Work bench request vs Customized request
Hi,
what is the difference between work bench request and customized request and also let me know types of requsts.
Thanks,
Sreedhar.V.
Hi Sreedhar,
Have a look at this
http://help.sap.com/saphelp_erp2005/helpdata/en/4b/b155e40c3e11d3959a00a0c930dcc1/frameset.htm
Transporting Customizing Settings
All system setting changes are put in project-specific change requests. You can transport the system settings into other SAP Systems with the change requests. The change requests are managed in the Transport Organizer.
There are two types of Customizing change requests:
Customizing request
Customizing requests contain changes to client-dependent tables.
Workbench request
Workbench requests contain changes to client-independent tables.
You can monitor the change requests by project in the project management. The Transport requests tab contains the following functions for the current client:
Activate CTS functionality
As prerequisite for creating change requests. When the CTS functionality is active, the pushbutton label changes to Display CTS project data. When the CTS project is finished, the pushbutton label changes to Reactivate CTS functionality.
Assigned CTS requests
Go to Transport Organizer request overview, where you can create requests for a project.
CTS project object list
The project object list is unchanged. When the customizing project is finished, the complete object list can be exported.
CTS project status switch
Sets the project status switch.
End CTS project
End your customizing project. You can reactivate it later.
See transport control by project for further information about the Change and Transport System (CTS) for customizing projects.
http://help.sap.com/saphelp_erp2005/helpdata/en/09/88f330db9911d2b41a00609419f767/frameset.htm
Reward if it helps
Regards,
Deepu.K
Similar Messages
-
Difference between work bench request and customizing request
in abap point of view please give me the difference between work bench request and customizing request
In simple terms -
Work bench Request is used by ABAPer.(Creatation of Programs, TCodes or ABAP Dictionary Objects)
Customizing Request is used by Functional Consultants. (Used to configure the system as per clients Business requirements).
The Change Request is that request when you do some thing new in customizing or configuration in the system. The system will automatically pop with the change request pop box , when you can give request name as defined by the system or can give your own request name with heading of what changes you have made while customization. The system will generate a request number and you save it. (e.g.:- VEDK-2785467) VEDK- means the Clients System name then followed by the system generated request number.
Now when you want to release the request you have to use the T-code SE10 where you can see the requests under the heading modifiable or released. Go to the modifiable option. Each request will have again an internal request number. First you have to release the internal request and then release the external request number. This will in turn released by the basis guys thru the T-code SM64 in a group when all the requests are pooled from different users.
The task which you have mentioned in your question is nothing but the what task you have performed while customizing the client system and the heading name which have given it for that task and generated a request for that task.
Change Request Management ...
http://help.sap.com/saphelp_nw04/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Creating Change Request Management
http://help.sap.com/saphelp_nw04/helpdata/en/42/157408dd674a9cbc099f634e9bd069/content.htm
Change Request
http://help.sap.com/erp2005_ehp_02/helpdata/en/e5/e5bc42348a43fba6f1b390fc8c4b36/frameset.htm
Customizing Request:- which will be used when any customization changes are doing.
Example:- In your standard Tcode always you cannot find all the fields or options, if you want to enable/disable some fields, in this case it will be treated as Customizing request, any customization will comes under this.
Work Bench Request:- for new developments like new reports, BDC....etc, then Work Bench Request will be used.
Reward if useful. -
What is "prompt for local work bench request"?
Hi..I am new to SAP BI.Just now I started Practicals on BI.I am creating Info Area,after giving the technical name and long description for the info area,it is showing another window as "prompt for local work bench request"and asking "workbench request".what does it mean?why it is not creating the info area??
Can anyone suggest me?
Thanks & Regards.Hi,
Seems like your working on ideas version.
that prompt was pop up due to the standard transport procedure.
When we work on real systems, all newly created or changed objects need to capture into transport and need to move across the landscape(Dev-->quality-->prod).
You can turn off standard transport procedure.
log into BW, RSA1-->transport connection,
From Menu Edit--->transport--> switch off standard.
Thanks -
SE 63 WOrk bench Request Creation
Hi Gurus,
I have translated XD02-Search help information from EN to German langauge.
It has translated successfully.It is working properly in the development.
Now i need to move it into Development.Can any one help me how to create a work bench request
for these search helps which were translated through SE63.
Thanks in advance.
Regards,
Vinay.Thankyou for your reply.
But i have done that.
More over your answer is not working .
I think that will work out only for scripts.
I have done the searching part then only posted. -
Difference between work bench request and transport of copies
hi-- what is the difference between wrokbench request and transport of copies. when it comes to overwrite originals etc. thanks
i am transporting from production to development and i need to make transport of copies of that workbench request, why i need to do this?Workbench request - created in the 'source system' where the object was first created. Each object has a 'source system' attribute (table TADIR).
Copies - When transporting from a system other than the 'source system'.
The basic idea is that the 'source system' is the place where an object shall be changed (using a workbench request), while copies can be moved from other systems as well. You can ofcourse override this check. -
Transport bench request creation
Hi Guys,
i am actually trying to copy a company code from 0001 to my own company code, and on the next screen I am not able to create a new work bench request, but when I select the default project and my user in the screen, I am not able to successfully complete the transaction, please help me what to do guys.
steps:
1.sapimg
2.enterprise structure
3.definition
4.edit/copy CC
5.copy CC
6.new transport reuest
7. not going ahead of this screen
This is very urgent requirement for me.
regards,
sudhir.Thankyou for your reply.
But i have done that.
More over your answer is not working .
I think that will work out only for scripts.
I have done the searching part then only posted. -
So where we see the status of this work order request
Hi All,
I have submitted work order WO00034931 in SAP for a new vendor address but it seems my approver (Andre Vabre) never received it. In SAP, its status is Submitted for Approval.
So where we see the status of this work order request
Thanks,
KumarHi
You can make the price of a variant dependent on the characteristic values assigned (Pricing).You can use
variant conditions to define surcharges and discounts for a variant
Variant u2013Pricing steps
Create condition record
create a procedure where you enter the reference from the characteristic
Assign the procedures to either the characteristic values
configure the material in the sales order
The net price for the material is displayed
If a value that triggers a variant condition is selected when configuring a material in a sales order, the price of the material displayed under Net value is automatically increased or reduced.
In addition, the Conditions pushbutton is displayed.
On pressing this pushbutton,
One can see which conditions have
influenced the price.
I tried to list you as much detail as possible. Hope that you will be able to resolve your issue
Thanks -
Please clear my following doubt regarding TR (customizing / work bench).
Dear experts,
Greetings,
Please clear my following doubt regarding TR (customizing / work bench).
TR can be created for Either its customizing or work bench ?
Both need to release in order to get it in another client?
If different client are in one server, then in that case release is required or not. Or simply I can copy it using T.Code SCC1 in the target client.
Thanks & Regards,
M S AnsariHi,
Depends, are you using ChaRM? Then the TOC would suffice.
Please speak to BASIS person, he would provide you more insights.
Hope it Helps!
Thanks and Regards,
Varshal Kachole -
Void multiple PY checks not through off cycle work bench
Hello,
We had a scenario where we had to void nearly 60 regular PY checks in our previous period. The postings to FI did not happen yet. We went to off cycle work bench and voided 60 checks one after the other.
Is there any quicker way to void multiple PY checks (If we know the check number to void). What if we run into a scenario where we need to void few hundreds.
Any advice is greatly appreciated.Hi Priya,
I feel you have got answer of this query.... as it was processed through another thread. I will request you to close this thread as for a question 2 threads are there. And if moderator will see it then they may block the thread.
- Praveen -
How to check IE error in Runtime work bench.
scenario: File to File
*file moves from sender to archive folder when i start sender cc in runtime work bench but file doesn't move from archive to receiver folder when i start receiver cc in runtime workbench and i think some thing wrong in IE so can anyone help me for the same.i'm fresher so give me your solution as simple as possible.
Thanks to u.
Edited by: manikandansit on Jun 29, 2010 10:41 AMbelow error am getting
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
Display Stack Trace
Stack trace for the above error message is:
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:328)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at jsp_FC_Secure1212318130512._jspService(jsp_FC_Secure1212318130512.java:24)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NullPointerException
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doProcessAfterInput(CmDynPage.java:60)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:101)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
... 20 more
Wait...
Query being processed -
ON Deman Payroll Run through off-cycle work bench
Dear Gurus,
I am using Off-cycle payroll On DEMAND REGULAR payroll run through off-cycle work bench with the help of T-Code PU0C_99. Now i have given payments in IT0267 (OFF CYCLE INFOTYPE) but i am observing that P0267 function is removing all the components in the output table. If i see the INPUT table of the function then I can able to see my components but in the OUTPUT table function is removing the components.
My doubts are
1. Is it because it is ONDEMAND Regular payroll run function is reading the payroll type (A)and removing it from OUTPUT table?
2. If I processed the is ONDEMAND Regular LIVE payroll run then for posting to accounting program do I need to enter anything in the selection screen?
3. Presently I am not entering anything system is picking the latest payroll results and posting the corresponding entries?
Thanks & Regards
Priya LathaHi Priya,
I feel you have got answer of this query.... as it was processed through another thread. I will request you to close this thread as for a question 2 threads are there. And if moderator will see it then they may block the thread.
- Praveen -
Implementing F4 Help functionality of ABAP work bench on Adobe form
Hi ,
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/c8a3ccc84e136ee10000000a1553f7/frameset.htm
Above link gives following description about Web Dynpro Form UI Element ValueHelpDropDownList
<b>ValueHelpDropDownList contains the script that is required for the link to the server in order to retain the elements of the list field from the back end at runtime. This Library object enables the end user to set up an input help request to the SAP server. This request always works in online mode, but not in offline mode. A server-side update of the input help is possible.</b>
Please explain me how ValueHelpDropDownList UI Element works .
Please correct my understanding -
We use a RFC adaptive model BAPI to retrive data from R/3 system and bind the variable to ValueHelpDropDownList UI Element . This means we get the data from backend in intialization of PDF form ( It means it is one time activity which will be used to extract data from R/3 system to display to end user ).
Is there any alternative by which we can get data from R/3 system ( some thing similar to F4 help in ABAP work bench ).
Please let me know if any one implemented this functionality .
Regards,
NandaHi Ankit,
Thanks for a reply. Could you please explain the details? I am mapping a context attribute to the whole column and the value help button besides the field.
Thanks
Samatha. -
I am not able to login to demantra collaborator work bench
Hi,
I am not able to login to demantra collaborator work bench. i tried with default username, pwd dm/dm and custom username passwords. None of the user names are working. Any help in this regard is very much appreciated.
Thanks and Rgds,
Raghu
Edited by: user1127487 on Mar 23, 2010 2:38 AMRefer the following,
http://balajiabhi.blogspot.com/2009/02/demantra-issues-and-troubleshooting.html
Standalone Demantra Installation -
AME with Comp work bench?
Hi all,
We are implementing comp work bench and our heirarchy is not based on supervisor and Position. We have a custom table based on Assignment level EIT that derives the heirarchy.
We are trying to use the AME and integrate it to CWB. Should we create a custom transaction type or are there any existing transaction types that we could use?
Can some one please guide us.
Thank youHi,
create a new user id with the following roles and then you will be able to use End to End Monitoring, Alert Configuration and Alert Inbox.
SAP_XI_MONITOR
SAP_XI_DISPLAY_USER
SAP_XI_DEVELOPER
cheers,
Naveen -
Oracle Work Bench - MS SQL to Oracle
Hi,
I am using oracle work bench for migrating MS SQL database to Oracle 8i. When i am trying to migrate the Stored procedures with cursors, i am get expections. I am able to migrate tables and SPs (which don't have any cursors in it). I will cite an example for better understanding. Assuming the following is SP in MS SQL
create or replace procedure test1
@id varchar(20)
as
declare @cur1 cursor
if @id = '1' then
begin
set @cur1 = cursor scroll KeySet for
select test1 from table_test
end
else
begin
set @cur1 = cursor scroll keyset for
select test3 from table_test2
end
open @cur1
close @cur1
deallocate @cur1
/* END OF PROCEDURE */
When i try to parse it using Oracle Workbench, i am getting the following exception in log.
"Error occured at line 4: OracleWorkBench.sa.test1; oracle.mtg.sqlserver7.parser.ParseException: Parse error at line 4. Encountered: Declare"
Any help is greatly appreciated.Sadigue,
The Workbench uses an underlying repository, so all the choices you make are saved. However the primary usage of the tool, is one off migration, not continous migration. If you want to rerun multiple times, you should probably generate the offline schema and data migration scripts.
Donal
Maybe you are looking for
-
Watches/Notifications vs. JMS Delivery Failures
Hi there, I'm trying to configure an automatic email notification (using a custom WL diagnostic module) for all unexpected errors taking place at the level of my application server. For most errors, this seems to work just fine. Unfortunately, JMS de
-
Which power adaptor cable?
Hi..I have a BT Relate 2100 home phone and the dog has chewed the power adaptor cable. Can I purchase any telephone power adaptor cable that has a RJ11 connector on one end and a 3 pin adaptor on the other as I can't find one exactly for the BT Rela
-
New N73 ME 4.0727.2.2.1 doesn't fix GPS problems
I have updated to this new firmware looking forward to see the problems with GPS bluetooth solved, but the problem is still there. Tomtom doesn't find any GPS receiver.
-
i downloaded firefox 4, what a mess cant get to some websites, made a mess of bookmarks and cant add new bookmarks. what has happened.
-
Where do widgets go when downloaded
have just downloaded a widget off the apple more widgets site and can not find it. Where do they go?