Workflow error in ChaRM using Group Approval

Hi,
I am using the Group Approval in ChaRM's requests for change transactions, as explained in detail in Michael Vollmer's blogpostNew ChaRM Feature with SP 10: Enhanced Approval Procedure Functions
I am also using the workflow crm_rfc_aprv (WS17100016), which sends out workflow tasks during the approval procedure.
Since I have assigned organizational units to my approval procedure, I always receive an e-mail from the Workflow User with title "Workflow 12345 set to status ERROR" for every ticket.
This is because somewhere in the code behind the workflow, a user is searched based on the business partner in the approval step. But an Organizational Unit is never linked to a user, you cannot assign the BP Role "employee" to an organizational unit.
It would be nice if the workflow could send workflow tasks to all the users assigned in the organizational model to the organizational unit. But currently, I am most concerned with getting rid of the workflow error e-mails. I really don't want to get an e-mail for each and every ticket.
Does anyone know if there is a way to solve this? Maybe some way to link an organizational unit to a (dummy) user anyway?

Hi Karthik,
Yes, my organizational model is maintained.
There are three BP's + Users assigned to the organizational unit.
The SP10 Enhanced Approval Procedure completely works, those three users are able to set the approval for the "Center of Competence" organizational unit to "approved" in the RfC ticket.
However, the workflow behind it never goes looking in the organizational model. It just sees "business partner 632", and checks only the data of BP 632, and doesn't find a user on it. So the workflow goes into error, and sends a mail about it to me...
For approval step 1 everything goes as normal, there is a specific person assigned to the step, the workflow finds a user on the person's business partner, and sends a workflow task / mail to that user.
Below are screenshots of tx PPOMA_CRM, the approval block in the RfC ticket, and the correct and error mail as seen in the tx SOST list.
Kind regards,
Joyca

Similar Messages

  • Nesting error when re-using groups

    JDev 11.1.1.4, JHS 11.1.1.3.35
    I have two related objects, ObjectA and ObjectB. In my app I need a primary form for ObjectA, with ObjectB on a detail group, plus a primary form for ObjectB with ObjectA as a detail group. I create re-usable groups, GroupA and GroupB. When I re-use GroupB as a detail group on GroupA, no problems, but then when I also re-use GroupA as a detail group for GroupB I get an error:
    Nested BindingContainer of this type [GroupBPageDef] is already included in this parent BindingContainer:data.app_UIShellPageDef.mainRegion.[GroupAPageDef]_WEB_INF_adfc_config_[GroupA]_xml_[GroupA]TaskFlow.[GroupB]TaskFlowBinding.[GroupBPageDef]_WEB_INF_adfc_config_[GroupB]_xml_[GroupB]TaskFlow.[GroupA]TaskFlowBinding
    Am I setting it up wrong? Or is it just not possible to re-use in both directions like that?

    I hit the same error last week in JDeveloper 11.1.2 in an app without JHeadstart. This seems to be a limitation of ADF, not related to JHeadstart.
    Please raise this issue on the JDeveloper forum, or even better with Customer support, with a simple testcase, because it limits the reuse options for taskflows.
    Steven Davelaar,
    Jheadstart team.

  • Workflow issue : N step Item level approval for SC

    Hello Friends,
    We are working on SRM 4.0 , classic scenario , SP11.
    Here we are facing a typical issue in workflow. We are using Nstep approval for SC.
    In the standard task TS14508044, the work item text is "Approval of SC ".The shopping cart value is being populated by container element &APPOBJ.OBJECTTOAPPROVE.TOTALVALUESTRING&
    This same container element is used to populate the shopping cart value in the task description. However what we observe is that in the workflow log, the container element APPOBJ is initial.
    How is the total value of the shopping cart populated then?
    Also, the value of the shopping cart in the work item text and the work item description is in different currency format.
    The shoppng cart value in the work item text is in the format 12,34,567.89 whereas that in the description is in the format
    12.934.567,8
    Appreciate your inputs on this.

    Thanks Masa,
    For your valuable suggestion. Now after changing the WF-BATCH settings there is consistency in the currency format.
    Now the question is how we can change into the currency format of the user ?
    The user format is 1,234,567. 89 but still work item text and
    description is in 1.234.567, 89 format.
    Thank you

  • XSLT List View Web Part Error when Using Group By

    I have a Tasks List created a tasks list in SharePoint.  The Tasks (normal OOTB template) list works fine in the normal view, however, I have created an XSLT ListView Web Part that points to this tasks list.  When I set the web part to display
    a view with a "Group By" rule, it returns an error:
    "Attempted to use an object that has ceased to exist. (Exception from HRESULT:
    0x80030102 (STG_E_REVERTED))
    The list has just over 1000 items and the threshold is set to 5000, I have tried indexing the column that I am "grouping by" just in case and that has not worked.  
    Has anyone experienced this issue before?  If so, what steps can be done to display the XSLT List View Web Part properly?

    Thank you for the response.  I tried the above link and it didn't seem to solve the issue; in fact, when I clicked on Common Control Tasks there wasn't any Data View Tasks such Filter and Sort & Group.  
    Perhaps some more information would shed light on a solution. I created a list template including content of the task list in question. I  was able to display the new list in an XSLT List View Web part with grouping enabled.  However, I noticed that
    the "Related Content" column was completely empty (it was there, it just had no data in each row).  What is the source of this Related Content? I know it is a system column that appears when Workflows generate the item in the list but could it be the
    reason for the Web part being unable to display with groupings?

  • Error while using Group By on 2 Querys joined by union

    Hello Everyone
    I have a situation where in one report i cannot group the data and in another report when i group the data i am unable to view subject area.
    I Had a Complex Request from my client , i have to claculate a report based on 2 dimensions i.e i am calculating 2 measures from one dimension and other 3 measures from other dimension and then using UNION to join both the querys , for the same description the data is being displayed in 2 rows , then i i tried to combine both the querys from union and trying to select from those then i am getting the result and the problem is i am unable to access the subject area , its giving "Either you do not have permission to use the subject area within Answers, or the subject area does not exist." Error , i am unable to add prompts to these request
    I want the investor Grants Row to be displayed in one Column , I am already using Group by in one of the querys.
    Study                      Cost            Approved         Committed                 Earned          Paid Balance
    Investigator Grants 350,000.00 113,770.78 0.00 0.00 0.00
    Investigator Grants 350,000.00 113,770.78 42,403.13 19,905.90 22,497.23
    Labs 23,000.00 0.00 0.00 0.00 0.00
    Study Drug 47,000.00 0.00 0.00 0.00 0.00
    Other 0.00 0.00 0.00 0.00 0.00
    Here is my query
    SELECT "- Protocol"."Protocol #" saw_0, "- Protocol"."Working Title" saw_1, CURRENT_DATE saw_2, "- Administration"."Display Currency Code" saw_3, "- Protocol"."Managing Country" saw_4, "- Protocol".Country saw_5, "- Protocol"."Country OPS" saw_6, "- Protocol"."EU Country" saw_7, "- Protocol"."GCO Region" saw_8, "- Protocol"."GPB Region" saw_9, "- Administration"."Study Cost" saw_10, SUM (IfNull("- Budget and Payment Facts"."Protocol Cost Line Item Amount - Display CCY",0) BY "- Administration"."Study Cost" ) saw_11, SUM(IfNull("- Budget and Payment Facts"."Committed Amount - Display CCY",0) BY "- Administration"."Study Cost") saw_12, SUM(IfNull("- Budget and Payment Facts"."Actual Amount - Display CCY",0) BY "- Administration"."Study Cost") saw_13, SUM(IfNull("- Budget and Payment Facts"."Amount Paid (SP) - Display CCY",0) BY "- Administration"."Study Cost") saw_14, SUM(IfNull("- Budget and Payment Facts"."Actual Amount - Display CCY",0)-IfNull("- Budget and Payment Facts"."Amount Paid (SP) - Display CCY",0) BY "- Administration"."Study Cost") saw_15, CASE WHEN "- Administration"."Study Cost" = 'Other' THEN 1 END saw_16 FROM "SPECTRUM Reporting" WHERE ("- Administration"."Display Currency Code" = 'USD') AND ("- Protocol"."Protocol #" = 'P31248') UNION SELECT "- Protocol"."Protocol #" saw_0, "- Protocol"."Working Title" saw_1, CURRENT_DATE saw_2, "- Administration". "Display Currency Code" saw_3, "- Protocol"."Managing Country" saw_4, "- Protocol".Country saw_5, "- Protocol"."Country OPS" saw_6, "- Protocol"."EU Country" saw_7, "- Protocol"."GCO Region" saw_8, "- Protocol"."GPB Region" saw_9, "- Administration"."Study Cost" saw_10, IfNull("- Budget and Payment Facts"."Protocol Cost Line Item Amount - Display CCY",0) saw_11, IfNull("- Budget and Payment Facts"."Committed Amount - Display CCY",0) saw_12, 0.00 saw_13, 0.00 saw_14, 0.00 saw_15, CASE WHEN "- Administration"."Study Cost" = 'Other' THEN 1 END saw_16 FROM "SPECTRUM Reporting" WHERE ("- Protocol"."Protocol #" = 'P31248') AND ("- Administration". "Display Currency Code" = 'USD') ORDER BY saw_16 DESC
    Any help is appreciated ..!
    ~Srix

    Here is the query i used to group the data but i cannot access Answers with this query
    SELECT saw_0 saw_0, saw_1 saw_1, saw_2 saw_2, saw_3 saw_3, saw_4 saw_4, saw_5 saw_5, saw_6 saw_6, saw_7 saw_7, saw_8 saw_8, saw_9 saw_9, saw_10 saw_10, SUM(saw_11 BY saw_10) saw_11, SUM(saw_12 BY saw_10 ) saw_12, SUM(saw_13 BY saw_10) saw_13, SUM(saw_14 BY saw_10) saw_14, SUM(saw_15 BY saw_10) saw_15, saw_16 saw_16 FROM (SELECT "- Protocol"."Protocol #" saw_0, "- Protocol"."Working Title" saw_1, CURRENT_DATE saw_2, "- Administration"."Display Currency Code" saw_3, "- Protocol"."Managing Country" saw_4, "- Protocol".Country saw_5, "- Protocol"."Country OPS" saw_6, "- Protocol"."EU Country" saw_7, "- Protocol"."GCO Region" saw_8, "- Protocol"."GPB Region" saw_9, "- Administration"."Study Cost" saw_10, SUM (IfNull("- Budget and Payment Facts"."Protocol Cost Line Item Amount - Display CCY",0) BY "- Administration"."Study Cost" ) saw_11, SUM(IfNull("- Budget and Payment Facts"."Committed Amount - Display CCY",0) BY "- Administration"."Study Cost") saw_12, SUM(IfNull("- Budget and Payment Facts"."Actual Amount - Display CCY",0) BY "- Administration"."Study Cost") saw_13, SUM(IfNull("- Budget and Payment Facts"."Amount Paid (SP) - Display CCY",0) BY "- Administration"."Study Cost") saw_14, SUM(IfNull("- Budget and Payment Facts"."Actual Amount - Display CCY",0)-IfNull("- Budget and Payment Facts"."Amount Paid (SP) - Display CCY",0) BY "- Administration"."Study Cost") saw_15, CASE WHEN "- Administration"."Study Cost" = 'Other' THEN 1 END saw_16 FROM "SPECTRUM Reporting" WHERE ("- Administration"."Display Currency Code" = 'USD') AND ("- Protocol"."Protocol #" = 'P31248') AND ("- Payment"."Payment Number"="- Payment"."Related Payment Request Number")
    UNION SELECT "- Protocol"."Protocol #" saw_0, "- Protocol"."Working Title" saw_1, CURRENT_DATE saw_2, "- Administration". "Display Currency Code" saw_3, "- Protocol"."Managing Country" saw_4, "- Protocol".Country saw_5, "- Protocol"."Country OPS" saw_6, "- Protocol"."EU Country" saw_7, "- Protocol"."GCO Region" saw_8, "- Protocol"."GPB Region" saw_9, "- Administration"."Study Cost" saw_10, IfNull("- Budget and Payment Facts"."Protocol Cost Line Item Amount - Display CCY",0) saw_11, IfNull("- Budget and Payment Facts"."Committed Amount - Display CCY",0) saw_12, 0.00 saw_13, 0.00 saw_14, 0.00 saw_15, CASE WHEN "- Administration"."Study Cost" = 'Other' THEN 1 END saw_16 FROM "SPECTRUM Reporting" WHERE ("- Administration"."Display Currency Code" = 'USD') AND ("- Protocol"."Protocol #" = 'P31248')) T GROUP BY saw_0, saw_1, saw_2, saw_3, saw_4, saw_5, saw_6, saw_7, saw_8, saw_9, saw_10 , saw_11, saw_12, saw_13, saw_14, saw_15, saw_16 ORDER BY saw_0, saw_1, saw_2, saw_3, saw_4, saw_5, saw_6

  • Workflow Error Message: System Account - The Workflow could not set Content Approval Status

    This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
    When I start the work flow the following 3 error messages show up:
    Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
    Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
    Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
    Thank you for your kind guidance.

    Hi,
    For the first error: Did you set Content Approval in the workflow?  If so, see if you have it in the versioning settings of the list settings.
    For the second error: double check your recipient is set up as being valid.  Did you type in the email address or is it referring to a people picker field?  also, make sure that in the workflow for the email that you actually populated it in the
    To: field.
    for the third error: I suspect that either your farm is not configured for email.  Or, this error is a knock on from the second error.  If you get the second error rectified it may clear this error.  If not then double check the email settings
    for your farm.
    Johnathan Lightfoot

  • How to create a three state approval workflow in SharePoint 2013 using visual studio 2013

    Hi Everyone,
    i have a requirement like 3 state to approve. Here is the details:- when the item added into the list it will go for reviewer. Once the reviewer review the item, he will assign the task to concern person/department(Parallel process more than two persons).
    Once they will approve the request again it will come back to reviewer and he will assign the task to team member(parallel process). Once the team member accepted then workflow terminate.
    i want develop this workflow using visual studio 2013 only, not using designer.. 
    Thanks in Advance.....
    Mallesh

    Hello,
    you can find multiple sample on the web like those
    http://www.splessons.com/2013/12/create-state-machine-workflow-in-sharepoint-2013-using-visual-studio-2012/
    http://msdn.microsoft.com/en-us/library/ee231606.aspx
    I don't think that's very different using VS2013 or VS2012
    Best regards, Christopher.
    Blog |
    Mail
    Please remember to click "Mark As Answer" if a post solves your problem or
    "Vote As Helpful" if it was useful.
    Why mark as answer?

  • Error while creating resource group using non-globalzones.

    Dear all,
    Hi techs please guide me how to create failover resource group in nongloablzones.
    I'm getting error while creating resource group using non-globalzones.
    My setup:
    I have two node cluster running sun cluster 3.2 configured and running properly.
    node1: sun5
    nide2: sun8
    I have create non-globalzone "zone1" in node:sun5
    I have create non-globalzone "zone2" in node:sun8
    node:sun5# clrg create -n sun5:zone1,sun8:zone2 zonerg
    *(C160082) WARNING: one or more zones in the node list have never been fully booted in the cluster mode,verify that correct zone name was entered.*
    kindly guide me how to create Apache resource group using non-glabalzones, i'm new to sun cluster 3.2. please guide me step by step information.
    Thanks in advance,
    veera
    Edited by: veeraa on Dec 19, 2008 1:54 AM

    Hi Veera,
    Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
    zoneadm list -iv
    If zone1 or zone2 are not running then boot and configure them
    zoneadm -z <zone> boot
    zlogin -C <zone>
    After that you can continue to follow the step by step instructions at
    http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
    These may also help
    http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
    http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
    Regards
    Neil

  • Error while using group function

    Oracle forms6i
    Hai
    While i am compile my coding it compile successfully, but when i tried to executes i shows error in group function
    my coding is
    if (cnt<>0 ) then
    select BARCODE,INTIME,OUTTIME into today_bar,today_in,today_out from dail_att where BARCODE= :Barcode
    and ATTEND_DATE = :bardate;
    update dail_att set outtime = max(:bartime) where barcode= :barcode
    and ATTEND_DATE = :bardate;
    else
    if (cnt2<>0 ) then
    select INTIME,OUTTIME into yest_in,yest_out from dail_att where BARCODE= :Barcode
    and ATTEND_DATE = :bardate-1;
    if(yest_in is not null and yest_out is null) then
    update dail_att set outtime =max(:bartime) where barcode= :barcode
    and ATTEND_DATE = :bardate-1;
    else
    insert into dail_att(barcode,intime,attend_date)
    values(:barcode,min(:bartime),:bardate);
    end if;
    else
    if :bartime between 0100 and 0630 then
    insert into dail_att(barcode,intime,attend_date)
    values(:barcode,min(:bartime),:bardate-1);
    update dail_att set outtime = max(:bartime) where barcode= :barcode
    and ATTEND_DATE = :bardate-1;
    else
    insert into dail_att(barcode,intime,attend_date)
    values(:barcode,:min(bartime),:bardate);
    end if;     
    end if;
    end if;
    while i am trying to this groupfunction it throws error while i use having tell me how to use group function and where
    to use
    Regadrs
    Srikkanth.M

    Hai sir
    I had a table that contain fields
    EMPCODE NUMBER
    EMPNAME VARCHAR2(25)
    BARCODE VARCHAR2(25)
    INTIME VARCHAR2(25)
    OUTTIME VARCHAR2(25)
    INTRTIMEIN VARCHAR2(25)
    INTROUTTIME VARCHAR2(25)
    PERTIMEIN VARCHAR2(25);
    PERTIMEOUT VARCHAR2(25);
    ATTEND_DATE DATE ;
    Consider that a table with 6 fields ie timein,intrtimein,pertimein,pertimeout,intrtimeout,timeout
    I have generating a attendance table and a table contain 6 various times for an employees and we need to arrange it in order
    0815,0816,1230,1250,1645,1646
    If 0815 is the starting time then timein ie mintime
    0816 stored to be in intrtime
    then1250 then it stored in pertimein
    then 1230 then it stored in pertimeout
    then 1645 stored in intrtimeout
    then 1646 stored in timeout
    I tried with max and min function but its not working properly pls tell me some solutions
    Thanks & Regards
    Srikkanth.M

  • WorkFlow Error -Strategy RR_MANAGER did not determine any approver

    Dear ,my expert:
    I work in SRM7.0 .SRM extended classic scenario.I want to use the contract one-step approve workflow and active it .
    one-step approve :/SAPSRM/C_CT_600_001_SP04
      And I set the manager in the ORG. Plan
    After I releasing one contract ,I get one red message in the Processor "Strategy RR_MANAGER did not determine any approver  "
    So ,What is the problem ? Your reply will be useful to me !
      BestRegards!
      Alex!

    Hi,
      What happen when you run the FM 'RH_GET_LEADING_POSITION' IN se37 dirrectly.. check the OSS note 1363088 if your SP level is below 5..
    Saravanan

  • Three State Approval Workflow Error

    I have created one Task List. Add Three state approval workflow to it.
    When i created New Task. It started workflow. But after couple of minutes it throws error "Error Occured". How to find error.
    Please let me know. If you know any resolution for workflow error then also let me know.
    Thanks in advance.

    Hi,
    Please go to the task list settings page, click Assigned to column and check "No" for "Allow multiple selections", then check whether the issue still exists or not.
    Here are two threads for your reference:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9231b505-7e78-4e98-b6c0-02ad85b247c3/error-occured-three-state-workflow-multiple-selection?forum=sharepointcustomizationlegacy
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/5a9f37ea-40b4-494b-b4af-db15be9d91ff/error-occured-three-state-workflow?forum=sharepointgenerallegacy
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Budget Approval Workflow Error: FMBCS_WF_ROLE_BUDGET parameter: FMBCS

    Hi All,
    I am implementing BCS Standard workflow templates WS12300025/6 on ECC 6.0.  When I test the workflow, i get the following error:
    "Function module call up error: FMBCS_WF_ROLE_BUDGET parameter: FMBCS"
    What could be the cause of this?
    Please assist. 
    Thank you.
    Robeth

    Sudhir,
    I have tried simulating the rule alone but I get the error message "Test not Executed".
    I must admit I am new with Objects.   Which Object ID is not properly imported?  When I define binding automatically, the following workflow and rule objects are generated,
    Workflow          Rule
    &ACTIVITY&    &ACTIVITY&
    &BUS0050&    &BUS0050&
    &LEVEL&        &LEVEL&
    I have also tested the workflow without the rule using Tcode SWDD directly,  the task is started ok but work item in the agent's inbox has decision box showing only one alternative (Cancel and keep work item in inbox) instead of two.  In addition it does not show the attached pre-posted document.
    When I run Tcode FMBB directly to trigger the workflow, the workflow is not triggered even though type linkage for event PREPOSTEDDOCCREATED has been activated.
    I am puzzled by this.  Please give me step and step and if possible give me the objects.
    Thank yuo.
    Robeth

  • Error using group by expression

    hello friends,
    I use this query & used group by but oracle give error :
    ORA-00979: not a GROUP BY expression
    Select uu.ID,max(uu.module_name) as MainMenu,uu.NAME,decode(substr(param_str,4,1), 'P','ü','') as Allow,decode(substr(param_str,1,1), 'A','ü','') as Ins,decode(substr(param_str,2,1), 'E','ü','') as Edit,decode(substr(param_str,3,1), 'D','ü','') as Del from USER_MODULE uu,user1 where( user_name='SA'or user_name is null)and user1.srno=uu.srno and uu.ID=uu.ID group by uu.id,uu.name,MainMenu group by uu.id,uu.name

    Hi
    The 'param_str' in DECODE function either should be a bind variable for user input or should be a column of a table. If it is a table/view column then include it in the GROUP BY clause and the query should work.
    If you specify a GROUP BY clause in a statement, then the select list can
    contain only the following types of expressions:
    – GROUP BY expressions
    – Constants
    – Aggregate functions and the functions USER, UID, and SYSDATE
    – Expressions identical to those in the group_by_clause. If the group_by_
    clause is in a subquery, then the GROUP BY columns of the subquery must
    match the select list of the outer query. Any columns in the select list of the
    subquery that are not needed by the GROUP BY operation are ignored without
    error.
    – Expressions involving the preceding expressions that evaluate to the same
    value for all rows in a group
    In short, except for the columns in aggregate functions, all columns must be included in the GROUP BY clause.
    - Priya

  • AI Group Config error -10403 when using DAQPad-6070E

    I am using a DAQPad-6070E with attached device SCB-68.
    Yesterday, I was able to read in analog waveforms using the attached file. Today, without any changes made to the file, I get an error -10403 in AI Group Config.
    What could be causing this error since no changes were made in the file or in Measurement and Automation Explorer configuration?
    My system configuration is as follows:
    Windows XP
    Measurement and Automation Explorer v. 2.2.0.3010
    NI-DAQ v. 6.9.2f4
    LabVIEW v. 6.1
    Attachments:
    AIGroupConfigError.vi ‏256 KB

    I haven't been able to run your VI since I'm lacking one of the subVIs in your design, but taking a look I have a few suggestions. I noticed that the device and channels controls for AI Config are both hidden on the front panel. The default values for these controls should be checked to make sure that they agree with the device number in MAX. You could place a probe on all of the inputs to the AI Config VI and let us know what values are being sent.
    Also, try resetting the device driver through MAX, just in case another program did not release some resources that are needed by your VI.

  • Tcode to be used to approve a workflow item

    Hi Gurus,
    Which tcode can be used to approve a workflow item manually?
    br
    jack

    SWO1
    SELECT THE BUSINESS OBJECT
    IF IT IS SC
    BUS2121
    EXUCUTE
    INSTANCE
    GIVE SC NUMBER
    GO TO METHOD
    SET RELEASED
    EXECUTE
    SC APPROVED.
    THIS IS BACKEND METHOD .........FIRE FIGHTING NOT ALWAYS..

Maybe you are looking for