Workbook: view key and description in the same cell.

Hi Developers,
I'd to Know if it is possible to see (in the workbook) in the same excel's cell the Key and the denomination and not in two different cells.
Thanks in Advance!
Domenico

Hi Domenico,
let's suppose you have an InfoObject (ZIOBJ) with short medium and long descriptions and that you do feed such values using a DataSource for texts. In the Trasfer Rule you map ZIOBJ 0TXTSH, 0 TXTMD and 0TXTLG to 4 different fields ZVALUE, TXT_SH, TXT_MD and TXT_LG of a Transfer Structure.
You could write a simple ABAP Routine for the 0TXTLG as:
CONCATENATE ZVALUE, TXT_MD SEPARATED BY SPACE INTO RESULT.
Hope it's clear.
GFV

Similar Messages

How to show display attributes like key and description in voyager

This question is on voyager connecting to SAP BI Query. I would like to show both key and description of the row member. It is mentioned in the guide that display attributes can be viewed and changed from the properties tab of the tab panel. But I didnt see any such option in properties tab.
Any solution for this?
Thanks
Raghu

It is a XI 3.0 version. I looked at Voyager user guide for XI 3.0 in page no 202. It is about Using Voyager with SAP
"Display attributes
Members have several string properties which are visible in Voyager:
u2022 Key
u2022 Short description
u2022 Medium description
u2022 Long description
u2022 Key and short description
u2022 Key and medium description
u2022 Key and long description
These string properties can be viewed and changed from the Properties tab
of the Tab panel.
Note: Key and text properties are concatenated into a single string, and are
therefore displayed in a single column or row caption field. They do not
appear as separate columns or rows."
Thank you very much.
Raghu

HT201321 Numbers pad 4 5 6 and the up down arrow key quit working. I swithched keybouards (Both are Apple, and still have the same problem, its not hardware.)

The 4 5 6 keys and the up down arrows do not work.
I had the Cap C off for a While Had hit some key command
that shut it off so I got a new keyboard and it did the same.
HAs anyone had this problem

Does the problem happen if you reboot the system into Safe Mode by holding the Shift key at startup?
Additionally, does the problem happen if you create a new user account in the Users & Groups system preferences and log into that?

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Recording Audio and Midi at the same time in Logic 7 Express Can it be done

I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

Can we use both INSERT and UPDATE at the same time in JDBC Receiver

Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,

Hi ,
          If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
    Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
    There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam

Web reporting - variable selection should be display as key and description

hi experts,
Can anybody tell me the solution for my issue. My isssue is , in the web reporting, i have variable company code, i am selecting the company code thru search help. the values for company code is displaying with key.
the new requirement should be displayed with key and description.
I have checked in the bex, the properties of company code has maintained as key. when i run the report when cas selet as key and descritption. bex is not a probelm.
only the problew with webreports, can anybody give some inptus on my issue.
Any help is appreciated. waiting for your response.
thanks
surendra sheety

For future reference, this question was finally answered correctly recently in the following thread:
F4 help - Search values - I need key and text
Hope this helps someone who is as confused about this as I have been the past few days!
Bob

Parameters and report on the same page

I am new to HTML_DB. I would appreciate your help with the following:
I have html page with items(parameters) and report on the same screen.
Items are:
Customer: Select list with Submit
Invoice No.: Select list - Populated invoices numbers for the selected customer
Department: Select List
Prod Month: Date Picker
Button: Report View.
Users can select any of the above parameter to create a report. The problem is when I don't select any customer and just select the department or prod month and click on a Report View button, I get SQL error in the Invoice Number item.
It seems when the page refreshes to create a report Invoice Number items sql query is executing but when it does not find the customer name, its giving the error.
If I select a customer name, the page gets refreshed and the report is generated. I dont want to create a report when they select a customer. I want them to select the parameters and click on the Report View button to create the report on the same page.
Thank you.
Regards,
Rek

Sounds like you are building the query string and submitting that and the fact that they leave something out messes up that string...<br><br>If that's the case, you can add validations to the page to make sure they enter in all the appropriate information.<br><br>
chet

How do I combine text and photos on the same page in iPhoto using photobook

How do I combine text and photos on the same page in iPhoto using photobook?

You mean while creating a book in iPhoto? Click on the layout button while viewing a page and select the layout that includes both text and photos. Most themes will have those options.
OT

The same itunes Library and playlists on the same computer with two systems

I want to have the same itunes library and playlists on the same computer with the two different Os 10.3.9 and 10.4.9 each one on the different disk. without copy this in the itunes folder (because my library its 30Gb)
I have the same user name on the Os. I use the same version of itunes in both systems
I use my ipod to play the library but its not the best solution (i lost my library in ipod twice because I confused from what os was synchronized)

Hello and Welcome to Apple Discussions.
Amalgamate the two iTunes libraries. Then load iTunes and hold down the Option/Alt ⌥ key and then choose "Choose Library" and then point both copies of iTunes to use the combined iTunes library.
regards
mrtotes

Itunes asking me my billing verification again and again on the same computer. I don't know why it behave like this. Anyone can solve my problem?

Itunes asking me my billing verification again and again on the same computer. I don't know why it behave like this. Anyone can solve my problem?
I already provided my 3 digit CVV number but Itunes again need to confirm the code whereas on my Office Computer I am purchasing Apps on Itunes without verifying my billing information again and again except once at the time of creation of account.
Please help me as I am charging by my Credit Card bank by US$ 1 each time when I give verification code.
Thanks
Talat Khatri

Try the following steps,
Sign into your computer and removal of credit card information. Here are the steps:
1) Open iTunes and sign in to the iTunes Store.
2) Select "View My Account" from the Store menu.
3) Enter your password and click the View Account button.
4) Click the Edit Payment Information button.
5) Select "None" as the payment type.
6) Click the Done button at the bottom of the page.
Reset your account password from the following link:
http://iforgot.apple.com
Phase 3:
Download a free content on to get recognized in iTunes.
To ensure your account is functioning, try downloading a free item from the iTunes Store. To do this, navigate to the iTunes Store main page by clicking the Home icon near the upper-left corner of the window. Scroll down and click the "FREE ON iTunes" link near the bottom of the main page, then select an item to download.
After you are able to download the free App try updating the billing information as usual.

Can I unstall Office 2011 from a Macbook and re-install the same software on a different Mac/Mackbook?

Hi all,
I’ve looked around Google and here and I can’t find a definitive answer to my question so hopefully you guys can give me some advice
I bought the Office package in 2011 when it was new and installed it on my Macbook. I now plan to buy an iMac for the purpose of studying so I'd like to remove it from my Macbook and transfer it to the new Mac. My Macbook is running on the current highest software (the name escapes me at present, I'm not on it to check) and I assume the Mac will be too. If I were to uninstall everything, would I be able to use the same disc (i.e. same unique code) on the other computer? I believe I only have the 1 disc 1 Mac version so can't have two running with the same software.
Ideally I'd not like to buy another Office package so any advice would be much appreciated. I realise I may not have much choice though...!
Many thanks for your assistance.
Kind Regards,

New Mac's come with OS X 10.8 so you would have to check compatibility of your software with the new OS X versions.
http://roaringapps.com/apps:table
Next you will have to check if the software will install or not on 10.8 from the disk, since the disk is static it can't change for newer OS X versions, however the software itself might run fine if a more recently updated version is downloaded and installed, then the license key entered.
Far as licensing concerns, you will have to check with the developer how to go about deauthorizing, uninstalling and getting a new license key for the new machine or if you can continue to use the existing one.
Most licenses are for one machine, however some can be multiple machine packs.
If you don't exactly need Office specifically to work with other Office users, you can also install the free LibreOffice and it can open your Office files.
The thing with Office is it's widely used in businesses, so if you learned it already then it doesn't make much sense to continue using it and paying money for only personal use.
https://www.libreoffice.org/
LibreOffice is truly cross platform, Linux, OS X and Windows. The files are easily exchange and many Mac users are thrilled using it apparently as the developers have commented a great deal of Mac users are installing it.
If you have trouble installing, it's likely Gatekeeper security that's on the new 10.8 machines, simply hold control key and click on the installer/program and select "Open" and it will remmeber it's a trusted program from then on.

Can I run Tiger and Leopard on the same computer

Hi folks.
I've been meaning to install Leopard for ages but have never got round to it (I bought the retail box when it first came out). I have upgraded my RAM to 2GB and my hard drive to 320GB with no problems.
My upgraded hard drive has been partitioned into 2 equal parts of 160GB. These appear on desktop as Mackintosh HD1 and HD2. HD1 is the disk with all my files, music, OS etc and HD2 is empty
I have 2 bootable clones of my present system - one is on a 160GB external and the other is the original 80GB HD that I replaced.
My question is this - can I install Leopard on to my 160GB external HD, then clone it on to the empty HD2. If I do this would I be able to run both Tiger and Leopard on the same Macbook?
Is there any problems with this plan? Would I be able to transfer between the 2 OS and how do I install Leopard on the external drive. Is it just a case of inserting the Leopard DVD and choose the external drive as the target?
As usual thanks in advance
Del

# Original Tiger in the internal HD, New Leopard in the external HD.
# New Leopard in the internal, Legacy cloned Tiger in the external.
# Split internal, one partition with Tiger, another with Leopard.
Leopard is backwardly compatible with older Macs, just make sure yours fulfills the minimum system requirements, both use the same filesystem format, so each can see the other. You can't run both at the same time, unless you purchase the server version of Leopard and run it virtualized. 99.9% of Firewire external HD's are bootable, some USB's are bootable but have to test first. You can choose which system to boot from by pressing the Option key at boot time, before the chime. Just make sure the external HDD is plugged in and turned on if that's where you want to boot from.
When I migrated my PBG4 from Panther to Tiger, got an external FW HDD, cloned Panther onto it, upgraded using Archive and Install, cleaned up, customized and tested it. When I was satisfied all was ok, cloned the original Panther onto another partition of the external HDD, wiped and tested for failure the internal HDD, then cloned the known good and tested Tiger into it. Only thing that died along the way was my old and ancient Photoshop v2.x, that refused to run on Tiger.

Error Running Oracle Apps and Discoverer at the same time

Hello,
We are having trouble running Oracle Apps and Discoverer at the same time on certain user's machines. Here are the specifics:
The user opens Oracle Apps in Internet Explorer. The user then opens Discoverer in another Internet Explorer windows and receives the following error: Runtime Error! Program: C:\Program Files\Internet Explorer\iexplore.exe abnormal program termination
As a work around, I installed Firefox on those user's machines. These users run Oracle Apps in Internet Explorer and run Discoverer in FireFox. This has solved the problem in 99% of the cases. However, there is one user who is having FireFox using Discoverer freeze when running Oracle Apps in Internet Explorer.
Can anyone provide any insight on how I can solve these conflict issues so users can run Oracle Apps and Discoverer at the same time?
Thanks in advance for your help,
Carlos

Hi Michael,
I agree with you completely. It is reccommended to run 10g on a separate physical server unless you have sufficient resources to run on the same server (which even most large clients do not) Even then, I would recommend a separate server.
I should have put my comment in context :-)
a.) I was only stating that it was possible
and
b.) whether 10g is installed on the same physical server or separate should not affect the client browser crashing issue that was posted.
I do have an install with EBS11i and Discoverer 10g on the same physical server and it works fine (this is sandbox/ TEST). Most of my large customers have 10g installed on multiple physical servers due to load balancing (capacity).
I do work for Oracle. I try to help out on the forum when I can, but it is hit or miss :-(
I would be glad to discuss anything privately.
As for the issue at hand, I can reproduce the problem and here is what is occuring.
I have EBS 11i configured with Jiniator 1.3.24
I have Discoverer 10g configured with Sun Java plugin 1.4.2_06
1. If you launch EBS 11i apps and a form with MS IE, then the browser launches the form using Jiniator JRE 1.3.xx (whatever you have configured in AutoConfig for EBS11i)
2. Next, the user navigates to EBS 11i SSWA and launches a Discoverer workbook.
What occurs is a child IEXPLORE.exe process is spawned from the parent IEXPLORE.exe process and Discoveer Plus is launched. The parent iexplore.exe process will be attached to the Jiniator JVM. Now if Discoverer is configured with
a.) Sun Java Plugin or
b.)a version of Jinitiator that is a different version from what EBS 11i is configured with
then you may get this conflict.
It really is an MS IE/JRE conflict with Jinitiator and Sun Java Plugi and the way the broswers attaches to the JVM (IMHO) as this behaviour could be reproduced with other non-oracle java applets.
You can workaround the situation by:
a. configure EBS11i and Discoverer to use the same version of Jiniator 1.3.xx
b. educate the users to open one MS IE browser to connect to EBS11i and then open a second MS IE browser to login to EBS11i SSWA or Discoverer 10g Plus directly to launch workbooks. They need to to this by clicking on the icon and not using File >> New browser. Clicking on the icon will spawn a new parent iexplore.exe process that can attach to a second/different JVM. File >> New Window will spawan a child of the parent.
c. As you did use two browser versions. MS IE for EBS11 connection and FireFox for Disocverer 10g connection.
I would choose optoin b, so that you can use Sun Java Plugin with Discoverer.
Open to any comments. I hope that helps you workaround the problem. The ideal solution is to have EBS 11i use/cerified with the 1.4 or 1.5 JRE. In poking around, I see there is a related post to this on one of Oracle's EBS 11i Product Managers Blog.
See:
http://blogs.oracle.com/schan/2006/04/18#a23

JTable fixed Row and Column in the same window

Hi
Could anyone tip me how to make fixed row and column in the same table(s).
I know how to make column fixed and row, tried to combine them but it didnt look pretty.
Can anyone give me a tip?
Thanks! :)

Got it to work!
heres the kod.. nothing beautiful, didnt clean it up.
* NewClass.java
* Created on den 29 november 2007, 12:51
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package tablevectortest;
* @author Sockan
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.table.*;
import javax.swing.event.*;
public class FixedRowCol extends JFrame {
Object[][] data;
Object[] column;
JTable fixedTable,table,fixedColTable,fixedTopmodelTable;
private int FIXED_NUM = 16;
public FixedRowCol() {
    super( "Fixed Row Example" );
    data = new Object[][]{
        {      "","A","A","A","",""},
        {      "a","b","","","",""},
        {      "a","","c","","",""},
        {      "","","","d","",""},
        {      "","","","","e",""},
        {      "","","","","","f"},
        {      "","b","","","",""},
        {      "","","c","","",""},
        {      "","","","d","",""},
        {      "","","","","e",""},
        {      "","b","","","",""},
        {      "","","c","","",""},
        {      "","","","d","",""},
        {      "","","","","e",""},
        {      "","","","","","f"},
        {      "I","","W","G","A",""}};
    column = new Object[]{"A","B","C","D","E","F"};
    AbstractTableModel fixedColModel = new AbstractTableModel() {
      public int getColumnCount() {
        return 1;
      public int getRowCount() {
        return data.length;
      public String getColumnName(int col) {
        return (String) column[col];
      public Object getValueAt(int row, int col) {
        return data[row][col];
      public boolean CellEditable(int row, int col) {
        return true;
    AbstractTableModel    model = new AbstractTableModel() {
      public int getColumnCount() { return column.length-2; }
      public int getRowCount() { return data.length - FIXED_NUM; }
      public String getColumnName(int col) {
       return (String)column[col+1];
      public Object getValueAt(int row, int col) {
        return data[row][col+1];
      public void setValueAt(Object obj, int row, int col) {
        data[row][col+1] = obj;
      public boolean CellEditable(int row, int col) {
        return true;
    AbstractTableModel fixedTopModel = new AbstractTableModel() {
      public int getColumnCount() { return 1; }
      public int getRowCount() { return data.length - FIXED_NUM; }
      public String getColumnName(int col) {
       return (String)column[col];
      public Object getValueAt(int row, int col) {
        return data[row][col];
      public void setValueAt(Object obj, int row, int col) {
        data[row][col] = obj;
      public boolean CellEditable(int row, int col) {
        return true;
    AbstractTableModel fixedModel = new AbstractTableModel() {
      public int getColumnCount() { return column.length-2; }
      public int getRowCount() { return FIXED_NUM; }
      public Object getValueAt(int row, int col) {
        return data[row + (data.length - FIXED_NUM)][col+1];
    table = new JTable( model );
    table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
    table.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
    fixedTable = new JTable( fixedModel );
    fixedTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
    fixedTable.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
    fixedColTable= new JTable(fixedColModel);
    fixedColTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
    fixedColTable.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
    fixedTopmodelTable = new JTable(fixedTopModel);
    fixedTopmodelTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
    fixedTopmodelTable.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
    JScrollPane scroll      = new JScrollPane( table );
     scroll.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
     scroll.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
    JScrollPane fixedScroll = new JScrollPane( fixedTable ) {
      public void setColumnHeaderView(Component view) {}
    fixedScroll.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
    fixedScroll.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
    JScrollBar bar = scroll.getVerticalScrollBar();
    JScrollBar dummyBar = new JScrollBar() {
      public void paint(Graphics g) {}
    dummyBar.setPreferredSize(bar.getPreferredSize());
    scroll.setVerticalScrollBar(dummyBar);
    final JScrollBar bar1 = scroll.getHorizontalScrollBar();
    JScrollBar bar2 = fixedScroll.getHorizontalScrollBar();
    bar2.addAdjustmentListener(new AdjustmentListener() {
      public void adjustmentValueChanged(AdjustmentEvent e) {
        bar1.setValue(e.getValue());
    JViewport viewport = new JViewport();
    viewport.setView(fixedColTable);
    viewport.setPreferredSize(fixedColTable.getPreferredSize());
    fixedScroll.setRowHeaderView(viewport);
    fixedScroll.setCorner(JScrollPane.UPPER_LEFT_CORNER, fixedColTable
        .getTableHeader());
    JViewport viewport2 = new JViewport();
    viewport2.setView(fixedTopmodelTable);
    viewport2.setPreferredSize(fixedTopmodelTable.getPreferredSize());
    scroll.setRowHeaderView(viewport2);
    scroll.setCorner(JScrollPane.UPPER_LEFT_CORNER, fixedTopmodelTable
        .getTableHeader());
    scroll.setPreferredSize(new Dimension(600, 19));
    fixedScroll.setPreferredSize(new Dimension(600, 100));
    getContentPane().add(     scroll, BorderLayout.NORTH);
    getContentPane().add(fixedScroll, BorderLayout.CENTER);
public static void main(String[] args) {
    FixedRowCol frame = new FixedRowCol();
    frame.addWindowListener( new WindowAdapter() {
      public void windowClosing( WindowEvent e ) {
        System.exit(0);
    frame.pack();
    frame.setVisible(true);
}

Workbook: view key and description in the same cell.

Similar Messages

Maybe you are looking for