Workflow notification delegated to the originator contains an error message in notification content
Hi All,
We are using a workflow for managing User Access Request(to get new responsibilities) where approval hierarchy is set via AME rules.
Facing an issue, when approver has set a vacation rule and to whom the notification delegated happens to be the requester itself.
Notification contains an error message which says like: "Automatic route to <use name> failed. encountered during execution of Generate function 'WF_XML.Generate' for event 'oracle.apps.wf.notification.reassign"
However notification correctly displays its content and also the validation logic that we have put in post notification function while responding to notification is working correctly .
Also If the vacation rule is set to some user other than requester, issue does not appear.
Please guide if faced similar issue or any idea to overcome this.
Thanks in advance!!
Indu
I r-clicked on the error message of the details "Request IDoc : Application document not posted" and selected "Idoc maint in OLTP" and then I saw the error message in the log.
I see that my systems are off a couple minutes.
Should I just reboot these sys's?
DataSource 0TCTIOBJNM_TEXT has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 0TCTIOBJNM_TEXT does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 10/31/2007 11:54:29.
The time stamp in the BW system is 10/31/2007 11:52:10.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Similar Messages
-
I have reset both my torch and playbook back to original only thing that I kept was my contact. And still problems I am a few min away from leave my loved blackberry and going android !! Or heaven help us Phone
Issues 1) playbook wont connect to desktop manager anymore
2) Play book has 2 calendar icons with two different settings on them ??? I have one that is currently working with my yahoo email and calendar account.
3) my Phone when connected to desk top software shows the calendar as read only
4) Unable to update my phone says During an update of the applications on the BlackBerry® smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatisfactory dependencies."
I just want my email and Calendars to work I am tried of spending nights trying to get these deices working !!!
someone please help me. !!
I know you are going to ask I have updated everything last time and it is all as update as it can get.
As for now as I wait I am going to wipe my phone again and just set everything up again !! If I have to even my contacts AHHHH Help I am starting to think crazy thoughtsDid you try to eboot the your PC or laptop where your device is connected ?
I experienced this with my windows laptop, after a failed to do an update, I restart the laptop and my Torch, then retried, and it's worked -
Error message from the source system, Caller 09 contains an error message.
Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....Caller 09 is a very common issue - please search the forums before posting....
Arun -
The segment contains no receivers:: Message no. GA733, in CJWB
Hi,
I am facing one problem in executing KSWB (Plan periodic reposting)
The scenario is like we are transfering the acutal cost to plan cost by cj9cs.
Subsequently , We want to repost the cost from Plan version to Receiver WBSE .
CJ9CS went off succesfully, but when we come to kswb, it is giving the following error.
The segment contains no receivers :: Message no. GA733
We are using PLanned statistical key Figure for the same. We are only using WBS ELements as sender and receiver and are not using activities.
We have created Respective Sender and Reciever WBS Group.
I hav already referered the existing threads on this but of no avail.
Kindly key in your fresh inputs.
Regards
RohitHi Saurabh,
Thanks for revert. However, we are using 6.1 and that not is valid for sap3.x release.
The team has checked the INCLUDE MKGALF01 in se38 and this note is already implemented.
What else could be the reason.
Regards
Rohit -
The segment contains no receivers:: Message no. GA733,
Hi,
I am facing one problem in executing KSWB (Plan periodic reposting)
The scenario is like we are transfering the acutal cost to plan cost by cj9cs.
Subsequently , We want to repost the cost from Plan version to Receiver WBSE .
CJ9CS went off succesfully, but when we come to kswb, it is giving the following error.
The segment contains no receivers :: Message no. GA733
We are using PLanned statistical key Figure for the same. We are only using WBS ELements as sender and receiver and are not using activities.
We have created Respective Sender and Reciever WBS Group.
I hav already referered the existing threads on this but of no avail.
Kindly key in your fresh inputs.
Regards
RohitHi Saurabh,
Thanks for revert. However, we are using 6.1 and that not is valid for sap3.x release.
The team has checked the INCLUDE MKGALF01 in se38 and this note is already implemented.
What else could be the reason.
Regards
Rohit -
Reg:"No result returned or xml returned in the result contains an Error
Dear All,
After adding a query to VC storyboard and than trying to use the option define/test query for this query element, I am facing the below error on pressing the execute button.
"No result returned or xml returned in the result contains an error"
Query is working fine and giving the desired output in BW system.
How can i resolve my problem?
Regards,
Hemalatha J
Edited by: hema latha on Nov 19, 2009 3:21 PMHi Hemalatha,
this can have several reasons, usually there are variables in the query that aren't filled correctly in the "specify filter" box.
One thing you could do is to personalize all variables in the query and then try to fill one after another in the "specify filter" box.
If you don't get values after you have filled a specific one of them, then this one is passed incorrectly.
Best wishes
Markus -
I am trying to figure out if my daughter was the originator of a group message. If you go to iMessages and hit originate a message and type a letter it brings up her contacts as well as groups. Will it only bring up groups if she was the originator or will it bring up any group that she has been in even if she had not created it.
You'll find no issues other than things may not be pre-provisioned for you (the only case where it is important to choose the correct Template is when dealing with Publishing sites and Anonymous access; other templates don't have the ViewFormsLockdown feature
enabled by default, thus potentially disclosing site data in a public fashion).
PowerPivot and PerformancePoint can easily be enabled on standard sites using the Team Site template.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Cannot locate original music file error message???
cannot locate original music file error message ??? i transferred to a new laptop then some of my music collection seems to get this message .
This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
"Caller 09 contains an error message "in Process chain
Hi
Most of my process chains have failed today.All are showing the same error i.e
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
If I am repeating the process it is showing the same error again
Please helpHi,
Even I got the same problem. All you need to do is:
1) Go to Infopackage
2) Update Tab:
Choose: Initialize Delta process
under that choose: Initialization with Data Transfer
3) Save
4) Go to Schedule Tab:
5) Start the Load
6) Refresh the page: /nRSA1
7) Once it is done, then again go to the Update tab of the Infopackage
8) Select Delta Update
9) Save
And now run the Process Chain.
You should be able to run it smoothly.
Thanks & Regards
Hemendra Sharma -
I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your question?
Have you not got the music on your computer and/or on backups on, for example, external drives or CDs/DVDs ?
-
I have tried to update my iPod Touch 4G to the latest update, I currently have iOS 4.1. After the 4 hours an error message appears saying iTunes had lost connection even when I am fully connected to the internet. I have repeated the update 4 times now with not luck. Any ideas?
Thanks in advance
AdamIf you get a network timed out error, try disabling the security software on the computer during the download and install.
You can also try a direct download andinstall by:
iPod, iPhone and iPad Firmware Download
Nera the top of the page aretheinstructions for selecing the download for the install. -
What is the cause of this error message?
What is the cause of this error message?
What is the solution to this problem ?
ThanksFirst part of your question:
Error Message
%CFT_API-3-CFT_ERRMSG_NO_MEMORY: [chars] [chars] [dec]
Explanation
The system was unable to supply the requested memory for flow processing to continue
Recommended Action
Reduce other system activity to ease
memory demands. If conditions warrant,
upgrade to a larger memory configuration.
link:
www.cisco.com/c/en/us/td/docs/ios/system/messages/guide/sm_cn02.pdf
Pretty generic, but its a start, the process in question is cft_flow_lookup.
This may be an indication of a deeper resource issue. -
How long should I let Safe Mode startup run? I keep getting the "disk0s2 i/o error" message and I'm just not sure when to give up and try a different method. I already ran disk utility in Recovery Mode and it said there were no repairs needed but it still kept getting stuck on the apple loading screen.
You have limited opportunity to attempt to create a backup of your created files.
That is what the SafeBoot or safemode appears to allow you -- at the moment.
Since the hard disk drive exhibits signs of failure or other major issues, plan
on a replacement in the near future. You may be able to get the computer to
start up in a regular full OS X (not safe mode) but consider its hours are limited.
An externally enclosed hard disk drive (with own power supply, not relying on
Mac ports to run it) is a good basic means of which to use a disk utility to make
a copy or a Clone of the current OS X. This may help retrieve an archive that
could be used along with a Time Machine backup, to restore your Mac once you
get a new hard drive installed inside.
Good luck & happy computing! -
Hello I Download Adobe Photoshop CC 2014 Last Night
i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message
I Need Help Can You Resolve This ProblemLotfi are you receiving any error messages during the installation? I would recommend reviewing your installation logs for errors. Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. You are welcome to post any specific errors you discover to this discussion.
-
Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before downloading the new Reader version. Suggestions? Thank you.
Hi,
Which version of Adobe Reader were you using earlier when printing using Dell printed was working fine?
Thanks,
Shakti K
Maybe you are looking for
-
In Table Maintaince G/L Text should come by default with G/L Acc.--Ple
Hi Guruu2019s I created Ztable with 3 fields G/L Acc, G/L Acc text and another Zfield. I created a TABLE MAINTAINCE for this. Here we need, after entering the G/L A/C in table maintaince-- G/L Text should come by default. Please su
-
We are the partner of Sun Developer Connection Program. Company: ITI Ltd. Member no: 1024878 We tried to install iPlanet Web Server ver 6.0 Service Pack 3, in Sun Ultra10 Solaris 5.8 machine. During the time of installation it is giving Error: Failur
-
How can I detect when a sub vi finishes
Hi All, I'm new to labview and would like some assistance. I have produced a sub vi that generates 2 half sine wave of adjustable frequency and amplitude. These are cascaded to produce a number of cycles. These are all included in a case statement. T
-
I can sync from pc to ios but not from ios5 to pc
Changes from my computer go to the iphone and ipad, but changes to iphone do not appear in Outlook (Outlook 2010 on Windows 7 PC). There does not appear to be a manual sync option anywhere, nor can I find a time interval setting or any information ab
-
Update 15.0.2 failed
I have also reverted to the status before HTML5 Pack. The update is still failing.