Work Center determination depending on vendor/supplier

Hi together,
is there a possibility in SAP QM Standard
to determine the workcenter for the resultrecording of specific Operation/Activity
depending on the supplier?
at the moment it's only possible for me to determine work center of the inspection operation (field: VORNR) depending on plant and material via inspection plan
thanks for help
br
Sven

for one material in one plant we sometimes do the inspection in Work center A, sometimes the inspection takes place in Work center B.
In order to select the operations to inspect, you enter QE51N, enter plant, material and work center.
As the place where the inspection takes place is dependant on the supplier, i'd like to know how to control that if there is a goods receipt of supplier 4711 to do the inspection at Work Center A, and if goods are coming from 9977 to do the inspection at Work Center B.
i saw the posibility to maintain the vendor in the inspection plan - but only maintaining the vendor does not solve my initial question :-)
this is how the inspection plan looks like.
Inspection Plan XY
      - Material 123 - Supplier 4711
          - Operation 1 - Workcenter A
          - Operation 2 - Workcenter A
i tried to maintain another supplier- matnr relation on the plan, but still both operations are valid for this combination
Inspection Plan XY
     - Material 123 - Supplier 4711
     - Material 123 - Supplier 9977
          - Operation 1 - Workcenter A <---
          - Operation 2 - Workcenter A <--- the operations are valid for all material - supplier relations in the inspection plan?

Similar Messages

Error in profit center determination for settled vendor down payments

Hello All,
When we try to settle vendor down payments an error is detected for the profit center determination .
The settled down payment is found on the dummy profit center instead of the profit center of the original invoice. This means that the reporting of oustanding payables per profit center is wrong
When you only see the invoice and not the settled down payment which should reduce you outstanding debt (down payment already paid).
Can any one help in this matter
Regards
Arun

Hi,
Check the document splitting configuration. Advances to vendors recon.. account should be assigned as category 'Vendor 'special gl transaction''.
Check the document type 'KA' transaction as '0300'... or unspecified posting.
Thanks,
padmaja N

Work center determination

Hi Experts,
Our warehouse is having different VAS activities.
say VAS A, VAS B, VAS C.
They always perform VAS A and VAS B in workcenter 1 and VAS C in workcenter 2.
Product X has VAS activities VAS A + VAS B in work center 1
Product Y has VAS activity VAS C in work center 2.
But for Product Z has VAS activities VAS A + VAS B + VAS C needs to be performed. In this case client needs to perform all VAS activities in work center 1 only. Third VAS activity also needs to be performed in work center 1 only not in work center 2.
how to map this requirement?

Hi Steve,
Can you tell me how you are going to select which vas activity you are going to select.
means product base or customer base or some indicator base.
Our warehouse is having different VAS activities.
Say VAS A, VAS B, VAS C.
They always perform VAS A and VAS B in workcenter 1 and VAS C in workcenter 2.
Product X has VAS activities VAS A + VAS B in work center 1
Product Y has VAS activity VAS C in work center 2.
But for Product Z has VAS activities VAS A + VAS B + VAS C needs to be performed. In this case client needs to perform all VAS activities in work center 1 only. Third VAS activity also needs to be performed in work center 1 only not in work center 2.
Regards
suraj

Read Routing and work center details from transfer order

Hello
I am using transaction LT31 to print a form for the transfer order.
The customer wants me to print a field that is in the work center details of the routing for this material and plant.
I can see this data with transaction CA02 where i enter material and plant,and then the work centers are beeing displayed.From here i can double click on the work center and see the field Supply area that i have to print.
My answer now is,how to read details on the work center starting from my transfer order number.Which is the table connection between transfer order table LTAK and the tables where i can find the work center details.
Thank you

I have found the solution:
ltak-tanum = mseg-tbnum
read aufnr from mseg and go to afko
mseg-aufnr = afko-aufnr
read plnnr from afko and go to plpo
afko-plnnr = plpo-plnnr
from plpo read arbid and go to crhd
plpo-arbid = crhd-objid
from here,we can find the arbpl and the field that i was looking for PRVBE

MSS Requisition in Recruiters Work Center??

Hi All,
We created Requistion in MSS by selecting the 'Create Requistion form' as a Hiring Manager and this same Manager want to view the created requistion in recruiters work center as a recruiuter.
Here user has two roles as - Manager and Recruiter.
How can we view the MSS Requistion in Recruiters page.
Please can anyone clarify on this!!
Thanks,
Asha.

Hello Asha,
could you check the following points in the e-recruiting system and give a feedback to the result?
- is the requisition actually created? The requisition request form is a kind of buffer. Only when it is properly approved and processed a requisition is created in the e-recruiting system. Best check table HRP5125 for your requisition title.
- which is the status of the requisition? This can be found in the same table and efines in which of the work sets it can basically appear.
- is the person you are testing with assigned to the requisition in role recruiter (id 0007) and does this record has the lead fleg set? This can be checked in table HRP5131. Only if the person is a member of the recruiting team the requisition will be displayed in the work center. Depending on the lead flag it will be displayd in "My ...." workset or in the "... of team" worksets.
- Have you refreshed the workcenter? This is not happening automatically. Be sure to refresh all worksets and not only the selected one.
Kind Regards
Roman

Work center capacity or WT generic

Dear All
Is it possible to have Work center determination based on Bin capacity ,
if not then as second option
Is it possible to have WT generic for work center determination where in the picker based on the available work center will enter the bin and confirm the task.
Please confirm with the storage type settings/role to accomplish the above..
regards
Saravana

Hi
Request you guys to validate the Work center functionality summarized below and provide your feedback/clarification if any.
Case 1: User decides on the bin during confirmation
It is realized through POSC setting for OB02 ,,either having storage type or type and section without bin.
Open Points:
WT generic setting at storage type doesn't need to be generic ( values 1 and 2) , It can still remain as not generic (=with Bin)
It doesn't work based on work center determination setting(/SCWM/PACKSTDT) and having rule based checked at POSC..
Case 2: User will drop the picked items in common work center
It is done by having common Inbound section shared between multiple work centers and then the pack center user drags and drops the items/HU from common bin to working bin .. If required there can be an additional bin to reflect the completed work.
Case 3: Based on consolidation group
It is achieved by having Consolidation group as Put away rule and work center determination based on consolidation group.(/SCWM/PACKSTDT)
System dynamically determines the bin per consolidation group.
Open Points:
If there is no work center available during picking for a particular consolidation group ( means all available work center are occupied with different consolidation groups) then surprisingly the pick is directed to staging area ( Is this expected behavior??)
Case 4: Work center determination Based on Remaining capacity
BADI Development..
Thanks Juergen for your inputs ,, Now i am convinced with the validation( error message) at storage type configuration of having both storage type role E and capacity check active..
regards
Saravana

Work center in material determination of DIP profile

Hello,
the source of our DIP-Profile is 0001 Acutal costs - line items.
We have the requirement to use the work center in material determination as criteria.
But in DP90 we get material determination error.
The issue is that in the failed combination no work center is available.
Why can´t the DIP find the workcenter we used in the service confirmation?
Thank you
Kind regards
Manfred

Hello,
after above setting have tried this in ODP1
select The Work Center in Chr.then >select Source on left hand side ->Select the Actual cost Line Item>select Material determination-->Select Material for which Transfer Cost and Quantity -->Marked the Check Box Material determination and Individual
Also please let me know Which Control Key you are using in service order??????
Regards,
Rakesh
Edited by: RAKESH ASHOK MANE on Sep 9, 2010 3:16 PM

Vendors work center

Dear all,
there is a requirement, where when planning is done based on a sales order delivery date. the system should plan based on the available capacity in house. the requirement is the system should automatically propose how much of work should be offloaded to vendor to meet the customers delivery date. Is this functionality available in PPDS. Pls guide.
Thanks
Vinay

Hi Vinay,
To meet this requirement in PPDS, you need to define vendor as a separate location in APO. Separate
work centers and capacity also to be maintained.
You need to carry out finite capacity planning in PPDS using bottleneck resources. You need to set
priorities in modes either PDS/PPM for normal resources so that it will get loaded first.
After the normal resources are loaded, the excess load will be given to vendor resources.
Regards
R. Senthil Mareeswaran.

Errror : production supply area not available fieldin work center .

HI
   hi friends
        i want to maintain production supply area in work centre...
        production supply area means storage location??
      i have a confusion between storage location and production supply area
pls suggest me where i missed the setting
with regards
dinesh

Production supply area is not a storage location. It is linked to one, but you may have more than one supply area per storage location.
Supply areas are used in KANBAN processes, and I think that also in WM-PP interface.

Work center capacity header freezed

Dear Gurus,
we're not able to edit the work center capacity header. not able to edit the start and finish times.
it is happening only for one work center. in other work centers same capacity category is editable.
Please help us in resolving this.
Regards,
Gowri

Hi,
Check your work center categeroy definition for which edit is not possible.
The work center category determines which data can be maintained in a work center.
Each work center category is assigned to the applications (for example, production, plant maintenance or quality management) whose menus allow you to maintain work centers with this category.
Each work center category has a number of screens assigned to it which the system displays when work centers of this category are displayed. The screens contain groups of fields (for example, scheduling data). Depending on the work center category, you can make field selections on these screens (for example, defining required entry fields).
Thanks,
nandha

Work Center update during work order save (SAP PM) using exit IWO10009

Hi All,
I am updating the work center in the operation record of a work order using exit IWO1009. In the debug, the internal table for operation is updated successfully. But once the processing is done and I see the order though t-code IW33, I couldn't see the updated workcenter. And surprisingly, plant field which I am updating with work center, is getting updated in the operation and I can see this in IW33.
Pls help.
Thanks,
Bhaskar

Here is the code:
    REFRESH : lt_afvgd.
Getting Operation details
    CALL FUNCTION 'CO_BO_OPR_OF_ORDER_GET'
      EXPORTING
        aufnr_imp = caufvd_imp-aufnr
      TABLES
        afvgd_get = lt_afvgd.
    IF caufvd_imp-AUART = lc_auart1 or caufvd_imp-AUART = lc_auart2 .
Determination of Work Centre for Operation Relevent To PTE Eng.
      CLEAR : ls_afvgd.
      READ TABLE lt_afvgd INTO ls_afvgd WITH KEY usr00 = 'PTE'.
      IF sy-subrc eq 0.
        ls_afvgd-arbpl = caufvd_imp-VAPLZ.
        ls_afvgd-WERKS = caufvd_imp-VAWRK.
        MODIFY lt_afvgd FROM ls_afvgd TRANSPORTING arbpl WERKS WHERE usr00 = 'PTE'.
      ENDIF.
    endif.
**-- Updating operations buffer
    CALL FUNCTION 'CO_BO_UPDATE_OPR_OF_ORDER'
      TABLES
        afvgd_upd = lt_afvgd.

IW41: automatic update of activity type when changing the work center?

Hello colleagues,
when doing a time confirmation with IW41, we have following problem:
In the PM order the operations are assigned to a neutral executing work center, as it not known which individual technician is completing the operation later on.
Now when the individual technician is entering the time confirmation with IW41, system is proposing the work center indicated in the operation from the PM order, then technician is overwriting the work center proposal with his own individual work center ID (and pressing Enter), but the activity type is not getting updated automatically. So the technician must jump to field "activity type" and choose the correct activity type.
Is there any solution (hopefully with user exits!) to have the field "activity type" automatically updated with the one indicated in the work center, which was entered manually?
Thanks for your ideas!
Regards,
Patrick

Hi Maheswaran,
yes, as usual all PM work centers have only 1 activity type assigned in the costing tab.
We also checked the settings of the activity type (KL03), but we just found one difference: the price indicator was set on 3 "Determined manually" - we've changed to 1 "Plan price, automatically based on activity" (..same setting as for the act. type of the work center with working update of act.type).
We tested already all possible constellations and scenarios, but we have not found any good reason for the behaviour.
Thanks for your efforts so far!
Patrick

Controlling - Cost Center Determination Problem - MM

Hi everyone,
I have a problem concerning Cost Center determination.
My Valuation Area is company code and I use division in order to input to diferent Plants.
I filled all the fields on the OMJ7 transaction.
I also filled all the data in the OKB9 transaction.
The problem appears while posting a Goods Receipt: When a goods receipt is posted, the system just picks the Cost Center informed in the "Valuation Area - Division" and not in the "Plant-Division" of transaction OMJ7.
The data informed in the "Plant-Division" part is working fine in SD, but during GR it does not work and it gets the data in the "Valuation Area - Division" part.
Does anyone can tell me how to make it work the same way in SD and in MM ?
Thanks in advance !
Best regards,
Remi

In OMJ7, there are two linksto maintain the values:
1. Plant - Division (T134G)
2. Valuation Area- Division (T134H)
Both of these refer to two different tables (in brackets above).
SD transactions read the G table and MM transactions read the H table. Hence you need to maintain the settings in both tables.
In my situation, though the plant is the Val area, I had to maintain the entries in both tables.
Cheers.

Profit Center in Customer and Vendor Line item

Hello Guru
i have one doubt we have activated the new GL in one of client for profit center level. while posting through any of financial transaction particularly customer and vendor there is no filed for input parameters for profit center. while booking these kind of transaction system pick up the dummy profit center. even our field status group for gl master data and posting key made as optional PCA filed not displaying. client want it should be pick up automatically from line item and should be input parameters.
how to resolve this issue please let me know.
waiting for your reply
Thanks & Regards
Laxmi narayan

Hi,
You are saying that u have activated New G/L, but are u gone for document spliting also or not? if you have activated document spliting customer and vendor line items not at all required any profit center because it will petch the profit center from oppsite line item automatically for giving tallyed balance sheet at profit center leavel, so no question profit center required or going to dummy profit center because dummy profit center will be locked automatcially once u activate document spliting.
if you have not activated document spliting then customer and vendor line items may require profit center its depends on your field status settings, if you feel that it should not go to dummy profit center then maintain some profit center in 3keh & 3kei settings for customer and vendor reconcliation accounts, so that it will post to that profit center.
Thanks & Regards
T N R

URGENT........ACTIVITY TYPE AND THEIR ASSIGNEMENT TO WORK CENTER!!!!!!!!!!!

Hi Friends,
I have A REAL URGENT REQUIREMENT as far as activity type and assignment to Work Center is concerned.
I work for a client who is a manufacturer of Paint equipment. I'm responsible for capturing the cost of an assembly activity of spray guns, which is the last step of routing. However, there are 4 processes/steps of routing which are outsourced to the subcontracting vendors. we recieve the facbricated, anodised guns which are assembled in our factory.
I need to get the cost of assembly, which I have created as an actvity type in KL01 and planned for the same using KP26. However the system is throwing up errors related to costing, and I'm not sure about the assignment areas in work center.
And above all I'm not sure of various fields in KP26 like capacity field and what do we assign.
can anybody help me with the series of steps for me to be able to pick up the cost. or if there is any sort of material in this regards, plz mail it to: __ email removed by moderator
regards
sandhya

Hi,
You need to do the following:
1) Create an Activity type for the Assembly activity.
2) Define a Work Centre in PP (T-Code CR01) which represents the location where the Assembly is carried out.
3) Define a Cost Centre corresponding to the above Work Centre.
4) Plan for the Activity quantity for the combination of the Cost Centre and Activity type (KP26)
5) Plan for the Overhead Costs which are incurred on this Cost Centre which need to be included in the Standard cost of the Assembly.(KP06)
6) Assign the Cost centre & Acivity type to the Work Centre in CR02.(This is possible only after you do 5 above)
7) Execute the Plan price calculation (T-code KSPI)
After you do all of the above, when you do the Costing Run, all the relevant costs will be picked.
Ofcourse all the relevant master data for PP like BOM, Routing with the relevant assignments of materials to operations, etc should be in place.
Regards,
Assign points if useful

Work Center determination depending on vendor/supplier

Similar Messages

Maybe you are looking for