Work ceter for quality

Dears
i want to create a work ceter for quality to capture quality cost -parameter i given is
usage is 002
standard value key is SAP1
control key is QM04
no formulas in capacity tab,scheduling tab,costing tab
in costing area pls confirm that wether we need to give formula????
cost center name was given
now in quality plan i assign this work center now my question is that
wether we need to give any value in set time and machine time and labour time?
what is the concept of giving value here as we are giving our time while confirming the activiting at the time of RR
PLS GIVE CLEAR ANSWER
FAISAL

Hi,
If you want to capture quality cost (Appraisal Cost) you will have to assign the activity type & formula (for the activity you will be doing in the inspection) in the work center. When you use the work center in the inspection plan, will have to give control key QM04 (Confirmation Required) & planned time required for inspection operation.
Also, you will have to create quality order of order type QL01 & assign the same to material master inspection type.
After this, you will be able to capture the cost of inspection when the inspection is completed. This confirmation can be done either while result recording or while taking usage decision for the inspection lot.
Please note that, the inspection cost can be captured only if you are inspecting material with inspection plan.
Regards,
Prashant Kolhatkar

Similar Messages

  • Best Work Flow for Quality????

    I do a lot of photo montages in After Effects and then import them into Final Cut to incorporate them into my timeline. I am really dissapointed with the quality of the photos once I export my timeline from FCP and encode to MPEG-2. The photos I am using are very hi-res, so I am wondering if it is a step or setting I am missing in either AE or FCP. I keep all my comp settings the same as my FCP timeline (DV-Pal). Should I be using something else if I want the best quality?

    You'd be better off staying away from DV quality for high detail work (like titles, animations, or AE photo montages). DV50 would work, or even better, Apple's ProRes422.
    Of course, for perfect quality, Uncompressed is a nice way to go if you've got the drive space and speeds to handle it.
    --Tex

  • Work flow for Rejections in Quality- Usage decision

    Dear all
    We are in the process of activating work flow for Quality Inspection, During Usage decision there may be rejections for which we need to trigger a mail to the Internal department , stating the Remarks, description, rejected quantity etc ,
    If any one has come across the same scenario kindly help us so as to implement the same in our organization.
    Regards
    Rahul Bhat

    Hi,
    You can do any of the following according to you Requirement.
    1) Below the Rejection Branch using the Send mail you can send the mail to Respective person.
    2) Other wise using the Function Module you can send the mail, refer this l[ink|https://wiki.sdn.sap.com/wiki/x/nYKdAw ].
    3) Else place this Std. Task TS20000139 and provide the necessary binding below the Rejection branch a popup will open and the user can enter the comments and it will go to the Person whom you want.
    Try any of this according to you requirement.
    Regards,
    Surjith Kumar

  • HT5525 I have been told that it is recommended that I  update i-photo '11 version 9.2.2  and want to publish a book I've been working on for 2 weeks! Will it really be of lesser quality if I don't update i-photo?

    I have been told that it is recommended that I  update i-photo '11 version 9.2.2  and want to publish a book I've been working on for 2 weeks! Will it really be of lesser quality if I don't update i-photo?

    Question
    Will it really be of lesser quality if I don't update i-photo?
    Answer
    NO!
    LN

  • Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this?

    Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this? While Apple's headphones have (finally) admittedly gotten better of late, I still prefer the much more comfortable headphones & sound quality that Bose makes and that I spent the money for.

    Bose Product Support

  • Any hope for quality basic phones?

    I'm out of contract, just got done browsing for a basic replacement phone and am disappointed with the current offerings. I feel that was marketing and intended. I've been a Verizon Wireless customer since 2001 and I was grandfathered in once they bought Alltel. I like to use Verizon because I get good reception in my area on their voice network and many of my family and friends use the service, so we have free mobile-to-mobile calls and texts. I say free, but I consider it a bargaining chip that came as part of the fee in the plan that I pay for every month.
    I do not want a "smart phone" my lifestyle doesn't need or desire it. I have computers at work and home and all my typical haunts, I don't want to carry around an additional Internet device in my pocket (yes I know basic phones can access the net too in a limited way, for a premium). Being constantly online isn't desirable to me. I don't want to be GPS tracked, or browse the Internet on a tiny little phone screen. I like my old voice and text plan, the price is right. I'm not inclined to pay at least an extra $30/month to start a service that I don't want and just open the door for data overage fees - Just to have a decent phone! It's a despicable and ethically embarrassing corporate strategy.
    So without getting into the profit motivations for phasing out basic service plans by only offering smartphones, why can't we have:
    Long battery life
    modern tablet style ergonomics
    decent reliable OS
    possible wi-fi if desired
    Good camera and flash
    rugged enough to last at least the duration of a 2-year contract with normal wear
    Good sound quality and antenna
    Technologically we already nailed it, have been there a long time but instead you try to force us to commit to these expensive bells and whistles many of us don't need or request. In this day and age I feel that basic phone service is a need, so why not do it right and excel at it? You probably don't make as much money off of it, but I'm still happy to pay like I have been if you would just sell a reasonable device for me to use. I'm tired of being made to feel like a second class citizen in the Verizon store with my old flip phone because I just want options, and my requests are fundamental, only basic service and good performance with my phone.

    That tired old argument?
    I don't buy this supply side excuse. All these phones are useless without a service provider. Most are locked to providers. The manufacturers sell what the buyers want and the real buyers are the carriers, who then resell to the consumer.  The carriers want to pay the leases on their new networks and maximize profits, so they need data plans. Many consumers want these features and many do not (jaymeson). My gripe is with the quality of Verizon's non-data plan phones sliding backwards...
    In my business, satisfied repeat customers are the majority of clients. Did Verizon not make profit before the smartphone hype? Verizon is diversified and very large, they tend to trample the individual consumer and it's their way or the highway. I had an experience in what was called a "corporate" verizon store yesterday. I wanted to evaluate my plan and make sure they had count my promotional minutes. The new alert system I learned is based off only your plan minutes and so before knowing that I got nervous when texts came in that said that I was reaching my allotment early. I thought they dropped my promo. I went into the store to sort this out face-to-face. It was quiet, there were three salesmen standing in the corner twisting their thumbs and doing nothing while I waited half an hour to be seen by someone. After authenticating me with my account, supposedly they couldn't pull my plan up on their computer and rudely kept pounding the mantra that I had to call customer service! Total waste of my time.
    I've ended up ditching Verizon and ordering a nice new out-of-contract smartphone (best bang for buck feature-wise) and it should be here in a couple days. I'm activating on a different network, not as expensive or fast, but I don't need the download speed perks and will block most of it. The prepaid as suggested by Weth provides the freedom that I want. I'm only remaining on Verizon until I get the new phone in to activate and port over my number. If I like it the business contract phones will follow.
    I'm going to consider this thread closed. I learned there is NO hope for quality basic phones on verizon. Thanks for participating.

  • What actions should be taken while working with  the quality system

    Hi all,
    The development phase has been completed, I would like to know what are the steps we need to follow when we are working with  the quality system.
    I have some doubts regarding this could any one give the inputs please.
    1. Where should we create any Roles and Authorizations.Dev/QA/Prd
    2. Where should we  craete process Chains. Dev/QA/Prd.
    3. Can I transport the queries without using  Bex transport. What will happen If i dont use the Bex transport.
    Thanks in Advance
    Regards
    Kumar

    Hi Kumar,
    your BW quality system will be connected to your R/3 Production system from where you'll extract the real time data and do testing which includes estimation of downtime in case of filling up of the set up tables and so on...
    the most general procedure is to create the Roles and Authorizations in teh development system and then transport it across to production through your quality system...
    Process chains you afford to create it directly in your production system itself... that's no big deal...
    And of course, you'll have to transport the queries only using the BEx transport.. there's no other go for this as its the standard procedure given by SAP...
    Hope it helps..
    Regards
    Manick

  • HT5557 The ibooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?

    The iBooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?

    I went to the Audio store to see about getting a surround sound and the salesperson asked me why I wasn't using AirPlay, he said it was better than the Bluetooth, better quality. So I do have AirPlay on my Sony and I installed the app on my iPhone 5 but they can't find eachother.......when I try looking for my iPhone on my receiver it does not show it. The Sony display works through my TV, the set up screen is there but it says no devices found. Like I said, the Bluetooth finds the iPhone and works ok, but the AirPlay does not.....looking at the manuel it says that the AirPlay will recognize my device (iPhone 5) but it does not..........

  • My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

    My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

    I just figured out the print quality issue for my wife with her new iMac and new printer.
    She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
    Turns out the newer printer had the option to connect via wifi which we used during setup.
    The driver options are completely different depending on how you connect.
    Once I connected via USB the correct options were available and the print quality was better.
    Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
    If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
    One user had to delete the old printer driver before Software Update loaded the newer printer driver.
    https://discussions.apple.com/message/15947486#15947486
    On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
    I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

  • Standard print form for Quality Notificationwith Digital Signature

    Hi All,
    Can anyone suggest me standard Print Form available for Quality Notifications with Digital Signature?
    Thanking you in anticipation of help.
    Regards,
    Devang

    Hi Devang,
    Please let me know the following:
    1. In which SAP version are you working on ?
    Thanks ,
    Srinivas

  • Restricting authobject I_QMEL for Quality notifications and HR PCRs

    Hello,
    We have encountered an role conflict when the authorization object I_QMEL is used both for Quality notification and HR PCR access on the portal.  Here is the scenario.
    Quality Administrator has I_QMEL for:
    - notification type X
    - transaction IQS1 and IQS2
    - all work is done in the GUI
    Employee who is a Manager has I_QMEL for:
    - notification type Z
    - transactions IQS1 and IQS2
    - all work is done on the portal
    The role conflict arises when one user has both the Quality Administrator role and the Manage role.  The user can then use the GUI to view notifications of type Z - that any manager has submitted.  This means the user can view all personnel change requests in the systems.  These PCRs contain sensitive information.
    Any ideas on how I can design the security such that this role conflict is suppressed?
    Thanks!

    Hi Vicky,
    I have the same problems you had. I also need to implement your requirements 2) and 3)
    How have you solved your requirements? Please let me know your solutions.
    Thanks in advance
    Sarah

  • How to save vector work sharp for web?

    Hello guys, I need all your help!
    I am trying to import a full color vector work from illustrator into an iPad.
    The original illustrator file is about 10MB and I am trying to achive size that is under 128K.
    I used "save for web" but result is not sharp enough at all.
    Is there a better way to save without loosing much detail and still keep the size small from illustrator?
    Should I import to photoshop first to save?  I am just throwing ideas.
    Thanks,
    W.

    I have finally figure out how to save files in smaller size with out loose much quality but now I am encounter with the another issue.
    Files' (JPEG) typefaces are sharp and legible look perfect on iPad, when the same file (JPEG) imported to iPhone, the typeface was not able to read.
    iPad is much bigger than iPhone.  Images work perfect for iPad in theory it shouldn't have lack pixel issue.
    It really beats me.  I don't know how to figure this out.  If you have any idea, please let me know your insight.
    Thanks,
    W.

  • Set a User Status for Quality Notifications only if they are "Activated".

    Hello experts:
    I need to be able to set a User Status for Quality Notifications only if they are "Activated".
    When defects are recorded for an inspection lot, a "Defect Notification" is created which can be activated to become a "Quality Notification".  Initially, the only difference between the inactive "Defect Notification" and the active  "Quality Notification" is that  the system status DEFR is active for the "Defect Notification", but is cleared when the notification is activated.
    So, I'm looking for the business process associated with the Activation to use as a trigger for my own user status.
    I checked the business rules for status DEFR and found that the following processes clear this status
      PMM1 -  Postpone Notification
      PMM2 -  Put Notification In Process
      PMM3 -  Assign Order
      PMM6 -  Put Notification In Process Again
    Any Ideas ?

    Perhaps some additional information would help you understand what I need to do.
    For notification type F3, we are recording all defects found in production.
    Most of these are expected defects that result in a minor reduction in yield.
    For this type of defect, we do not activate the notification, and the inspection lot is closed automatically at the end of production.
    However, sometimes defects are observed of an unexpected type or a higher than expected quantity.
    When this happens we manually activate the notification and assign tasks to find and correct the cause.
    It is only for these activated notifications that I want to automatically set a user status, which among other things, will prevent the notification from being closed until some other actions are complete and a different user status is selected.
    The function of the user status currently works exactly as I want, but if it is set as the initial status for all F3 notifications, it is also preventing the un-activated defect notifications from automatically closing.  I therefore want to use the Activation event as the trigger to set my user status.

  • Looking for quality, hard to find instrument samples

    Hello,
    I'm a traditional (acoutic) Korean drummer/musician looking at going going electric (both for composing and later performing these virtual instruments on stage).
    I would like samples of Korean instruments in my computer to trigger and/or make loops.
    I can try making samples by recording my instruments on my own, but I'm willing to pay for quality rather than make them on my own. Also I don't have all the instruments I would like.
    Can you tell me where there might be even the possibility of quality Korean instrument samples?
    Thank you in advance for you help.

    just visited your website, looks like you have a great group going there.
    actually looking at the photos on your site made me think, you'd be best off getting in there and sampling the instruments yourself.
    you'll probably find a bunch of stuff out there to buy.. but I think it would be a shame if you just hobbled together a bunch of more or less generic asian percussion samples just because that's all you could find. if you're an expert in these instruments and in the musical tradition of it all, you're in a really great position to really understand the dynamics of the sounds they make and how best to capture it all, so that you get similar playability from your sample set.
    I'd start off by doing some test runs and experimenting. record some of the instruments you do have and that you play yourself. get your hands on the best stereo mics you can find, a nice room to do it in, and a nice preamp/converter.
    once you've tracked a whole bunch of hits and whatever else you can produce with an instrument, spend some time editing it all up and then try out some mapping in the EXS24 to see how it plays. you'll quickly find out what works best. then once it's all working out for you and you've got a technique down, you could set up a day in a studio and get as many players and instruments in as you can. record the bejeezus out of them, knowing that you can then go and edit and keymap it all later.
    it can be a lot of work, but there's nothing quite like roll-your-own sampled instruments, especially when you are someone that really understands what a particular instrument is capable of in terms of range of sound. you'll really be able to get in there and capture so much more of the nuances that these instruments can produce than someone that just stuck a mic in front of something they didn't understand and hit it with a stick. and then with your multisamples and velocity layering, you'll be able to tweak it so much better to play authentically cos you know what to listen for.
    also consider this. if you have a clear focus on what kind of positive contribution doing this work could have to the music and performances of your group, you might be able to apply for a community arts grant in order to really do a good job of this. you could afford to get into a nice sounding studio with good choice of mics and an engineer to help it go well, as well as some budget to bring in players to capture the unique sound of their instruments. community arts bodies can be quite positive about funding this sort of thing, when it involves archiving traditional art and culture within your community, and also contributes to the continued development of more creative work at the same time. food for thought anyway.

  • ACTIVATE WORK FLOW FOR QM NOTIFICATION

    Dears
    Please tell me the step for activating work flow template for Quality notification
    If we activate it effect any other module?
    A QM consultant can be activate it or it required technical person
    Any in put will be highly appricaited
    Thanks in advance
    Faisal
    Edited by: Muhamed Faisal on Jul 21, 2011 8:00 PM

    Hi,
    For all three tasks, it is very conveniant to assign ROLE or USER itself to the task.
    But for that Purchse activity would be your new and separate task it self, for which you should new task, where you can assign the RULE for the Agent. That may make it optional as per your requriement.
    Hope it'll work for you.
    Update us to help you more, reward points to help you better!
    Regards,
    Shyamal

Maybe you are looking for