Workflow changes not getting transported to test environment.

Hi All,
I want to send the WorkFlow error mail to a set of people.
For that i have changed the "receipt type" and the corresponding "Email Address" container for the error mail. A tranport request is getting generated for the changes, and when i transport the request to test environment, it is successfully getting transported but the changes are not getting reflected.
Is there a different procedure to transport these kind of changes?
or
Am i doing some mistakes while doing the changes?
Thanks

Hi,
Once the changes are moved to test system, some times because of the buffer not cleared, you may not see the changes.
May be try clearing the buffer using SWU_OBUF.
Regards,
Nangunoori.

Similar Messages

Contents of new costing variant, valuation variant and costing sheet not getting transported

In our development client,I have created a new costing variant, a new valuation variant and a new costing sheet in separate transports.
When I release the transports to move into the Test client, the contents of the configuration are not getting transported at all.
I tried to do them again manually using Table view - Transport , but again, if I view the transports in SE10,they don't show the table contents, etc.
Any help on this will be highly appreciated.

Ajay,
Let me make sure I understand.
Create a new TR using SE01
Go to transaction OKKN (costing variant)
Select the costing variant and then choose Table view - transport
Provide the transport number
At what point to I say 'include in request'
If I try to use the menu option Edit-Transport-Include in request in the beginning itself, the 'Include in request' is greyed out.
This is where I'm stuck

SAP Script not getting transported to Production server

Hi Friends,
The office address in the Purchase Order has been changed using T-code SE71. The changes are getting transported to QA Server, but not getting transported to Production Server.
Kindly let me know why this change is not getting transported to Production server and also guide me to correct the same.
TIA.
Regards,
Mark K

solved.

Screen Exit not getting transported - Urgent

Hello Everyone
We are implementing the enhancement PPCO0012 to display additional data in a tab on the Production Order Header. Did everything as per the documentation and activated the enhancement in SMOD and the associated project in CMOD. The transports were released to QA. The enhancement and CMOD project is also active in QA. However the screen object that was created under the function group XCO1 did not get transported to QA. Has anyone experienced this kind of a situation before?. Can you please suggest any solution to overcome this? Any help is greatly appreciated.
Thanks
Raju Ramaswamy

Hi,
Can you give me the Enhancement name?
I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

Group title in Floor plan manager is not getting transported to quality

HI Experts,
In Component Configuration "EHHSS_INC_REC_NRM_QAF_V3_BSCI", I have added group and gave title to that group in development.
The group is getting transported when I release request but the title is not getting transported.
Could anyone help me, it's urgent.
Thanks and Regards,
Santhoshi.

posting again,
Can anyone help me as this is urgent requirement.
With Regards,
Santhoshi

Workflow is not getting invoked

I have created a workflow to call a outbound Webservice. It updates the Account that is created in the Siebel 8 on to the external system.
The problem occurs when I try to update the Account more then 2 times. I am able to update the Account 2 times but after that the workflow is not called at all.
Also, I have checked that there is a field called modification_num in s_org_ext that gets updated everytime I update the Account. When this fields value goes beyond 2 the workflow dosent gets invoked.
Also, I have tried to change the policies just to make sure that they are not interfering but dint help.
Also, I am trying to update only one field (Account Type) as for the test purpose there is only this field that I have mapped.
Thanks :-)

Hi,
Change it to following code. It will work.
REFRESH ACTOR_TAB.
CLEAR ACTOR_TAB.
*IF SY-SUBRC NE 0.
*RAISE NOBODY_FOUND.
*ELSE.
ACTOR_TAB-OTYPE = 'US'.
ACTOR_TAB-OBJID = 'XXXX'.
APPEND ACTOR_TAB.
ACTOR_TAB-OTYPE = 'US'.
ACTOR_TAB-OBJID = 'XXXXXX'.
APPEND ACTOR_TAB.
*ENDIF.
Regards,
Vaishali.

Bank master data changes not getting tranported to another client

Hi all
While i am making changes to the bank master data, they are not reflected in the transport to another client.
Please let me know how to do this.
Thanks
ES

Hi
While creating the house bank , i created the bank master using the create button.
This was saved in the transport request and moved correctly through the transport.
Now i find that the description etc. to be changed in FI02. I have done the changes.
These changes when transported do not get reflected in the new environment.
Please let me know the reason.
Thanks & Regards
ES

Company address not getting transported

Hi friends,
I have a new co code and the co address has not been transported to the target client. I have retransported the request again in OX02, but still the details are not getting updated in the Transport Request.
Does anyone know how to get through this issue?
Any help will be highly appreciated.
Thanks,
Hrishi

Hi,
Please go to OBY6, select your company code and change the address. Come back again to OBY6, there you have transport options, plaase check the menu settings in the top of this screen.
Rgds
Murali. N

Changes not getting captured in MM06E005 of ME22N

Hi,
My requirement is to add an additional tab at Item Level and a field in that tab. I used the MM06E005 and implemented it. I can see the tab and the field in it at Item level.But when iam making changes in ME22N,the change is not getting Saved.
i created a field   ZZVEND type char in CI_EKPODB .
Created the check box with same field name in Screen Exit 0111 of MM06E005.
Then i kept the coding in following exits
EXIT_SAPMM06E_016
break-point.
EXIT_SAPMM06E_017
break-point.
EXIT_SAPMM06E_018
break-point.
IF I_UCOMM = 'MESAVE' .
E_CI_UPDATE = 'X'.
E_CI_EKPO-ZZVEND = EKPO_CI-ZZVEND.
ENDIF.
While running ME22N,its first going into EXIT_SAPMM06E_016 and after checking the ZZVEND i in ME22N ts going to EXIT_SAPMM06E_017.
But i dont see
I_EKPO-ZZVEND = 'X' in Importing Parameters or TEKPO-ZZVEND = 'X' in Tables of EXIT_SAPMM06E_017.
After this its entering into
EXIT_SAPMM06E_018.
Finally the data is not getting Saved but the message is showing 'Purchase Order changed'.
Please suggest where I am going wrong.
Regards
K Srinivas

Thankyou for the replies. I kept the following coding in the Exits. The problem is that i kept the break-point in the three exits and after running ME22N,its entering first into Exit 16 and after checking the field(Check Box) in Customer Data Tab ,its entering into Exit 17. But the zfield in I_EKPO is empty,the value 'X' is not reflecting here. Please suggest where i am doing wrong. I went through many SDN threads and i am unable to solve the issue.
INCLUDE ZXM06TOP.
data: gl_aktyp type c,
      gl_no_screen type c,
      gl_ekpo_ci like ekpo_ci,
      gl_ekpo like ekpo,
      gl_ucomm like sy-ucomm.
data: gt_ref_ekpo_tab type table of ekpo_tab.
EXIT_SAPMM06E_016
gl_aktyp = i_aktyp.
gl_no_screen = i_no_screen.
ekpo_ci = i_ci_ekpo.
gl_ekpo = i_ekpo.
EXIT_SAPMM06E_017
move-corresponding i_ekpo to gl_ekpo_ci.
gl_ekpo = i_ekpo.
EXIT_SAPMM06E_018
e_ci_ekpo        = gl_ekpo_ci.
if gl_ekpo_ci-zz_vend ne ekpo_ci-zz_vend.
e_ci_ekpo-zz_vend = ekpo_ci-zz_vend.
if gl_aktyp ne 'A'.
    e_ci_update = 'X'.
endif.
endif.
Regards
K Srinivas

Reg: View changes not getting reflected

Hello All,
I made some view changes like field mapping for the Family Dependents view.
I Created the Activity and deployed using NWDI but the changes are not getting reflected.
Please assist me in resolving the issue.
What might have gone wrong? and how to solve the problem.
Thanks in advance for the time.
Regards,
Pramod

The issue is with the activities queued up in TCS Deployer.
Rerun the TCS deployer and the issue is solved.
Thanks,
Pramod

Bapi For Service Po change not Getting Changed

hi,
I need to change the qunatities in the Services tab of the PO to close it. So , I tried using BAPI_PO_CHANGE.
I passed the po number and the structures poservices and poserviceaccess .But it is not getting affected.
In the Bapi Documentation i read the following.
In method BAPI_PO_CHANGE, you can only create service items, you cannot change them.
Is there any way that any way i can change the service po.
Am i missing Something.
With thanks in advance,
Syed Ibrahim .G
Edited by: SYED_ibbu on May 26, 2011 11:45 AM
Edited by: SYED_ibbu on May 27, 2011 6:16 AM

Hi
Please go throug the following links.
<<links removed by moderator and points unassigned>>
Hope this will helps you.
many thanks,
Regards,
Kiran Kumar
Edited by: kishan P on May 27, 2011 11:30 AM

Standard workflow is not getting triggered

Dear all,
I have activated standard worflow for QM module for notification, but after saving notification workflow item is not getting diaplayed in Inbox.
Thanx & regards,
Harish.

Hi,
1) Check that workflow triggered or not in SWEL or in the Creator's (SBWP) Outbox --> Started workflows
2) If it was triggered, the agent determination might be failed
3) Also check whether you maintained that task as a General Task.
Regards,
Surjith

Workflow configuration not getting transferred

Hi All,
I have done all the configurations related to PO release strategy workflow but when transferred to Quality certain configuartion done in PFTC workflow builder are not getting transferred.
I also got message like 'release of purchase order transferred to buffer'.
Please guide.
Thanks in advance
Pavan HS

Hi Santosh,
What settings I have to do in PFCG. User is able to release PO in ME29N.
Thanks and Regards
Pavan

ISR Process object - Workflow is not getting triggered -

Hi
I am facing some strange problem, in my project we are using the new HCM concept using Process Object and not the Notification type,
I have take standard scenario SBC1 - child birth, done the config and checked the form and also process its not giving any error.
But when i tried test process execution "HRASR_TEST_PROCESS", getts error message " Work Item Not Found; Workflow Not Started" and "Process Object Not Created",
when i check the log in SLG1 tcode for Object: HRASR, Subobject: POBJ. "Case 46CC2D7604BB275EE1000000995893A9 does not exist. No administration authorization in Change and Transport System", this error message only consfuse me more.
Can you help me on this, if you required i will send the screen shot of the error message
Regards
Anand KS

In most cases, this means that the 'Start Process' is not configured correctly. Take a look at the following:
1. make sure that the Wf assigned to your start process is active
2. make sure that reference numbers are configured and assigned to your process
3. assign a user to receive error messages when an error occurs
Thanks,
Derrick Banks

Application Parameter not getting Refreshed when testing in another client

Hi,
I have created a WD application in development client 150 and the application has import parameter WORKITEMID. I am getting this value in the startup input plug-in. I am calling this application in the workflow as a activity step. For unit testing purposes I am defaulted the import paramater value to a 000546578. When I put a breakpoint in the startup method, I am able to get the value of WORKITEMID as 000546578. Once I have completed my application I have changed the defualted value to 000436477 and now I am trying to test in testing client 140, and in debugging I am able to stll 000546578 not the newly defualted value. This is happeening only in testing client.
When I debug and see the client 150, I am able to see the new value, but in client 140 still the old value is showing up at run-time when I test the application. But on the application parameter tab the new value is visible. Only the prb is at run-time its still picking up old value.
I am new to ABAP WD stuff. Can anyone help me out how to resolve this issue.
With Regards,
Sreekanth

Try using: weblogic.refresh
http://edocs.bea.com/wls/docs61/webapp/deployment.html#149386
Cheers
mbg
"Santosh Sahadevan" <[email protected]> wrote in message
news:3ef55cba$[email protected]..
>
Hey all,
We are developing an application in which the development enviornmentwhich we
have recieved from the clients ,(configuered bythe clients) which is sameas that
of the production env.
The web application is running in a cluster in a weblogic 6.1 env . Whenwe trying
to change the JSP, it doesnt get refreshed. We have to explicitaiilychanging
the jsp at the .wlnotdelete dir created , to take its changes . But as weknow
thats a temp place holder for the application .
Since we are team of 20 developers it becomes a real pain when weexplictially
try to stop and restart the server , just for changing a jsp.
Do we have a solution for the same.

Workflow changes not getting transported to test environment.

Similar Messages

Maybe you are looking for