Company address not getting transported

Hi friends,
I have a new co code and the co address has not been transported to the target client. I have retransported the request again in OX02, but still the details are not getting updated in the Transport Request.
Does anyone know how to get through this issue?
Any help will be highly appreciated.
Thanks,
Hrishi

Hi,
Please go to OBY6, select your company code and change the address. Come back again to OBY6, there you have transport options, plaase check the menu settings in the top of this screen.
Rgds
Murali. N

Similar Messages

  • SAP Script not getting transported to Production server

    Hi Friends,
    The office address in the Purchase Order has been changed using T-code SE71.  The changes are getting transported to QA Server, but not getting transported to Production Server.
    Kindly let me know why this change is not getting transported to Production server and also guide me to correct the same.
    TIA.
    Regards,
    Mark K

    solved.

  • Contents of new costing variant, valuation variant and costing sheet not getting transported

    In our development client,I have created a new costing variant, a new valuation variant and a new costing sheet in separate transports.
    When I release the transports to move into the Test client, the contents of the configuration are not getting transported at all.
    I tried to do them again manually using  Table view - Transport , but again, if I view the transports in SE10,they don't show the table contents, etc.
    Any help on this will be highly appreciated.

    Ajay,
    Let me make sure I understand.
    Create a new TR using SE01
    Go to transaction OKKN (costing variant)
    Select the costing variant and then choose Table view - transport
    Provide the transport number
    At what point to I say 'include in request'
    If I try to use the menu option Edit-Transport-Include in request in the beginning itself, the 'Include in request' is greyed out.
    This is where I'm stuck

  • Screen Exit not getting transported - Urgent

    Hello Everyone
    We are implementing the enhancement PPCO0012 to display additional data in a tab on the Production Order Header. Did everything as per the documentation and activated the enhancement in SMOD and the associated project in CMOD. The transports were released to QA. The enhancement and CMOD project is also active in QA. However the screen object that was created under the function group XCO1 did not get transported to QA. Has anyone experienced this kind of a situation before?. Can you please suggest any solution to overcome this? Any help is greatly appreciated.
    Thanks
    Raju Ramaswamy

    Hi,
    Can you give me the Enhancement name?
    I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

  • Group title in Floor plan manager is not getting transported to quality

    HI Experts,
    In Component Configuration "EHHSS_INC_REC_NRM_QAF_V3_BSCI", I have added group and gave title to that group in development.
    The group is getting transported when I release request but the title is not getting transported.
    Could anyone help me, it's urgent.
    Thanks and Regards,
    Santhoshi.

    posting again,
    Can anyone help me as this is urgent requirement.
    With Regards,
    Santhoshi

  • Workflow changes not getting transported to test environment.

    Hi All,
    I want to send the WorkFlow error mail to a set of people.
    For that i have changed the "receipt type" and the corresponding "Email Address" container for the error mail. A tranport request is getting generated for the changes, and when i transport the request to test environment, it is successfully getting transported but the changes are not getting reflected.
    Is there a different procedure to transport these kind of changes?
    or
    Am i doing some mistakes while doing the changes?
    Thanks

    Hi,
    Once the changes are moved to test system, some times because of the buffer not cleared, you may not see the changes.
    May be try clearing the buffer using SWU_OBUF.
    Regards,
    Nangunoori.

  • Customer Address Not getting replicated to CRM

    Hi,
    In CRM system we had created on BP and replicated to ECC system. Replication was done successfully. In ECC now we had modified some of the details like Name, Address, contact details. From this updated details only address is not getting replicated to CRM system.
    While all the other data which are modified are getting replicated to CRM system. In case if some one has encountered this issue then please me know the solution step.
    Does SAP support the modification and replication of business partner address from the third system (System in which it is not created)
    With Regards
    Ankush Rai

    Hi Rai
    Please check the following thread , It may helpful your query
    Re: When replicating customer from ERP, the address is not replicated to CRM.
    Hope it solved your issue
    Regards,
    Naga.Srikanth

  • Vendor Address not getting printed properly in cheque printing.

    Hi
    While printing the vendor address for the cheque printing, for certain vendors the street no. is not getting printed & for certain vendors PO Box is not getting printed.
    In the program we are fetching vendor address from REGUH table & then passing onto the global variables which are being used in the script & data is there in the database table for both street & PO Box number.
    The code in the script is as follows:
    /:           ADDRESS PARAGRAPH UH TYPE '3'
    /:             TITLE    &W_ANRED&
    /:             NAME     &W_ZNAME1&,&W_ZNAME2&,&W_ZNAME3&,&W_ZNAME4&
    /:             STREET   &W_ZSTRA&
    /:             POBOX    &W_ZPFAC& CODE &W_ZPST2& CITY &W_ZPFOR&
    /:             POSTCODE &W_ZPSTL&
    /:             CITY     &W_ZORT1(28)&
    /:             COUNTRY  &W_ZLAND&
    /:             FROMCOUNTRY &W_LAND1&
    /:             ADDRESSNUMBER &W_ZADNR&
    /:           ENDADDRESS       
    Can anyone please let me know, what could be the possible reason for this?

    you can tyr with TYPE '1' or TYPE '2'
    : ADDRESS PARAGRAPH UH TYPE '3'

  • Changed IP address, not get "bad inetd address, cannot get hostname"

    I'm running OS 10.4.8 Server on a MacPro.
    I've changed the IP address and name of my computer. I ran changeip and updated the IP address and hostname under Preferences > Network and Preferences > Sharing. Everything seemed to be ok, that is, I can surf the web, read email, ssh to and from (most) other computers. There are two problems:
    1. I cannot "Connect to Server..." from my laptop. It claims that the "The server may not exist or is not operational at this time. Check the server name or IP address and try again."
    2. When I try to launch some software (Tecplot, to be precise, from an xterm) which requires contacting a license server, it claims that it "Cannot get host by name or bad inet address".
    Here's some additional information:
    A. If I run "nslookup <servername>" on my computer, I get
    ** server can't find vonkarman.mae.ufl.edu: NXDOMAIN
    However, if I run the exact same command on another local machine, I get the correct IP address (not suprisingly, I can ssh to my machine from that machine).
    B. If I run "hostname" on my computer, I get the right hostname.
    C. If I run "uname -a", I also get what I expect.
    Any help would be greatly appreciated!
    Thanks
    Andreas
    MacPro   Mac OS X (10.4.8)   Server

    more information is needed about your network config.
    Specifically, are you running NAT on the server? If so, how is it configured? Is the server's firewall enabled?
    Jeff

  • Ship-To Address not getting picked for one particular user

    Hi SRM Gurus,
    I am working on SRM5.0 system with ECC6.0 as backend.
    For one particular SRM user, the Ship-To address number which has been maintained in his attributes through transaction PPOMA_BBP, as default delivery address, is not populated when he creates a SC.
    This default ship-to address is not seen while creating the cart even though the address can be found via the F4 search help in the same SC.
    Can anyone tell me why this is happening for one particular user?
    Please note that this problem is occuring even when the user is shopping for self and creating a new SC (no copying from template). So SAP note 1055203 is not valid in my case.
    I have checked the ADRC table, and this address number exists. Infact, when I assign this address number to some other user's Ship-To attribute, this default delivery address is picked in the SC.
    So, I understand that the problem is not with the address, but with the linking of this address number to this user. I even tried deleting and re-assigning the address number in the attribute to this user. But, it doesnot work still.
    Can anyone help me out?
    Thanks n Regards,
    Ancy

    Ship to address not being picked from attributes for any user it was being picked from Org address data , and I had reset the value
    now , when I am trying to create a SC and I have tried to add delivery address  bby 2 types .
    1. By adding through the portal
    2> i have tried to add the same throgh ppomabbp in user attributes "Delivery address"
    I have also made it default however when I raise the SC it again shows me as blank :
    I am not too sure how do I populate the value that I need . Please see below still the delivery address is blank !!

  • House Bank Address Not In Transport

    Hi SAP Gurus,
    We added a new house bank in FBZP and entered all the necessary info, cocode, house bank, bank country, bank key, swift code, address, etc. However, when we moved the config to QA, the bank address is missing in the config that made it to QA.  All the following tables are in our transport: T012, T012D, T012K and T012T.
    We went back to our DEV box, entered the address again and manually triggered a transport. Still the complete bank address is missing in QA. Although we can manually insert the bank address in production. My question is, is there any reason why our transport is not allowing the bank address to be included or should the address be updated using Fi02? And shouldnu2019t FI12 directly update table BNKA? We are on ECC6 platform.
    Thanks,
    Keen

    Hi keen,
    Address data in a Bank Key can be transported but there is a special way of transporting the request to make sure that Address data is transferred to the QE0/PE0 clients.
    Follow the steps below:-
    1. Double click on the created transport request in SE10.
    2. Go to the Objects tab, and enter R3TR, TABU and BNKA in the 2nd 3rd and the 4th coulumn.. Pro_, Obj_, Object Name.
    3. Now double click on BNKA Object name and enter * for table contents under table keys.
    This way the address related data can be very well transported to other clients.
    Regards,
    SAPFICO

  • Personalisation of application not getting transported

    Hello experts,
    i've been scanning the forum for a day or 2 now but haven't found a (working)  solution to my problem.
    I made an custom field addition to the WDJ application for family data.
    By personalisation (right click on page and then "edit custom extension fields") i have added the custom field.
    I am not able to get this working on the QA server.
    I have tried transporting the role on which i did the personalisation, i have tranposrted the iview.
    I also transported the personalisation of the user i did the personilisation with. (other users see the changed i made on dev, so it's not prehibited to just the user i made the changes with)
    Restarted the portal server several times.
    Nothing seems to work.
    Any thoughts? Am i missing something?

    is this transportable?

  • E-mails landing in junk folder! FROM address not getting validated!

    Hi,
    I am designing an application which is going to send emails to a group of people in my office every month. I have been given a dedicated SMTP server for that.
    The java code which I have written is sending mails to its recipients but the problem is that they are landing in their junk folder.
    One thing I have found out is, the java code is not validating the FROM address. i.e even If I enter an invalid email id, It is being sent. The worst part is if I use a valid email id, it is not being recognized as a legitimate one.
    The FROM address in the mail is literally a "String" in which u can put anything! (Eg. The emails are being sent if I put the FROM address as "1234567"!! )
    One of the option is to make that mail as "not Junk" in the outlook. But I cant ask everyone to change their filter settings.
    Is there any way in which the java code can first authenticate whether the FROM address is existing and then send the email if it is valid. (I am not talking about the SMTP authentication!)
    I browsed a lot but couldn't find the answer for this. Please help me with this.
    Regards,
    harsha_t

    Sorry, I guess I wasn't clear. I was suggesting using Thunderbird as a debugging tool,
    not as a solution to your problem. Knowing whether or not it has the same problem
    would tell us whether the problem is some error in your program, or some magic in
    Outlook that allows it to work.
    If the ultimate destination mailbox is on some other server, then there's the server that's
    deciding whether the message you send is junk or not. It probably has nothing to do with
    the way you talk to your mail server. It might be something related to the content of the
    message you're sending. If you send a message with exactly the same content using
    Outlook, does it get sent to the junk folder?
    I've heard rumors that some spam filters will look at the Message-ID header and consider
    any message with a JavaMail-style Message-ID to be spam. (Apparently some spammers
    like to use JavaMail.) You might try overriding the default Message-ID with one of your own.
    Subclass MimeMessage, override the updateMessageId method, and set a value for the
    Message-ID header. Use something simple at first just to prove whether or not it makes a
    difference.

  • Specific Gmail email address not getting through to iCloud email address

    Hi,
    As of this morning I am not receiving emails sent from my wife's Gmail account to my iCloud email address. However, I can receive Gmail sent from my account to my iCloud email.  I can also receive email sent from my wife's gmx email address to my iCloud email address. So the problem seems to be with one specific Gmail address (as far as I am aware).
    Any thoughts/help/advice would be much appreciated.

    It seems to be a problem between Apple and Gmail mail servers. This issue is reported in many threads here and on google product forums.
    Are you getting other emails from Gmail accounts? If not, then call Apple and report this: 800-275-2273
    The more people that call, the more they become aware this is a widespread issue. They don't read these boards.

  • Company Name not getting Displayed in the incoming screen

    I changed my blackberry from earlier 0S 7 to Z10 two days ago, but to my surprise it is not displaying company name in the incoming call screen. I have more than 20 people whose name is repeating and not able to identify, how come this feature is not available in the new model, what is solution ?

    @ is a default value as per ALV internal process. This is used in icons .
    I think this is causing the confusion.
    Check in the fieldcat if there is any adjsutment to be made to handle this.
    Br,
    Vijay

Maybe you are looking for

  • How many times can I reinstall as a clean install with a family pack?

    Title says it all. Thanks for anyones help.

  • Entity object enum mapping

    Hi all, I'm using JDeveloper 11g, EntityObjects, and ADF Faces. I have a database field VARCHAR2(1), and its possibles values are "A", "B" and "M", and I want to map is as an enum due to its internationalization. I've created my enum class, and I cre

  • How the client stub is generated from the wsdl file ?

    I want to know how the client stub is generated from the wsdl file ? how the client accesses the methods in the wsdl fie ? thanks alot .

  • Error Message Since Downloading New Theme

    I download a new theme for Halloween from the App World ever since then when I do a hard reset and log in using my password it gives me this error. " uncaughtexceptionnet.rim,device.api.system.controlled.access.exception ". Does anyone know what this

  • Blue Colour Cast in Photobooth/Inbuilt Isight

    When using my inbuilt Isight cam..i keep getting a really blue cast. I've even changed my desktop from the usual blue apple one to another which is orange..and STILL get the blue cast. I have my colors setting at millions. Any ideas people? Thanks!