WLSE - AP/WDS fails to complete full authentication phase

I need the patch for the following bug. I can't find it anywhere.. Can someone help.. I know people have used it to fix their issues before.
This issue is documented in Cisco bug ID CSCsb47726.
There is a pointed patch available for ACS 3.3.3 (both ACS software and solution engine).
To install the patch on the software ACS, perform these steps:
1.Browse C:\Program Files\CiscoSecure ACS v3.3\Support.
2.Re-name the AironetEAP.dll file to AironetEAP.dll.bak.
3.Copy the new AironetEAP.dll to the same folder.
4.Re-start the ACS services.
To install the patch on the solution engine, perform these steps:
1.Run the autoexec.bat file from inside the patch directory.
2.Log into ACS.
3.Go to System Configuration > Appliance Upgrade Status. Choose the appropriate download.
4.Enter the IP address of the computer from which you run the autoexec.bat
file.
5.After you have uploaded the patch to the ACS, click Install Upgrade.
6.Re-start the ACS services.
Make sure to create an ACS backup before the patch is applied.

The fix for this bug is a patch that needs to be installed on Cisco Secure ACS. In order to download the patch, open a service request with the Cisco Technical Assistance Center (TAC).
http://supportwiki.cisco.com/ViewWiki/index.php/Wireless_LAN_Services_Module_(WLSM)_access_point_(AP)/Wireless_Domain_Services_(WDS)_fails_to_fully_authenticate_with_Cisco_Secure_ACS_3.3_and_4.0

Similar Messages

"Load files into Photoshop layers" fails to complete CS6

Hi all,
Hoping someone can help with the folling problem with Photoshop & Bridge CS6
When in Bridge, after selecting 6 images (CR2) using the command TOOLS>LOAD FILES INTO PHOTOSHOP LAYERS the first file will load into Photoshop, Photoshop will then generate a second blank layer and then read the second file. At this point the "script" will stop. I am left with a document with 2 layers. The top layer has my first image, the bottom layer is empty.
At this point when I quit Photoshop I am prompted to save this open document which appears to be the only open document. I choose not to save this as a file. I then get a dialogue box prompting to save another open document. Photoshop has loaded the second file to place as a layer but as the "script" has aborted I am left with an open, but invisible file.
When I first loaded CS6 on Snow Leopard, it would demonstrate this behaviour every time I attempted to run this command from Bridge.
I did a clean install on a blank HDD of OSX Lion. Installed CS6. The command worked without fail for about a month.
Then I would get the command aborting occasionally. Restarting Photoshop would let me continue for a few hours before this aborted script problem would happen again.
Over the last week it has become more frequent, to a point where this workflow is unusable.
A restart of Photoshop may fix the problem for the next batch of images, only to fail again soon after, or fail on the first attempt after a relaunch of Photoshop.
A reboot of my computer will allow my to load one or two sets of files before again failing to complete the command.
I have tried the following:
In Photoshop preferences:
disabling the "Use graphics Processor"
Increasing or decreasing the amount of RAM available to Photoshop
Changing the cache levels or changing the cache tile size
changing the scratch disk
Trashing the Photoshop preferences file (Photoshop Settings.psp)
In Bridge
Purging the cache
Increasing or decreasing the cache size
Resetting Bridge preferences (holding Command on launch) and deleting all cache files.
In general system
Quitting extra programs (Safari, Thunderbird, iTunes)
Sometimes this will seem to then allow Photoshop to load a full set of images, only to abort again after a few sets.
Rebooting the computer - again will work for a few images sets before again failing.
Now the fact that it worked fine for several weeks without presenting a problem would indicate that it is not a bug.
The fact that is slowly started happening then became more frequent would indicate something changing slowly over time - a larger cache folder perhaps, although purging known Bridge cache folders has not filed the problem.
Really at the end of my tether here. Even considering downgrading to CS5 - but don't want to have to use the older Adobe Camera Raw.
System is as follows:
Mac Pro 2 x 2.66 Quad Core
24GB RAM
ATI Radeon HD 4870 512
OSX Lion 10.7.4
I have seen a couple of others have posted having a the same problem, both with CS5 and CS6.
Hoping someone has an answer.
Thanks.

Hi JJMack - I just re-read your post. For some reason I thought you were suggesting to make sure "Open documents in Tabs" was selected, it was. Now I realize you were suggesting to turn it off! As another attemp to solve this problem I did de-select it today. Seemed to work for a good while. I was getting very excited, then, on the last set of images I had to do it displayed the same problem. But, it did go for quite a while without failing, and when it did I was thrashing about trying to make another app active. When loading documents like this - with "Open documents in Tabs" de-selected, Photoshop wants to put the loading images as the front-most window, no matter what other apps (Bridge, email, web etc) I click on in the dock. I think it is related to the bug you described effecting the "load files to stack" command.
Hopefully Adobe is looking at this - mind you, I have read reports of people having this problem in CS5! Looks like that was never resolved sadly.
I'll keep testing and post back.
I am looking to upgrade my video card to see if it's a video memory thing.
What is very weird though is the fact that this problem didn't present itself until after several weeks of working with this command with no problem. No additional apps installed, nothing changed. Why would it start happening only after a while?
Thanks again for your suggestion.

Distribution failed to complete

Hi experts,
I am in the process to distribute a report in reports and forms 10g and DB is 10g. In the forms menu I have used this code to call the report
web.show_document('/reports/rwservlet?MYKEY&report=myreport.rep'||'&DESTINATION=distribution.xml'||'&DISTRIBUTE=YES'||'&_BLANK');
after the parameter form I get the following error message
REP-34304: d:\orawin90\reports\dtd\distribution.dtd (The device is not ready)
REP-34304: Distribution failed to complete; review the distribution lists
I wonder from where d:\orawin90.... is coming, because in my distribution.xml file I have not mentioned any path like this.
But if I mention the .xml file hardcoded full pathname then the report runs without this error msg in the server but not from any client machine.
following is my distribution.xml file content which resides in the same folder where my all .fmx and .rep s are there in the server.
<destinations>

<foreach>
<mail id="ex2"
to="&<email_id>" ----------email_id is a column in the report
from="[email protected]"
subject="This mail contains Medical Statement for &<emp_no>">
<body srcType="text">
Please find attached your Medical statement.
</body>
<attach format="pdf" name="medstmt_&<emp_no>.pdf" srcType="report" instance="this">
<include src="mainSection"/>
</attach>
</mail>
</foreach>
</destinations>
Any help is appreciated
Thanks

Try booting in Safe Mode and downloading http://support.apple.com/kb/HT1455

BACKUP failed to complete the command BACKUP DATABASE. Check the backup application log for detailed messages.

Hi,
We have a back up that is failing.
The error is "BACKUP failed to complete the command BACKUP DATABASE RPS. Check the backup application log for detailed messages.".
As I understand it the backup application log is at C:\Program Files\Microsoft SQL Server\MSSQL.2\MSSQL\LOG. From that all I get is
2014-03-05 14:49:29.41 Backup Error: 3041, Severity: 16, State: 1.
2014-03-05 14:49:29.41 Backup BACKUP failed to complete the command BACKUP DATABASE myDb. Check the backup application log for detailed messages.
The command I am using is
BACKUP DATABASE [MyDb]
TO DISK = N'D:\Domains\SQL_Backup\DB\myDb\Mydb_FullBackup_20140305_1100.bak'
WITH NOFORMAT, NOINIT, NAME = N'mydb-Full Database Backup', SKIP, NOREWIND, NOUNLOAD, STATS = 10
GO
The database is Microsoft SQL Server Standard Edition (64-bit) Version 9.00.1399.06.
The computer is Windows server 2003 R2 Standard Edition SP2
The Db is 191 Gb and there is 227 Gb available on the D drive where it's being backed up to.
Any thoughts as to how I can track down the problem.
Is the 227Gb of spare disk space big enough to back up a 191 Gb database?
If not how much is needed?
Thanks

Hello,
Can you apply latest service pack .I dont know but guess that can be issue.Once faced ,not quite sure.Also can you just make your command like
BACKUP DATABASE [MyDb]
TO DISK = 'D:\Domains\SQL_Backup\DB\myDb\Mydb_FullBackup_20140305_1100.bak'
WITH NOFORMAT, NOINIT, STATS = 10
GO
Just a simple one .Is backup failing immediately or after some time .Error is not so helpful as it does not shows any information
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

WLC Failed to complete DTLS handshake with peer

WLC 5508 running 7.0.98.0
Site was running fine until the WLC had a hardware failure.
A new WLC was shipped out, was running 6.0.99 then manually upgraded to 7.0.98. Clients cannot authenticatewith recurrent logs messages like this.
*dot1xMsgTask: Feb 23 17:05:03.648: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2914 Max EAP identity request retries (3) exceeded for client 00:21:5c:<snip>
*spamApTask0: Feb 23 17:05:01.926: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:629 Failed to complete DTLS handshake with peer 192.168.214.91
I have tried changing the key on the radius server to no avail.Anybody have any ideas?

DTLS message corresponds to an AP not joining or disconnecting.
The EAP message above is about a client not finishing its dot1x authentication.
Since what changed is the WLC itself, I would check for changes :
-did it change ip address ? is the config EXACTLY the same as before ?
-What does your radius server reports as failed attempt reason ?
Nicolas

4630 Scan Failed to complete error - OS X Yosemite

I bought the 4630 about a month ago and have tried scanning on 3 different Macs running OSX 10.10.1. The first scan after initial set up works. After that, I get either "The overview scan failed to complete" if the Details window is open or "The scanner failed to complete the scan" if the Details window is hidden. I've tried re-installing the 4630 dozens of times. I just downloaded the last HP software for it. Please help.

Hello @JohnGillen , and thanks for posting on the HP Forums!
I can see you're experiencing scan issues. I'd love to help with that!
I have a few steps I'd recommend:
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend reinstalling the printer: HP Officejet 4630 e-All-in-One Printer series Full Feature Software and Drivers.
Good luck and please let me know how it goes!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Payment engine failed to complete installation at startup

Hi All,
When first logging into SAP B1 8.8, the payment engine installation message came up but then it display error message "1628: Failed to complete installation". But when logging in as administrator on the server, the payment engine loaded ok.
I'm suspecting it's got to do with permission of certain payment engine files so i set full control for all users to SAP AddOn folder but still no luck.
Did anyone have this problem and know what the cause is?
Thanks,
Ric

Hi Ric,
Please navigate to run --> %temp% and rename the folder SM_OBS_DLL as SM_OBS_DLL_old and restart SAP Business One.
Let me know if this works or you will need to remove Payment add on details from the C:\Program Files\SAP\SAP Business One\AddOnsLocalRegistration.sbo open with notepad. Is this occurig on one client machine or on all user machines
Regards,
Rakesh N

HT4623 Started to download IOS 6.1 and failed to complete due to no wall charger. Now download fails w "failed verification be

Started to download IOS 6.1 and failed to complete due to no wall charger. Now download fails with "failed verification because no longer connected to internet. Wi-fi shows my linksys. What's up?

1968GTX wrote:
I think maybe the download is in the phone because it switched from download to a preparing message. It almost completed, blu bar nearly full and then the fail message. Today, on a different wi-fi, I get the Unable to Verify Update message. Is there a way to clear and start over?
Seems to be a content expiration issue, probably to keep the load down on the servers hosting the updates. I've found that resetting your network settings does the trick, even if it is a little overkill.
settings - general - reset - reset network settings
originally posted here: https://discussions.apple.com/message/21300337#21300337

Remote Desktop Virtualization Host failed to get redirection authentication information from the virtual machine

Hello,
When implementing a VDI solution, I'm getting an error on our virtualization host server. The error is:
Remote Desktop Virtualization Host failed to get redirection authentication information from the virtual machine [VDI-PC].
Hresult 0x8000FFFF
Event ID 8467, Severity: Warning, Source: Microsoft-Windows-TerminalServices\TSV\VmHostAgent
This error happens every time a user or admin connects to a VDI desktop. This is a fresh install of Remote Desktop Services on completely fresh servers. This is in testing and we have not ever had it working before without the error.
Topolgy: Server2012 R2, Windows 7
Srv-RDCB1: Is the connection broker and Web Access server. It is Virtualized thru Hyper=V.
Srv-RDVH1: Is the virtualization host. It is a physical server. It also has a separated hyper-v role (for RDS VDI deployment).
Everything seems to be functional other than this error in the log, and I haven't found any information on what this could mean.
Any help is greatly appreciated, thanks!

Hello. I have this trouble too.
All roles on one server.
Deployment type - Quick start
Deployment Scenario Virtual mashine-based desktop deplyment
Reinstall all roles 2 times
Warning TerminalServices-TSV-VmHostAgent
8467 Orchestration
Remote Desktop Virtualization Host failed to get redirection authentication information from the virtual machine [per-0] .
Hresult: 0x8000FFFF
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-TerminalServices-TSV-VmHostAgent" Guid="{92618A87-2F6A-4B75-9AE2-E77BE7EAF43C}"
/>
<EventID>8467</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>22</Task>
<Opcode>14</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated
SystemTime="2014-11-11T13:24:45.579138000Z" />
<EventRecordID>1655</EventRecordID>
<Correlation
ActivityID="{F4200EF7-FEDD-4CAD-9F5D-6219A5F30000}" />
<Execution ProcessID="3164" ThreadID="13164" />
<Channel>Microsoft-Windows-TerminalServices-TSV-VmHostAgent/Operational</Channel>
<Computer>blade2.vzfei.local</Computer>
<Security UserID="S-1-5-20" />
</System>
<UserData>
<EventXML xmlns="Event_NS">
<param1>per-0</param1>
<param2>0x8000ffff</param2>
</EventXML>
</UserData>
</Event>
In RD Gateway Manager, right-click on the RD RAP and click Properties. On Network Resources tab select
“Allow users to connect to any network resource”.
not work.

Hard drive completely full computer not responding well What to do

My daughters MBPro has been problematic.
Recently it was misbehaving, and I was able to get about 10GB below capacity. Which really helped. Now however she comes to me and says email is not working and weird stuff is happening. So I certainly a novice at best look it over and the hard drive is completely full, zero space. She I am sure has not add much data, if any over the past few weeks that would have taken up 10GB. I noted thaat she did a recent software update, which may have pushed it over the edge.
Anyway, I launched a Carbon copy clone of the HD in order to hopefully prevent total catastrophe. This is running now.
We could not seem to even delete photos, etc. itunes stuff to help a bit. Kept getting error that it could not save itunes library or iphoto library.
Tomorrow I'll bring the computer to Apple Store for help. Is there anything I can do in the mean time??
Regards,
Jim Svarz

OK, it's me, talking about what I would do...
I would delete both "folders" FULL STOP.
There's an article in Apple's KB suggesting to trash anything in the /volumes/ apart from ANY mounted discs or images.
So, o fcourse, it's your call, but my advise would be to trash them.
Considering the number 1 after the name, the files are leftovers from "Free Agent Drive" (some backup software - I guess), therefore safe to trash - there's your HD space!
As to CCC, if you are cloning (as opposed to backing up just a few folders) your clone would have those files on it as well, which is bad and good at the same time...
If you have a recent-ish clone, delete the files from the HD and if everything runs just fine, delete them from the clone as well. If anything refuses to run or crashes (VERY unlikely in relation to those two folders) you can always restore them from the clone.
Please keep us posted, it's worth learning stuff, innit?
PS. Does PS make any sense in electronic writing? I could just edit the text... hmmm...
PPS. Back on the topic. Is "Free Agent Drive" the name of your backup volume? If so, I am 99.9% certain it's a CCC leftover - safe to delete.
Apple KB article (which I can't find at the moment) says that it does happen under Leopard that stuff can get left over in volumes and it's not a fault of any third party software. You will forgive me if I don't spend my night trawling for that article, but you could have a look for it here: http://support.apple.com/kb/index?page=search
Message was edited by: i.3d

One or more required office component failed to complete successfully for more information, consult the setup log file. while uninstallation of sharepoint 2013

One or more required office component failed to complete successfully for more information, consult the setup log file. while uninstallation of sharepoint 2013

go to start > run > type %temp% > here check for latest file and provide us details in that log file
If this helped you resolve your issue, please mark it Answered

TS2529 I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.

I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.

Hi, I disabled the antivirus and the firewall. Same result
I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
My iphone 5 is not jailbroken, and is a factory unlocked phone.
Any other suggestion?
Pls help

Java_es_05q1-windows-x86 install fails 1628: Failed to complete installation on windows xp pro sp2

Hi All,
I'm trying to install Java ES 2005Q1 on my windows xp pro sp2 notebook, but it always breaks with this error message: 1628: Failed to complete installation
I realized that the SUNJavaES.log always ends at line 151 which is 131077 characters long.
These are the last few characters of this line: ..." AD_MANUAL_ES_CONSOLE_HELP=D:\Sun\JES2005Q1\Server-Root\manua l\es\console\help\ AD_MANUAL_FR_ADMIN=D:\Sun\JES2005Q1\Server-Root\manual\fr\ad min\ AD_MANUAL_FR_ADMIN_HELP=D:\Sun\JES2005Q1\Serve "
I attached the last log file.
This line always breaks at the 131077th char independently of the content of it. I tried to skip some components of JES to see what will occur. The current content of this line obviously was different, but it has broken at the same point.
Thanks in advence for any help.

This could be due to a known issue with length of installation path
Can you try and install in a location with less than 8 characters ?
eg: C:\JES05q1 or C:\Sun

HT1998 Time machine no longer backs up. It prepares for back up OK but then fails to complete. The archive is still available. Any ideas? Thanks

Time machine no longer backs up. It prepares for back up OK but then fails to complete. The archive is still available. Any ideas? Thanks

Unfortunately, not much to go on here. There are any of twenty different reasons why backups are not occurring, and no shortcuts that I know of to find out why.
Work your way through Backup Failures in Pondini's excellent support document Time Machine --- Troubleshooting.
See C1 through C19.
http://pondini.org/TM/Troubleshooting.html

Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.

Hi,
I got the below error while installing share point 2010 on Windows 7 OS.
Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.
Trouble shooted by following link as below
http://christopherborman.blogspot.in/2013/01/installing-sharepoint-2010-on-windows-7.html
But still i am facing the same issue.Please share your inputs to cross this issue.
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I selected Server Farm Mode,stand alone.
Post that installation went fine.
Regards,
Sudheer
Thanks & Regards, Sudheer

WLSE - AP/WDS fails to complete full authentication phase

Similar Messages

Maybe you are looking for