Work flow status is not changing

Hi,
The work flow  is not ending. The last approver is getting the item in his inbox repeatedly though he has approved it previously and the workflow status is showing as still in progress.
Please kindly help me to solve this
Regards,
Sekhar.

Hi Chandrashekar,
                           When we create w work item in the workflow, we specify the thing we want to perform in it.When the task is perform we need to set the event for the end task.Event can be repoting higher autority , a mail or something.After we set a task or work process we need to handle the end manuallly.It never gets terminated itself but we have to terminate it manually.Even if you are sending the approval from the user after task completion and you must have ended the procedure.Now as the last task is not handeled properly.That is executing in endless loop.So you may go for termination of workprocess after the last mail.If you have used loop untill please use container with it.It will be helpfule.Hope your query resolves soon.
Have a best day ahead.

Similar Messages

  • Task status is not changed in UWL

    Task status is not changing when it is executed in UWL. the tasks comes from R/3 when a workflow is executed . SAP says realtime refresh not supportinng in current version of UWL. please let me know any workaround to solve this issue.
    Thanks ,
    Sarath

    Hi,
    Unfortuntely, there does not seem to be a 'working' workaround for the issue.
    This is resolved however in SAP Netweaver 7.0 EhP2 or 7.20 versions.
    Please see /thread/1564782 [original link is broken]
    Regards,
    Srikishan

  • Production order status was not changed to 'CNF' after final confirmation.

    Hi guru.
    I experienced very special case that production order status was not changed to CNF after final confirmation.
    I did final confirmation and canceled confirmation. (CNF -> REL)
    And I did final confirmation again because of fixing activity quantity.
    the strange thing is that production order status wasn't changed from REL to CNF.
    I did  confirmation again with 0 activity, thereby  I solved this problem
    BUT i don't know why this case happened.
    Please, explain the reason.
    Thanks.

    Hi,
    As per my observation, their is not any change in the status of the order REL with confirmation CNF, instead of this, it has change from CRTD & then to TECO.
       Sequence of the status of the order as below
    1) CRTD MANC NMAT SETC
    2) REL  NMAT SETC - Changes from CRTD to REL after releasing of the order
    3) REL  CNF  PRC  CSER ERTR OPGN SETC -  After confirmation, it updated after the order REL status.
    Rgd,
    Chetan

  • Work flow mails are not coming to inbox but coming to out box in quality

    Hello,
    We are working on the implementation of Work flow for Purchase orders.
    Work flow customization is completed and even work flow is triggering when ever I create Purchase Order.
    Even Agent assignment also completed for work flow tasks via T code PTFC_CHG.
    This work flow is working fine in development.
    When I moved this workflow to quality I got a problem.
    Problem here is Work flow mails are not processing out of SAP Outbox to approvers  inbox even also after executing the program RSWUWFML2.
    When I triggered the PO in development the work item is moved to SAP out box as well as inbox. In quality It is not coming to SAP inbox.
    If I check in SOST,I will not see any of the entries related to work flow mails.
    Only above I can see in my SAP Outbox.
    So how can I Process these messages to approvers SAP Inbox.
    Any body please help me where the problem is
    With regards,
    Sudhakar

    Hi SP,
    I may be wrong, but on reading ur thread, I feel u r mis interpreting SAP Outbox with Outlook.
    Is it so, because u have mentioned about RSWUWFML2 and SOST, which comes into picture only if u r using an external mail like Outlook.
    If its Outlook, then there is no doubt that ur work item would get deleted from SAP Inbox and would be present only in Outlook.
    If its SAP Outbox, then u r not supposed to get ur work item in ur Outbox unless it is processed or executed thru ur SAP Inbox.
    Hope it helps.
    Aditya
    Edited by: Aditya Varrier on May 23, 2008 1:52 PM

  • Why has my Photo Stream stopped working?  I have not changed any settings.

    Why has my Photo Stream stopped working?  I have not changed any settings on either my iPhone or my Mac.  I did try to reset them, but with no success.

    FAQs and trouble shooting tips are here - http://www.apple.com/support/icloud/photo-stream/
    Other than that we need more details to possibley help including what "doesn't work", how you tried to restart, any thing else remembering that we can not see your or yoru computer so depend on what you tell us
    LN

  • Work flow - user is not reciving mail,once CREDIT MEMO submits for approval

    Hi All,
    Please find the issue as below.
    User created the credit memo and submitted for approval. user is expecting the mail in his mail-box, once he submitted the credit memo for approval and same way once approver approved the credit memo, user is expecting mail such that credit memo has been approved.
    He informed that previously he is receiving the mails as expected.
    Now all of sudden he is not receiving mails.
    I have checked work flow mailer, mailer is up and running.
    I have gone through the wf_notifications table, here i can see that MAIL_STATUS column having value of "MAIL".
    even i have gone through WF_USERS table this particular user is existing and status is "ACTIVE".
    But user is not yet received any mail.
    Kindly some one help me to sort out this issue.
    Thanks in Advance.
    Edited by: user627525 on Jun 8, 2011 5:58 AM

    Thanks RK for your quick reply.
    I was gone through the details you have provided. every thing is fine as expected.
    Later i have checked workflow mailer, it was down, due to that notifications are not reached to users/customers.once it is up and running mail notifications sent to respective users successfully.
    Many Thanks.

  • Release Status Code not changing

    Hi experts,
         There is a button "Released" on CustomerInvoiceRequestQAF. After released, the new invoice that I have created should be released.
         But I check the released status code in CustomerInvoice.xbo's BeforeSaveEvent and the status  is still not changing. It still shows "Not Released".
    The steps when I press Release on CustomerInvoiceRequestQAF.
    1.CustomerInvoice.xbo's BeforeSave (because I have written some code there)
         this.Status.ReleasedStatusCode is still "1" meaning "Not Released". It should be "3" (Released)
    2.CustomerInvoiceRequest.xbo's BeforeSave
         this.Status.LifeCycleCode is still "1" meaning "Not Released".It should be "2" (Released).
    When I press Release on CustomerInvoiceQAF. The status is changed to Released.
    Thanks in advance.
    Regards,
    Fred.

    Hi, Horst,
         Thanks,
         This case involves 2  standard BOs. CustomerInvoiceRequest and CustomerInvoice.
         CustomerInoivceRequestQAF--->Save     -->Invoice Requests (CustomerInvoiceRequestOWL)
          I can release the invoice directly here.
         CustomerInvoiceRequestQAF-->Release -->Invoice Documents (CustomerInoivceOWL)
         OR
        I can release the invoice this way. First "Save as Invoice", and Then "Release" it in Invoice      Documents.
          CustomerInoivceRequestQAF--->Save As Invoice -->CustomerInvoiceQAF(with a status "Not      Released")
         CustomerInvoiceQAF--> Release -->Invoice Documents(with a status "Released")
         The second case works fine. In the first case, the release status code doesn't change to "Released".
    Regards,
    Fred.

  • My Photoshop CS is no longer working and I have not changed any configurations.

    I have not changed my computer configurations but it states that I have and now is stating I need to activate my Photoshop.  When I do so, it leads me to a page that I try and then it gives me an error message about the server not being available.  I then try "other options" which leads me to a 1-800 and a 1-206 number.  The 1-800 gives me a recording stating go to www.adobe.com/go/activation (which did not answer my questions).  The 1-206 number isn't active.  I'm running Photoshop Version CS which I loaded onto my computer on August 7, 2012.  I have Adobe Acrobat XI Pro.  Illustrator (which I loaded at the same time) seems to be working fine.  Help would be appreciated.

    CS2 Activation

  • Work flow task id not found in UWL config XML file

    Hi
    We are facing a strange issue with UWL XML file.
    We are running EP 7.0 SP13
    We configured UWL and we are able to see the work items in UML iview.  These are the same work items as seen in SAP Inbox.
    But when we open the uwl.webflow.<system alias> XML file corresponding to the back end system, We were not able to see the task id of the work flow item displayed in the UWL.
    Any help on this would be highly appreciated.
    Thanks and Regards
    VNK

    Hi VNK
    I am facing the same issue - Please let me know if you have found a solution.
    Regards
    John

  • Log version status does not change

    Hi,
    For a synchronous scenario, I'm getting the status as 'Log Version' in sxmb_moni and the status doesnot change at all.  Can you please let me know the reason for this and how the message status can be changed to successful.
    Thanks
    Sreenivas

    HI,
    This already explained in above note please do accordingly..
    See below..
    Symptom
    Synchronous messages with message status 001 were made persistent in the database. This can occur, for example, when synchronous messages are being logged. These messages are not deleted by the Delete job.
    Other terms
    Delete, synchronous messages, message status
    Reason and Prerequisites
    You use the SAP NetWeaver Exchange Infrastructure.
    Solution
    Implement the attached correction instructions or import the Support Package listed below.
    See the note.. for more details..
    Note 930181 - Deletion of synchronous messages with message status 001.
    Also see the note
    Note 820149 - Deletion of manually changed and terminated messages
    Also see the below threads
    sxmb_moni, table sxmspmast, Messages with ICON_LED_RED, report RSXMB_SELECT
    SXMB_MONI: LogVersion
    Points rewarded if it is useful....
    Regards
    Chilla..

  • My password is not working and I can not change it or use my Apple ID. I know it is the correct one because I have used the same one for a while and keep it locked in a safe.

    My password no longer works, I have tried to change it but can not. I know it is the correct one because I have not changed it and keep a verification in a safe. It works a few weeks ago.

    Had similar issue calling Apple seems to be the only way to resolve the problem.  The issue can be resolved when you get to iTunes, since they are the ones that keep  this info. They will ask you your security questions and your purchases software, music etc. Once they are happy with your answers they will get you back up. If you choose you could go the route of forgot my password etc. but I never had any luck with that. Just my 2 cents.
    Steve

  • Leave Request Task TS12300097: Status is not changed

    Hi All!  maybe you have some idea ...
      For the ESS version Leave Request, we are using a copy of standard workflow WS12300111.
      When applying leave, the workflow template is triggered and processed to task TS12300097. In this task, we use customized rule to find agent.
      In Universal Worklist, we can do the approval process and after approved, the leave request’s status is changed. But the problem is the approval task is still in the UWL, status is still “new” and the workflow template gets stuck at this step.
      The description of TS12300097 said: Once you have processed the request, the work item will automatically be set to "completed." automatically be set to "completed."
      And we can not find out why our leave request is not behave like that. Please kindly advise the possible reason.
    Thanks a lot!

    Hi All!  maybe you have some idea ...
      For the ESS version Leave Request, we are using a copy of standard workflow WS12300111.
      When applying leave, the workflow template is triggered and processed to task TS12300097. In this task, we use customized rule to find agent.
      In Universal Worklist, we can do the approval process and after approved, the leave request’s status is changed. But the problem is the approval task is still in the UWL, status is still “new” and the workflow template gets stuck at this step.
      The description of TS12300097 said: Once you have processed the request, the work item will automatically be set to "completed." automatically be set to "completed."
      And we can not find out why our leave request is not behave like that. Please kindly advise the possible reason.
    Thanks a lot!

  • SAP MDM Work Flows Status

    Hi Tim,
                      I am using SP5 not SP4, and workflow also enters in received mode after launched. But after that it goes to TRASH, and this behaviour only comes when i add some new fields to main table. is this the only reason for trash status or something more behind it. and also is it an actual status for workflows or its an uncommon behaviour.
    Thanks Tim your suggession really works for me.
                                                  Alok Sharma
    Message was edited by:
            Alok Sharma

    In General Console talks about repository structures we cant do any record manipulation. Basically it can be done at MDM DATA Manager level (in recent SPs), earlier its called CLIENT. Launch MDM Client along with the same repository, change workflow as your current table and there you can add records, assign records and launch the same.
    MDM WorkFlow
    You can find MDM workflow under Record mode.
    MDM there are no Tcodes as we use in SAP R/3.
    Basis related stuff is to maintain console which has repoaitories and Role and authorization (user and assignment of Roles to user)
    MDM has four main component
    Console, Import Manager, Data Manager, Syndicator.
    Please feel free to revert to me for further clarifications.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/9019fdb1-570c-2a10-b1ab-dd58f63de047 [original link is broken]
    www8.sap.com/mk/get?_EC=uDN7muWcXqebJJ7F_-HpBe
    searchsap.techtarget.com/searchSAP/downloads/SAPNetWeaver_forDummiesCh03.pdf

  • The url window will not take me to web address when I type it in. Has always worked before, I have not changed any settings.

    Suddenly today, the url window will not work. I checked Internet Explorer and it works fine on that. I type in www.ups.com and hit enter....nothing....what do I do to make this work again?

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Stored procedure if duty status is not changed in the sales order

    Dear Experts,
    I need one SP -
    My scenario is the duty status in sales quotation i have selected is 'without payment of duty ' by default.When i am copying the same to sales order by default it will pick up 'without payment of duty ',but i want to change it to with payment of duty if the user is again trying to change it to ' without payment of duty ' than system should not allow to add the document.
    Mona.

    Dear Mona,
    This forum is for DRQ to post your requirement for future B1 development.  Please post your questions on the main forum.
    Thanks,
    Gordon

Maybe you are looking for