Work flow errer handling

how can we configer the work flow for errer handlin in ale

http://help.sap.com/saphelp_nw04/helpdata/en/78/21772051ce11d189570000e829fbbd/frameset.htm

Similar Messages

How can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.

how can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.?
please explain the important questions.

How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
              LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
          or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data:    FixedLine type i, " number of fixed line on a certain screen
                LoopLine type i, " the number of lines occupied by one steploop item
                FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new                                                               " scrolling screen is empty, otherwise is 1
                Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
                pageno    type i, " you need to scroll screen how many times.
                line      type i, " number of lines appears on the screen.
                index(2) type N, " the screen index for certain item
                begin     type i, " from parameter of loop
                end       type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
                   LoopLine type i (see step 1)
                   FirstLine type i (see step 2)
                   DataLine type i ( this is the item number you will enter in transaction)
          changing pageno    type i (return the number of page, depends on run-time visible                                                                             line in table control/ Step Loop)
          changing line      type i.(visible lines one the screen)
data: midd type i,
      vline type i, "visible lines
if DataLine eq 0.
   Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
        pageno = DataLine div vline.
        if pageno eq 0.
           pageno = pageno + 1.
        endif.
elseif FirstLine eq 1.
        pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
        midd = ( DataLine - 1 ) mod ( vline - 1).
        if midd = 0 and DataLine gt 1.
                pageno = pageno - 1.
        endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
                    FirstLine type i(see step 2)
                    LineIndex type i(item index)
          changing Index type n.    (index on the screen)
if FirstLine = 0.
        index = LineIndex mod Line.
        if index = '00'.
                index = Line.
        endif.
elseif FirstLine = 1.
        index = LineIndex mod ( Line - 1 ).
        if ( index between 1 and 0 ) and LineIndex gt 1.
                index = index + Line - 1.
        endif.
        if Line = 2.
                index = index + Line - 1.
        endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
                    DataLine type i
                    FirstLine type i
                    loopindex like sy-index
        changing    begin type i
                    end type i.
If FirstLine = 0.
   if loopindex = 1.
        begin = 1.
        if DataLine <= Line.
                end = DataLine.
        else.
                end = Line.
        endif.
   elseif loopindex gt 1.
        begin = Line * ( loopindex - 1 ) + 1.
        end   = Line * loopindex.
        if end gt DataLine.
           end = DataLine.
        endif.
   endif.
elseif FirstLine = 1.
if loopindex = 1.
        begin = 1.
        if DataLine <= Line.
                end = DataLine.
        else.
                end = Line.
        endif.
elseif loop index gt 1.
        begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
        end =   ( Line - 1 ) * ( loopindex - 1 ) + Line.
        if end gt DataLine.
                end = DataLine.
        endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
      name2(14) value 'EKPO-MENGE(XX)',
      name3(15) value 'RM06E-SELKZ(XX)'.
assign:         name1 to <material>,
                name2 to <quan>,
                name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
        perform calrange using Line DataLine FirstLine sy-index
                         changing begin end.
loop at DataTable from begin to end.
        perform calindex using Line FirstLine DataTable-LineIndex changing Index.
        name1+11(2) = Index.
        name2+11(2) = Index.
        name3+12(2) = Index.
        perform bdcfield using <material> DataTable-matnr.
        perform bdcfield using <quan>     DataTable-menge.
        perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
       NO STANDARD PAGE HEADING LINE-SIZE 255.
                Declaring internal tables                            *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
         dummy(255) TYPE c,
       END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
          ematn(18),      "Material Number.
          menge(13),      "Qyantity.
          netpr(11),      "Net Price.
          werks(4),       "Plant.
          ebelp(5),       "Item Number.
        END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
           lifnr(10),      "Vendor A/c No.
           bsart(4),       "A/c Type.
           bedat(8),       "Date of creation of PO.
           ekorg(4),       "Purchasing Organisation.
           ekgrp(3),       "Purchasing Group.
           x_data LIKE TABLE OF it_idata,
         END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
                Search help for file                                 *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_file.
START-OF-SELECTION.
       To upload the data into line structure                        *
CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
      filename = p_file
      filetype = 'DAT'
    TABLES
      data_tab = it_dummy.
    Processing the data from line structure to internal tables       *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
    IF it_dummy-dummy+0(01) = 'H'.
      v_indx = v_indx + 1.
      CLEAR   it_idata.
      REFRESH it_idata.
      CLEAR   it_me21-x_data.
      REFRESH it_me21-x_data.
      SHIFT it_dummy.
      SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
                                       it_me21-bsart
                                       it_me21-bedat
                                       it_me21-ekorg
                                       it_me21-ekgrp.
      APPEND it_me21.
    ELSEIF it_dummy-dummy+0(01) = 'L'.
      SHIFT it_dummy.
      SPLIT it_dummy AT v_delimit INTO it_idata-ematn
                                       it_idata-menge
                                       it_idata-netpr
                                       it_idata-werks
                                       it_idata-ebelp.
      APPEND it_idata TO it_me21-x_data.
      MODIFY it_me21 INDEX v_indx.
    ENDIF.
ENDLOOP.
                To open the group                                    *
PERFORM open_group.
        To populate the bdcdata table for header data                *
LOOP AT it_me21.
    v_count = v_count + 1.
    REFRESH it_bdcdata.
    PERFORM subr_bdc_table USING:   'X' 'SAPMM06E'    '0100',
                                    ' ' 'BDC_CURSOR' 'EKKO-LIFNR',
                                    ' ' 'BDC_OKCODE' '/00',
                                    ' ' 'EKKO-LIFNR' it_me21-lifnr,
                                    ' ' 'RM06E-BSART' it_me21-bsart,
                                    ' ' 'RM06E-BEDAT' it_me21-bedat,
                                    ' ' 'EKKO-EKORG' it_me21-ekorg,
                                    ' ' 'EKKO-EKGRP' it_me21-ekgrp,
                                    ' ' 'RM06E-LPEIN' 'T'.
    PERFORM subr_bdc_table USING:   'X' 'SAPMM06E'    '0120',
                                    ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                    ' ' 'BDC_OKCODE' '/00'.
    MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
    LOOP AT it_me21-x_data INTO x_idata.
      CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
      CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
      CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
      CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
      v_indx = v_indx + 1.
      PERFORM subr_bdc_table USING: 'X' 'SAPMM06E'    '0120',
                                     ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                     ' ' 'BDC_OKCODE' '/00'.
    ENDLOOP.
    PERFORM subr_bdc_table USING:    'X' 'SAPMM06E'    '0120',
                                     ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                     ' ' 'BDC_OKCODE' '=BU'.
    PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
                  End of selection event                             *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
    WRITE :/10 text-001.          "Sucess records
    WRITE :/10 SY-ULINE(20).
    SKIP.
    IF it_sucess IS INITIAL.
      WRITE :/ text-002.
    ELSE.
      WRITE :/   text-008,          "Total number of Succesful records
              35 v_ns.
      SKIP.
      WRITE:/   text-003,          "Vendor Number
             17 text-004,          "Record number
             30 text-005.          "Message
    ENDIF.
    LOOP AT it_sucess.
      WRITE:/4 it_sucess-lifnr,
             17 it_sucess-tabix CENTERED,
             30 it_sucess-sucess_rec.
    ENDLOOP.
    SKIP.
*-----To display the erroneous records
    WRITE:/10   text-006.          "Error Records
    WRITE:/10   SY-ULINE(17).
    SKIP.
    IF it_error IS INITIAL.
      WRITE:/   text-007.          "No error records
    ELSE.
      WRITE:/   text-009,          "Total number of erroneous records
             35 v_ne.
      SKIP.
      WRITE:/   text-003,          "Vendor Number
             17 text-004,          "Record number
             30 text-005.          "Message
    ENDIF.
    LOOP AT it_error.
      WRITE:/4 it_error-lifnr,
             17 it_error-tabix CENTERED,
             30 it_error-error_rec.
    ENDLOOP.
    REFRESH it_sucess.
    REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include           ZMM_INCL_PURCHASEORDERKB01
DATA:   it_BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
DATA:   it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA:   E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
       msgtyp(1)   TYPE c,
       lifnr LIKE ekko-lifnr,
       tabix LIKE sy-tabix,
       sucess_rec(125),
     END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
       msgtyp(1)   TYPE c,
       lifnr LIKE ekko-lifnr,
       tabix LIKE sy-tabix,
       error_rec(125),
     END OF it_error.
       Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu.     "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12).                      "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX.       "' ' = delete session if finished
"'X' = keep   session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12).             "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX.     "' ' = delete session if finished
"'X' = keep   session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen                                                *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
     GROUP = SPACE. "OR USER = SPACE.
    MESSAGE E613(MS).
ENDIF.
create batchinput session                                          *
FORM OPEN_GROUP.
IF SESSION = 'X'.
    SKIP.
    WRITE: /(20) 'Create group'(I01), GROUP.
    SKIP.
*----open batchinput group
    CALL FUNCTION 'BDC_OPEN_GROUP'
      EXPORTING
        CLIENT = SY-MANDT
        GROUP = GROUP
        USER   = sy-uname.
    WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ENDIF.
ENDFORM.                    "OPEN_GROUP
end batchinput session                                             *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
    CALL FUNCTION 'BDC_CLOSE_GROUP'.
    WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ELSE.
    IF E_GROUP_OPENED = 'X'.
      CALL FUNCTION 'BDC_CLOSE_GROUP'.
      WRITE: /.
      WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
    ENDIF.
ENDIF.
ENDFORM.                    "CLOSE_GROUP
       Start new transaction according to parameters                 *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE     = TCODE
      TABLES
        DYNPROTAB = it_BDCDATA.
    WRITE: / 'BDC_INSERT'(I03),
             TCODE,
             'returncode:'(I05),
             SY-SUBRC,
             'RECORD:',
             SY-INDEX.
ELSE.
    REFRESH it_MESSTAB.
    CALL TRANSACTION TCODE USING it_BDCDATA
                     MODE   CTUMODE
                     UPDATE CUPDATE
                     MESSAGES INTO it_MESSTAB.
    L_SUBRC = SY-SUBRC.
    WRITE: / 'CALL_TRANSACTION',
             TCODE,
             'returncode:'(I05),
             L_SUBRC,
             'RECORD:',
             SY-INDEX.
ENDIF.
Message handling for Call Transaction                              *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
    IF E_GROUP_OPENED = ' '.
      CALL FUNCTION 'BDC_OPEN_GROUP'
        EXPORTING
          CLIENT = SY-MANDT
          GROUP = E_GROUP
          USER   = sy-uname
          KEEP   = E_KEEP.
      E_GROUP_OPENED = 'X'.
    ENDIF.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE     = TCODE
      TABLES
        DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM.                    "BDC_TRANSACTION
     Form subr_bdc_table                                            *
      text
     -->P_0220   text                                                *
     -->P_0221   text                                                *
     -->P_0222   text                                                *
FORM subr_bdc_table USING      VALUE(P_0220) TYPE ANY
                                VALUE(P_0221) TYPE ANY
                                VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
    CLEAR it_bdcdata.
    it_bdcdata-fnam     = P_0221.
    it_bdcdata-fval     = P_0222.
    APPEND it_bdcdata.
ELSE.
    it_bdcdata-dynbegin = P_0220.
    it_bdcdata-program = P_0221.
    it_bdcdata-dynpro   = P_0222.
    APPEND it_bdcdata.
ENDIF.
ENDFORM.                    " subr_bdc_table
     Form subr_mess_hand                                            *
      text                                                           *
     -->P_G_MESS text                                               *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID     = it_messtab-msgid
        LANG   = it_messtab-msgspra
        NO     = it_messtab-msgnr
        v1     = it_messtab-msgv1
        v2     = it_messtab-msgv2
      IMPORTING
        MSG    = P_G_MESS
      EXCEPTIONS
        OTHERS = 0.
    CASE it_messtab-msgtyp.
      when 'E'.
        it_error-error_rec   = P_G_MESS.
        it_error-lifnr       = it_me21-lifnr.
        it_error-tabix       = v_count.
        APPEND IT_ERROR.
      when 'S'.
        it_sucess-sucess_rec = P_G_MESS.
        it_sucess-lifnr      = it_me21-lifnr.
        it_sucess-tabix      = v_count.
        APPEND IT_SUCESS.
    endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM.                    " subr_mess_hand
Also refer
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bdc-table-control-668404
and
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
srinivas
<b>*reward for useful answers*</b>

Work Flow in FormCentral

I woulld like to create an internal form that has four to five different sections that are completed by different members of our staff. For example, HR would enter basic user information, IT would input system access user name, etc. One person would complete the first part of the form, the next person would then receive notification that the first past is done and then complete their section, and so on. Can I do this with FormCentral?

In that scenario how would the responses be collected? If I understand it wouldn't happen until the final person completes the form? Can you create buttons within the PDF form to send to the next person via email and then a final submit that rolls the information up to FormCentral? Is there another Adobe program/service that will handle these work flows?

Work Flow in Status Error

Hi Experts,
I have a Workflow which triggers on record update.
After the start step i have 3 assignment Fields and then Some validations etc.
I can see that this workflow is stopped at First assignment step Some times with Error.
And when i Open the workflow and close it again, then the next time there is a Update to a Record this workflow works fine...
This is strange..
the Workflow entry which is in ERROR will remain the same, Even if i press 'Perform' ..
DId anyone face this issue earlier!!!
It works fine for 2 days and suddenly i can see in Workflow table there is a entry with Error at First Assignment step of Workflow.
when i Open work flow, Edit some description and save it back and the rest of the workflows from then are executing without error.
But the one with Error in WF table still remains the same even after selecting 'Perform' on it.
KR
John

Hi John,
Please find details of a SAP Note 1553992 on this issue:
Symptom
- Data Manager crashes when trying to click on workflow job line (only    in MDM 5.5).
- Workflow jobs are in error state due to executing next step such as     syndication step after a job was in error state due to bad assignment.
Other terms
- Workflow crash Data Manager, O28627 2011
Reason and Prerequisites
o Description of the root cause of the bug and ways to reproduce and/or diagnose the issue:
Reproducing the scenario can be done by creating a workflow with the following steps:
1. Start
2. Bad Assignment (e.g. assignment created unique constraint violation)
3. Syndication
4. Stop
After executing the workflow job, the job is shown in error state in MDM Data Manager.
Clicking on next -> Syndication step changes the workflow job to a job that only the owner can see. The job is shown in MDM Data Manager in error state, its step description is empty and no user specified in user column.
Clicking on the workflow job will lead to a crash in Data Manager.
MDM Data Manager crashes since the workflow job is is in error state but none of his steps is in error state.
In this mode(unlisted), MDS prepares the workflow list to be send to Data Manager with user name with value NULL.
Data Manager crashes when it tries to access the user name of the workflow.
The issue was introduce with MDM 5.5.
Issue is not relating to a specific platform/DBMS.
Solution
o The workaround is:
Delete workflow job in error state using Java API.
o The description of the fix is:
The fix handles two scenarios:
1. Existing workflow jobs in error state that caused a crash
   in MDM Data Manager. A fix was made in MDS to add the owner as user
   name to the workflow jobs in such scenario.
   As a result users are able to delete the workflow job or show its
   history.
2. New workflow job will not stay in Error state and the next step will
   be correctly performed.
o The issue was fixed in the following code lines and versions:
- MDM 5.5 SP06 Patch05 Hotfix 45 (Build 5.5.65.125) -
    change list #94328
- MDM 7.1 SP07 (Build 7.1.07.113) - change list #94340
- MDM 7.11     (Build 7.11.0.146) - change list #94339
o What areas of the code were fixed?
Workflow Run Time
o What areas of the code were affected by the fix?
Workflow Run Time
o The following component(s) need to be replaced to correct the specific flaw addressed by this note:
In 5.5 Version:
Master Data Server
MDM SERVER 5.5
In 7.1 Version:
Master Data Server
o Additional component(s), if any, that were impacted and should be regression-tested by the code change:
In 5.5 Version:
GUI Clients
JAVA API
In 7.1 Version:
Data Management Clients
JAVA API
Hope this helps.
Thanks,
Ravi

Work flow in WD application

Dear Experts,
I have a output of web dynpro application where a column has an URL. My user requests to trigger workflow when he clicks the URL.
I dont know how WDA integrated with work flow. Please could you explain some scenarios why Work flow is used in WDA and What is the role for it in WDA?
Thanks in Advance.
Regards,
Venkat

Hi Venkat,
To start a workflow you can use function module SAP_WAPI_START_WORKFLOW.
In your Web Dynpro app you can use a LinkToAction, then in the properties of the LinkToAction object go to Events section, you will see the OnAction event, click on the icon on the right side on the line where you see OnAction to create a new action, you can call it START_WORKFLOW, the corresponding event handler method will be added to the view controller called ONACTIONSTART_WORKFLOW.
Then call the function module SAP_WAPI_START_WORKFLOW within the ONACTIONSTART_WORKFLOW method.
Enjoy!
Best regards... Lucio

Plz give me work flow of film editing in Final Cut Pro..

Hello Everyone...
I am basically a Avid Film Editor. Past 2 years I am using Final Cut Pro. Recently I finished Final Cut Pro Level 1 & T3. Right now I am working as a App. Support Engineer specially for Final Cut Pro .
I want know the work flow of film editing in Final Cut Pro. I am very interested to do film editing in FCP but the workflow from Avid to FCP its totally different.
I tried few options like using FCP & Cinema Tools..
1. Captured 25fps clips and cofirmed to 24fps in cinematools.
2. In FCP the Timeline frame rate is 24fps
But I am not able to understand..
1. What is Database?
2. Cant we capture 24fps in FCP?
3. How to Synchronize captured clips with Cinema Tools database?
4. How to link the captured clips in to Cinema Tools database?
5. Where do I enter the KN Start & KN End?
6. What about Pull List & Cut List?
Please give me the details of film technics in Final Cut Pro....
Thanks in advance....

I knew I'd find this same post here. That makes three versions of trhe same list of questions.
Posting three times here implies you have posted this set of questions in many other FCP forums around the Net. If that is so, do us all the kindness of returning to all of them and closing them. Include the suggestions you have received and the solutions that were successful for you. That way your multiple threads will show up on search inquiries when other confused FCP newbies try to start complex film projects.
It's a bummer you cannot find these answers in the FCP manuals, I'm usre you looked there first. But, since we run on volunteers around here, it may be several days before someone with enough practical CinemaTools experience can stop by and handle them for you. Please have some patience.
bogiesan

Flash builder 4.6 with Flash CS5.5 mobile work flow

I have a mobile application built in flash professional. For captive runtime or native extensions i use the command line.
I now want to start using flash builder, as i hear this is the undisputed better coding environment.
In flash builder, i created a 'flash professional project' to work on my app with both tools simultaneously.
I thought flash builder 4.6 would give me options like captive runtime or native extensions without using the command line.
However i dont see these options at all. When i am using a 'flash professional project' in flash builder, am i essentially just using flash builder as a code editor, and all export settings are still handled in flash IDE ? Meaning i cannot take advantage of captive runtime+ ANEs unless using an 'actionscript mobile project'
Please advise.
Also, even if i use it as just a better code editor, i am not finding it better so far.
syntax highlighting seems poor
simple things like touch events.
function parameters or inside the function like e.touchPointID , e.stageX
none of this is highlighted.
or as simple as
ball.x;
the .x would normally be highlighted, but it is not in flash builder.
Basically, i am finding as a tool to use with flashIDE as a flash professional project, so far i am seeing no benefits. Please help me to discover what i am missing about this editing environments mobile work flow.
also when i hit ctrl+s to save my work, it jumps between the two programs... saving the project i suppose? hard to just quickly save as you go in case of crashes and such.
(using winsows 7)
thanks

ba-bump

Work flow status is not changing

Hi,
The work flow is not ending. The last approver is getting the item in his inbox repeatedly though he has approved it previously and the workflow status is showing as still in progress.
Please kindly help me to solve this
Regards,
Sekhar.

Hi Chandrashekar,
When we create w work item in the workflow, we specify the thing we want to perform in it.When the task is perform we need to set the event for the end task.Event can be repoting higher autority , a mail or something.After we set a task or work process we need to handle the end manuallly.It never gets terminated itself but we have to terminate it manually.Even if you are sending the approval from the user after task completion and you must have ended the procedure.Now as the last task is not handeled properly.That is executing in endless loop.So you may go for termination of workprocess after the last mail.If you have used loop untill please use container with it.It will be helpfule.Hope your query resolves soon.
Have a best day ahead.

Info required on work flows

Hi all,
Can anyone provide me info on work flows . Any documents is highly appreciated.
Regards,
Rajashree

Hi Rajashree,
Workflow is a tool for automating the business process so that the process itself flows smoothly, without bottlenecks and without dead ends. Critical parts of the process can be streamlined with deadline monitoring and contingency options. Participants are informed of milestones in the process. The process definition itself is powerful enough to allow business re-engineering with re-training and to eliminate the impact of workforce changes on the basic business process.
SAP Business Workflow is the R/3 tool for handling the process automation within R/3 or between R/3 systems and other systems involved in the business process. It is flexible enough to handle ad hoc processes such as the circulation of an electronic document. It is robust enough to handle mission critical process in the production system such as the creation of a material master.
The different R/3 applications supply standard workflows for the commonly occurring processes. Once these workflow templates are activated, they are ready for immediate use. A complete set of workflow tools, including the workflow editor and workflow generation wizard, are provided to enhance these standard workflows or create new workflows. These tools are complemented with transactions for monitoring, tracking and the statistical analysis of the processes.
Because the business process often does not step at the R/3 boundary, various interfaces and third party tools are available for extending the process across systems.
Workflow is the technique for automating business processes. It is particularly beneficial
when different people are involved in different parts of the process
when a process only occurs sporadically and the users need to be reminded of what they need to do
when the duration of the process is critical and deadlines have to be met
when the process definition is likely to change on the fly and retraining users is not possible.
By automating the process, you free the users from having to know what to do when. Work items are sent to the participants notifying them of what they have to do, and a single click on the notification calls the correct transaction and navigates to the relevant screen.
When the workflow runs it creates work items which are like e-mails, but
they have the advantage that they contain the intelligence needed to execute the relevant task with the correct data when the operational user executes them,
they provide their own functionality so that the operational user has access to everything that is useful to improve the flow of the process,
they disappear on their own when they have been executed by someone else or made obsolete.
These work items can be received in the R/3 business workplace, MS Outlook (or any other MAPI compatible client), Lotus Notes, or work item notifications can be distributed by e-mail.
SAP Business Workflow:
accelerates the workflow across applications, functional areas, organizational units, and time periods,
supplements the integrated management of processes in the SAP System with individually tailored options for automating and actively controlling business and communication processes,
combines integrated organizational management with flexible assignment of tasks and responsibilities to locations, positions, jobs, groups, or individuals,
actively supports a quick implementation of workflow technologies through predefined workflow templates, Workflow Wizards and flexible adjustment options,
integrates every employee in the value chain by providing a versatile integrated inbox ("universal inbox") at their work centers that can be configured individually,
provides a Workflow Information System that is the foundation for process change management and continuous business engineering,
was designed to be a change-management tool,
simplifies continuous business engineering and process change management with user-friendly tools for defining and dynamically changing workflow tasks
conforms to the workflow standards of the Workflow Management Coalition (WfMC)
interfaces to other mail clients such as Lotus Notes and MS Outlook
Check these links.
http://www.sapgenie.com/workflow/index.htm
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
http://help.sap.com/saphelp_nw04/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/8d/25f94b454311d189430000e829fbbd/content.htm
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Workflow tutorials with step-by-step and with screenshots are available at
http://www.****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/c14a9b55103116e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
Hope this resolves your query.
Reward all the helpful answers.
Regards

CUP and ERM work flow error

Hi Friends,
When I am changing a role and triggering in the work flow for approval it is showing following error
2010-05-11 09:09:28,251 [SAPEngine_Application_Thread[impl:3]_32] ERROR User :   not found to get full name
2010-05-11 09:09:47,607 [SAPEngine_Application_Thread[impl:3]_25] ERROR
java.lang.Throwable: java.lang.NullPointerException
     at com.virsa.re.workflow.client.WorkflowRequestClient.getRoleProcessContextDtos(WorkflowRequestClient.java:284)
     at com.virsa.re.workflow.client.WorkflowRequestClient.execSubmitRoleApprovalWF(WorkflowRequestClient.java:83)
     at com.virsa.re.workflow.actions.WorkflowRequestAction.submitApprovalRequest(WorkflowRequestAction.java:95)
     at com.virsa.re.workflow.actions.WorkflowRequestAction.execute(WorkflowRequestAction.java:54)
     at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
     at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
FYI.. It is happening with the roles those are uploaded earlier not when I am creating any new roles.
Please Help.
Regards,
Satyabrat

Hi Satyabrat,
Which patch level you are on? Although seems not related to your issue, but there is a bug in Patch 11 -
1. It doesn't update Approver from ERM-Workflow-Approver criteria
2. it doesn't update criticality level ( if you didnt upgrade from Patch 8 to 9 and went on directly to patch 11).
If you have any of above issues, then old roles and copy of old roles will not work properly.
Check if you have criticality level defined and also try to change approver in ERM Role modification screen.
it seems the configuration is correct as new roles are working fine but to make sure also check in CUP whether the first stage of Role creation is defined as webservice.
Let us know if it helps.
Regards,
Sabita

Work flow to be triggered from portal but not from PA30 Transaction

Hi,
We have copied a standard workflow to enhance it and attached standart event to that workflow in SWETYPV t-code.
Now the work flow is triggered from both PA30 and portal whenever changes are made.But we want it to be triggered from portal alone.
Can anyone suggest how can i restrict work flow start event to be triggered from portal alone.
Thanks in advance.
Martina.

My suggestion is instead of starting the workflow by using EVENT it is better to start by using SAP_WAPI_START_WORKFLOW
As you are saying that you need to trigger the workflow only from the protal. Now in the portal you might be using a WebdDynpro Application or a BSP application, so in that application after filling all the details you might be having a button like Save or Submit or Create so under this final button you call the FM SAP_WAPI_START_WORKFLOW in the action handler.
And more over even by using this FM you can even pass the values from WD Application to workflow by using the tables Parameter Simple_container.
And one more thing is if you start a workflow by using a event then when ever the event is occured then the workflow gets triggered.
or make use of Start Condition in the basic data of the workflow.

Work Flow - Suggestions, tutorials, or Books

Hello All,
I've been teaching myself AE, as well as Ps, Ai, and Pre Pro. (Creative Suite 4)
I'm somewhat comfortable with a couple of the applications but by no means a master of any. However, I think that its takes me too long to do some things, and I believe that I have encounter some problems because of my work flow and probably could have avoided them if I had formal training.
It could also be that I don't have a frame of reference and don't know how long things actually take, and to me, I just feel like I'm moving slow. I have been surprised to find out that a particular music video or special effect that I saw took a TEAM of people, a MONTH(s) to create.
For those of you who have gone to school and learned AE (or the other programs) with an instructor and a planned course, do you think you would have grasped the program(s) and how to make your creative ideas come to life on screen as easily if you had not gone to school and learned on your own?
Now that I am learning a 3D program (Blender) and will be trying to incorporate AE, Premiere Pro, Photoshop, Illustrator and Blender all together, when needed, and I was wondering if there is any book that deals with the proper workflow. Or is just doing the tutorials and building up knowledge/skills the way. Practice makes perfect but does practice make efficient? And I haven't even gotten into the scripts or expressions YET.
In buying the Creative Suite I had visions of making MOVIES/videos with all the special effects, flashing lights, disappearing acts, etc... and since all these applications came together in the Creative Suite- its ment for and possible for a person to do ALL things, by him or herself, --maybe my thinking is wrong and one should specialize and get with a team.
Is it that when one is trying to create a certain effect or look, knowing each application and its abilities would sort of guide you to the correct work flow?? But until you know these applications -- Very Well--, its a lot like stumbling in the dark and trying out different blending modes.
Is there a book that lays out the proper or most efficient workflow. I have been reading several booking on AE and also some on Pr Ps and Ai and doing tutorials on line, and learning Blender on line at CreativeCow.net but the books don't teach workflow.
Thanks in Advance

One unfortunate side-effect of the Production Premium package is that it's one serial# that is designed to be for one user and therefore some have made the leap to the conclusion that one person can be an expert in all those applications...I think it's 11 apps (depending on where you draw the line on what's an app and what's a utility, etc.) I've actually seen a couple job descriptions in corporate environments written around the contents of the Production Premium software compilation.
...'workflow' is a pretty deep topic that is hard to learn in abstract. It's also so wildly variable and evolving so fast that codifying it is pointless. I started an HD post production book for Focal Press some years ago, but abandoned it as a lack of cooperation and transparency from manufacturers and the sheer velocity of development on all fronts...computers, codecs, displays, cameras...just prevented anything from being complete and timely.
Unfortunately the internet has spawned the idea that if enough of us with 20, 30, or 40 years experience just keep brain-dumping into cyber-space, eventually anybody will be able to somehow 'proxy' all that experience through 3 days of intense Googling. It just doesn't work that way.
Like most of us, you'll need some time in the chair to be able to really get a handle on what you need to plan for and prioritize as workflow is really specific to everyone's specific circumstances.
You'll have to start with specific questions, and get specific answers, start to accumulate the answers until they start to connect...then the Googling helps to fill in some gaps...practical experience refines your ideas on what really works and what doesn't, you add that to what you know about your tools...suddenly you're an expert.
...and usually, the decades it takes to get there fly by pretty quickly. I have no idea what happened to the last 25 years.

Work Flow RFC

Hi,
i have made some changes to the SAP developed webdynpro application as per the requirement,
when the user changes the personal information in the ESS personal information screen the Standard RFC is getting called but, if the user made any chanegs to the First name or last name or martial status the Z rfc is getting called and the work flow triggers and the notification will go to the corresponding manager for approval once the manager approves the request then the changes will appear in the portal and also saved in the backend system.
bu while making changes the first name and last name or martial status and clicking the save button the following error is coming,
Personal Data
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE
An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE:com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.per.ca.personal.fc.FcPerPersonalCA.callWorkFlowFM(FcPerPersonalCA.java:488)
     at com.sap.xss.hr.per.ca.personal.fc.wdp.InternalFcPerPersonalCA.callWorkFlowFM(InternalFcPerPersonalCA.java:681)
     at com.sap.xss.hr.per.ca.personal.fc.FcPerPersonalCAInterface.callWorkFlowFM(FcPerPersonalCAInterface.java:206)
     at com.sap.xss.hr.per.ca.personal.fc.wdp.InternalFcPerPersonalCAInterface.callWorkFlowFM(InternalFcPerPersonalCAInterface.java:242)
     at com.sap.xss.hr.per.ca.personal.fc.wdp.InternalFcPerPersonalCAInterface$External.callWorkFlowFM(InternalFcPerPersonalCAInterface.java:322)
     at com.sap.xss.hr.per.ca.personal.review.VcPerPersonalCAReview.onBeforeOutput(VcPerPersonalCAReview.java:235)
     at com.sap.xss.hr.per.ca.personal.review.wdp.InternalVcPerPersonalCAReview.onBeforeOutput(InternalVcPerPersonalCAReview.java:234)
     at com.sap.xss.hr.per.ca.personal.review.VcPerPersonalCAReviewInterface.onBeforeOutput(VcPerPersonalCAReviewInterface.java:135)
     at com.sap.xss.hr.per.ca.personal.review.wdp.InternalVcPerPersonalCAReviewInterface.onBeforeOutput(InternalVcPerPersonalCAReviewInterface.java:132)
     at com.sap.xss.hr.per.ca.personal.review.wdp.InternalVcPerPersonalCAReviewInterface$External.onBeforeOutput(InternalVcPerPersonalCAReviewInterface.java:208)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:603)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:569)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseSaveEvent(FPMComponent.java:953)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseSaveEvent(FPMComponent.java:1116)
     at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNavi.next(VcPersInfoReviewNavi.java:227)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNavi.next(InternalVcPersInfoReviewNavi.java:175)
     at com.sap.xss.per.vc.reviewnavi.ReviewNaviView.onActionNext(ReviewNaviView.java:153)
     at com.sap.xss.per.vc.reviewnavi.wdp.InternalReviewNaviView.wdInvokeEventHandler(InternalReviewNaviView.java:173)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1299)
     at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:326)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:868)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.hr.per.ca.personal.zhw201.model.ZHW201_PERSAPPR.zhw201_Persappr(ZHW201_PERSAPPR.java:179)
     at com.sap.xss.hr.per.ca.personal.zhw201.model.Zhw201_Persappr_Input.doExecute(Zhw201_Persappr_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 65 more
and my problem is that my application is working in the developement portal, but in testing it is giving error. please give me some suggestion s on this,
i have checked in the backend the RFC is available and executed successfully.
Cheers,
Apparao

Hi
    did you check the RFC in the backend with the same inputs , is it working fine .
    RFC_ERROR_SYSTEM_FAILURE An exception occurred that was not caught ,
    this would occur if there is problem from your RFC side ,
    put the code inthe try catch and try to test the application(which you are passing to the RFC) ,
     instead of application throwing the runtime exception , you would figure out the exact exception .
     even check the RFC in the backend with the same values you are passing , and execute the RFC .
     or even you can put a external debugging where the RFC get called and check whether the
     values are passed to the RFC , or other thing you can do it test the application inthe webdynpro
     with hard cording the values .

Work Flow for FCP-Motion-DVD Studio

All right, this is all new. Earlier this morning, I was able to finally go from FCP to Motion to DVD Studio, burned a DVD, and was able to play it on MAC, PC and home DVD player. Then, I edited another video in FCP, and think I lost the handle.
What is the work flow and what are the export/import settings for broadcast quality when needing to edit in FCP, add changes in Motion, and Burn in DVD Studio:
1. Edit in FCP, export as what?
2. Open Motion and import ??, make edits, export as what ??
3. Open DVD Studio, import ??, create menu, etc., build and format, then Burn.
Do I bring it in to Compressor out of FCP? I don't want to compress it.
Thanks
g5 Mac OS X (10.3.9)

umm, you'll find answers for these questions in those big books that came in your software boxes. you're asking questions that only you can determine based upon the video format you're working with, the graphics you want to use and how much video you're wanting to stick on a dvd.
you have to compress to mpeg2 to get whatever video you're working with in fcp onto a dvd.
time to open the manuals and do the tutorials.

Work flow popup

Hi Experts,
I am developing FI Invoice approval work flow by extending FIPP business object.
I have a decision task with APPROVE,CHANGE,REJECT buttons.
if the user press CHANGE or REJECT buttons then a pop up should come to enter the reason details.
The popup should have ok and cancel button and IF the user pressing the cancel button of the popup with put entering any reason then i should retain the decesion task .currently i have created the pop up in seperate task after the decesion task.
Once they click on change or reject button ,pop up is coming but as the popup is developed in next task of decesion ,i am unable to retain the decesion task ,if the user press the cancel button of the pop up with out data.
Please anybody provide me suggesstions how to handle this issue.

Hi,
Please verify this link.
CATSXT_SIMPLE_TEXT_EDITOR FM for popup in Rejection Workflow
and the wiki link
http://wiki.sdn.sap.com/wiki/display/ABAP/ApprovalDecisiononApproveorRejectwithReasonsor+Comments
-Keerthi

Work flow errer handling

Similar Messages

Maybe you are looking for