Workflow launchers for cq:page deletion

Hi,
the workflows in our envionment does not handle deletes and the idea now is to implement a workflow launcher which would track the deletes on cq:page under path /content/<somepath>/. I have configured it as below
enabled: true,
eventType: 2,
nodetype: "cq:Page",
description: "",
runModes: "author",
excludeList: "",
workflow: "/etc/workflow/models/att---page-activation-workflow/jcr:content/model",
condition: "",
jcr:primaryType: "cq:WorkflowLauncher",
glob: "/content/dam/geometrixx"
I am expecting this workflow should get launched automatically in the backend when ever a delete happens but i dont see this happening. Am I missing anything here?
In general how to manage deletes/moves via workflows?
Regards
Rama.

Hi Nicolas,
You are right in what you said. Please read the config as below. I copied a wrong config earlier as I was in middle of experimenting with /content/dam assets and forgot to roll back changes while I posted my qn. You can read the config as below. Still the same issue.
enabled: true,
eventType: 2,
nodetype: "cq:Page",
description: "",
runModes: "author",
excludeList: "",
workflow: "/etc/workflow/models/att---page-deletion-workflow/jcr:content/model ",
condition: "",
jcr:primaryType: "cq:WorkflowLauncher",
glob: "/content/geometrixx/.*"

Similar Messages

SharePoint Error "The security validation for this page is invalid" when delete an item

Hi,
I have SharePoint 2010 setup and works fine until today all of a sudden it throws error "The security validation for this page is invalid" when delete a SharePoint document or list item.
There is no custom event handler deployed on library/list, and it should not be account issue as the same account works yesterday, and even after I turn off security validation from Central Admin, it still doesn't work.
The only change I did is turn off Dynamic Compression from IIS, after that I tried enable back Dynamic Compression but it still doesn't work.
Does anyone know what could be the possible reasons? Thanks in advance.

hi,
in the page just try to make this :
<SharePoint:FormDigest runat="server" />
PrasadWT

Really having problems with organising documents in pages. For example, deleting pages deletes the whole section and I cannot insert a section break as its greyed out & sending an object to background deletes several pages - what the **** is going on???

Really having problems with organising documents in pages. For example, deleting pages deletes the whole section and I cannot insert a section break as its greyed out & sending an object to background deletes several pages and trying to insert a text box autmatically creates new pages- what the **** is going on??? Is this programme really this badly thought out? I thought everything apple was supposed to be intuitive!?!?!? Help.

You can not insert a section break into a textbox.
You appear to have a lot of objects with wrap set, that once you take them out of the flow of text (by sending them to the background) causes the text to reflow and contract into fewer pages. Pages is almost unique in the way it forms up pages in Word Processing mode only so long as there is text on them.
I suspect you probably have hammered away at returns, spaces and tabs as well to position things, which only works to add to the mess.
Download the Pages09_UserGuide.pdf available under the Help menu and swot up a bit on how it works.
You may find this a usueful resource as well:
http://www.freeforum101.com/iworktipsntrick/
Peter
PS There is quite a lot of programming in OSX that is far from "intuitive". Pages is easy at one level, when using the templates, otherwise it can be quite frustrating.

Making a PDF with LiveCycle then being able to edit pages, insert pages, delete pages, attach files to document, be readable in Adobe Reader etc.

We have been working for some time with LiveCycle to creat a documents and have experienced a host of problems with the end product.
1. Images inserted into the LiveCycle PDF document often come up as "broken links" after editing the document and resaving it.
2. Documents will not display in Acrobat reader unless a digital signature is applied to them and the document is re-saved.
3. After making the document, we are unable to use Adobe Pro to insert pages, delete pages, or insert files into the document as attachments.
The end state was to use the simplicity of LiveCycle to create a document and do most of the hard work, and then save it as a PDF document that could be easily edited with Adobe Pro. It has proven difficult, to say the least, to figure out how to make this work.
Thanks in advance for any assistance.

1- Thank you
2- It only seems rational that if I make a form with LiveCycle that I should be able to view it with Adobe Reader or Adobe Pro.
Making a form with LiveCycle to be distrubuted to personnel internally that have Adobe Reader and Adobe Pro and cannot open it without it having a digital signature field in it that has just recently been signed just doesn't make sense. Nor does it seem to make sense to have to purchase 200 additional licenses just for LiveCycle so that people can open a PDF that was made with LiveCycle. If I make it in LiveCycle and only people with LiveCycle can open it, what is the purpose of making it to begin with?
3- This also totally sucks. In a standard Adobe Doc I can at least attach documents to it?
So, what, exactly then, is the purpose of LiveCycle if the only benefit it seems to provide is ease of creation, but the end product has way less functionality?
And how do I go about contacting an Adobe rep on the phone in regards to this without getting "there is no support for this product, go to Adobe.com"
We have millions of dollars of Adobe software and can't get support other than hunting and pecking in these forums? Really?

What is the keyboard shortcut for extract page?

There used to be a series of keyboard shortcuts for page manipulation (and other) - using acrobat 9 till recently. Now new to Acrobat XI Pro (Windows 8.1). I can see the shortcuts for insert & delete page but not for extract page (and other). Am I missing something? The keyboard shortcuts are a must for speed and a healthy right wrist.
Thank-you for your time.

There isn't a direct way of doing it, but you can "hack" it using a script. Create a folder-level script with this code:
app.addMenuItem({cName: "MyExtractPages", cUser: "E&xtract Pages", cParent: "Edit",
cExec: "app.execMenuItem(\"ExtractPages\");", cEnable: "event.rc = (event.target!=null)"});
This will add a new menu item to the Edit menu which you could access using the following keyboard shortcut: Alt+E, X

Need different processes for Update and Delete buttons

I'm using a customized version of the Issue Tracker sample application. I've added a table called project_person(project_id,person_id) so that a project can have multiple people assigned to it and so that one person can have multiple projects. I have a form report that lists all of the projects with an edit link which opens one project. On the individual project page, there are page items for each of the columns in the project table and a item for the person assigned to the project--this item is pulled from the separate project_person table. I have two buttons--Delete and Apply Changes. If you click on Apply Changes, the project table should be updated and then the project_person table if the assignment was changed. If you click on Delete, it should delete the project_person record first and then delete the project record. I created a new conditional pl/sql process that updated two tables if 'Apply Changes' button is cliicked. I then created a separate conditional process when the Delete button is clicked. This conditional process checks to see if a record in the project_person table exists, and if so, delete the record. Then delete the project record.
The update process works fine. The delete process reloads the list of projects with a success message at the top without actually doing a delete and I have no idea why. Does anyone have any suggestions?
I am not using the automatic row processing, but should I? Or is it ok to have the two separate conditions for the two different buttons?

Hello again Miah,
Check the "Sequence Number" for your processes. Typically, APEX will increment by 10, each time you create a Page Process as I recall. You can set this to be any number you want; even if you duplicate the sequence number (ie: you can have multiple Sequence 10 processes).
Make sure that your Delete process is firing properly and walk through the logic in the source code to be sure that any "IF" or "WHERE" logic is satisfied. For example:
Begin
delete from emp_table
where 1=2;
End;If this was your page process code - you would receive a SUCCESS message because the PL/SQL code executed successfully, even though nothing will be deleted since 1 will NEVER equal 2.
So, check Delete Source carefully.
{size:14}{color:green}Can you post the code from your delete page process here?{color}{size}
Good luck,
Don.
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone! :)
Edited by: dfcii© on Oct 27, 2009 10:55 AM

Searching for a page in the site map

Hi all! I'm using an older version of Dreamweaver... MX. I'm
hoping there's a way to do a search for a specific page using the
site map. I have some out-dated pages on a HUGE website I'm trying
to clean up for a local organization. I did a search for orphans,
and they were not listed. Therefore I know they are somehow still
linked to other pages. So I can't just delete them. I need to
update the links. I did this on my local drive, but I need to do it
on the server, as I realized I can't replace all pages on the
server (others have access to it too). Does that make sense?
Anyway, let me know if I can search using the site map for specific
pages. Thanks!
Julie

Do a sitewide find for the filenames. That'll tell you which
other pages
link to them.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"DigitalChick" <[email protected]> wrote in
message
news:fasdd7$e8l$[email protected]..
> Hi all! I'm using an older version of Dreamweaver... MX.
I'm hoping
> there's a
> way to do a search for a specific page using the site
map. I have some
> out-dated pages on a HUGE website I'm trying to clean up
for a local
> organization. I did a search for orphans, and they were
not listed.
> Therefore I
> know they are somehow still linked to other pages. So I
can't just delete
> them.
> I need to update the links. I did this on my local
drive, but I need to do
> it
> on the server, as I realized I can't replace all pages
on the server
> (others
> have access to it too). Does that make sense? Anyway,
let me know if I can
> search using the site map for specific pages. Thanks!
>
> Julie
>

When reading my book on iBooks, I encounter duplicate pages for many pages then it skips the pages that should be there so I am missing large parts to chapters, is this a "bug" in the book or app? How can this be fixed?

When reading my book on iBooks, I encounter duplicate pages for many pages then it skips the pages that should be there so I am missing large parts to chapters, is this a "bug" in the book or app? How can this be fixed?

Does the same thing happen on any other books that you have in the app ? If not then it's probably just that one book, in which can you could try deleting the book and re-downloading it - if it re-downloads in the same state then try the 'report a problem' from your purchase history :http://support.apple.com/kb/HT1933

When i am logging to my company intranet site for every page navigation it is asking for credentials

When i am logging to my company intranet site for every page navigation it is asking for credentials

Also, if the navigation works most of the time but you are prompted for every single image, I suggest restarting Firefox and trying again.
The following also might help in that situation: When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?

Retention periods same for the deletion and for archiving then deletion

Hi,
Is Retention periods same for the deletion and for archiving then deletion.
Can we delete canceled messages directly in XI wihtout archiving them ?
I want only deltion of messages from XI.
Regards
Sree

I want to delete them. No archiving is required.
Check Udo's reply in this thread on how to perform just deletion: Re: How to delete the error message in the Web page Message Monitoring
Process is also mentioned in this help section: http://help.sap.com/saphelp_nw04/helpdata/en/0e/80553b4d53273de10000000a114084/content.htm
Regards,
Abhishek.

IWeb Pages Deleted

Hi Guys,
I run our small Business website using iWeb 2011. Never had a problem until I did a small website change on the home page today. Uploaded to FTP to then find 9 of my 22 pages are missing.
When I re enter iWeb the pages have completely deleted them self.
The URL is www.catz-eye.com & an example is http://www.catz-eye.com/Instructors.html I'm working hard to rewrite these, but (a). I'm looking for some light on how this happened and (b). How to make sure that it does not happen again.
Many thanks for taking the time to read my post and reply

You say that the same pages are missing when you publish your site to a folder on your hard drive?
Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and publish to the folder again and check for missing pages.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
           ▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
          Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
          Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
          File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
          Show Expired Certificates
select it. Otherwise it will show
          Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
          Secure Sockets Layer (SSL)
select
          no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
          When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
          Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
fe80::1%lo0                    localhost
If that's not what you see, post the contents of the window.

Safari is adding a tab for each page visited--how to stop or clear?

Safari is adding a tab for each page visited--how to stop or clear?

Each tab, when selected, has a small x on it for deleting--Apple Store

Since installing firefox, none of my dscktop icons for web page short cuts work. Why?

None of my desktop icon short cuts for web pages work since I installed firefox.
Why?
Can you help me with this?

You can check for issues with the Windows icon cache and try to rebuild the icon cache.
# Open the Task Manager (Shift+Ctrl+ESC)
# In the Process tab, right-click on the Explorer.exe process and select End Process.
# Open the file picker via "File > New Task (Run)" and click the Browse button.
# Type or Paste %USERPROFILE%\AppData\Local (%LocalAppData%) in the File name field (AppData is a hidden folder).
# Select the IconCache.db file and use "Delete" in the right-click context menu to delete the file.
# After the IconCache.db file has been deleted, start a new explorer.exe process via "File > New Task" to get the desktop and Taskbar back.
The IconCache.db file is a hidden file, so make sure that you can see hidden files.
* http://kb.mozillazine.org/Show_hidden_files_and_folders

FRM-40501 ORACLE error: unable to reserve record for update or delete when

Hello.
I have two tab pages and one item on each page. Second tab page item, is mirror item of the first one. I use synchronize property on the mirrored one.
When i try to update mirrored one i get that error: FRM-40501 ORACLE error: unable to reserve record for update or delete when.
How can i solve that?
Thanks

hi dejan,
the error u r getting means that the record cannot be locked. This is ussually caused if u had locked the record from somewhere else (u or another user) or when forms cannot find corresponding column to the base table to lock the record.. U probably r facing the second situation. I'm not sure that forms can commit a change to an item that is synchronized cause synchronized items ignore their base table attribute and just copy their value from the other item.
Why don't u try Copy Value from Item property using <block_name>.<item_name> syntax and your item will have a value copied from the other item but u will have no problem with the db transactions. I suppose..
hope this helps,
teo

Workflow launchers for cq:page deletion

Similar Messages

Maybe you are looking for