Work & Flow table issue
Initially I had 3 schemas such as S1 as Source, S2 as Stage & "S3" as Target. I had created interface in which S1 was the source and S2 was used as target schema. The interface was using LKM SQL to Oracle and IKM Oracle Incremental Update as knowledge modules. The interface successfully executed and data got loaded into the table in S2. Now I am trying to load data from S1 to S3. The interface is getting failed saying *1031 : 42000 : java.sql.SQLException: ORA-01031: insufficient privileges* and when i checked Drop work table command from Operator view, I found the following SQL command drop table S2.C$_0TEST_PHASE but no where i have included "S2" schema.
The moment I am choosing a table from Target Schema, I am facing this issue. Interface is working fine when i am trying to load data from S1 to S2 or S3 to S2
Can some one help me on this???
Thanks
Venkat K
Received you file,
Logical Schema seems ok,
Physical schema
1. Check the target physical connection
Context seems ok,
Model, : seems ok ,
Check the logical schema selected in pcs_target while u reverse engg. the metadata
When you had created the new interface, from where did u dragged and dropped the model ?
check whether the it is from target.
Or delete the target datastore and drag and dorp it again.
Click on the target datastore and send me the screen shot from the interface
Reshma
Similar Messages
-
UCCE 7.2.7/CAD 7.2 SR1 Work Flow Action issue
Greetings,
This is on UCCE 7.2.7 with CAD 7.2 SR1.
Today, I created Agent Management Work Flow Action in CAD (via Desktop Admin). I want all of my agents within a specific Work Flow Group to be logged out at 9pm on workdays.
I choose the event "Time of day", create a rule and an action. The action is "Agent State Control" with value "AgentLogout". I choose to use automated reason codes. After configuration I hit "apply" and, just to be sure, I also sync the Directory Services.
The action is triggered, but the agent still has to choose the reason code to logout. Does this sound familiar to any of you or am I missing someting?
RegardsAssign it in the script.
Let's say you have created the ECC variable "userCADLayout" and you have been into CAD Admin and set this as the field index 252.
And you have created a number of layouts (e.g. Sales, Service) with different enterprise variables, ANI, DNIS etc.
Let's say agent Fred is in both the Sales SG and the Service SG.
Simply set the ECC variable in the script once you have decided its a Sales call or a Service call to the matching string "Sales" or "Service".
So a "Sales" call arrives at Fred's desktop and the arrangement (layout) is appropriate; ditto Service.
Once you have done this one time, you will realize how easy it is. Of ocurse, DON'T MAKE ANY SPELLING MISTAKES. ;-)
Regards,
Geoff -
Work Flow preview issue in SBWP
Hi Friends,
We have issue related to SBWP.
When a work item is selected in SAP inbox, we are not able to to see any thing on the SAP preview window at the bottom.
It shows only the white blank screen.
Can any one please help.
Regards,
RohitThanks Marcos,
I have also cleared the buffer with SWU_OBUF and asked for SU53 to check the authorization.
Is there some setting that controls the preview or work item?
Thanks,
Rohit -
Hi,
Workflow is getting deactivated in production system after Upgrade, this is happening only in production system, we are activating it manually each day,.This does not happen in Dev and Quality systems,
Please help.
Regards,
RajivHi rajiv,
In your production system go to SWU3 in that go to Schedule background job for event queue
in that basic data
and then in REceive error feed back set as 3 option (do not deactivate).
And also go to WF-Batch user and check the mails.
The workflow is deactivating because of a error.
Hope it solves your issue
Regards,
Dheepak -
Hi All,
I am developing a report that deals with sales orders pending for approvals and wf information.
1.I need to know the relation ship between VBAK-VBELN and one of the work flow tables.
2. I need to know Work flow ID , person responsible for Sales Order
3. I would like to know what is the way to find out if any particular Sales Order is Pending for approvals.
Regards
BalramHi Balram,
Take a look at the SAP_WAPI Fm's (as mentioned before) to build up your report. There are different Fm to get the information you need and build your report.
Regards,
Martin -
Service WO through IW31 (Control Key-PM03)- PR gets work flow error
Hello All,
When we create a Service Work order (Control Key "PM03") through the operations tab in a Work Order(IW31), When we open the PR we recieve an error:
"Entry missing in table for Fund Center SP/"
The work flow recieves an error message and an email will not be sent out to be approved.
Any suggestions on to fix this.
Thanks...Thanks Pete,
Here is the error when we open the PR in ME53n or ME54n: "Entry missing in table for Fund Center SP"
We checked our work flow table and the SP fund center is correct.
When we create a service pr through me51n we do not get this error. Only when we create a service PR through IW31 (Control Key- PM03).
THanks. -
Issue regarding [Work Flow] Business Object Event Raise in ABAP Program
Hi All,
I have one issue regarding [Work Flow] Business Object Event Raise in ABAP Program.
Actual TDS is as below:
If E message type written, raise Business object BUS2005 (Production order) Event PickShortage for production order passing warehouse, transfer request
(BUS2065 Object key) in event container. Also include table of text version of error
messages for this set of Transfer
Request.
Can anybody tell me how can i write it technically in ABAP Code.
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.Hi,
Can anybody solve above posted issue!
Thanks,
Deep. -
How can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.
how can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.?
please explain the important questions.How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to <material>,
name2 to <quan>,
name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using <material> DataTable-matnr.
perform bdcfield using <quan> DataTable-menge.
perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
NO STANDARD PAGE HEADING LINE-SIZE 255.
Declaring internal tables *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
dummy(255) TYPE c,
END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
ematn(18), "Material Number.
menge(13), "Qyantity.
netpr(11), "Net Price.
werks(4), "Plant.
ebelp(5), "Item Number.
END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
lifnr(10), "Vendor A/c No.
bsart(4), "A/c Type.
bedat(8), "Date of creation of PO.
ekorg(4), "Purchasing Organisation.
ekgrp(3), "Purchasing Group.
x_data LIKE TABLE OF it_idata,
END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
Search help for file *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
START-OF-SELECTION.
To upload the data into line structure *
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = it_dummy.
Processing the data from line structure to internal tables *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
IF it_dummy-dummy+0(01) = 'H'.
v_indx = v_indx + 1.
CLEAR it_idata.
REFRESH it_idata.
CLEAR it_me21-x_data.
REFRESH it_me21-x_data.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
it_me21-bsart
it_me21-bedat
it_me21-ekorg
it_me21-ekgrp.
APPEND it_me21.
ELSEIF it_dummy-dummy+0(01) = 'L'.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_idata-ematn
it_idata-menge
it_idata-netpr
it_idata-werks
it_idata-ebelp.
APPEND it_idata TO it_me21-x_data.
MODIFY it_me21 INDEX v_indx.
ENDIF.
ENDLOOP.
To open the group *
PERFORM open_group.
To populate the bdcdata table for header data *
LOOP AT it_me21.
v_count = v_count + 1.
REFRESH it_bdcdata.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0100',
' ' 'BDC_CURSOR' 'EKKO-LIFNR',
' ' 'BDC_OKCODE' '/00',
' ' 'EKKO-LIFNR' it_me21-lifnr,
' ' 'RM06E-BSART' it_me21-bsart,
' ' 'RM06E-BEDAT' it_me21-bedat,
' ' 'EKKO-EKORG' it_me21-ekorg,
' ' 'EKKO-EKGRP' it_me21-ekgrp,
' ' 'RM06E-LPEIN' 'T'.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
LOOP AT it_me21-x_data INTO x_idata.
CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
v_indx = v_indx + 1.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
ENDLOOP.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '=BU'.
PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
End of selection event *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
WRITE :/10 text-001. "Sucess records
WRITE :/10 SY-ULINE(20).
SKIP.
IF it_sucess IS INITIAL.
WRITE :/ text-002.
ELSE.
WRITE :/ text-008, "Total number of Succesful records
35 v_ns.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_sucess.
WRITE:/4 it_sucess-lifnr,
17 it_sucess-tabix CENTERED,
30 it_sucess-sucess_rec.
ENDLOOP.
SKIP.
*-----To display the erroneous records
WRITE:/10 text-006. "Error Records
WRITE:/10 SY-ULINE(17).
SKIP.
IF it_error IS INITIAL.
WRITE:/ text-007. "No error records
ELSE.
WRITE:/ text-009, "Total number of erroneous records
35 v_ne.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_error.
WRITE:/4 it_error-lifnr,
17 it_error-tabix CENTERED,
30 it_error-error_rec.
ENDLOOP.
REFRESH it_sucess.
REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include ZMM_INCL_PURCHASEORDERKB01
DATA: it_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
sucess_rec(125),
END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
error_rec(125),
END OF it_error.
Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu. "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12). "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12). "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
GROUP = SPACE. "OR USER = SPACE.
MESSAGE E613(MS).
ENDIF.
create batchinput session *
FORM OPEN_GROUP.
IF SESSION = 'X'.
SKIP.
WRITE: /(20) 'Create group'(I01), GROUP.
SKIP.
*----open batchinput group
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = GROUP
USER = sy-uname.
WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
(12) 'returncode:'(I05),
SY-SUBRC.
ENDIF.
ENDFORM. "OPEN_GROUP
end batchinput session *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
(12) 'returncode:'(I05),
SY-SUBRC.
ELSE.
IF E_GROUP_OPENED = 'X'.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /.
WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
ENDIF.
ENDIF.
ENDFORM. "CLOSE_GROUP
Start new transaction according to parameters *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
WRITE: / 'BDC_INSERT'(I03),
TCODE,
'returncode:'(I05),
SY-SUBRC,
'RECORD:',
SY-INDEX.
ELSE.
REFRESH it_MESSTAB.
CALL TRANSACTION TCODE USING it_BDCDATA
MODE CTUMODE
UPDATE CUPDATE
MESSAGES INTO it_MESSTAB.
L_SUBRC = SY-SUBRC.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
ENDIF.
Message handling for Call Transaction *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
IF E_GROUP_OPENED = ' '.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = E_GROUP
USER = sy-uname
KEEP = E_KEEP.
E_GROUP_OPENED = 'X'.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM. "BDC_TRANSACTION
Form subr_bdc_table *
text
-->P_0220 text *
-->P_0221 text *
-->P_0222 text *
FORM subr_bdc_table USING VALUE(P_0220) TYPE ANY
VALUE(P_0221) TYPE ANY
VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
CLEAR it_bdcdata.
it_bdcdata-fnam = P_0221.
it_bdcdata-fval = P_0222.
APPEND it_bdcdata.
ELSE.
it_bdcdata-dynbegin = P_0220.
it_bdcdata-program = P_0221.
it_bdcdata-dynpro = P_0222.
APPEND it_bdcdata.
ENDIF.
ENDFORM. " subr_bdc_table
Form subr_mess_hand *
text *
-->P_G_MESS text *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = it_messtab-msgid
LANG = it_messtab-msgspra
NO = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
MSG = P_G_MESS
EXCEPTIONS
OTHERS = 0.
CASE it_messtab-msgtyp.
when 'E'.
it_error-error_rec = P_G_MESS.
it_error-lifnr = it_me21-lifnr.
it_error-tabix = v_count.
APPEND IT_ERROR.
when 'S'.
it_sucess-sucess_rec = P_G_MESS.
it_sucess-lifnr = it_me21-lifnr.
it_sucess-tabix = v_count.
APPEND IT_SUCESS.
endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM. " subr_mess_hand
Also refer
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bdc-table-control-668404
and
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
srinivas
<b>*reward for useful answers*</b> -
Work flow issue in Guided Procedures
Hi,
I have one issue in work flow implemented in Guide procedures with Webdynpro java.
I have webdynpro application which developed and deployed in NW 7.0 SP3 version. The particular application request has suppose to be get approved by 5 users but after approving the 2 users, with out getting approved by other 3 remaining users it got approved the request completely. i need to trouble shoot this work flow issue. Can any body tell me how to troubleshoot this issue. why work flow not triggered for the last three users.
Please let me know what are the steps for trouble shooting or monitoring the GP issues.
Thanks
vijayHi Vijay,
There are a few roles for GP Administration. Once you assign these roles to your users, you can test , edit and trouble shoot Guided Porcedures, from Guided Porcedure Runtime Tab.
First ask the portal admin to assign these roles to you and then you can check what is wrong with the corresponding GP.
Hope it helps,
Sattam. -
ISupplier Portal work flow issue
Hi All,
In iSupplier Portal, during registration (new user creation) it will call a Workflow to send notification for notifying buyers about the registration of supplier.
We can see the workflow process set(named: Supplier User Registration Workflow : POS_REG ) using Workflow Builder.
This work flow sends a notification mail to the registered user which includes external URL (which is present in the profile option: "POS External URL") used to login.
Our requirement is to send custom URL to the newly created user.
Modifying profile option: "POS External URL" value is not serving our purpose.
Our approach is to find out the process needs to be customized and create a custom workflow similar to seeded one and call this custom work flow during user registration/creation.
From the above work flow we are able to find out the process (calling PL/SQL procudeure – “POS_REG_WF_PKG.SetApprvItemAttrValues”) which needs to be customized.
1) BUT, we can't find where this process is refered from the self service page ?
If we check the controller of the user restration page, it is calling a PL/SQL procudeure named “FND_REGISTRATION_UTILS_PKG.publish_event”.
2) But, could not able to find any link between the procedures “FND_REGISTRATION_UTILS_PKG.publish_event” and “POS_REG_WF_PKG.SetApprvItemAttrValues”.
3) Can you suggest any other apporach to fulfil the requirement ?
Your help is appreciated.
Thanks in advance.
Regards,
S.K.Thanks for your responce Sumit.
While debugging the procedure "FND_REGISTRATION_UTILS_PKG.publish_event" we found that it is calling a business event. We followed the below steps to resolve the issue:
1) For the business event “oracle.apps.fnd.umf.reg.user_approved” we need to disable existing seeded work flow subscription
2) Keep the internal name of workflow as same, modify the standard workflow by adding new custom process to it.
3) Create a new subscription under the business event to call custom process of work flow form it.
4) Create custom package of “POS_URL_PKG” and call this from the above created custom work flow process
5) Custom package “POS_URL_PKG” gets the Custom URL which needs to be send to user
Regards,
S.K. -
Work flow for Goods issue MIGO_GI
Hi friends,
I want to develop a work flow for good issue MIGO_GI transaction. Is there any standard work flow this scenario.
When I deliver the 4 materials, the Material cost is 100*4 = 400, if the Material cost is greatr than 500, mail should trigger to the manager, if it less it will go to the first approver.
please advice me in this.,
regards,
AjayI think no stanadard workflow will provide you with such a validation, Better to design your own customized workflow template,
Follow the below steps.
1. Open PFTC select the task type workflow template
2. Click F5 and define the relevant fields and make the agent assignemnt for the workflow template as general task from the menu addtional agent ---> agent assginement --> maintain --> general task.
3. Check the BOR BUS2017 this might be useful.
Check the method GoodsMovement.SAPCreate and its parameters interface, if you can get the total values of the then include a condition and validate th total cost if is satrisfyies send mail and workitem to approver, if it does not satisfy then send only workitem to approver.
Check the below BADI's
MB_BAPI_GOODSMVT_CREATE MB_GOODSMOVEMENT
MB_BATCH_MASTER MB_GOODSMOVEMENT
MB_DOCUMENT_BADI MB_GOODSMOVEMENT
from where you can trigger your customized workflow by using the standard fm SAP_WAPI_CREATE_EVENT or SAP_WAPI_START_WORKFLOW* -
Work flow and tables related with ESS Travel Module
Hi Experts,
I am new for work flow. Presently I am working for SAP ESS / MSS Travel module. Can you please let me know the names of work flows and tables related with ESS Travel module.
Regards,
GaryHi Gary,
Check if this [thread1|Let us learn SAP ESS Travel] [thread2|Travel Management Tables] helps you.
Regards,
Saumya -
Tables for Work flow levels in IMA11
Dear Experts,
Can any one help me out in finding the tables for WORK FLOW Approval Levels and where these tables(standard tables in SAP) are stored in? or can anyone give me the list of tables for workflow in Investment management in IMA11 for approval levels?
Thanks,
sanju..Hi Sanju,
For IMA11, please refer the table IMAK.
Hope it will be useful. Appreciate with point if it is useful.
thanks
Vetrivelan -
Clean up of work flow logs entries (WFMC) from tables CMFP and CMFK
Hi,
I am cleaning up the tables CMFP and CMFK for work flow logs entries with app id WFMC. I used the cleanup programs RSCLNAFP, RSCLCMFP but the entries are still seen on the tables. Can anyone please advice ?Hey,
I think notes: 627257, 758952 would help.
if not, please read notes 52114, 617634, and:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25c1f5d1-0901-0010-d495-e96d02a0cb01
the link above advice to run transaction NACE:
To avoid unnecessary growth of tables CMFP and CMFK, you can prevent the creation of processing logs by following these steps:
1. Call up transaction NACE (Conditions for Output Control).
2. Choose the desired applications and then Output Types.
3. Double click on the output type to go to the detail view where you can make the necessary settings. To make the settings you must enter the change mode.
4. Set the indicator do not write processing log and save your settings.
This setting is only applicable to the individual application and output type. If it is set, processing logs will be collected in the main memory, but they will not be written to the database. Other output types are not affected by this setting. You have to repeat the aforementioned steps for each output type individually. It is not possible to switch off the processing log for all output types at the same time. For more information on the setting do not write processing log see the corresponding documentation. -
Hi,
How can i delete the work items from my work flow? plz suggest....
Thanks in advance...
Ramesh...Check these links..
Re: DELETE workitems!
http://help.sap.com/saphelp_nw04s/helpdata/en/f4/843239cb0211d1950d0000e82dec10/content.htm
Maybe you are looking for
-
Dear All, In foreign currency valuation - i have one query. When we run the foreign currency valuation in SAP system posts one entry - that's for Exchange rate gain or loss, but why there is a reversal entry posted on next day. What entry is posted o
-
Need to be enlightened on Parent, Child object assignments
Hi! I am too boggled with parent class, child class objects assignments. For example say I have something like this: class parent{ int a; void doStuff(){...} class child extends parent{ int b; void doOtherStuff(){...} }Ok. Now. if have have
-
4s trouble with wifi. it connects however is very slow then switches back to 3g
If anyone out there could help I would appreciate it! iphone 4s brought as a replacement form Apple on the 6 September 2013 has developed an issue! I can connect to my home BT HomeSpot however its so slow and will then go back to 3g, so frustrating!
-
I can't get my document to save a PDF with the bleed area, it shows the cropmarks but not bleed area. Also in my Object tab I do not have the option of Crop area. Please help
-
I need to create a new admin account. but i lost the cd that came with the macbook, and forgot my password. also can the cd be replaced.