Workflow Worked only for a While

Hi Experts,
I have created a workflow and attached it to a phase . The workflow worked fine ,triggered mail to approver etc,but after a while , when I tested again ,the workflow engine was not triggering mail for approver's I have added .But system is locking the document successfully.
I am not even getting option to approve or reject the document after the system lock.(I have not written any code in pre script to lock the document )
I have seen the Pending Daemon Events in background task Status and it is showing that
ODP_EVENT_WORKFLOW_ENGINE event as pending and it's count is increasing when ever I am running a workflow approval project. To my surprise the pending events row is showing blank in the Next Retry Time and the Retry Count. So I think it might not retry.
I have checked the workflow definition, it worked fine in my trial server.
Any help is appreciated.
Regards,
Uday

Hi Uday,
Once you delete a daemon registration from the daemon registration, the daemon will attempt to start in a couple of minutes. Even if the startup failed, it will keep on trying to restart.This is how the fault tolerant behavior is ensured for daemons. You can be certain that deleting a daemon registration is a non issue & probably it has unearthed an underlying issue..
If you don't see the daemon back in there, there seems to be a persistent error in daemon startup. This could be because the workflow event that was already created is attempted to be executed during daemon start up and it is probably crashing the daemon thread.
Check the following:
- In setup>system information>daemons page, make sure the "workflow" daemon category is enabled. Here the daemon enablement is based on daemon category and not per event type.
- go to the pending events list and see if you see any workflow events that are hanging in there.. if that is case see if you can remove it (don't do this if this a production system &/or the document cannot be locked etc..)
- Look at the daemon alerts page again. there should be some errors if the above 2 or true.
- Look at the application logs in setup>system information>logs
Mostly one of the above should give an hint on this behavior..
Thanks,
Baski

Similar Messages

I am a new mac user and have a 15 macbook pro (non retina display). I am having an issue with safari "freezing" ...it will work fine for a while and then I will open a new tab and attempt a website that won't load and after that it seems no website will.

So yes like mentioned above...i am a new mac user...have only had it about four days and have had a windows based system always before this. The issue I am having is that I will be in safari and it will work perfect for a while and then i will open a new tab and attempt another website and it will either be extremely slow or will give the error that it cannot connect to the server, however, when i run diagnostics my internet is fine. The only solution i have found is to reboot and geeksquad has been unable to replicate the problem while connected to my computer to try to do so. Does anyone have any suggestions or anyone else with this problem? If you have a "fix" please try layman's terms because again I have no idea about macs haha. Thanks,

So yes like mentioned above...i am a new mac user...have only had it about four days and have had a windows based system always before this. The issue I am having is that I will be in safari and it will work perfect for a while and then i will open a new tab and attempt another website and it will either be extremely slow or will give the error that it cannot connect to the server, however, when i run diagnostics my internet is fine. The only solution i have found is to reboot and geeksquad has been unable to replicate the problem while connected to my computer to try to do so. Does anyone have any suggestions or anyone else with this problem? If you have a "fix" please try layman's terms because again I have no idea about macs haha. Thanks,

My ipod classic 160gb will be playing fine then it sometimes freezes up or start shuffling through the songs not playing at all. After i reset it works ok for a while then same thing. Bought this so i could control through my steering wheel/radio.

I sure hope someone can help me with these ipod classic 160gb issues.
My ipod classic 160gb will be playing fine and then freeze up (unable to move around in it at all) and i have to reset it. This happens constantly whether in my car or when i listen at work. After i reset it works ok for a while then eventually requires another reset.
Another problem is that it will be playing fine and then start shuffling through songs without playing them. The songs that get shuffled work fine in the itunes program but not on the device. A reset does not correct the problem with these particular songs.
Also, sometimes when it is working and not freezing up or shuffling through, it will appear that a song is playing (in fact it says "now playing"), the song titlte is scrolling, but the song progression bar does not move. The count up in front of the bar stays at 0:00, and the count down at the end of the bar stays at the song length minutes not counting down. After I reset, it works fine and all the songs will play.
The reason I got this thing was because i can control it through my steering wheel/radio while i'm driving. I previously had a Zune 80gb which i'm glad I held on to. I have over 6600 songs (so I'm obviously a serious music listener and obviously frustrated), but only about 10 songs were downloaded through itunes, the rest I either ripped or downloaded from other site. From what i've been reading it sounds like there's a lot of ipod owners out there experiencing similar problems. Does anyone have any suggestions to resolve these issues for me and everyone else? I got my first iphone 8 months ago, then the ipod and was considering an ipad. But in light of my ipod issues.....
I hope someone can help me and convince me it wasn't a mistake to go Apple! Thanks!!

I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

TS1741 Does anyone have trouble with the Remote app losing contact with the iTunes library after it has been connected and working fine for a while. If I go to the computer and turn off sharing, then turn it back on, it will relocate the library again.

My iTunes remote app on my ipad mini will work fine for a while and then it will lose the library. I then have to turn off sharing on the computer and then turn it back on. This will work for a while and then I will have to repeat the process. Help!

I have just found the problem to be windows firewall on my library PC
I can only presume there has been an update to windows firewall or iTunes
all the relevant programs were on the allowed list
I'm now currently running with firewall turned off on my library PC.
I'll update when i have found the rogue setting.

How do I keep a page as my home page when dragging icon to left of URL to house image & confirming that I want it as home page works only for current session, so when Firefox next opened, I end up with some stupid search page which McAfee doesn't like?

A couple of days ago, I connected to the Internet as usual & opened Firefox, only to be greeted by an almost blank screen with a Google-type search box in the middle & this message from McAfee:
"Your default search settings have changed. This may pose a security risk. Would you like to restore them to McAfee Secure Search to provide a safer searching experience?"
instead of my usual home page (BT Yahoo). I naturally clicked on the "Yes" option in the message, but rather than restoring my BT Yahoo home page, all that did was to insert the McAfee logo to the left of the search box in the top right-hand corner of the screen. The first time it happened, I had to search for the BT Yahoo page & then followed the standard procedure for setting it again as my home page. It worked only for that session: each time I shut down Firefox or restarted my computer after that, all I got was the blank "search page" & restoring the previous session was the only way to get back to BY Yahoo. How on earth do I make the home page setting permanent?
As far as I'm aware, I have done nothing to alter my search settings. However, I am anything but computer-literate, so I may have done/pressed something without realising it, but trying to understand what is now happening is far beyond my limited IT skills.

See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.

HT201406 IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even powe

IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even power if off. I can't access the hardward ID which Apple support seems to require for Chat.
It might have happened when I was accessing my camera bypassing the lock screen!
All I know is that the thing is now useless and it looks like I will have to wait for the battery to run down to see if powering it back up afterwards will solve the problem.

I have since discovered the "hold down home key and power button" together for a few seconds and this seems to have worked .... phew!

Master Page: Alternatives (Subform Set) works only for the first page

Hi everybody!
I have bumped into a very weird problem with ADOBE Forms:
When I create an 'Alternative' in a Context area and then place it on a Master Page, it works only for the first page. On the rest of pages it always show the 'TRUE' subform, regardless of the condition (which is not changed, of course). Absolutely the same Alternative works perfectly in a Content area for all pages.
Has anybody seen something like this? Any ideas why?
Thank you!

This happens because of the processing of the form.
You can see this here:
LiveCycle ES2 * Adobe LiveCycle Designer ES2
You have to put a own variable, which is set with the value you want in the very beginning.
I know, it is not that logical in the first moment, but it makes sense.
Regards
Florian
PS: This space SAP Interactive Forms by Adobe is the correct for questions like that

I am developing a book via email with a collaborator. iBooks Files are sent to me via a link to preview on iPad. This worked fine for a while but now getting download errors and the unhappy mac face saying download failed. Any ideas?

I am developing a book via email with a collaborator. iBooks Files are sent to me via a link to preview on iPad. This worked fine for a while but now getting download errors and the unhappy mac face saying download failed. Any help appreciated. Very frustrating!

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Got new ATV and all set up. It keeps loosing connection with iTunes on laptop and have tried everything suggested in set up guide. It works fine for a while then the iTunes account vanishes from 'computer' menu TV screen. Full Wifi signal on both devices

Got new ATV and all set up. It keeps loosing connection with iTunes on laptop and have tried everything suggested in set up guide. It works fine for a while then the iTunes account vanishes from 'computer' menu TV screen. Full Wifi signal on both devices so can't think what could be causing it to happen. Any suggestions please?

Sorry, I updated another thread I was a part of but didn't update my own thread.....ughhh!
I updated all of my ATV 2's and 3's to the latest firmware when it was released and have been problem free since. I do believe the major issue of not being able to connect after a period of inactivity has been corrected with the latest ATV firmware.
I can look at my network connection table using "netstat -an" in a CMD window and I do not see the massive number of connections I saw before the update.
Here is a link to the other thread I was referring to above:
https://discussions.apple.com/message/19952545#19952545
Have you applied the latest firmware updates to your ATV 3's?

I cloud worked fine for a while on the latest version of windows then threw up an error since then I can longer get the programme to run . I've reinstalled itunes but this doesnt help any ideas

I cloud worked fine for a while on the latest version of windows then threw up an error since then I can longer get the programme to run . I've reinstalled itunes but this doesnt help any ideas

It maybe worthwhile trying to uninstall and then reinstall the icloud control panel, if the issue is with your outlook.

Flash Player works only for Local Admins

Hi!
We have about 40 computers in our organisation with the same problem: Since few weeks the Adobe Flash Player (ActiveX) works only, when the user has administrative privileges. If a normal user wants to watch youtube-films or other flash objects, there will only appear a message that (a new) Adobe flash player must be installed to view the content (or so). It looks like there is no Adobe Flash player installed. But if the user is a local admin, everything works fine - on the same computer.
Under Software Adobe Flash Player is displayed as installed.
We have WinXP Professional SP2/SP3 32bit running on 4-year-old Maxdata computers. And few new computers (also WinXP Professional SP2/SP3 32bit)
Confusing: There are few computers where flash works for everyone! It seems, that especially the computers that are new don't have this problem.
I've tested everything: Using the MSI-file, using the EXE-file. Uninstalling the MSI, uninstalling the EXE. Using Version 14, 16 and now 26. Uninstalling everything by the offical Adobe flash player uninstaller. Installing the software as administrator, installing the software via GPO. I've deleted system32/macromed/flash. I've used Microsoft subinacl - with the offical adobe reset_fp10.cmd. I edited system32/macromed/flash so that everybody has write rights on this folder.
But nothing works. It's always the same: Videos in the IE are only shown for admins.
And now, I've no idea, what else I could do?!
Anyone else?
Greetings from Germany
Peter

Pat, is this the one?
http://forums.adobe.com/thread/729200?tstart=0
eidnolb

JSP - useBean tag works only for first request

hey why donnu change the scope to PAGE, give a try.........
          Vishal Vishnoi wrote:
          > Using Weblogic 5.1 I am trying to work with a simple example of a JSP
          > page which has got a usebean tag. The tag is
          >
          > <jsp:useBean id="resourceTypes" type="java.util.ArrayList"
          > scope="request" />
          >
          > * This works only the first time I load the page.
          >
          > If I try to load the page again. I get the following error
          >
          > javax.servlet.ServletException: Could not find bean 'resourceTypes',
          > type 'java.
          > util.ArrayList' in scope
          >
          > --Vishal

My firefox starts and works normally for a while then all of a sudden it switches to safe mode. I restart the computer and the same thing happens again.

When I restart the computer as before it works normally for a few minutes then all of a sudden it's in safe mode again. It just started doing this a few days ago, I never had a problem before and it's really annoying as I end up having to restart my computer every few minutes.

Try to update firefox to the latest 12.0 and check it again. If you have the problem again try to a new profile see: [http://support.mozilla.org/en-US/kb/Managing-profiles Managing profiles] , see also: [http://support.mozilla.org/en-US/kb/Profiles Profiles] .
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

How do I tell itunes (on a Windows XP PC) to start adding downloaded files to an external drive ? Starting itunes while pressing the shift key and then choosing works only for a MAC, I think. I only need this one final step. All is copied already

How do I tell itunes on a Windows XP PC to start downloading new songs to my external drive ? The whole library has already been moved. I am just one final step away. Everything I`m downloading still lands on C: Relaunching itunes while pressing "shift" and then getting prompted to choose library might work for a Mac, it doesn't for Windows.

In iTunes click on 'Edit', then 'Preferances', Click on the 'Advanced' button, change the entry in the 'iTunes media folder location' to point to your external drive.

I have upgraded to IOS5 and installed imessaging, it worked ok for a while and now it seems only to work occasionally or sometimes not at all. Is there any use in having software that doesn't work. I am not the only person who has this fault,

Hi , does anyone know how to fix the problem with imessages. Sometimes it works and more often than not it doesn't. I upgraded my iphone 3gs a couple of weeks ago and the imessaging worked splendidly but now it hardly works at all. Both my daughters have the same problem and it isn't the wifi coz they live in different parts of the country.
Any help on this matter would be apppreciated as its doing my head in
I have an iphone 3gs and my daughters have iphone 4's.
I have reset my iphine but to no avail
Regards
cfcspark88

Hi Louise, sorry to hear of your problems. This is not Adobe. We are mainly support volunteers, other users like you, trying to help one another. You need to contact Adobe directly for activation and licencing issues. Click the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on. Don’t let them pass the buck. Stay connected and ask to speak with a supervisor if necessary.
Click here to get help now Contact Customer Care

Workflow Worked only for a While

Similar Messages

Maybe you are looking for