Workflow does not stop after the first reject

Hi!
We just got a 30-day Microsoft 365 trial at work in which we also received a Share site! I've been playing around with it a lot, especially to help them build an approval process. I believe since this is just a trial, I do not get the globally reusable Approval
Workflow. So I tried creating a new workflow attached to a list I created.
In this process, when the list is submitted, it needs to be approved by 2 people sequentially - John Doe & then Billy Bob.
When I create a new workflow, I click on actions and select "Start Approval Process". After doing that, it populates Step 1 with the following line - Start Approval process on Current Item with these users. I clicked on "these users" link and added the approvers
in sequences - John Doe, then Billy Bob.
I saved the workflow, checked for any errors and published the workflow. While testing with this workflow, I realized that when John Doe rejects the process, the task is still assigned to Billy Bob when it is actually suppose to stop.
How can I stop this workflow right after John Doe rejects the process?
Any help will be appreciated!

Hi whocareswhoiam,
Please post your question to Office 365 forums for quick reply. Below is the link.
http://community.office365.com/en-us/f/default.aspx
Thanks for your understanding.
Best regards,
Emir

Similar Messages

  • Capture Now does not stop after the limit is exceeded........

    Hi,
    I'm using FCP HD 4.5 on a DP500 G4, OS 10.3.9. I'm doing "capture Now" to get some VHS video into my machine. FCP will not stop the capture no matter how I set the time limit. This used to work, so what did I do??
    Quite frustrating.
    I've told FCP that I'm using a "non-controllable device" but the capture just keeps on going and going and going..........
    Help......
    Pete D.
    dual 500 G4 Mac OS X (10.3.9)

    When I tell it to stop it responds and stops just fine..... if it's been going for 10 minutes I have a 10 minute long file - even if the limit was 3 minutes......
    What happens when you tell it to stop rather than
    relying on the time limit?
    x
    Do your part in supporting your fellow users. If a
    response has been Helpful to you or
    Solved your question, please mark it as such
    as an aid to other lost souls on the forum.
    Also, don't forget to mark the thread Answered
    when you get enough information to close the thread.

  • HT203167 My iTunes Match does not work, it stops after the first step and won't do anything else!!!

    Hello, I purchased iTunes Match for my new iPhone five and it is intended to move the music from my computer to my other computer, but it stopped working on my MacBook Pro, it stopped after the first step. So, my question is, can iTunes Match work if the iTunes in question has other accounts attached to it, of not, can I get a refund on a service that does not work?

    I am having a similar issue with iTunes Match. It keeps hanging up on the same number of files (11035 of 15455) during STEP 2. I've tried signing out, re-opening iTunes, re-booting, etc. Still comesup stuck for hours. What I also don't understand is why the "iCloud Status" option in "View/View Options" disappears intermittently. It was there when I first booted up this morning and I reviewed all my music files to see if there were any "errors" and there werne't any. But after Match gets stuck on the same file niumber (11035) I 've signed out and re-booted and now the "iCloud Status" check box is missing from "View Options" (only the "iCloud Download" option remains present all the time. Please help. (I've also checked to make sure all the music files are within the suggested bit rate parameters and file type - This is also a brand new iMac out of the box). Running out of troubleshooting ideas and beginning to think this service just doesn't work well.

  • My MacMini does not stop after giving the order ''switch off''.What can I do?

    My MacMini does not stop after giving the order ''switch off''.
    It stops only, after pushing the button ''on/off'' for some seconds.
    What can I do?
    frahsun

    boot the Mac into safe mode, repair permissions while in it, then reboot normally.
    if that doesn't help, try resetting the System Management Controller (SMC).

  • Hi everybody, adobe muse does not start at the first attempt after installation. know the reason and possible solution? (on iMac 27 retina - latest edition)

    Hi everybody, adobe muse does not start at the first attempt after installation. know the reason and possible solution? (on iMac 27 retina - latest edition)

    Hi
    Are you still experiencing the issue or is it fixed now?

  • Render engine does not stop after reaching 100%

    It looks like to me that the render engine does not stop after reaching 100%. It does not affect the rendered file which is fine and complete
    -the Pause and Stop buttons are displayed but have no effect on pausing or stoping the render
    -when I want to quit SG, it locks up and have to Force Quit to get out of it.
    I really like the program though and hope you are going to fine tune the UI and make it look like After Effect and Premiere.
    I would encourage you to instaure round tripping between these two apps and SG.
    It would be nice to have curves as well.
    Thanks guys
    Brice

    Could you open the defaultTrace.X.trc files and check for the errors?
    Good from my point of view is to make a search if those files for some stack traces with the string ".dsr."
    Regards,
    Aleksandar

  • Trackpad of MacBook Pro mid 2009 does not respond to the first click/tap

    Have the following problem and wasn't able to find any sollution here somewhere
    if I click on a link or choose a checkbox or do anything by clicking it does not work with the first click/tap and I have all settings right.
    a PRAM reset had no effect on that problem.
    so I still have to click/tap several times to access a menu, a safari-tab, or anything else…

    thank you.
    still I am not sure if it really solved my problem, but it looks very good.
    was a bit irritated in the beginning, because I got no feadback if I had done the SMC reset right.
    If the problem will be back too soon, I will continue this discussion.
    THX

  • Why Netflix does not open after the new 7.0 update?

    WHY  Netflix does not open after the new update 7.9?

    Vincent149 wrote:
    I went to At&t yesterday, they said you have to call Apple support! Which im gong to try today since no one on here has posted anything back! Im frustrated! Maybe its there way of selling new phone!!!!
    These are user to user forums.  You are not addressing Apple by posting here.  If some other person has a solutoin for you, then they will post it.

  • HT4914 If I do not resubscribe after the first year with itunes match will any songs that have been upgraded in quality lose this upgrade or will it remain?

    If I do not resubscribe after the first year with itunes match will any songs that have been upgraded in quality lose this upgrade or will it remain?

    Dottie,
    If you want to upgrade the quality of a song in your library, you have to delete the library copy and download the matched copy.
    Once it is downloaded, it will stay in your library even you don't renew Match.

  • With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. iPad Synchronization is fine. Any ideas to solve it?

    With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. Even canceling takes forever.
    iPad2 sync is fine.
    Any ideas to solve it?

    This sounds like a problem you should take up with Apple Customer Support.
    The other users like yourself here are not going to be able to help you with this problem.
    Allan

  • My new iPod plays the music over and over again. It does not stop and the volume buttons have no effect. What can I do? The RESTRICTIONS  require a a passcode and I don't have one. Any suggestions?

    My new iPod plays the music over and over again. It does not stop and the volume buttons have no effect. What can I do? The RESTRICTIONS  require a a passcode and I don't have one. Any suggestions?

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup.
    In order to restore with the unknown Restrictions passcode you will likely have to place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Last,
    - Restore to factory settings/new iOS device.      

  • Subvi does not stop from the mainVi immediately when the stop button pressed in the mainVi

    Hi guys,
    I have a mainVi which has a subVi inside. I want to have a kind of emeregency stop button in my mainVi.
    when I pressed the button, the program does not stop instantly. it does one loop and then stops.
    please help me to solve this problem.
    Attached you can find the Main and SubVI
    Attachments:
    Sample2 MainVI.vi ‏18 KB
    Move_MINI Editted SubVI.vi ‏13 KB

    This is basic dataflow. Any code is available to run as soon as data is present on all its inputs. No data is present at its outputs until all the code inside has completed.
    What this means in your case is that the stop button will likely be read almost instantly when the while loop starts an iteration. It will not be read again until the start of the next iteration. This is why it will usually take an extra iteration to stop. You can either force it to read the stop button after the other code inside the loop completes or use a Producer/Consumer (events) architecture where the stop button will be read in a parallel loop containing an event structure.
    It also means that the Move_MINI subVI has no means of responding to any external events (such as the stop button being pressed) after it has started running. All the other subVIs are missing so it is hard to tell what is going on. From the control labels and VI names I suspect that this may be some kind of motion control system. If so it probably takes 100s of milliseconds to seconds or longer to complete a move. To allow an external event to modify the behavior of such a VI, you need a means of communication between the event (stop button) and the VI. A notifier may be an appropriate choice. The VI also needs to be configured in such a manner that it never goes more than about 100 ms without an opportunity to stop. Without knowing more about the subVIs, I cannot say how this might work.
    Lynn

  • TS3274 iPad does not start after the latest software update

    After downloading the latest software update on 25 April 2014, my iPad does not start. The reset mechanism does not have any effect. I would be thankful for advice.

    If the reset doesn't work, force iPad into recovery mode.
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • PROMPT WITH DEFAULT VALUES DOES NOT DISPLAY VALUES THE FIRST TIME

    Hi,
    With one of our scorecard reports, when you select a division, the leader role/leader prompt picklist values do not get populated the first time. Because this is only happening in reports we have written in house, we do not see this happening to the reports that are installed as default.
    Is there any workaround known for this error.
    Thanks and Regards

    Hey can somebody please let me know how to go about this isssue ..
    Thanks

  • ITunes 10.6.3.25 does not stop being the default audio player

    I have tried to disable the setting for iTunes from being the default audio player but, it does not work.
    After unchecking the box under:  Edit -> Preferences -> Advanced, clicked OK, closed iTunes and reopened it, the check box for this feature remains checked!
    The older version of iTunes version 10 did work until I upgraded to this version (10.6.3.25).
    I hope someone fixes or has a work around for this soon...It's really an inconvenience!
    Cary

    Hey thanks for replying.
    Here's what I did:
    First I tried the Winsock reset in the Command prompt. Nothing changed.
    Next, I tried the instructions on http://http://support.apple.com/kb/TS4123. The only other program that came up on the 'Winsock Providers' tab on the program was 2 Windows Live applications, which I can do without. So I deleted all Windows Live Applications.
    I did the Winsock reset in the Command Prompt again and rebooted my comp.
    Unfortunately, nothing has changed. iTunes keeps freezing at various stages of the sync, then shows the candy cane-striped bar with either the words 'Finishing sync' or 'Cancelling sync', before showing the Apple logo.
    Sometimes, iTunes gets to the syncing stage - "Copying # of ####" - where it will trudge through the first, second and third tracks before flashing "Copying 4 of ####" for a split second and I catch "Cancelling sync" briefly before the Apple logo appears.
    Again, I've repeated the steps I mentioned in my previous post. Does ANYONE know when the new version of iTunes is set to be released?! This one is driving me INSANE, to say the least!!

Maybe you are looking for