Won't reschedule PR/PO

Hi
after insert a new production order, SAP reschedule existed PR/PR for components marked exception message. if the required Qty isn't available, then generated a new PR/PO. but the new schedule date isn't the requirement date.
My question is that I hope sap gerenates a new PR/PO according to this new inserted production order
Regards
Henry

Hi Henry,
If you do not want the system to consider the existing procurement proposals & propose a re-scheduling date for the same, then go to OPPQ specify your plant & click on rescheduling, here you can specify which firmed proposals considers during the rescheduling, so untick the fixed purchase requisition, then system will not consider the same & you will find a new procurement proposal.
After making the settings as per your need, re-run MRP with planning mode as 3. But be careful as you might end up generating a lot of procurement proposals & that might add another issue for you. So please be judicious & have a right business case for making the changes.
Hope the above helps.
Regards,
Vivek

Similar Messages

Siri won't continue when I touch the meeting I want to reschedule

I'm syncing my iPhone with Google Calendar (through the Microsoft Exchange protocol that Google provides). I only have this one calendar on my iPhone. Let's say I have 3 meetings tomorrow. Since I don't remember the exact names of them, I'll say "Reschedule tomorrow’s meeting” which Siri will respond “You have 3 meetings tomorrow. Touch the one you want to reschedule”. The 3 meetings display properly, but as soon as I touch one, Siri responds “You have no meetings tomorrow” and won't continue.
However, if I know the exact name of the meeting, I can say “Reschedule the ‘conference call’” and Siri will find it and process it properly. Does anyone else have this issue?

Hi, my camara is approved.. my memory is 1 GB DDr2 SDRAM
and my processor is 2.16 GHz Intel Core Duo
I know that Mac is not supposed to get viruses, but what else is going on here? It sure acts like one.. at least as far as my experience goes with non apple viruses.. I have found since I posted this problem that if I drag my clips out of the trash I can restore them.. but have just tried that and the fly right back to the trash, and when I click on a clip to open it, this message appears: "to use this item, drag it out of the trash first".. which is what I just tried to do, but like I said, it just flies back to the trash like it is attached with a rubber band..
Any help is very much appreciated.. Thanks.

ITunes Won't Recognize iPhone / Crashes

Since Sept. 28, 2010, I've been unable to sync my iPhone with iTunes on my PC. iTunes exhibits one of the following symptoms: (1) iTunes is very slow to start; recognizes my iPod but not my iPhone; (2) iTunes locks up and crashes after startup; or (3) iTunes won't launch.
I've called Apple tech support, and removed and reinstalled iTunes, Bonjour, QuickTime, and all apple components 3 times. This has not resolved the problem. QuickTime continues to work fine despite problems with iTunes.
In the EventViewer there are problems with Bonjour loading on system startup. I've "disabled" Bonjour at system startup, and reinstalled iTunes, but this has not resolved the problem.
I am not running IOBit's Advanced SystemCare Utility, which has been mentioned as a problem for some on this site. Computer is a Dell Vostro 430 desktop (6 months old), and TrendMicro is my virus software.
Please help. I want to be able to backup my iPhone again.

Good gracious. At 8.24 am on 30 September, you launched iTunes and it did a repair install of itself because a file didn't show up when it checked actually-installed files against the records of what should be on your machine in the iTunes installation database. The file in question is the:
C:\Program Files\iTunes\iTunes.Resources\RatingFont.png
That usually indicates file or disk damage. And there's been plenty of suggestions of similar sorts of damage in the other error/warning events and attempts to run sfc. So rather than a System Restore, I think we should instead try running a chkdsk over your C drive.
There's instructions in the following document. Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r, depending on how you choose to go about it. You'll almost certainly need to reschedule the scan to run on restart. This sort of scan of the C drive should take quite a while ... if the scan stops after a few minutes or seconds, something's interfering with the scan.
[How to perform disk error checking in Windows XP|http://support.microsoft.com/kb/315265]
Does the scan find/repair any damage?
If so, let's do another complete uninstall/reinstall of iTunes and related software, as per the following document. If Windows doesn't let you delete any files or folder, post back to let us know what the error messages say, and which files/folders you're getting them on. (My concern is that other file damage may have interfered with the replacement of program files during previous attempts at uninstall/reinstalls, which is why the problem has persisted past the previous uninstalls and reinstalls.)
[Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP|http://support.apple.com/kb/HT1925]
If everything repairs/uninstalls/deletes/reinstalls successfully, do your iTunes, BonJour, iPhone, etc, start behaving a bit better for you?

MRP Type V1 - Does it create Exception Message for "Reschedule-in"?

Hello Experts,
We are using MRP Type V1 (Which has the Manual Re-Order Planning + External Requirements). However we are facing and issue with the Rescheduling part. Scenario is as following:
Material ROP is - 5000
Open Pur Ord is - 5000 (due in 01 June'09) based on the Std Lead time of the Material
Stok on hand is - 0
At this point a Sales Order is entered for 1000 pcs
After MRP Run, we expect an Exception Message for the Purchase Order to have "Reschedule-in". But, instead, system creates a PReq for 1000 pcs and the required date is NOT the Sales Order required Date but based on the Std Lead Time of the Material.
I have set the Material Lead time - 60 Days
I have set the Reschedule horizon - 0 Days ( I even tried with different Days but NO use)
However, when I change the MRP Type to PD, system generates a "Reschedule-in" Exception Message for the Purchase Order.
How can I get the "Reschedule-in" Exception Message for the Purchase Order with the MRP Type V1?
Thanks for your help in Advance!

Anil,
Reorder point/External MRP performs net requirements calculation (within replenishment lead time). If the existing firmed supply elements minus the existing requirements bring the projected stock below ROP, it will propose an order that will bring the projected stock back to reorder point. The proposal will generally come at replenishment lead time.
In the normal business cycle, your sales order would confirm to lead time, and you now have a confirmed sales requirement at lead time, plus a new purchase req to bring the stock back to the reorder point. The scenario you have described is working exactly as it is designed. Consumption based MRP will not normally try to reschedule supply elements to match requirements inside of lead time.
Rescheduling horizon generally is counted from the end of lead time. It won't help you here.
I guess if you insist on having a reschedule message, you could change your lead time to 0 days. Not a wise move in my opinion. You then have locked yourself in your choices of types of Sales order availability checks into one that ignores lead time. You also have to find a way to let your buyers/planners know what the 'real' lead time is when they place their orders on the vendors.
I don't know why you are using a consumption-based planning type (reorder point). It sounds like your business requirements are that you actually need to be using a demand-type planning method (eg, your supply elements are driven by your demand, not by a reorder point/desired stock level). If PD works the way you want, why aren't you using it?
Regards,
DB49

Prevent reschedule on released process order in APO

Hi,
We have a business requirement that does not want APO to reschedule on released process orders regardless of production posting quantity. (don't want to change the order end date/time) It is similar to R/3 scheduling type "only capacity requirements", but with visibility on APO for resource capacity.
I tried to implement CIF user exit EXIT_/SAPAPO/SAPLCIF_ORD_001 with different logics, but still not able to achieve it. How can we make the system do what we want? What is the key for remain process time calculation? Please advice.

For example: we have a released process order that starts at 10/01/2007 00:00:00 and ends at 10/06/2007 23:59:59 with quantity 7000 KG (1000 kg of production rate per day).
When a production posting is made (for example: 700 KG was posted on 10/01/2007 23:59:59), CIF sends the update to APO and APO reschedule the order based on the remaining quantity 6300 KG) and the end time of this order becomes 10/07/2007 07:12:00. In our lines, the production order may not be started on time and posting may be different than what we expected, but we want the order still shows up in APO as start time 10/01/2007 00:00:00 and end time 10/06/2007 23:59:59 with daily distribution of 1050 KG for 10/02 ~ 10/06. This way, it won't mess up the receipts and resource capacity on PPT for next week's production.
Thank you.

QM Lot Rescheduling

Hi Gurus,
I noticed that QM-Lot can only be Reschedule Out as i see in MD04. Is it SAP standard or can I consider QM lot to be Reschedule In also via configuration? I have already checked the indicator for Rescheduling in OPPQ transaction for this one but it does not work.
This is because I have a sample scenario below:
9/8/2010 - Order Res -200
9/10/2010 - QM-Lot 300
9/15/2010 -Order Res -100
Now after MRP run, i will have below output:
9/8/2010 - Order Res -200
9/8/2010 - Pur Reqs. 200
9/10/2010 - QM-Lot 300 >>>> Reschedule out to 9/15/2010
9/15/2010 -Order Res -100
Now, is it possible to have this QM-Lot to have exception message reschedule in to 9/8/2010 so I won't have a purchase requisition which I think is wrong. As you can see it will prompt me to buy but I already have stock in QI, thus I will have an overbuy.
Please enlighten me of a possible solution.
Thanks,
Raymond

Hi,
OPJJ has the tick mark for include inspection stock.
The issue is for Lot, the exception message is "Reschedule Out" and doesn't propose "Reschedule In" exception messages. We are using ECC 6.0.
MD04 is like the scenario I mention above. In OPPQ, I already maintained for QM. OPPR and OPPQ has 365 days rescheduling period.
Its working for PO and Shipping Notif. and doesnt create PR instead propose to "Reschedule In" for this firmed requirements. Only if QM Lot it proposed PR and does not show exception message to "Reschedule In".
Thanks,

Verizon changed my install date, didn't show/call, and now won't give me original slot - help?

Hi guys - looking for some advice on who to speak to in order to solve my problems.
I moved to a new apartment yesterday and had a Fios installation scheduled for Monday morning. I preferred the weekend, since Monday morning causes me to miss work.
This morning, I called Verizon to see if there were any cancellations today - they told me yes! And they could install between 1pm and 4pm today.
I reschedule all my plans today to make sure I'm home during those hours, and let my boss know that I'll be into work at a normal time tomorrow. 4pm passes by, and no sign of Verizon. I call up the support number, ask them what is happening, and they said that they won't be able to install my services today. If I didn't call them, I apparently would've just continued to wait - no email, no call, no notification at all that my appointment had been canceled or no reason. It seems ridiculous that my installation would be canceled when they scheduled it for me only a few hours earlier.
Then, to make it worse, they will no longer give me back by Monday morning appointment. So they rescheduled me, didn't show (and didn't tell me they weren't showing until I called them), and give away my original appointment and now I won't be able to have internet this week.
I've never been a Verizon customer before, and despite my best efforts to become one, it seems like they are doing quite a lot to ensure that I don't. I've never experienced such awful service before.
Is there a particular department I can lodge a complaint to? Or even to get an explanation of why any of this happened? I'm just so incredibly frustrated right now and I feel entirely helpless, because no one I talk to has answers for anything whatsoever.

Hi mg1234,
Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

Since installing Maverick on my 21in. 3.2ghz iMac, cannot upload to any application without it locking up, Aperature opens automatically, my printers don't work and Apple has failed to reschedule a appointment with a Tech on Case *******in 3wks

Since installing Maverick on my 21in. 3.2ghz iMac, cannot upload to any application without it locking up, Aperature opens automatically, my printers don't work and Apple has failed to reschedule a appointment with a Tech on Case ********* in 3wks
<Edited by Host>

Sorry you've decided this is a rant but the objective observer would know that all I want is a solution to at least the 3 issues mentioned. I spent the better part of 2 nights with techs that had me doing all the standard refresh items, i.e. setting the PRAM... and as time goes on my frustration grows. Last week spent days trying to find the driver software Maverick now needs and Apple is supposed to have it and doesn't. So at what point does this become a rant? I've done things the right way had mucho patience thus far and as a kicker, Apple won't let me download Mountain Lion to reinstall and rid my self of Maverick. Tell me, would you complain?

I moved iTunes music to my hard drive "D" and now it won't open!

My hard drive "C" was getting somewhat full, so I decided to move my iTunes music files over to my second hard drive "D" (I have a dual hard drive on my computer). When I try and open iTunes, it says, "The folder 'iTunes' cannot be found or created, and is required. The default location for this folder is inside the 'Music' folder."
I cannot open the "Music" folder, because when I do, it just opens up the same window I was already in when I tried to open it. The main reason I want to open iTunes is so I can reset my iPod because it is not working anymore. The scroll wheel, the hold button, the backlight, and it automatically sleep mode (after not touching it for a couple of minutes) is all that works. I cannot click anything.
I have moved all of my iTunes folders back over to my "C" drive, but it still won't work. I also reinstalled iTunes in the "Music" folder, and it won't work. Basically nothing has worked!

You might find this article useful, don't be put off by the title, the process is substantially similar moving to another internal drive: iLounge - Managing your iTunes Library on an External Hard Drive

Adobe Stock Photos Stuck in Trash and Photoshop CS2 won't run!

Okay, I apparently did something stupid. I'm not even sure how this happened, but I realized that Adobe Stock Photos folder was sitting on my desktop (I'm using OS X 10.5.6). I don't know when this happened and I didn't think I needed it so I dragged it to the trash. NOW I cannot run any of my Adobe software (includes Photoshop CS2, Illustrator CS2 and GoLive CS2).
I can see the folder sitting in my trash, but it won't let me drag it back out. So, just as a test, I tried dragging out the one other file (.jpg) and I can't get that one either. I know this isn't a Mac forum, but I'm desparate and cannot find anything to help me.
Probably I am going to have to reinstall everything and (of course) I can't find my CDs!!! Please don't get angry if I'm asking the wrong question. I've done an internet search and I cannot find any solutions.
Thanks, Anne

Adobe stock photos does not even exist anymore.
Have you tried deleting your trash? I have no Adobe stock Photos on my computer and everything works. try restarting the computer.

IPhone 5s Voice memo to mp3. Now music on iPhone. Won't play from search function.

I record my band rehearsals using the voice memo on my iPhone 5s. Then I sync to iTunes and convert file to mp3. When i sync back to my iPhone it appears in my music. So far, so good. When I use the search function in music it finds the file but won't play from tapping. I must troll through all my music songs (currently 2227 of them) to find it and then play it. Is it something to do with it still being under the genre "voice memos" or what ? Anybody help please. Thanks

iWeb is an application to create webpages with.
It used to be part of the iLife suite of applications.
iWeb has no knowledge of the internal speaker on your iPhone.
You may want to ask in the right forum.

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already have it installed...

1.      Are you getting any error message?
2.      Which browser are you using?
3.      Were there any recent changes made on the computer prior to the issue?

My iPhone 5 won't display smart text options.

My iPhone 5 won't display smart text. It did when I initially downloaded the new OS, now those options don't appear at all. Did I click something to make them disappear?
I went into Settings to see if there was a component of it within Messages. I don't see anything.
Thoughts please.....
Thanks much
Ginger

Awwww......that's it....the dash! I tapped it. Tried to drag it up/down and it didn't move. Now I swiped and it's back!
So I need to remember to drag up/down and now swipe.....
Thanks much!
Ginger

Loops and certain instruments won't download properly

The loops won't don't download as well as certain instruments. Any help?

This is the WMP plugin: np-mswmp , so you have it.
You may be missing a codec to play that content or some extension or security software is blocking that content.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Internet Problem - One site will load, another won't. Then mintues later, the site that previously would load won't and the one that wouldn't will. I'm also pulling up a lot of pages in all text. Pics won't load or only one will load and the rest won't...

Several weeks ago, I began to have some very strange internet connection issues. All the lights on my modem stay on and my computer shows full wi-fi signal, but I suddenly I won't be able to load any pages. Other times, I'll be able to load pages from one site, but not another. It's not the same sites all the time though.... sometimes I'll be able to load pages from one site and not another, and then 5 minutes later it'll switch and I'll be able to load pages from the site I previously couldn't and I won't be able to load pages from the site I previously could. A lot of pages are coming up just text with no pics... and then 5 mintues later that site will load normally and another site will come up just text. It does the same thing whether I'm connecting wirelessly or via an ethernet cable. It also doesn't matter which browser I use (I've tried Safari, Chrome, and Firefox). Although, once in a while when using chrome, I get a DNS error page instead of the usual 'cannot find server'. I contacted my service provider and I'm not losing speed or dropping packets. According to them, the problem I'm having is very strange since diagnostic tests show no problems at all. Perhaps someone has run into this before and has a suggestion?

Then if you have tried all the browsers try connecting the system to yoour router with an Ethernet cable and turn WiFi off. If you have the same problem then it more then likely after your computer, Router or modem or connection from your ISP.
If you get good browsing with the Ethernet cable then it is either the WiFi card in your Mac or the WiFi system in your router.

Won't reschedule PR/PO

Similar Messages

Maybe you are looking for