Workflow in FNM1 or FNM1S
Hello alls,
Does anyone know say what are the business object to the transaction FNM1 or FNM1S?
It started as a workflow in these transactions for release of payment before the document be counted? The document will count only if the approver release the document for payment.
Thanks
Luciano
Hi Luciano,
There are a couple of ways to find the business object for a tcode -- both discussed recently. Pls see these threads -
Re: Configuration settings for parked inv workflows - Z1 & F-04 Doc types
Bo Object for a tcode
Regards,
KKR
Similar Messages
-
Business Object for FNM1 or FNM1S
Hello alls,
Does anyone know say what are the business object to the transaction FNM1 or FNM1S?
It started as a workflow in these transactions for release of payment before the document be counted? The document will count only if the approver release the document for payment.
Thanks
LucianoHi Luciano,
There are a couple of ways to find the business object for a tcode -- both discussed recently. Pls see these threads -
Re: Configuration settings for parked inv workflows - Z1 & F-04 Doc types
Bo Object for a tcode
Regards,
KKR -
Assign house bank to Customer item - LOANS - FNM1
Hi Guys.
In Loans, when I use FNM1, is it possible to assign the "House bank" in the customer posting item?
There is payment details in Loans but this payment detail is only when I'm not using customers.
My doubt is when I'm using customer. Is it possible?
Regards.
LuccianoHi Prasad
Why house bank details are required while posting with customer account?
To issue the bill in F110. I know F110 has another engine to determine the house bank. But I would like to define according to the Loan contract.
Thank you for your answer.
Lucciano -
Hi Experts,
I want to do automatic posting for FNM1. can you tell me which BADI or user-exit to use.
to do automatic posting do i need to use BAPI_ACC_DOCUMENT_POST if yes how ?
RegardHi Experts,
if you cannot understand my question let me knwo 'll explain in detail.
Thanks,
Sunita -
URGENT: "NO APCC block received" after Tcode FNM1
Hello,
today we had this big problem:
after the
T-code: FNM1 - Post Planned Records in Treasury module
in sm21
11:25:48 DIA 005 R36 No APPC block received
11:25:48 SPO 012 R36 No APPC block received
11:25:49 DIA 000 R36 No APPC block received
11:25:49 DIA 001 R36 No APPC block received
11:25:49 DIA 002 R36 No APPC block received
11:25:49 DIA 003 R36 No APPC block received
11:25:49 DIA 004 R36 No APPC block received
11:25:50 DIA 005 R36 No APPC block received
and all process was blocked.
I saw the notes
80385 - All APPC blocks filled, server hangs
3223 - Number of WP and APPC blocks
594257 - RFICRC20 terminates with system log message Q0P and R36
but i didnt understand the problem.
Can somone help me please?read oss note 3223 - 'Number of WP and APPC blocks'
Try to increase the value of parameter rdisp/wp_ca_blk_no or rdisp/appc_ca_blk_no, at least 300 to both of them.
This was a bottleneck.
If necessary, increase the dia process (up to 6). -
Error when trying to post interest using FNM1 in Loan Module
Hi,
I am getting error "50 E INTEREST EXP or ZBA CONTRA ACCT cannot be replaced' when positng the interest payment for loan in loan module. The system has posted a planned record and i see it in the cash flow however when posting the planned record it is giving the above error.
Your inputs are greatly appreciated.check loan posting scheme here:
Spro - SAP Banking - Loans management - Functions - Accounting - Define account determination
Check posting category against debit/credit posting codes and linked GL accounts for your account symbols or post here what you have defined and I couldl see what the problem is -
Error when posting Planned Records using FNM1 in Loan Module!!
Hi,
I am getting error "50 E INTEREST EXP or ZBA CONTRA ACCT cannot be replaced' when positng the interest payment for loan in loan module. The system has posted a planned record and i see it in the cash flow however when posting the planned record it is giving the above error.
Your inputs are greatly appreciated.check loan posting scheme here:
Spro - SAP Banking - Loans management - Functions - Accounting - Define account determination
Check posting category against debit/credit posting codes and linked GL accounts for your account symbols or post here what you have defined and I couldl see what the problem is -
Error while deploying a workflow in OWB
Hi,
I am getting the below error while deploying a workflow in Control Center.
ORA-29532: Java call terminated by uncaught Java exception: java.sql.SQLException: The file /u01/app/oracle/product/11.2.0.2/dbhome_1/owb/bin/admin/rtrepos.properties cannot be accessed or has not been properly created on the server XXXXXX. If the file does not exist or if the database owner (normally user 'oracle') does not have the required file permissions or if the file has not been properly created then the file can be recreated by running the SQL*Plus script /u01/app/oracle/product/11.2.0.2/dbhome_1/owb/rtp/sql/reset_repository.sql (in a RAC environment the file must be manually copied to each server which is used for OWB). Otherwise if using a 10.2 database instance, then please run the SQL*Plus script /u01/app/oracle/product/11.2.0.2/dbhome_1/owb/UnifiedRepos/reset_owbcc_home.sql.
Did any one faced this issue before?
Kindly let me know the steps to resolve the issue.
Thanks.Hi Vidyanand,
Did you create the runtime access user using the runtime assistant? Did you select the correct runtime repository (if you have more) to associate your runtime access user with?
Note that there are 4 database roles being created when you create a runtime repository owner:
- OWB_A_<runtime repository owner>
- OWB_D_<runtime repository owner>
- OWB_R_<runtime repository owner>
- OWB_U_<runtime repository owner>
If you would grant those roles to a user, then that user becomes an access user for the user with username <runtime repository owner>.
Note that you can also use the runtime repository credentials to connect to the runtime repository for deployment purposes, but you may not want that because of security concerns.
Thanks,
Mark. -
I am wondering whether I can configure the following:
- Can I have multiple views? Example, view documents by Author, Project, Category? Can I customize document
views?
- Can I control access rights on a single document?
- Can I monitor or extract a report on how often a document is accessed?
In addition, I have the following problems with OCS Workflow:
- The Workflow has no default email notification. Documentations indicated that Email Notification has to be configured to work with SendMail. Can Email notification be configured with OCS Mail instead?
It does not make sense to use SendMail instead of OCS Mail.
- Document can be viewed by Workspace members once it is uploaded. What is the purpose of workflow then?
- Document has to be manually submitted for review to initiate a Workflow process. Can this be performed automatically?
- WorkFlow approver is defined by the user. It should have predefined approvers.
- In Workflow notification, Notification Detail provides the URL but does not have a URL link back to the document. In this case, the review process is manual because the approver does not have an easy
way to preview the document.
Are my comments correct? Are there any workarounds?Roger,
1) The default SPINCOUNT value is 0 (no spinning) for all platforms that are supported today. (At one time we had a default value of 5000 for Sequent hardware, but it has been many years since we supported that platform.) The SPINCOUNT value that will work best for any application depends on many factors, including the number of CPUs on the machine, the hardware platform, and the indvidual application. SPINCOUNT will only be useful when the machine has more than one CPU.
2) /Q logs Q_CAT:1447 after 50 unsuccessful attempts to obtain the semaphore when the semaphore has never been released and reobtained by a different process or the same process during that period. The Access Control List code uses the same rule for logging LIBTUX_CAT:1511. If TMSPINCOUNT is set, then the number of unsuccessful attempts to obtain the semaphore is incremented by 1 only after TMSPINCOUNT spins have been done.
Code for the BB semaphore and the semaphore used by /Domain follows a different rule. This code will log LIBTUX_CAT:5005 or LIBGW_CAT:5010 if a process has to wait for the semaphore for 10 seconds and the semaphore has never been released by the original owner during this time period.
3) TMSPINCOUNT is used for the BB semapahore, AOM semaphore, ACL semaphore, /Domain semaphore, and /Q semaphore. Locking the GTT uses the same BB semaphore that used to lock other tables in the BB.
Regards,
Ed -
How can I display a SP 2010 out of the box workflow's task assignees via powershell?
There are days where one of the 250+ workflows at the site has attempted to send email to someone no longer at the company.
I would like to find a way to go through the farm and display all the list URLs that have workflows, and the mail addresses associated to the workflows.
This way I can track down the workflows that need to be updated to remove the missing users.
I have started a bit of script to do this. In my script, I just had a site collection - I figured that if I can get that to work, then surely wrapping another loop for the rest of the farm won't be bad.
However, for some reason, I am not seeing the output that I expected to show the mail addresses.
I am hoping a different set of eyes might see what I am missing. It was my understanding that the AssociationData property was XML that contained information about the assignees for tasks, the carbon copy list, etc.
Maybe I misunderstood something that I read?
$outLoc = "d:\temp\wfdata.txt"
$web = Get-SPWeb -Identity "http://myfarm/sites/it/"
foreach ($list in $web.Lists)
$associationColl=$list.WorkflowAssociations
foreach ($association in $associationColl)
$association.AssociationData | Out-File $outLoc
$web.Dispose()
I want to thank you for the helpful tips that so often appear on this list. They help me when I am reading over old threads to figure out what to do. I am hoping that tips on this thread will likewise be helpful.Hi,
With
SPWorkflowAssociation.AssociationData property, we can get the assignees’ information. Your script can
be able to retrieve a XML format data which contains the user name we need:
So the next step would be getting the user name by parsing the XML data we got.
The two links below will show how to parse XML with PowerShell:
http://stackoverflow.com/questions/18032147/parsing-xml-using-powershell
http://blogs.technet.com/b/heyscriptingguy/archive/2012/03/26/use-powershell-to-parse-an-xml-file-and-sort-the-data.aspx
With the user name, we can get the
Email property of an user with the scripts as the link below provided:
http://davidlozzi.com/2012/03/07/using-powershell-to-access-sharepoint-sites/
Best regards
Patrick Liang
TechNet Community Support -
Creating a Role view in a workflow
I'm trying to create a role view in my workflow with the following code but it gives me an error: com.waveset.util.InternalError: Unable to locate ViewHandler for 'role'.
<Action application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='createView'/>
<Argument name='type' value='Role'/>
<Return from='view' to='view'/>
</Action>Has anyone created a role from a workflow, java or SPML?nvm figured it out.
<Action id='0' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='createView'/>
<Argument name='type' value='Role'/>
<Argument name='viewId' value='Role'/>
<Argument name='Form' value='Empty Form'/>
<Argument name='authorized' value='true'/>
<Return from='view' to='role'/>
</Action> -
Dear all,
sorry for opening another thread on this.
I think I have a performance issue with workflows attached to document sets in SharePoint. And I say “I think” because people keep telling me that this is the way it just is.
The user creates a new document set, which triggers a workflow in which the user has to confirm/review/approve a series of tasks. The time it takes from clicking the OK button on those task form to the workflow status moving to the next step is about 4 seconds.
And visiting that status page within those 4 seconds brings up the infamous “Note: Due to heavy load, the latest workflow operation has been queued. It will attempt to resume at a later time.” message.
Hitting Refresh in the browser after those 4 seconds will make the new workflow status appear and the red text go away.
Is that normal? Is that the performance that everyone else is seeing as well?
I struggle to see why simply moving a workflow from one task to another should take that on a machine that isn’t doing anything else at the time.
(1)
I have a standalone (non-clustered) SharePoint box, 4 CPUs, 8 GB of memory, more than half of that available, acting as application server and wfe; only the database is on different box.
(2)
The CPU only goes up to 18 or 19%, so CPU does not seem to be the bottleneck. Half the RAM is also still free.
(3)
The workflow is designed with Nintex, and has about 9 flexi and review tasks – the last 2 of them in a loop iterating over typically 3 or 4 items.
(4)
Looking at the logs it looks like the processing in Nintex only takes about 1 second – I don’t know where the other 3 seconds are going.
(5)
There is nothing obvious in the logs.
(6)
We’ve looked at all the “theoretical” improvements around throttling and batch sizes etc. – none of them appeared make any difference. And the workflow is so small that it looks like my tasks gets executed straight away. The problem appears
to be that the execution takes too long(?) and therefore has not finished by the time the page get redrawn.
(7)
I am running perfmon and I can e.g. see one(!) workflow being loaded into memory – as expected as I am the only user.
(8)
I am seeing a total of 3(?) SQL queries being executed(?). I get the Bytes Sent/sec spiking at 25K, and Bytes received at 18K. But is this good or bad or a bottleneck?
Where do I take it from here?
I have been told that “[…] most customers have no issue with this as they are used to the way SP operates and it can be slow at times.” Is it really that bad?
If it is worth watching more performance counters then I’d need to know what to compare them to.
Is there something else I am missing?
Thanks
MartinHi,
Before considering an additional hardware try to change following configurations for workflow:
Increase Throttle Size
Increase Batch Size
Time Out
Workflow Timer Interval
AutoCleanUpDays
Increase Throttle Size
The Workflow throttle setting controls how many Workflows can be processing at any one time on the entire server farm. By increasing the throttle it will allow the number of Workflows execution or can be initiated at a time.
Use below PowerShell command to get the current Throttle Size:
Get-SPFarmConfig | Select WorkflowPostponeThreshold
Use below PowerShell command to set new Throttle Size:
Set-SPFarmConfig -WorkflowPostponeThreshold 100
Increase Batch Size
This is the size that determines number of events processed for a single Workflow instance. Default value is 100, but it can be range from 1 to any number.
Use below PowerShell command to get the current Batch Size:
Get-SPFarmConfig | Select WorkflowBatchSize
Use below PowerShell command to set new Batch Size:
Set-SPFarmConfig -WorkflowBatchSize 200
Time Out
This decides the time out of the Workflow event. The default value is 5 and can be any integer. The time is in minute.
Use below STSADM command to get the current Time Out value:
stsadm -o getproperty -pn workflow-eventdelivery-timeout
Use below STSADM command to get the current Time Out value:
stsadm -o setproperty -pn workflow-eventdelivery-timeout -pv “15″
Workflow Timer Interval
This setting is applicable at Web Application level and not the farm level. The workflow timer interval specifies how often the workflow SPTimer job fires to process pending workflow tasks. This interval also represents the granularity of delay timers within
your workflow. If a timer is set to delay for one minute, but the interval timer fires only every five minutes, the workflow delays for five minutes, not one minute.
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o getproperty -pn job-workflow -url <Web Application Url>
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o setproperty -pn job-workflow -pv “Every 10 minutes between 0 and 30″ -url <Web Application Url>
Here is the url for reference :
http://praveenkasireddy.wordpress.com/2013/06/14/workflow-due-to-heavy-load-the-latest-workflow-operation-has-been-queued-it-will-attempt-to-resume-at-a-later-time/ -
I have SharePoint 2010 Enterprise running SP1. Configuration is one SharePoint server in the farm and a SQL 2008 R2 database for the backend. Our user environment is 80 users with very little load on the SharePoint server. I have the workflow timer
set to 1 minute.
I have a SPD workflow that starts manually on a form library. Whenever I publish a new version of the workflow, the next time I start the workflow it takes the full minute to finish. If I click on the workflow status before it finishes, I see the message
"Due to heavy load, the latest workflow operation has been queued. It will
attempt to resume at a later time.". After the minute completes the workflow finishes.
Here's the weird thing, the next time I start the workflow, it runs in a couple of seconds - almost instantly. I've tried up to 15 times after the inital publishing and everything seems to work fine on initiation.
Well, that would be fine for me, however, I intermintantly get this heavy load message during task processes that are running inside the workflow. It's probably less than 5% of the time. It's really frustrating though so I appreciate some help. I'm look
online and haven't found anything that describes my situation.
Thank you in advance!Hi,
Before considering an additional hardware try to change following configurations for workflow:
Increase Throttle Size
Increase Batch Size
Time Out
Workflow Timer Interval
AutoCleanUpDays
Increase Throttle Size
The Workflow throttle setting controls how many Workflows can be processing at any one time on the entire server farm. By increasing the throttle it will allow the number of Workflows execution or can be initiated at a time.
Use below PowerShell command to get the current Throttle Size:
Get-SPFarmConfig |
Select WorkflowPostponeThreshold
Use below PowerShell command to set new Throttle Size:
Set-SPFarmConfig -WorkflowPostponeThreshold
100
Increase Batch Size
This is the size that determines number of events processed for a single Workflow instance. Default value is 100, but it can be range from 1 to any number.
Use below PowerShell command to get the current Batch Size:
Get-SPFarmConfig |
Select WorkflowBatchSize
Use below PowerShell command to set new Batch Size:
Set-SPFarmConfig -WorkflowBatchSize
200
Time Out
This decides the time out of the Workflow event. The default value is 5 and can be any integer. The time is in minute.
Use below STSADM command to get the current Time Out value:
stsadm -o getproperty -pn workflow-eventdelivery-timeout
Use below STSADM command to get the current Time Out value:
stsadm -o setproperty -pn workflow-eventdelivery-timeout -pv “15″
Workflow Timer Interval
This setting is applicable at Web Application level and not the farm level. The workflow timer interval specifies how often the workflow SPTimer job fires to process pending workflow tasks. This interval also represents the granularity of delay timers within
your workflow. If a timer is set to delay for one minute, but the interval timer fires only every five minutes, the workflow delays for five minutes, not one minute.
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o getproperty -pn job-workflow -url <Web Application Url>
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o setproperty -pn job-workflow -pv “Every 10 minutes between 0 and 30″ -url <Web Application Url>
Here is the url for reference :
http://praveenkasireddy.wordpress.com/2013/06/14/workflow-due-to-heavy-load-the-latest-workflow-operation-has-been-queued-it-will-attempt-to-resume-at-a-later-time/ -
FM to read the different steps in workflow and the status at each step
Hi All,
Is there any FM in SAP which gives the detail roadmap of the steps taken in a workflow and the diffrent status or decision at each step.
I am looking for something like what you see when you click on the "STARTED WORKFLOW" in the business workplace outbox.
Which shows up the "steps in the process so far " and the decision and the agents for each of them.
Thanks,
Charan.Hi,
You can get the status according to the task. please check with FM "SAP_WAPI_GET_WI_DELTA".
Regards
SM Nizamudeen -
Getting Error While Attaching Concurrent Program Output PDF file for POAPPRV Workflow
Hi All,
I am getting the below error when I am trying to attach concurrent program output to the PO Approval Notification.
An Error occurred in the following Workflow.
Item Type = POAPPRV
Item Key = 1040589-528378
User Key =945871
Error Name = WF_ERROR
Error Message = [WF_ERROR] ERROR_MESSAGE=3835: Error '-20002 - ORA-20002: [WFMLR_DOCUMENT_ERROR]' encountered during execution of Generate function 'WF_XML.Generate' for event 'oracle.apps.wf.notification.send'. ERROR_STACK=
Wf_Notification.GetAttrblob(3604701, ZZ_PREVIOUS_PO_COMPARE, text/html)
WF_XML.GetAttachment(3604701, text/html)
WF_XML.GetAttachments(3604701, http://oraerp.am.corp.xxxx.com:8099/pls/DEV, 11283)
WF_XML.GenerateDoc(oracle.apps.wf.notification.send, 3604701)
WF_XML.Generate(oracle.apps.wf.notification.send, 3604701)
WF_XML.Generate(oracle.apps.wf.notification.send, 3604701)
Wf_Event.setMessage(oracle.apps.wf.notification.send, 3604701, WF_XML.Generate)
Wf_Event.dispatch_internal()
Error Stack =
Activity ID = 190844
Activity Label = AL_NOTIFY_APPROVER_PROCESS:ZZ_PO_PO_APPROVE_ATTCH
Result Code = #MAIL
Notification ID = 3604701
There are several threads for this error however I cannot find any specific solution to the problem.
Please find the code below -
wf_engine.setitemattrdocument(itemtype=>itemtype,
itemkey=> itemkey,
aname=>'ZZ_PREVIOUS_PO_COMPARE',
documentid =>'PLSQLBLOB:zz_po_reqapproval_init1.xx_notif_attachments/' || to_char(l_request_id_prev_po)||':'||to_char(l_document_num));
-- here l_request_id_q_and_s is the request id of the program and l_document_num is the PO document number
PROCEDURE xx_notif_attachments(p_request_id IN VARCHAR2,
p_document_num IN VARCHAR2,
p_document IN OUT BLOB,
p_document_type IN OUT VARCHAR2) IS
v_lob_id NUMBER;
v_document_num VARCHAR2(15);
v_document_prefix VARCHAR2(100);
v_file_name VARCHAR2(500);
v_file_on_os BFILE;
v_temp_lob BLOB;
v_dest_offset NUMBER := 1;
v_src_offset NUMBER := 1;
v_out_file_name VARCHAR2(2000);
v_conc_prog_name VARCHAR2(500);
v_conc_req_id NUMBER;
CURSOR get_output_file(p_concurrent_request_id NUMBER) IS
SELECT cr.outfile_name, cp.concurrent_program_name
FROM fnd_concurrent_requests cr, fnd_concurrent_programs_vl cp
WHERE request_id = p_concurrent_request_id
AND cp.concurrent_program_id = cr.concurrent_program_id;
BEGIN
-- set_debug_context('xx_notif_attach_procedure');
v_conc_req_id := to_number(substr(p_request_id,
1,
instr(p_request_id, ':') - 1));
v_document_num := substr(p_request_id,
instr(p_request_id, ':') + 1,
length(p_request_id) - 2);
OPEN get_output_file(v_conc_req_id);
FETCH get_output_file
INTO v_out_file_name, v_conc_prog_name;
CLOSE get_output_file;
v_out_file_name := substr(v_out_file_name,
instr(v_out_file_name, '/', -1) + 1);
v_file_name := to_char(v_document_num) || '-Previous_PO_Rev.pdf';
utl_file.fcopy(src_location => 'APPS_OUT_DIR',
src_filename => v_out_file_name,
dest_location => 'PO_DATA_DIR',
dest_filename => v_file_name);
-- v_lob_id := to_number(v_document_id);
v_file_on_os := bfilename('PO_DATA_DIR', v_file_name);
dbms_lob.createtemporary(v_temp_lob, cache => FALSE);
dbms_lob.fileopen(v_file_on_os, dbms_lob.file_readonly);
dbms_lob.loadblobfromfile(dest_lob => v_temp_lob,
src_bfile => v_file_on_os,
amount => dbms_lob.getlength(v_file_on_os),
dest_offset => v_dest_offset,
src_offset => v_src_offset);
dbms_lob.fileclose(v_file_on_os);
p_document_type := 'application/pdf;name=' || v_file_name;
dbms_lob.copy(p_document, v_temp_lob, dbms_lob.getlength(v_temp_lob));
EXCEPTION
WHEN OTHERS THEN
wf_core.CONTEXT('ZZ_PO_REQAPPROVAL_INIT1',
'xx_notif_attachments',
v_document_num,
p_request_id);
RAISE;
END xx_notif_attachments;
Please help me find a to the above mentioned error.
Thanks,
SuvigyaThere are two ways to look at what error the PLSQLBLOB API is throwing.
1) Call your PLSQLBLOB API GNE_PO_CREATE_FILE_ATTACHMENT.Gne_Create_File_Attachment directly from a PLSQL block and verify that it returns the BLOB data successfully.
You could also call another WF API that in turn executes the PLSQLBLOB API internally. For example,
<pre>
declare
l_document blob;
l_doctype varchar2(240);
l_aname varchar2(90);
begin
dbms_lob.CreateTemporary(l_document, true, dbms_lob.Session);
-- 207046 - This is the notification id of your failed workflow
-- PO_REPORT - Document type attribute
-- 'text/html' - Content Type being generated for
Wf_Notification.GetAttrBLOB(207046, 'PO_REPORT', 'text/html', l_document, l_doctype, l_aname);
-- Print the size of the document here to verify it was fetched correctly
end;
</pre>
2) Turn on log for SYSADMIN user with following attributes.
Log Enabled = TRUE
Log Level = ERROR
Log Module = wf.plsql%
Restart the Workflow Deferred Agent Listener and Workflow Notification Deferred Agent Listener and run your workflow process. Search for log messages written for above context and you can identify the error at wf.plsql.WF_XML.GetAttachment module with message starting as "Error when getting BLOB attachment ->"
Hope this helps.
Vijay
Maybe you are looking for
-
Query with tables VEPVG, VBAK, VBAP AND KONV
hi all, I have a requirement, that is Open Sale Orders which is having Special Discount. I am trying to write a Query, But KONV table is not coming into the joins. my execution plans is bellow VEPVG --> VBAK vbak-knumv = konv-knumv and konv
-
My notes from my iphone4 have been deleted. Heres the problem, the reason it is deleted is because i accidentally deleted my gmail messages. i guess my notes were there to. the notes are not in icloud and not in gmai. is there any way i can get them
-
Problème d'affichage sur un graph
Bonjour, Dans le cadre d'un projet je dois créé un logiciel d'acquisition de donées via les cartes NI-USB. J'arrive a acquérir les donées que je souhaite mais j'ai un problème d'affichage lorsque que je fait des acquisition a quelque dizaine de Hertz
-
Oracle 8i install - Error in CreateOUIProcess()
I am trying to install Oracle 8i on Red Hat 6.0 Linux system with 96MB RAM and 10GB HDD. When I start the installer I get the message 'Error in CreateOUIProcess(): -1: Permission denied'. I tried both the GUI mode and command line mode and I get the
-
Hi All, Where can I get the basic price of Vendor & Material combination? I check EINA table but didn't get any record their.,Please give the solution as early as possible. Regards, SVP