Work Center not appearing in CM25 display

Hi All,
We have three work centers assigned to three consecutive operations in a planned order of plant XX. We have a Z (modifed version of SAPCRPG001)overall profile in CM25 with the initial selection screen where we give plant XX as the input and execute the transaction. In the output we are able to see only the data of the first workcenter whereas the other 2 doesnt appear at all.
However when viewing the same in standard profile SAPCRPG001, we are able to see the data for all the three work centers. (Red Bar graphical view)
We are unable to find out how Z profile is restricting the 2 work centers from getting displayed in CM25 output for a given planned order.
I have compared the first work center with the other 2 and could confirm that there is no any change at work center level.
What could be the issue ?
Thank you

Hi Brahmankar & Dimas,
Thank you for the above message. We have checked the above settings and observed that it is for selection screen setup. However i would like to clarify once again the actual issue, that i am facing.
I have 3 work centers in a process order (as shown in attached image 1)
. Each have different operation time. When i view this order in CM25 using standard profile SAPCRPG001, i am able to see three workcenters with respective loads along with the red bars in the graphical view (as shown in attached image 2).
Now, when i use the Z profile instead of standard SAP profile, I am able to see only one work center with its load and corresponding red bar in the graphical view (as shown in attached image 3). I am fine with seeing only one work center, but i would like see the cumulative load of all the three work centers against this work center i.e the red bar should be longer and euqivalent to the sum of loads of the three work centers.
I have explained the same in the attachment file with relevant screen shots. Please advice.
Image1
Image2
Image3

Similar Messages

Why do presenter notes appear on both displays?

On previous presentations I have used presenter notes successfully, but this time they are appearing on both displays or neither. What am I doing wrong please?

Many thanks, Gary.
I do have Mac 10.6. I followed your link to Mirror Displays in Snow Leopard and then to Mac Help on "Displays".
The solution is that the "Arrangments" tab only appears when the projector or second display is actually connected to the computer. So now I have unselected Mirror setting and all works fine. (Its a mystery how it got set since last year, but that doesn't matter.)
Because of the layout here, when I am connected to (cable) internet I am out of reach of the projector, so did not discover the solution earlier. Thanks again.

Safari app not working, webpage not appearing and unresponsive. Calling all iphone 5 experts for help!!!!!!

Hi, need help. Safari app working fine until just now. Webpage not appearing and when trying to open the app, its a white page. Like you see pages, bookmark, the search tab, but when trying to press any of the buttons, it is unresponsive. When i try to go to setting to see if the problem can be fix, my safari setting isn't open either. I try going to icloud and try to turn off and on the safari data, in hopes that it would work. Nothing. I have done reseting network, and currently resetting all setting to see if this will work. I also did a soft restart, hard restart, turn on and off the phone multiple times. All other apps are responsive but safari. My itunes won't let me sync my phone and in order for me to do that, i would have to reset phone to factory setting, which would be a last option for me.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
No data is lost due to a reset.

Excise tab not appearing in GR display

Hi,
After creating the Goods reciept, when we display the GR document the excise tab is not appearing. While creating only the excise tab appears and can enter all the excise details. But if want check the values entered in the display mode of the GR, we tab does not appear.
Please let me know if any customising setting needs to be done so that this tab will appear in display mode also. We are on ECC 6
Thanks,
SR

Hi,
As per my understanding ......
While Doing MIGO, Excise Tab appear at header level in Excise Tab and also at Item Level.
But when u post part1 only, then Excise Entries also found there.
But after posting Part1 in MIGO and Part2 in J1IEX,
while going to back MIGO Document, Exicse Does not appear there becoz u post only part1 not part2.
u can observe there entries like this
During GR
                                    Material Stock            Dr.
                                    GR/IR clearing                        Cr.
During Excise Invoice Credit
                                    Cenvat Account          Dr.
                                    Cenvat Clearing                     Cr.
Hope Clear U !
Regards,
Pardeep Malik

Profit center not appearing in Noted Items

Hi
I created one noted item for customer bank guarantees. Now we give this bank guarantee profit center wise (location-wise).
Now i want to see profit center-wise bank guarantees given. How to see.
My issues: Profit center field is not appearing in F-49 (Post customer noted items).
I checked field status group for GL Account as well as posting key. In both the field status group, "profit center' is optional.
So please help me how to bring profit center field in customer noted items.

Hi,
Your original document was a noted items for which PC is irrelevant. Documents with PC assignment and created as noted item can not be simulated. Hence you can not update PC in it. For reference purpose other fields like reference or text can be used.
Regards
Edited by: Atif Farooq on Sep 24, 2011 6:38 PM

Work items not appearing in NWBC work overview

Hi,
I am using NWBC work overview to execute work items (EHSM3.0 - Incident management).
I have a custom workflow with one custom task (of type Standard). When the workflow gets triggered I can see the work item for my custom task in R/3 inbox (which we access using Tx SBWP). But the same work item is not appearing in NWBC work overview.
When I replaced my custom task with standard task TS00500003 in the workflow, it did appear in NWBC work overview.
I added an entry in table IBO_C_WF_TAS for my custom task with following details but it did not resolve my issue.
Application ID: EHHSS_INBOX
Task ID: <custom_task_no>
Default Action: INCIDENTEDIT
Is there any other setting/config I need to do in order to view work items (for custom tasks) in NWBC work overview?

Hi,
This is a job of portal consultant to launch SAP GUI for portal UWL workitems also similar to SAP SBWP.
Your portal consultant will be the best guy to answer.
Regards,
Ibrahim

Keynote transitions do not appear on external display

I am practicing for a big presentation. I have a Macbook Pro connected to a Toshiba LED projector.
I have a beautiful Keynote presentation completed with great transitions, however I have 2 issues:
on the secondary screen for the audience:
1. no transitions appear. The slide just advances to the next slide with no transitions appearing. Why would that be?
2. The picture size for the viewing audience is too small. I'm not sure how to adjust that. I did go into screen displays, but I haven't found the correct setting yet.
I really am concerned about those transitions not appearing.I really want those. Anyone know how I can fix that?

There are a few things you should check:
1) In the Keynote Preferences/Slideshow Preferences window: be sure that the button "Present on Secondary Display" is checked. This puts the presentation onto the projector and should show your transitions as you have created them.
2) Same window, check the box marked "Scale slides up to fit display."
3) To view the "presentation preview" on your own computer screen, check the box "Use alternate display to view presenter information" in the Keynote Preferences / Presenter Display Preferences window. Check the other boxes as you prefer. I recommend checking the "Ready to Advance Indicator" box because this very useful feature lets you know the status of Builds and Transitions.
4) In the System Preferences / Displays window: Check the button marked "Detect Displays." This should set the optimum resolution and screen size automatically for the projector your are using.
5) If the image is still too small, the projector may have a "zoom" control which will change the size of the projected image on the screen. OR, you may need to reposition the projector farther from the screen; this will increase the image size.
Good Luck.

FB01 transfer balance from Customer to Venodor profit center not appearing

Client want to transfer balance from t.code FB01 customer 14 posting key to 24 posting key to Vendor.
But profit center field is not appearing. please help

Hello,
There is no such way to transfer the balance of the profit center from customer to vendor.
If you can explain what you are going to achieve and describe your business process, it would be helpful to give you the answers.
Regards,
Ravi

Conditions not appearing in the display mode of Purchase order

Hi,
We are facing an issue where in the display mode of Purchase order,if I click on the conditions tab in the item details, Iam getting a blank screen. But if I trigger the pricing procedure in the change mode for eg. by changing the quantity or price, the conditions are appearing.
I want to know why the conditions are not being shown in the display mode. All the PO's are using the standard pricing proceduresRM0000.
Also when I trigger the pricing in the change mode for some POs the condition types like PB00, NVAS etc are appearing twice, in some POs the condition types are appearing thrice and in some all the condition types are appearing four times.
I have checked out some OSS notes like 798449, 456690 and 772035 but could not find the solution.
Any pointers to this will be eagerly awaited and highly appreciated.

Hi Ramachandra,
The problem on not being able to see details in condition tab is due to lack of authorizations
prasanna

Bluetooth not working and not appearing in the devices manager

My bluetooth suddenly is not working anymore and i can't see it in the device manager.
I tried to reinstall the drivers but the problem persist. I have one strange USB problem happening too at the device manager, and it just appeared after the bluetooth problem. How can I solve it? One image of the problem is attached!

Try to update the IRST driver, and see if it helps the problem.
http://download.msi.com/nb_drivers/imsm/irst_intel_intel mobile express chipset_13.2.4.1000_0x71913026_81700.zip

Cost center not appearing for G/L (Balance account) while posting

I have created symbolic account 1300, accrued leave pay with account assign type as F.
I hvae assigned the relevant G/L to this symbolic account under 'assign balance sheet accounts'
However while posting, the relevant cost center assignment is not captured next to the G/L account.
The cost center is correctly maintained in IT0001 and is displayed for the other expense accounts. But is missing for all balance G/L accounts.
Please guide
Ally

Hi Ally,
I have similar requirement, can you please let me know what did you changed in the Posting Variant.
Your help is much appreciated, and rewrded. Waiting for your reply.
Thanks,
Janga K.

Default cost center not appearing for certain users

Hi Gurus,
We are on SRM 4.0 classic scenario.
For certain users when they create SC in SRM the default cost center is not automatically taken into account even if they change it to it. The default cost center was changed for these users and some of them still refer to the old cost center no. which was maintained for them.
The users are not defective and the except the cost center all other attributes work fine. I have tested by deleting & recreating new BP no. for the users but it still doesnt help. Please advise.
BR,
Sambit

hi
check if the users are correctly mapped into org structure (ppoma_bbp)
than check if theri Position are correctly mapped with the default cost center (ppoma_bbp; tab attributes; cost center
regards
andrea

Phone app in iOS 8 does not appear in full display.

Just got brand new iPhone 6, 64 GB. Sometimes when I open my phone app, it appear that the full display of the app has shifted down by quarter of an inch, with the bottom quarter inch "cut off" and the top quarter inch empty black. See the 2 screen shots I took below. The issue seems to continue even after I re-start the app. After closing and re-opening the app a few times, the screen eventually "shifts" back into normal position.
Anyone else having this issue? Haven't noticed this issue in other apps yet. If you ask me, this seems like a lousy software bug.
Below are the actual screen capture. In the first one, note the top black band. And in both the screen captures below, in the bottom, all the icons are "cut-off".

You can try resetting your iPhone by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.

Version 7.2.0 full screen mode does not appear in external display

I just upgraded to Version 7.2.0. The new full screen mode is fabulous. But, when the video starts, it moves the QuickTime window from my giant, external monitor to my laptop monitor. Is there some way to view video in full screen mode on my external monitor?
Cheers,
Greg
MacBook Pro Mac OS X (10.4.10)

Here's a solution I thought should work for QuickTime(not pro):
When you plug in an external monitor and choose to extend your desktop there is an extra tab in the "Display Settings" window for "arrangement". So, obviously on this page you can arrange your screens and decide which side you want your external monitor to extend your desktop on. Also, you can hold and drag the menu bar giving you the option of putting the menu bar on your external screen. So, one would think that the display that has the menu bar on it should be used as your default display. So, you would also think that QuickTime Player, when put into full screen mode, would use your "default" display to go into full screen. This seems logical, and possibly even desired behavior from a computer.
However, this is not the case. When I gave this a try no matter where you put your menu bar the QuickTime Player will always open its full screen mode in your MacBook Pro's display. What I propose is some how (though I'm unsure of how to do this) contact apple with a feature request that would allow you to explicitly set a default display and to have all applications use that display for when it goes into full screen.

Excise Invoice Tab not appeared in MIGO Display mode

Dear All Guru,
we are facing a problem after posting excise invoice,we are not able to see excise invoice tab in MIGO display mode .We are done all necessary patch uploading but there are some ABAP programming change related to MIGO display.
Pls, send necessary note or some clue.
Thanks,
Abhijit

Hi Abhijit,
How you posted the excise invoice, have you done this posting in MIGO transaction or in J1IEX transaction.
If you have not gor the Excise tab in MIGO while posting you cann't get the same after posting also. You need to do settings for this in IMG settings for the excise group customization then you will get this excise invoice tab in MIGO
Hope you understand.
rgds
Chidanand

Work Center not appearing in CM25 display

Similar Messages

Maybe you are looking for