Word 2007 doesn't open any documents.

Hello.
Our team are running Outlook 2010 and all the other office apps in 2007.
However, Word 2007 always has a problem with opening documents.
It works, shows none of error messages and the Word 2007 window opens properly but just doesn't show any documents.
To open a document, I have to drag and drop a document in Word 2007 that I want to.
After this small bothering task, everything works really fine.
I have changed every settings and add-in that could cause this issue.
To solve this problem Word 2007 has to be removed and installed again.
I'm really struggling to fix this issue but haven't found any reason.
Please help me with this issue!

Yes I thought of the same thing.
What I found was 2010 changed something in 2007 after Windwos Update.
This might be registries.
An error message box pops up saying 2007 got damaged when I try to remove 2007 from Programs and Features and the list of 2007 is just gone leaving all the functions and feature stayed on a computer.
Office 2007 still works after removing just 'the Office 2007 list' though.
In this case 2007 has to be installed(actually over-installed) AGAIN to write 2007's registry properly, remove 2007 than install 2007 again.
So annoying... to fix this issue, have to do this task...
As you mentioned, I need something to manage the registry and will read the description on the web page carefully.
Thank you so much. Stefan Blom.

Similar Messages

Word 2013 (64-bit on Win8.1 64-bit) crashes crashes on opening any document by double-click

Very much like thread
https://social.technet.microsoft.com/Forums/office/en-US/2e9b63f5-7c94-44f6-9177-f936d980388a/word-2010-64bit-on-win7-64bit-crashes-crashes-on-opening-any-document-by-doubleclick?forum=officesetupdeployprevious I experience the same problem with Word
2013 on Win 8.1. As I don't need them, all add-ons where disabled. The document opens proper in the 64-bit Mac Office 2011
There is not GUI error message. Office was freshly installed. In the event log there are only the normal messages from Security-SPP. Are there other source of logging that could hint in the proper direction?

Hi,
Since the issue isn't related to Add-ins, please perform a clean boot to determine whether background programs are interfering with Word:
1. Swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click
Search.
2. Type msconfig in the search box, and then tap or click
msconfig.
3. On the Services tab of the System Configuration dialog box, tap or click to select the
Hide all Microsoft services check box, and then tap or click
Disable all.
4. On the Startup tab of the System Configuration dialog box, tap or click
Open Task Manager.
5. On the Startup tab in Task Manager, for each startup item, select the item and then click
Disable.
6. Close Task Manager.
7. On the Startup tab of the System Configuration dialog box, tap or click
OK, and then restart the computer.
More information about clean boot can be found in this kb below:
http://support.microsoft.com/kb/929135
You will also need to read the section "What is next when I have a clean boot environment?" to troubleshoot the problem.
As you mentioned, if you find any threads that indicates the updates aggravate the problem, would you please share the thread link with me?
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

After clean install Preview and MS Word won't open any documents.

Did a clean install of Mavericks. Restored my files from dropbox. (thousands of pdf and word files, doc. and docx)
Now, preview and MS Word won't open any documents.
Preview fails to open PDF so as MS Word fails to open any doc or docx file. Both crash on launch (not responding).
The only way to open the files is renaming them.
Try to delete the .plist (preview and Word), dont work.
Anyone know how to fix?

Hi Myelenium,
Thanks for the info about Event Viewer!
It's showing this message:
Faulting application name: Illustrator.exe, version: 16.0.0.682, time stamp: 0x4f6e762b
Faulting module name: AGM.dll, version: 4.26.20.19822, time stamp: 0x4f56925c
Exception code: 0xc0000005
Fault offset: 0x0024ed0b
Faulting process id: 0x1a58
Faulting application start time: 0x01cddf8abaeab2fc
Faulting application path: C:\Program Files\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\Illustrator.exe
Faulting module path: C:\Program Files\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\AGM.dll
So I searched the forums for any previous AGM.dll posts and tried resetting the preferences (through Alt+Ctrl+Shift) and deleting the entire Adobe Illustrator CS6 Settings folder. I opened Illustrator again and moved some panels around to save a new AIPrefs folder but I was still unable to open any documents.
Then I tried the next step listed here:
http://forums.adobe.com/message/4687911#4687911
And removed the Printer that I usually use and it seems like that did the trick! Yay!

I cannot open any documents in Indesign after downloading Yosemite. Says I need Java 6. I have Java 8 and still doesn't work. Please suggest.

I cannot open any documents in InDesign after downloading Yosemite. Says I need Java 6. I have Java 8 and still doesn't open.

It may seem strange indeed, but yes, you have to ALSO install the older version 6 for Apple's system; other applications will use your Java (which I believe is now even 9) and others will use that version 6.
Download directly from Apple here:
Java for OS X 2014-001

Pages crashes when opening any document on iPad 3 Latest version. I could find on the net and finally deleted Pages from my device and reinstalled it. Still when I try to create anew document or open a document it just cr

Pages crashes when opening any document on iPad 3 Latest version. I tried everything I could find on the net and finally deleted Pages from my device and reinstalled it. Still when I try to create a new document or open a document it just crashes out.

Try this:
Make sure IOS is updated to latest version
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings

Pages doesn't open (iCloud) documents

Pages on my iMac doesn't open my documents stored in iCloud. However, I can drag documents from iCloud to my desktop, then open them with Pages and save them in iCloud. Then I can't open them again..
My Macbook Air doesn't have any problems, it just works
I tried deleting some .plist files and reinstalling Pages, but no luck.
I'm getting sick of this problem and it's ruining my productivity. I hope someone knows the solution to this problem.

I have Pages ’09 v4.3 on OS X 10.8.4.
I just created a new blank document in the beta iCloud Pages. I then launched Pages in OS X and opened some boiler-plate latin text in a local Pages document. I copied and pasted this from OS X to the open blank document in the beta iCloud Pages. Next, I opened the Media tool in Pages v4.3 and dragged an image from there onto the iCloud Pages document and dropped it. I was then able to resize and position it with latin text flowing around it.
As there is no save/save as... ability in the iCloud Pages beta, I clicked on the blank icon and it updated. I then clicked on the name and changed it from Blank to another name.
Back in Pages v4.3, I chose the open dialog and switched it to iCloud. There was the document that I had created with the beta iCloud Pages. I selected it and was immediately opened in Pages v4.3. Then, locally in Pages v4.3, I selected another image and dragged and resized it in Pages v4.3. I saved it and watched it immediately update in the beta iCloud Pages document panel.
I was able to create a PDF in beta iCloud Pages and email it to myself. I was able to download the Pages document created in beta iCloud to my hard drive without dragging and dropping it.
I do not appear to be having issues creating, interacting, saving, updating, or emailing content from beta iCloud Pages, or between my version of OS X Pages and the beta iCloud version.

ITunes doesn't open any more

My iTunes doesn't open any more all of a sudden, though Task Manager has listed it in "Processes". Quicktime and everything else works, though.
I've tried de-installing and re-installing serveral times.. Even older Versions (iTunes 10.5) won't work.
Can you tell me what to do?
Fyi: I'm using Windows 7 and iTunes version 10.7.
Thank you!

Let's try the following document:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

HELP!!! Can't open any documents from documents to go

Helo anyone can help me...
i can't open any documents (word, excel, jpeg etc)from documents to go it says: "there is no application to open this document"
what should i do....i've just deleted the documents to go from my Handheld cause i got frustated already...
so....what should i do now...?
please help me...
Message Edited by fachrul on 07-15-2008 11:47 AM
Message Edited by fachrul on 07-15-2008 11:48 AM

I am trying to open a pdf file through documents to go on my Centro (verizon). I received a this message: An unexpected error occured! Error number: 0x7371803.
What does this mean?
I saw on another thread there is a palm pdf software that works. I went to the site; it said this program is not compatitable with Centro. Has anyone else found a workaround or another program?
Hi, and welcome to the Palm Community Forums.
The error could be caused by the particular file you are trying to open, the way it was created, etc. Have you tried opening other .pdf documents?
Post relates to: Centro (AT&T)
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Office 2013 wixard runs every time in opening any document

HI when i open any document in office 2013 standred edition (Excel,WOrd, One Note) configuration wizard runs everytime , uninstalled office 2 times, did a fresh installation.
I have windows 8.1 64 bit operating system on my dell laptop

Hi,
Please start Command Prompt and try to type the following command, and then press
ENTER:
secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose
Please also try the other methods listed in this article:
http://support.microsoft.com/kb/2528748
(Note: although the link applies for Office 2010 the steps should also be good for Office 2013.)
Thanks,
Ethan Hua CHN
TechNet Community Support

APE8 doesn't open any projects anymore

My APE8 doesn't opene any projects anymore. In some cases it allows me to create a new project, but after shutting down the computer and restarting it the next day or so it cannot open the project I made th day before. As a matter of fact: it cannot open any project anymore.
After clicking to open the project a small window appears with a bar indicating the percentage the project has loaded. When the bar reaches 100% it disappears and nothing comes instead of it: the screen stays grey as shown in the screenshot.
There is a menu bar however.
In Adobe help and through Customer Support is searched for help as well. I worked my way throught 2 documents: http://kb2.adobe.com/cps/515/cpsid_51584.html and http://kb2.adobe.com/cps/515/cpsid_51552.html. I both did them step by step. including the removal and re-installation of the software. Nothing helped, the results stay the same: projects do not open, and the screen stays grey.
Can anybody help me?
With kind regards,
Laurens Swarte
the Netherlands.

Hi Neale,
Thank you for being there again...
I worked through your list:
Install all Windows Updates. (All updates are installed)
Install latest version of Apple QuickTime (v7.6.9 at time of writing). Even if you don't use QuickTime, PRE relies heavily on it. (I updated from 7.6.8 to 7.6.9)
•Install most recent graphics and sound drivers from the manufacturers web sites. (The most recent versions are installed: video: ATI Mobility Radeon HD 4670 V 8.631.0.0; sound ATI High Definition Audio Device V5.0.7000.4)
Free up at least 30GB, preferably 60GB disk space(130 GB available)
Run Disk Cleanup. (I did so)
Run Defragmenter. (I did so)
Temporarily disable any anti-virus realtime scanning. (I use McAfee, and it is kind of hard to find the 'switch'... I haven't been able to switch it off yet.)
Tonight, when I started my computer up, APE worked. After closing APE and using the IE I could no longer open my project.
Sometimes I feel as if it might have something to do with a memory issue. As if there is not enough memory. I use a Dell Studio XPS 16 with Windows 7 and 4 GB memory and 1920x1080 resolution.
With kind regards,
Laurens Swarte
the Netherlands

Pages 2.0.2 doesn't open Pages documents from ipad

Pages 2.0.2 doesn't open Pages documents from ipad 2. Document succesfully transferred as Pages document to computer, but Pages 2.0,2 wouldn;t open it. Version too old?

Pages 2 is iWork '06, two versions behind what the iOS Pages creates. You need to use Pages '09 which you can purchase from the Mac App Store as a stand-alone application or a retail box of the iWork '09 suite.

Whenever I try to open Microsoft Word it doesn't open and shows me an error report!

Whenever I try to open Microsoft Word it doesn't open and shows me an error report! I don't know what to do! Help!!!!
This is the extra info that comes along with the error report:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2013-08-30 16:41:14 -0400
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.1.0.110310
Crashed Module Name: MBURibbon
Crashed Module Version: 14.3.4.130416
Crashed Module Offset: 0x000072f0
Blame Module Name: MBURibbon
Blame Module Version: 14.3.4.130416
Blame Module Offset: 0x000072f0
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0
What should I do??????

It might be a good idea to also ask here:
Office for Mac forums

I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?

I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?

Dear Jean:
It sounds like you are trying to get your external monitor to act as the primary viewing screen. For example it would have your Doc, Icons, Etc. In order to make the external monitor the primary screen you have to:
Open System Preferences.
Choose the Displays Icon
There will be several tabs to choose from pick Arrangement
Drag the toolbar to desired display
Let me know if this helps at all!
Lance

Won't Open Any Documents

Hi all,
I'm pretty new to Illustrator and I'm currently using Illustrator CS6 v16.0.0 x32 on Windows 7. I'm having an issue where it's not letting me open any documents or basically use it... hence the long description:
When I load the program, everything looks okay. But when I go to File --> New (to create a new file, or even use one from a template) the program crashes. I get an error message that says: "Adobe Illustrator has stopped working - A problem caused the program to stop working correctly. Please close the program." This error has occurred even when opening existing .ai or .pdf files so I can't open anything at the moment.
Originally, v16.0.2 was working and then I installed the v16.0.3 update. I didn't use it for a few days after the update and then I created a new document but it started crashing and not saving. I was able to isolate it to at least changing rectangle colors. For example, I drew a box filled with red and saved the file. Then I drew another box filled with blue on the same artboard and when I went to save the file the program would crash. However, I was able to save when I drew multiple red boxes. But once I put a blue box, it wouldn't work. [I don't recall what the error message was, if there was one, since I now have a different issue where I can't open anything]
I wasn't exactly sure what was causing that so I thought I would uninstall Illustrator and install the v16.0.2 update to it and leave it at that for the moment. So I used the Windows Remove Program and removed Illustrator. I also at some point ran the Adobe Cleanup tool for removing trial versions just to have all my bases covered. I also removed anything else from Adobe that came with Illustrator (like Bridge, Reader, Acrobat, AIR, etc) just in case. Some of those programs probably did not come bundled with Illustrator.
I re-downloaded the files from Adobe (the Akamai Download Manager kept crashing so I had to do the regular download) and then I extracted them and ran it. It initialized the install and everything seemed to install fine, the same way I did it the first time. I put in the serial number, etc and then I was not able to open any documents. I ran the v16.0.2 update and had the same problem.
So then I uninstalled everything again and used the Adobe Download Manager to download the trial version of Illustrator CS6 and was not able to open any documents there either once it was installed. This leads me to believe it may be something specific to my computer or some setting somewhere?
Does anyone have any ideas?

Hi Myelenium,
Thanks for the info about Event Viewer!
It's showing this message:
Faulting application name: Illustrator.exe, version: 16.0.0.682, time stamp: 0x4f6e762b
Faulting module name: AGM.dll, version: 4.26.20.19822, time stamp: 0x4f56925c
Exception code: 0xc0000005
Fault offset: 0x0024ed0b
Faulting process id: 0x1a58
Faulting application start time: 0x01cddf8abaeab2fc
Faulting application path: C:\Program Files\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\Illustrator.exe
Faulting module path: C:\Program Files\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\AGM.dll
So I searched the forums for any previous AGM.dll posts and tried resetting the preferences (through Alt+Ctrl+Shift) and deleting the entire Adobe Illustrator CS6 Settings folder. I opened Illustrator again and moved some panels around to save a new AIPrefs folder but I was still unable to open any documents.
Then I tried the next step listed here:
http://forums.adobe.com/message/4687911#4687911
And removed the Printer that I usually use and it seems like that did the trick! Yay!

My email app. stopped working. It doesn't open any accounts

My email app. stopped working. It doesn't open any accounts. It used to but just opens up a blank screen. Any suggestions?
Also Safari doesn't open up anything either, but used to.

try restarting the app
Normally double tap the 'home' button
all the active apps will pop up at the bottom
hold an app
once the '-' symbol appears release then find the 'hung' apps by scrolling and click the '-' symbol
click the home key
then click on mail/safari and see if that helps

Word 2007 doesn't open any documents.

Similar Messages

Maybe you are looking for