Word PrintOutput Template Customizations

I looked through the various forums and did not see a post on
this, so I apologize if one already exists.
I would like to know if anyone has had any experience editing
the Microsoft Word Templates found in the PrintOutput folder of
Captivate 4? I have the document that shows all the tags and
describes them but when I try to implement the simplest of tag
structure it is causing Captivate to crash which tells me I am
doing something wrong.
Ideally, what I am trying to do is to update the Lesson
template so that the screenshot included is the same as the one in
the Storyboard template. If anyone could point me in the right
direction I would greatly appreciate it.
Thanks,
Chris

Hello,
Now I understand and I can see the logic. The variables get populated at runtime (in the SWF), either when previewing or after publishing. But you are exporting from the CP-file, that is not at runtime, it exports the captions as they are in the CP-file. For export/import Captions it is not a problem, because slides are identified. But I understand that this is a problem when exporting for handouts or something similar. On the image of the slide the variables are not populated, it is the image of the slide as it appears in the CP-file. Sorry, cannot help you, but thanks for clarifying your question.
Lilybiri

Similar Messages

Reseting page number in Word RTF template for BI Publisher PDF generation

Hi!
Apex 4.0.2, Oracle 10.2.0.4, BIP 10.2
Bills are created based on Word RTF file with BI Publisher. Reszulting file is one big PDF file, which has many pages.
Word RTF template is grouped on BILLS.ID field with page break option. So one BILLS.ID may have one or many pages (according data).
How to create RTF template (for PDF BI Publisher generation) with reseting page numbers when grouping value change.
Page numbers are in footer in format
curr_group_page/total_group_pages
where:
curr_group_page is current page number in group (defined with BILLS.ID field),
total_group_pages is total page number of pages in group (defined with BILLS.ID field).
I need to reset numbering whenever BILLS.ID (group) change.
Example:
ID=1 (4 pages)
1/4, 2/4, 3/4, 4/4
ID=2 (1 pages)
1/1
ID=3 (2 pages)
1/2, 2/2
ID=4 (3 pages)
1/3, 2/3, 3/3
etc.
How to achieve that kind of numbering?
Any help appreciated.
Regards,
Damir Vadas
Edited by: Damir Vadas on May 16, 2011 12:49 PM

Simple question.. Does your posting deal with an APEX issue or a BI Publisher issue? The posting you have deals with the RTF add-on for Word that builds report layouts for BI Publisher. I suggested in my response that you move it to a more relevant forum..
If you feel that me alerting you to the fact your are VIOLATING forum policy is an issue, please feel free to ask others their view.. (posting to a 3 year old closed thread, creating MULTIPLE threads for a single issue..) You do NOT seem to get the idea that posting this in the Bi Publisher support forum would probably get you a BETTER response than here.. Asking pl/sql questions here will also get people to refer your questions to the PL/Sql Support forum..
Also, here is a POSSIBLE answer from the BI Publisher Forum: http://forums.oracle.com/forums/thread.jspa?threadID=594805
This Is The APEX SUPPORT forum, we deal with SUPPORT questions on APEX (Application Express)..
Thank you,
Tony Miller
Webster, TX
You know, I used to think that it was awful that life was so unfair. Then I thought, wouldn't it be much worse if life were fair, and all the terrible things that happen to us come because we actually deserve them? So, now I take great comfort in the general hostility and unfairness of the universe.
If this question is answered, please mark the thread as closed and assign points where earned..

HT4168 I have created an 100 page booklet in Pages, with many photographs, can I export it to ePub, and make an electronic book, because it says that "Note: The Pages document must have been created using a word processing template"?

I have created an 100 page booklet in Pages, with many photographs, and much written word, can I export it to ePub, and make an electronic book, because it says that "Note: The Pages document must have been created using a word processing template"?....
Basically what I want to do is publish the document into both an eDocument, and a hard copy document. What is the best way to do this?

No Peter, this statement came right off the Apple ePub statement when outlining how to use ePub. the full context is:
Creating ePub files with Pages
Summary
Learn how to create ePub files with Pages.
Products Affected
Pages '09
ePub is an open ebook standard produced by the International Digital Publishing Forum. Pages ’09 lets you export your documents in ePub format for reading with iBooks on iPhone, iPad, or iPod touch.
iBooks supports both ePub and PDF file formats, and you can export both from Pages.
When to use ePub or PDF
Use ePub when text is the most important part of your document, for example when you create a book, a report, a paper, a thesis, or classroom reading material.
More details on using ePubUse PDF when layout is the most important part of your document, for example when you create a brochure, a flyer, or a manual with multiple illustrations.
More details on using PDF
Creating an ePub Document to Read in iBooks
You can export any Pages word processing document to the ePub file format for reading in an ePub reader, such as the iBooks application on the iPad, iPhone, or iPod touch. Documents created in page layout templates can’t be exported to the ePub format.
Documents exported to ePub format will look different than their Pages counterparts. If you want to get the best document fidelity between the Pages and ePub formats, style your Pages document with paragraph styles and other formatting attributes allowed in an ePub file. A sample document is provided on the Apple Support site that features styles and guidelines to help you create a Pages document that’s optimized for export to the ePub file format, which you can use as a template or a guide. To learn more about using paragraph styles in Pages, see the topics under the heading “Working with Styles” in the Pages built-in help.
To read your ePub document in iBooks on your mobile device, you must transfer the ePub file that you create onto your device.
To use the “ePub Best Practices” sample documentTo learn more about using the ePub format and get a better feel for how a Pages document might appear as a book in iBooks, it’s a good idea to download the “ePub Best Practices” sample document. After reading the guidelines and instructions within the document, you can use it as a template to create your own document. You can also import the styles from the sample document into a new document you create.
Download the “ePub Best Practices” sample document at the following web address:
http://images.apple.com/support/pages/docs/ePub_Best_Practices_EN.zip
Do either of the following:Use the sample document as a template.Import the paragraph styles from the sample document into a new or existing Pages document.
Export the document you create to ePub format to see how it looks in iBooks.
Preparing an existing Pages document for export to ePub format
Documents exported to the ePub format automatically appear with page breaks before every chapter. A table of contents is automatically generated, which allows readers to jump quickly to any chapter title, heading, or subheading in the book. In order to create a meaningful table of contents, it’s important to apply appropriate styles within your document. The ePub reader uses the paragraph styles to determine which items should appear in the table of contents for your book.
Note: The Pages document must have been created using a word processing template.

Read a .dot (MS Word Document Template) from jsp

Hi,
I have a link to a .dot (MS Word document Template file on the jsp page. While trying to access it from a link on the browser, the file is getting displayed in binary format.
If I try a normal word document or excel document, I am able to open/save the document.
I tried adding the following lines in the web.xml too with the same results.
<mime-mapping>
<extension>dot</extension>
<mime-type>application/msword</mime-type>
</mime-mapping>
and tried with this also
<mime-mapping>
<extension>dot</extension>
<mime-type>application/vnd.ms-word</mime-type>
</mime-mapping>
Can anybody help me on this ?
Thanks n advance, Sajiv

As you had directed, I tried a sample jsp with just
the link to the document. When I click on the link,
it allows me to open/save the document and the
default type it gives is with the extension.doc.
I am able to save the file as a .dot itself.
So, if this is coming from an application in a
server, is there any particular reason why it is not
functioning properly ?I don't fully understand if the problem is already solved or not?
When you mean by UserAgent, what do you actually
mean?An useragent is just a client application which can access network sources. In this case it is likely a web browser, for example Internet Explorer or Firefox. It might be useful to try as many useragents as possible so that you can exclude the useragent's default behaviour.

Word label template does not line up with avery 5160 8160 paper, Mac Maverick

Word label template does not line up using avery 5150 or 8160 paper

These forums are for Apple products and the best place to ask about problems with MS stuff is in there newsgroups:
http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups
When you don't see Post New Topic, it means you are not in a Forum but a Category page listing one or more Forums. You need then to enter a Forum by clicking on one. Then you will see the Post New Topic item at the top left.

Problem with OData Collection in Template Customization Web IDE

Hi Experts,
I created my simple service in SEGW and I try use it in the application created in SAP Web IDE.
I'm creating new project from menu File, New, Project from Template. I'm choosing SAP Fiori Master Detail Application giving a name of project.
I have a problem with step 3rd - Data Connection and 4th - Template Customization. I can easily select the system (which previously plugged) and the service, but in the next step I have problem. In step fourth I can't add OData Collection for Master or Detail Section.
In my opinion my system is connected properly, because other (any) services allows me to choose a Odate Collection - including those created by me alone in SEGW.
I'll add that service which allow to choose OData Collection was created using BAPI. Service which are posing the problem was created from DDIC Structure, but I don't know if it's relevant. Furthermore, all services created by me have implemented the methods GET_ENTITYSET and GET_ENTITY.
Can You help me?
Thanks in advance
Marcin

I make sure and my service returning metadata at
http://<destination>:<port>/sap/opu/odata/sap/ZXXX/$metadata
What's more, my service show data stored in collection dirrectly in browser at
http://<destination>:<port>/sap/opu/odata/sap/Z_Service_Name_XXX/Collection_Name_XXX
and in GW Client.

Pages hangs on opening any word processing template

Have re-created the problem consistently.
Deleted plists for pages and iwork from root level and user library preferences, deleted and re-installed the application a number of times. Any page layout template will open, but attempting to open any of the word processing templates causes the beachball to appear and I have to force quit pages. This, after having used the program quite extensively.

Who told you to
Deleted plists for pages and iwork from root level
They have no effect on the way the program behaves.
At this time, I have no idea about what may cause the described behavior for Word Processor documents.
Yvan KOENIG (from FRANCE samedi 25 octobre 2008 13:28:14)

How do I import Word 2007 Template (.dotx) into Pages '09?

How do I import a Word 2007 template? Is there a one step solution, or do I just need to open the template file and re-save it as a Pages template?

fruhalda,
What is the problem with opening your Word template in Pages and then save it as a Pages template. It is as direct as can be in my view. Remember it is two different applications here.
None, really, just ignorance on my part. It's the first version of iWork that I buy--and my first iMac, too--and I was expecting "Word-like" behavior, which I shouldn't. The applications target a different market segment--after using Word for 15 years Pages is a welcome improvement in usability for everyday documents. We'll see how it holds its ground to larger documents.
I'm glad that, paraphrasing Einstein, I think, it is "as compatible to Word as possible," but no more than only the necessary to import documents.
I may be getting Office 2008 to work around these incompatibilities while I get used to iWork--and there are some features that are simply not there. At least in the trial version I could verify that they have preserved the Windows shortcuts, which has allowed me to move on faster.
Kind regards,
--Javier

Pages hangs on attempting to load word processing templates

Anyone have any idea why Pages should hang whenever I try to load most word processing templates. Blank, Outlines and Miscellaneous all load fine, as do all the page layout templates. Letters, Envelopes, Forms and Resumes all just hang Pages. I have tried leaving the program for 30 minutes but no change and eventually have to Force Quit and start again.
I see there was a reference to this issue in 2008 with no apparent resolution but I am also assuming that was Pages '08?
I have updated to the version 4.0.3 (766) as well as reloading the whole of iWorks several times.
Very frustrating!

Welcome to Apple Discussions
Perhaps a font issue? You may have duplicates or not used the Mac OS 10.6.3 combo update.
There is also a possibility of corrupt Pages preferences (this is not fixed with reinstallation). Go to HD > Users > (your account) > Library > Preferences & delete the com.apple.iwork.pages.plist, empty the Trash & then restart Pages.

Wiki editing area too small after template customization

We have been working with a web developer for the last 2 months and he has
customized our wiki layout and provided the ability to order links manually
and to create static navigation links on the page menu using Javascript.
We are left with one bug we cannot fix:
When we go to edit a page in one of the wiki groups, the edit box sizes to a
maximum of about 200 pixels or 10 lines high and not the vertical height of
the entire content area as it does in the built in apple templates. This
makes editing text content difficult. Our developer thinks that the wiki is
looking for the div containers of the page to be in a specific order (which
we have changed in the customization) to set the height of the edit field.
We would like to know where we can get information on correcting this issue
so that the edit field fills the entire area when content or coding is being
changed?
Is there a file we can adjust or other method? CSS edits have not been
successful.

Allan wrote:
jelly wrote:actually i feel guilty, i haven't donated whatsoever, only free time on IRC , AUR , forums ..
That is a great way to contribute. I have never donated any money either.
+1
I think some of the "guilt" (stronger word than I really wanted) came from the fact that I couldn't donate as much time as I would have liked. Hopefully that will change more in the future, but either way it's all good, whatever you can donate. If everyone donated money and no time, that might be just as bad as everyone donating time and no money. I think the important thing is to contribute however you can so we can give back to this great distro and help to ensure it always keeps going.

Microsoft Word & Excel Permanently Customize Toolbars

How do I permanently customize my toolbars for Word and Excel? I have customized my toolbars for both Word and Excel by going to Tools, then Customize Toolbars but when I reboot my computer I lose the settings completely in Word (don't even have the option of choosing my customized toolbar under View), and I lose the Formula Bar in Excel (though I get it back by going to View and choosing Formula Bar) but I want ALL the customization I've made to the Toolbars to stay permanently. Any ideas? Thanks much.

When you customize the toolbar, it should remain changed if the normal template file is updated. And, that should update automatically whenever you make a change---obviously that's not happening.
So, open Word and go to Preferences---Save, and make sure that the Prompt to save changes to the Normal template (or something worded like that) is selected. Selecting that is not really necessary to save your changes, but sometimes it will prompt Word (Office 2004) to save the changes if there is a glitch in the system somewhere. Then make your changes to the toolbar, then go to Page Setup and click on default for the paper size---that will prompt Word to open the Normal template and accept your changes.
That should work--if not, post back and we'll see if we can't get this sorted out.
:))

How can I install a Word PC template on my Mac?

I work from home, editing manuscrips on my Mac Mini. A client sent me a manuscript in an earlier version of Word for the PC. I have Office 2011 with Word for the Mac. I was able to open the file with no problem, and saved it as a .doc file. The manuscript was embedded in a template, but the headers for it are grayed out. The client sent me the template separately. I was able to open it and convert it to .doc format. The macros in the template came up with no problem. The client tried to tell me how to install it. After numerous tries, I installed it manually as a global add-in, Using Tools>Templates and Add-Ins, and putting the template document in the Global Add-ins box. It came up as a .dot file and I clicked on it to make it active. But when I click OK, I get an error message telling me the file does not exist.
Arrrgh!
Now I've got numerous copies of the same file in the My Templates folder. I'd like to get rid of them, and start from scratch, but don't know how.
Then I'd like to get this template running on the document the client sent so I can make some money!
Help!

Hi, Kurt,
I thought you'd like to know that I successfully installed the templates on my PC with help from the client.
Then I used almost the same process to successfully install them on my Mac.
I found that I needed to not convert the files or open them beforehand, so I made a new folder on the desktop, named it, and copied the original files into it, preserving their .dot extensions.
I opened the Finder and dragged the folder into the Documents section. Then I opened the template file I needed and inserted the native manuscript file into it by clicking File, New, New from Templates. Then I chose the native ms. from the Recent Documents section, not the Templates section. I Saved it As a Word file using another name, and it came up with a docx extension.
Lesson: Never save a third-party template in the Mac's Templates section.
It worked! Just to test it, I sent the Mac file to the client, who was able to open it on his PC.

When add a people picker (user column) in Word document (Template) and try to add a name it stuck!

When add a people picker (user column) in Word document (un the document Template) and try to add a name it stuck!
Is it a known issue?
keren tsur

Hi,
According to your description, I have tested in my environment and I have the same behavior.
Only if you type the wrong name in the first time, then you click the phone book to search the right name and save, it will stuck. It means if you do other operation(e.g. type the wrong name then click “resolve” button, then search in the phone book) and
repeat the operation above, it won’t stuck.
It is appreciate that you can submit a feedback to Microsoft:
https://connect.microsoft.com/
Thanks,
Dean Wang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Can I protect my PDF form similar to a Microsoft Word protected template?

I have a PDF form that I created in Acrobat XI Pro.
I need to be able to enter data into the form fields and save that data under a new name, so I have enabled reader extensions for this.
When I create a form in Microsoft Word, I have the ability to save the form as a "template" file (with a .dotx filename extension). This is great because it protects my original form: When the user double-clicks to open the template form file, it only opens a COPY of the form, not the original.
Soo.... is there a way to do something similar to the Word template feature in Acrobat XI Pro?? It's a form, so I don't want to restrict my ability to edit it (add data to the form fields), and I have to be able to save the data under a new file name.
Any help would be great appreciated!!

You can set the file itself as read-only... But the users of it will always
be able to change it back, if they wanted to.
On Fri, Jul 18, 2014 at 10:16 PM, JessiRight <[email protected]>

Word document templates and Protection

We have implemented a Portal Solution for Sales Representatives, we allow them to create word documents by using a template, Once the template is filled by the data in the application we call the Execute Macro Method so that the Macro used to protect the word document is executed in word. This works perfectly in the SAPGUI, The document is protected after population of the variables
However, we have an issue in the portal, once the word document is loaded, the variables are filled with the data, the macro to protect the word document is not called.we understand that this call must be written, we would like some assistance with how to call the word macro when using the portal.
The underlying application is CRM.
Thanks Dion

Hello Dion,
I don't think that it's possible to get this functionality in the Portal. Has your company licensed the Adobe Document Service (ADS)? I think that would be a solution for your problem. I know a company where they use the ADS in combination with the PC-UI.
Regards
Gregor

Word PrintOutput Template Customizations

Similar Messages

Maybe you are looking for