c6c573b-4f45-4ce3-b296-11cf69c2e2b6'
    Error: Unable to find 'OLD Domain Controller' computer information in domain controller 'OLD Domain Controller' to perform the suitability check. Verify the fully qualified domain name..
    I have checked in EMC for move requests. None are listed. I have checked the DCs listed in EMC properties. Old DC is not listed.
    I also ran these commands in shell to attempt to cancel the stuck request.
    Get-MoveRequest -MoveStatus Completed;Pending;InProgress;Failed;CompletedWithWarning;Suspended;Queued;CompletionWithProgress : Remove-MoveRequest
    NO changes. Still throwing error. Any suggestions? I also tried using the guid and shell to look at the move request. Systems replies no such request.

    Hello,
    Please try to restart iis services to check the result.
    If the issue persists, I recommend you ping you DC server on your exchange server to check if your exchange server can communicate with your DC server.
    If there are other DCs, please try to use set-adserversettings cmdlet to specify a DC for your exchange server.
    Set-AdServerSettings
    http://technet.microsoft.com/en-us/library/dd298063(v=exchg.150).aspx
    Besides, please install the lasted rollup to check the result.
    Cara Chen
    TechNet Community Support

  • Group Policy Client service failed! Help!

    A few days ago I was booted out of my account, while watching a DVD. My system restarted itself, but not before flashing some sort of blue screen. Unfortunately I was unable to read the content of it. After restarting, I was presented with a light blue login screen, instead of my normal screen. However, my name and profile picture remained the same. I was able to login with my password, only to be informed that I had been set up with a temporary account. I was unable to access my files, and had no idea how to access my regular account. After logging out, and restarting in hopes that it would go back to normal... my system went into recovery mode, and afterwards presented me with the same temporary account login screen. Only this time, I was unable to login. Instead I received "The Group Policy Client service failed the logon. Access denied" message. I'm the only user (administrative), and my computer has no internet connection. So, I'm not sure if this is a simple error; a result from my low capacity battery needing to be replaced, or a virus. I've checked previous forums, but I've had no luck. I can't login to my computer at all, and it's very frustrating. I've also backed up my files, just in case my system has to be restored to its factory settings (I hope not). Could any one tell me how to resolve this? Please!
    - Frustrated (Pavilion dv6-1350us) User

    Hello @chigi93 ,
    Welcome to the HP Forums!
    I understand you were booted from your account and can now only log in with a temporary account.
    Windows does this when the main account is unavailable. The account most likely needs to be repaired.
    Please follow this document to fix a corrupted profile: Fix a corrupted user profile.
    If that doesn't work please go through this document: You receive a "The User Profile Service failed the logon” error message.
    Let me know if that works.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • The User Profile Service service failed to Login user Profile error in Windows 7 Home Premium

    Hi,
    I recently purchased a new Dell Inspirion 1564 Laptop which had Microsoft Windows 7 Home Premium 64-bit installed.
    The hardware configuration is i5 core Processor, 4GB Ram , 320GB HDD and 512MB Graphics card.
    Today morning, I couldn't login as the system returned the following error after I entered the password.
    "The User Profile Service service failed to login.
    User Profile cannot be loaded"
    I couldn't login at all as i had not created any other user account, even the face recognition didn't work.
    I had to restore my pc to the previous state. I believe this happened after the installation of Windows Malicious Software Removal Tool x64 - March 2010 (KB890830) update, not immeditately though as i used the system few times after the installation of this update.
    Is this a bug? I cant imagine if this happens if I am about to give a presentation, its going to be disastrous!
    Any help is appreciated
    Avinash

    I'm getting the same issue - I'm the IT Manager at a school where every student has a laptop (fujitsu tablet T4410). This occurs to at least one new student every day. I have been unable to re-create the issue on demand, although I suspect it occurs when a temporary user profile gets created after the logon process takes too long (due to some disk activity, possibly related to windows updates or some thing). When we were creating student accounts on the machines, this would occur if we attempted to log in the newly created account before the computer had 'settled down' - it seems that there is a logon timeout, after which something stops working. If the new user's first logon happened too soon after booting, the profile would be corrupted. But this doesn't quite explain why it occurs seemingly randomly now.
    My current solution is to boot into safe mode, back up the user's files, delete the account, create it again (the other suggested solutions on the internet did not work)
    If you're desperate, you can log in while in safe mode, and use that to create a new account.
    In any case, this is proving a very bad experience of Windows 7 for my students, and I hope to see a more useful fix for this soon.

  • User profile service service failed the logon?

    Every time I try to logon to my user account in windows vista home premium, it says :The User Profile Service service Has failed the logon. The User Profile Cannot Be Loaded." The Rest of the accounts on my computer still work fine. But New User Accounts say the same thing. System restore didn't even fix it when i restored back as far as possible. I've scanned for viruses with all security programs that I have, along with system diagnostics, etc. and still nothing. it still did it even after I moved all my  files to another user's folder and deleted my account. I didn't change anything or add or delete anything before it stopped working. When i go to " user profiles" in "System properties" it showed my profile was a backup and unknown profile size. after I deleted my account, it didn't show my profile at all.

    Posts 1
    Windows Vista Home Premium failed logon
    Hi, I have a Dell Inspiron 1720, about 4 weeks old, O S Windows Visa home premium.
    On switching on, my profile picture appears and requests the pass word, on entering the password the following message appears "The user profile service failed logon.User profile cannot be loaded"
    I have searched forums for assistance, but some say to press F8 on boot up I only have an F2 or F12 option on my Inspiron. also I only have one profile on the laptop as some are suggesting log on via guest profile and change settings, but i am unable to do this as i have no guest profile set up. Please help! 

  • "iPod service failed to start" during install

    Trying to update iTunes to the latest version however, I get the message "Service, 'iPod service' (iPod Service) failed to start. Verify that you have sufficient privleges to start system services"
    I'm using the administrator account. I can (sometimes) see the ipod service when i run services.msc from the run dialog box however i am unable to start it from there either as it says there's something missing. I've tried following the complete uninstall of iTunes and quicktime instructions on the apple support pages to no avail.
    Whilst the installer wont finish, i can still run the new version of iTunes by opening it form the 'program files\itunes' folder but if i try to close the install box, iTunes gets uninstalled again.
    I do vaguely remember disabling / doing something to the ipod service at one point for reasons i don't remember. I realise this is most likely the cause but how to solve it... i'm drawing blanks.
    Bring me back my iTunes... Please.

    Trying to update iTunes to the latest version however, I get the message "Service, 'iPod service' (iPod Service) failed to start. Verify that you have sufficient privleges to start system services"
    that can happen sometimes if the itunes installer is having a hard time shutting down either itunes or quicktime (or applications using quicktime) prior to the install. so let's try a "download, restart, then install strategy."
    leave your ipod unplugged.
    download and save a copy of the itunes installer to your hard drive. (do not run the install on line, and do not start the install by clicking on the iTunesSetup.exe (installer) file just yet.)
    iTunes 7.0.2.16 Installer
    shut down running applications and restart the PC.
    do not open any other applications prior to attempting the iTunes install. switch off antivirus and antispyware applications prior to the install.
    now start the install by doubleclicking the iTunesSetup.exe file.
    does the install go through properly this time?

Maybe you are looking for

  • Regarding error for sending mail

    hello , i was trying to send mail in linux. i have activated all the services such as smtp,pop3, imap and all needed services. i am also successful to set up domain in linux and able to send mail through mozaria mail box. but through code i face some

  • Query showing less data than the listcube

    Hi Gurus, For the same keyfigure I am getting $20 less in the query but the LISTCUBE of the multiprovider is showing correct value compared to R/3. Please extend your ideas. Thanks Nisha

  • Problem with installation elements 12

    elements 12 downloaded, but will not install on my mac pro desktop computer.  the message i get is "installer failed to initialize."  anyone have ideas why?

  • SETTING TEXTFIELD IN ANOTHER CLASS

    I have 2 classes: class1, class2. In class2 I have a textfield. In class1 I am trying to set the textfield in class2 with text: class2.textField_name.setText(string). This does not work - null pointer exception???

  • What Problems am I going to run into?

    IM getting my K8 Neo Platinum Thursday, but am a little daunted at all the problems on this board.  So here is my setup, what problems can I expect... AMD 64 3200+ 2.2ghz NC 2 x 512 Corsair XMS 3200C2 2 IDE hard drives Sound Blaster Audigy 2 ZS ATI X